SQL Server 2008 :: Creation Of Random Password Which Is Easy To Remember

Jun 2, 2015

I have written a script to GENERATE Random Password. But I want to modify that to a some kind of password which is little easy to remember!

I have seen some of the online sites where they generate passwords which are easy to remember and having some way to remember them,

my script:-
declare @db_pswd nvarchar(4000);
declare @len1 int = 16,
@min tinyint = 40,
@range tinyint = 74,
@exclude varchar(50) = '11cdtyuXR#0:;<=>?@O[]`^/abfty#$%^&1234567890*',
@output varchar(500)

[Code] .....

View 4 Replies


ADVERTISEMENT

Data Access :: How To Recover Forgotten Password When Remember Password Option Checked

Jul 24, 2015

I have connected to Database using my credentials by checking remember password option. After few days I forgot my password. How can I recover the password as SQL remember it. Is there any way to recover my password instead of resetting it.

View 3 Replies View Related

Remember My Password Is Forgetting Password

Mar 11, 2008

On the login prompt for Report Server, there is a checkbox option to "Remember my Password." I check this, login successfully... but when returning to the Report Server, I am again prompted for the password, although the user name is saved. No matter how many times I do this, the password will not save in IE7. I have tried this on 3 different computers with IE7. In IE 6, I do not even get the checkbox as an option, just the user name/password prompt. In Firefox, the password saves fine. Any ideas what would be causing this?

Thanks,

Brian

View 1 Replies View Related

SQL Server 2008 :: Random GUID And New SequentialID

Mar 20, 2015

I have a DB using random GUID values as a PK. I know it should not be that way but it is third party and I am trying to persuade them to do something else, like a sequential GUID using NEWSEQUENTIALID. My question is this. Since I have GUID values already in the database, if we change the table definition from simply uniquidentifier to NEWSEQUENTIALID what is to keep NEWSEQUENTIALID from generating a GUID that already exists and creating a PK violation?

View 3 Replies View Related

SQL Server 2008 :: Random Blocking In One Table

May 1, 2015

We have a SQL Server 2008R2 system that has heavy usage to one specific table. I have tuned basically all I can as far as making sure SQL Statements are using good indexes. From time to time a group of folks will log into Mgt Studio and run SQL Statements like this, leave the query open and once in a while it will cause blocking to other SQL running our online system

The query is like this: select ID,* from tablename with (nolock) where ID like 'MSPRYy%'

The results come back within less than 1 second. However, they leave this window open which is what causes this to be a HEAD BLOCKER and blocks other SQL Statements from running.

View 6 Replies View Related

SQL Server 2008 :: Easy Way To Compress Backup File?

Jul 15, 2015

easy way to compress backup file. I use SQL Server 2008 R2

View 4 Replies View Related

SSIS Package Does Not Remember Password (OLE DB Connection + ADO.Net Connection)

Mar 29, 2007

Both the OLE DB Connection and ADO.Net Connection in SSIS Package does not remember password.

Im connecting to a SQL Server 2000 box using its sa password as test.

The SSIS package runs fine when you first set up the connection in bids

The bottom line is that SSIS keeps forgetting the password I feed into
the two Connections that I'm using. I double-click a connection,
type the password in, check "Save my password" and hit "OK" but the
password disappears from there whenever I run the package or
double-click the connection again.



is there any known workaround for this issue as I would like to schedule my SSIS package using a SSIS Step in a SQL Server 2005 Agent job.



the only thing I found when googling this error was link below but the workaround described here is a little harsh

http://www.developersdex.com/sql/message.asp?p=1921&ID=%3C1146409399.447345.7470@j73g2000cwa.googlegroups.com%3E




thanks in advance

Dave



the box SSIS is running on is Windows 2003 Server Standard Edition latest service pack

SQL Server 2005 (no service packs )





View 14 Replies View Related

SQL Server 2008 :: CAST (INT AS DATETIME) - Random Numbers

May 20, 2015

While trying to solve a SQL challenge I found myself trying to understand what is happening when you CAST a INT to date time.

Trying to understand the results. Here are some random numbers and Castings. My question is why do they produce the datetimes they do?

SELECT CAST((1.1) AS DATETIME)
SELECT CAST((200) AS DATETIME)
SELECT CAST((15) AS DATETIME)
SELECT CAST((99.99999) AS DATETIME)

View 9 Replies View Related

SQL Server 2008 :: Easy Way To Compare Contents Of Objects Between 2 Different Databases?

