SQL Server 2008 :: Function To Replace Data In A Column With X Based On LEN Of Data
Sep 4, 2015
I need to create a function that replaces the data in a column with an 'X' based on the LEN of the data in the column. I created one that does a replacement, but it fills the column based on the max data length, and not the current length of the string or integer. An example of what I'm trying to accomplish.
Original data in a varchar(30) column:
thisisavalue
thisisanothervalue
thisisanothervalueagain
shortval
replaced with
xxxxxxxxxx
xxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxx
xxxxxxx
My current function is replacing the data like this:
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
View 4 Replies
ADVERTISEMENT
Apr 14, 2004
What is the correct syntax to replace a field data nvarchar(50)
Current data = 0020-10-02
Change = 2003-10-02
Thank you in advance.
View 8 Replies
View Related
Aug 10, 2015
I'm trying to load data from old SQL server 2000 to new SQL server 2014. I need to do a checksum to check if all the source data is loaded in the target database(SQL server 2014). I've created the insert statement for the same which works. I need to use checksum to make sure all the source rows are loaded in the target table. I haven't done checksum before.
Here is my insert statement:
INSERT INTO [Test].[dbo].[Order_tab]
([rec_id]
,[date_loaded]
,[Name1]
,[Name2]
,[Address1]
,[Address2]
[code]....
View 2 Replies
View Related
Feb 10, 2015
I was wondering if there was a way to redirect an insert to another column...
Example:
Original Insert Statement:
INSERT INTO [table] ([columnA], [columnB])
SELECT '2015-01-01 00:00:00', 99.99
We have changed [columnB] from a decimal(19,9) to a computed column. So instead, we added another column [ColumnC] to take [ColumnB]'s insert data. I thought we could've used a trigger instead of insert, but that fails with the message "cannot be modified because it is either a computed column or is the result of a UNION operator".
This is the trigger I was using:
CREATE TRIGGER [Trigger] ON [table]
INSTEAD OF INSERT
AS
INSERT INTO [table] ([columnA], [columnC])
SELECT [dataA], [dataB]
FROM Inserted
View 4 Replies
View Related
Feb 29, 2008
Hi, I was wondering if it is posible as in derived columns to replace an input column with the output one in Data Conversion?
What I can see that when a data conversion is done, only we can do it in a new column and not in the same one we are using as input.
Do you know if this it is posible?}
Thanks for your help!
Beli
View 3 Replies
View Related
Aug 3, 2015
I'm working on a query in which I need to get few nodes values from the XML data by using the value from SQL column (MessageContentType) in this query. I'm able to get the nodes value when i hard code the value in the query but the problem is MessageContentType will vary from some records in the table, due to that I'm not getting the corresponding node values. I have tried few ways to get this value dynamically but I'm missing something.
Sample Table Data
MessageContentType | BodySegment
xx:ADT_A03_26_GLO_DEF | <ns0:ADT_A03_26_GLO_DEF xmlns:ns0="http://microsoft.com/HealthCare/HL7/2X">.....
Current Query - HardCode Script
SELECT
ID,MsgContentType
BODYSEGMENT,
BODYSEGMENT.value('declare namespace xx="http://microsoft.com/HealthCare/HL7/2X"; /xx:ADT_A03_26_GLO_DEF[1]/colxx[1]/colxx[1]','varchar(300)') AS TimeSpan
FROM
s
When i tried the below line of script, I'm getting this error "[color=#FF0000]The argument 1 of the XMLdata type method "value" must be a string literal.[/color]"
Concat MsgContentType Column
BODYSEGMENT.value('declare namespace xx="http://microsoft.com/HealthCare/HL7/2X"; /'+MsgContentType+'[1]/EVN_EventType[1]/EVN_2_RecordedDateTime[1]','varchar(300)') AS TimeSpan
To overcome that error i used sql column but I'm getting this error [color=#FF0000]XQuery [S.bodysegment.value()]: Syntax error near '[', expected a "node test"[/color].
BODYSEGMENT.value('declare namespace xx="http://microsoft.com/HealthCare/HL7/2X"; /[sql:column("MsgContentType")][1]/EVN_EventType[1]/EVN_2_RecordedDateTime[1]','varchar(300)') AS TimeSpan
I tried this line of script, i didn't get any error by timespan is coming as null, I do hope this script not pointing the correct node to traverse the sibling node.
BODYSEGMENT.value('declare namespace xx="http://microsoft.com/HealthCare/HL7/2X"; /*[local-name()=sql:column("MsgContentType")][1]/EVN_EventType[1]/EVN_2_RecordedDateTime[1]','varchar(300)') AS TimeSpan
View 9 Replies
View Related
Aug 14