Jul 20, 2015

Is there an easy way to compare the contents of objects between 2 different databases? For example, say I had 2 databases, My_DB_1 and My_DB_2, each with a SEC_User table. Say I wanted to do an object-to-object comparison between databases to see if there were any differences. Here's some sample SQL:

use My_DB_1
select * from sys.dm_sql_referencing_entities('dbo.sec_user', 'object')

use My_DB_2
select * from sys.dm_sql_referencing_entities('dbo.sec_user', 'object')

Say that the result sets above both returned a SEC_GetUser sproc object ref. Is there a way to write SQL that will compare the SEC_GetUser sprocs (and other objects in the above rowsets) from both databases? For example, if My_DB_1.SEC_GetUser returns an extra column in the result set than My_DB_2.SEC_GetUser then I'd like my comparison SQL to return a single column "IsDifferent" with SEC_GetUser as a row....

View 1 Replies View Related

SQL Server 2008 :: Creation Of XML File With Data In Table

Jun 1, 2015

I want to create a XML file with data in my table. I have a question about tags.

SELECT
-- Root element attributes
'http://tempuri.org/Form.xsd' AS 'xmlns',
'http://www.w3.org/2001/XMLSchema-instance' AS 'xmlns:xsd',
(
SELECT
-- Creating a default element

[Code] ....

This is my query. When I use 'xmlns' namespace the result is below:

<Form xmlns="http://tempuri.org/Form.xsd" xmlns:xsd="http://www.w3.org/2001/XMLSchema-instance">
<Veri xmlns="">
<Satir>
<Id>1</Id>
</Satir>
</Veri>
</Form>

I dont want to see 'xmlns' in 'Veri' tag. When I use xmlna or another word instead of 'xmlns' the result is below:

<Form xmlns="http://tempuri.org/Form.xsd" xmlna:xsd="http://www.w3.org/2001/XMLSchema-instance">
<Veri>
<Satir>
<Id>1</Id>
</Satir>
</Veri>
</Form>

How can I remove 'xmlns' from 'Veri' tag while using it in 'Form' tag

View 2 Replies View Related

SQL Server 2008 :: Automate New Partition Creation In Table Partitioning?

May 8, 2013

we planning to create partitioning on existing tables. The partitioning is on date column, there should be one partition for each year.

Creating of new partitions should be automated, and also we dont have any plans of archiving old data, all we want is that new partition creation should be automated.

View 6 Replies View Related

SQL Server 2008 :: View Creation Using XML Column On Linked / Distributed Server?

Sep 4, 2015

A recent SharePoint upgrade has rendered several views obsolete. I am redefining them so that our upper level executive reports show valid data.(yes, I know that doing anything to sharepoint could cause MS to deny support, having said that, this is something I've inherited and need to fix, pronto) The old view was created like so:

USE [AHMC]
GO
/****** Object: View [dbo].[vwSurgicalVolumes] Script Date: 09/04/2015 09:28:03 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE VIEW [dbo].[vwSurgicalVolumes] AS
SELECT

[code]....

As I said, this view is used in a report showing surgical minutes.SharePoint is now on a new server, which is linked differently (distributed?) I've used OPENQUERY to get my 'new' query to work;

SELECT *
FROM OPENQUERY ([PORTALWEBDB], 'SELECT
--AllLists
AL.tp_ID AS ALtpID
,AL.tp_WebID as altpwebid
,AL.tp_Title AS ALTitle

[code]....

My data (ie surgical minutes, etc) seems to be in the XML column, AUD.tp_ColumnSet . So I need to parse it out and convert it to INT to maintain consistency with the previous view. How do I do this within the context of the view definition?Here is a representation of the new and old view data copied to excel :

<datetime1>2014-08-14T04:00:00</datetime1><float1>2.000000000000000e+000</float1><float2>4.190000000000000e+002</float2><float3>1.600000000000000e+001</float3><float4>8.110000000000000e+002</float4><sql_variant1 xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:sqltypes="http://schemas.microsoft.com/sqlserver/2004/sqltypes"

[Code] ....

can't format it to make it look decent. InHouseCases =2, InHouseMinutes=419, OutPatientCases =16, OutPatientMinutes=1230. This corresponds to the new data I can see in the XML column; 2.000000000000000e+000 is indeed 2 and 4.190000000000000e_002 is indeed 419.

View 4 Replies View Related

SQL Security :: What Is Alternative Of A Login Whose Password Goes Missing In Server 2008 R2

Jun 5, 2015

We  have a situation where SSRS reports are using Testuser account to run the SSRS reports for every user who has access to these reports.Now developers need the password for this login Testuser to proceed with their ssrs reports development, but its sort of mess that no one has password ever saved.So in case is there a way it can be retrieved or what should be an alternative if password cannot be retrieved for that login, as i believe changing the password will break the reports using the current password?

View 7 Replies View Related

SQL 2012 :: Windows 2008 Evaluation Default Username / Password?

Nov 19, 2014

i have installed windows 2008 evaluation, during installation i was not asked for username and pssword but when i try and start up its asking for administrator password.

View 0 Replies View Related

Returning Random Records And NOT Similar (random Questions)

Jul 20, 2005

Hi,I need to extract randomly 5 records from the table "Questions". Now I useSELECT TOP 5 FROM Questions ORDERBY NEWID()And it works. The problem is that I need an additional thing: if SQLextracts record with ID=4, then it should not extract record with ID=9,because they are similar. I mean, I'd like something to tell SQL that if itextracts some questions, then it SHOULD NOT extract other ones.How can I do it?Thanks!Luke

View 1 Replies View Related

SQL Server Agent Job Will Not Retain Package Password (encrypt Sensitive With Password)

Apr 1, 2008

I have a package protected by a password - I am already unhappy that to get it to use the configuration file to change connection strings for the production servers I have had to hardcode the password into the config file - very insecure!
However, the package now deploys correctly to the production server and will run from there OK, but NOT if scheduled as a SQL Server Agent Job. Thus is because however often I edit the command line to include the password after the DECRYPT switch (which it has prompted me for when I click on the command line tab), the Job Step will not retain it.
If I open it up after I have edited it and closed it, the password has disappeared.

I know that if I run dtexec plus the code in the Command Line tab (with the password), the package runs OK.

This is driving me insane!
I have read all the other posts and so I tried replacing the SSIS package step with a CmdExec step and pasting that code into there - then I get an OLEDB error..

The code I use is:
DTEXEC /SQL "ImportRateMonitoringTables" /SERVER servername /DECRYPT password /CONFIGFILE "D:Microsoft SQL ServerSSISDeploymentsRateMonitoringImportTasksDeploymentImportRateMonitoringTables_Production.dtsConfig" /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING E

and I get

SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x8000FFFF

although the same code executes perfectly from a command prompt.

Please does anyone have any experience with a similar problem and if so, how did you get round it?

Thank you

View 9 Replies View Related

The Sa Password Must Meet SQL Server Password Policy Requirements.

Jun 30, 2007

I tried to install an ALLDATA database which run with SQL Server 2005 express edition. The data base fails to install becase of the following code that come up which is related to AS password requirement. The error that come up is:



TITLE: Microsoft SQL Server 2005 Setup
------------------------------

The sa password must meet SQL Server password policy requirements. For strong password guidelines, see Authentication Mode, in SQL Server Books Online.

For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&ProdVer=9.00.2047.00&EvtSrc=setup.rll&EvtID=28001&EvtType=sqlca%5csqlcax.cpp%40SAPasswordPolicyCheck%40SAPasswordPolicyCheck%40x6d61

------------------------------
BUTTONS:

&Retry
Cancel
------------------------------


I am trying to install this database in a network server operating under Windows Server 2003 R2 with SP2. If anyone knows how to solve this problem, please let me.



Thanks,



Amilcar

View 6 Replies View Related

I Don't Remember How It Was...

Jun 1, 2006

Using this system function (::fn_dblog(null,null)) you find out how many transactions are been confirmed in your .LDF. Although by means of another system function you can see further information, i mean statistical ones.

Any help would be very appreciated.

View 1 Replies View Related

Can't Remember How To Pass Int Value To Datasource

Sep 22, 2007

I have know this error but have completely forgotten how to take care of it.  How do I pass the integer values to the SQL statement?
ERROR: Syntax error converting the nvarchar value 'Label' to a column of data type int.
WHERE (LinkInfo.L_State = @State) AND (LinkInfo.CG_ID > @CatIDLow) AND  (LinkInfo.CG_ID > @CatIDHigh)
<SelectParameters>            <asp:ControlParameter ControlID="TextBox1" Name="State" PropertyName="Text" />            <asp:ControlParameter ControlID="Label2" DefaultValue="0" Name="CatIDLow" PropertyName="Text" />            <asp:ControlParameter ControlID="Label3" DefaultValue="1899" Name="CatIDHigh" PropertyName="Text" /></SelectParameters>
CODE  BEHIND
public partial class TopandBottomSelect : System.Web.UI.Page{    int CG_IDlower;    int CG_IDupper;        protected void Page_Load(object sender, EventArgs e)    {    }    protected void RadioButtonList1_SelectedIndexChanged(object sender, EventArgs e)    {        if (RadioButtonList1.SelectedIndex == 0)        {            CG_IDlower = 0;            CG_IDupper = 1900;            Label1.Text = Convert.ToString(CG_IDlower);            Label2.Text = Convert.ToString(CG_IDupper);        }        else        {            CG_IDlower = 1899;            CG_IDupper = 3000;            Label1.Text = Convert.ToString(CG_IDlower);            Label2.Text = Convert.ToString(CG_IDupper);        }        GridView1.DataBind();    }}
 
Thank you

View 3 Replies View Related

How To Remember Last Record Read

Jul 23, 2005

Hi,Can you guys see if there's a solution to this problem?I have a database from which I have to read each record and processthat record. New records are being added all the time, so I need to goback and check for new records and process them.However:-- there is no 'identity' column in the database design (so I cannotkeep track of the last record read by use of a numeric variable)-- I am not allowed to update the database (so I cannot flag therecords I have read).My problem is: how can I know which records I have already read andwhich ones I haven't read yet? I don't want to process records twiceand don't want to miss any records.Is there a known solution to this problem? Any ideas?Thanks.

View 12 Replies View Related

Installation - Can't Remember One Of The Things I Installed...

Feb 21, 2008

Hello,

A while ago I installed SQL CE on my decive. Unfortunately, it crapped out at one point so I'm reinstalling what needs to be put back on. I'm pretty sure I just used the CAB files to do this (but I might be mistaken). In any case, I remember there being an application that allowed me to do queries, browse data, etc. on my device's databases... I'm pretty sure it was just something included with SQL CE.

I already have the CF installed. I have all of the SQL CE CABs installed as well (I think)... but for some reason I simply cannot remember what CAB or other installation that would contain the browser, query creation thing, and so on...

Anyone have any idea what I'm rambling on about? Thanks!

View 1 Replies View Related

URGENT - Random 10 From Random 20 (2 Tbls)

Oct 14, 2004

I'm using ASP and SQL Serv 2000. What I need to get from 2 tables (company & customers) is random 10 customers from random 20 comp.
Anyone got an idea how to do this??? I've spent 2 days trying to get stored proc. or T-SQL to work, but nothing good came out of it. I can get 1 comp and 10 cust, but not a grouped list of 20 comp. w/ 10 cust. each.

Help is greatly appreciated.

View 1 Replies View Related

SQL 2012 :: Simple Way To Remember Primary And Foreign Key?

Dec 15, 2014

What is the simple way to remember Primary and foreign key?

Why is the ID column in a table declared as a integer datatype?

View 2 Replies View Related

Remember Expansions/drilling Level Between Subsequent Runs Of A Report.

Mar 9, 2007

Hi all,

I have a report in which the user can drill down on data. However when the user changes a parameter and reruns the report, all nodes are collapsed again. Is it possible to let the report keep the expansion state of nodes after pressing the 'view report' button again?

Regards,
Henk

View 1 Replies View Related

Equivalent To MySQL's Password() Function? (was MySQL To SQL Server And Password())

Mar 3, 2005

I have an internal Project Management and Scheduling app that I wrote internally for my company. It was written to use MySQL running on a Debian server, but I am going to move it to SQL Server 2000 and integrate it with our Accounting software. The part I am having trouble with is the user login portion. I previously used this:


PHP Code:




 $sql = "SELECT * FROM users WHERE username = "$username" AND user_password = password("$password")"; 






Apparently the password() function is not available when accessing SQL Server via ODBC. Is there an equivalent function I could use isntead so the passwords arent plaintext in the database? I only have 15 people using the system so a blank pwd reset wouldn't be too much trouble.

View 7 Replies View Related

Easy Problem :SQL SERVER Connection

Apr 8, 2008

I installed Visual Studio 2005 and an SQL Server 2000 enterprice.
I called my SQL-Server instance "PALAGSQL".   My computer is called "PEARL"
when I try to create a connection in VisualStudio2005   ,I put Server-Name :  "PEARL/PALAGSQL" 
 .......but I  receive error 40 "Could not open a connection"
What did I miss ?
What shall I do.
 
Experts help.

View 1 Replies View Related

Real Easy Newby Q: SQL Server

Oct 28, 2005

This Q is so easy I can't find the answer anywhere!
Why is SQL Server called 'Server' ? I understand it is a lot more capable and robust than Access but where does 'server' come into it.
I currently use ASP and Access for dynamic websites but it is time to move up a notch.
Do I just buy SQL Server, make a database, upload it to the same place as before and hey presto?
can I run lots of websites (on different domains and servers) from databases created with my single license standard edition?
Thanks
M

View 5 Replies View Related

Easy Question About Server Log Files

Feb 2, 2004

SQL Server 2000 running on Windows 2000

Is there a way to set up the SQL Server Log files so that it automatically creates a new one (or overwrites the old one) when the old one is full?

We keep having people shut out of our web site due to the log file being full. Since we have no DBA I volunteered to try to find out how we can avoid this faux pas in the future.

Thanks for your help!

View 6 Replies View Related

Easy Data Entry In SQL Server

Jan 22, 2006

Hi all,

I have been using SQL Server 2K for a couple of months now and I have been entering data into my tables through Enterprise Manager. I do this by selecting the table, right-clicking on it, and selecting Return All Rows.

After months of use, this method of entering data has become tedious and cumbersome. Is there an easier way to enter data into SQL Server? I don't know how to program Visual Basic, but I know how to create dynamic websites.

Microsoft Access offers the ability to make Forms, so that data entry is easier. Can SQL Server offer anything similar? Maybe SQL Server 2005 offers a GUI for data entry?

Cheers for your help!

View 11 Replies View Related

Easy SQL Server Version Identification

Sep 17, 2007

I know about @@version and SERVERPROPERTY, but I am looking for a query that will determine between SQL Server 2000 and 2005. I need to write an if/then statement and don't want to have to add all of the 9.xxx.xx versions for 2005 and keep that updated with each hotfix that comes out.
-Kyle

View 3 Replies View Related

Can I Run SQL Server 2008 - Reporting Services CTP Until Microsoft Sells SQL 2008

Mar 31, 2008

There are a few features in the new SQL Server - Reporting Services that I really need in production. I have tested everything and it works great. I am running the CTP version since Microsoft is saying they aren't releasing the release version until 3rd quarter 2008.


Since Microsoft won't sell SQL 2008 until 3rd quarter, can I run the CTP in production until the release and then purchase SQL 2008?


Jim

View 1 Replies View Related

Selecting Random Data From Sql Server

Jan 21, 2008

 I have three tables that are joined together to retrieve a piece of data.Table One has the columns pid1(PK), idTable Two has the columns pid1, qid1, idTable three has columns qid1, question, answerHere is my sql statement:SELECT  Table1.pid1, Table2.qid1, Table3.Question FROM Table1 JOIN Table2 ON Table1.pid1=Table2.pid1 JOIN Table3 ON Table2.qid1=Table3.qid1 WHERE Table1.pid=...(N)I put an elipsis because I'm stuck on how to proceed from here.  See I need to randomly select a value from column pid1 in table1 then use this value to replace N in the sql statement, then have the statement run and randomly return exactly one piece of data instead.Is this possible? How can you randomly get one piece of data from joining three table without a WHERE CLAUSE. 

View 1 Replies View Related

SQL Server Random Rows Returned

Sep 23, 2004

As a part of my unpaid internship, I am creating a ASP.NET interface for a MS SQL Server 2000. The table I am having problems with has over 750,000 rows by 26 columns. There isn't a primary key. It stores a transaction dump from another primitive Database server.

Problem:

When perform a query I get one set of results. I run the same query again after a short wait and the rows returned are in a different order. The majority of the rows returned are the same ones returned in the previous query. Only, some rows may be missing and the order may change.

I really wasn't surprised by some duplicate rows. I am confused why they are showing up in a different order and the above mentioned inconsistancy in results.

I thought I was having problems with my Repeater Control; however, SQL Query Analyzer returns the same results.


Question:

What is causing the problem?

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved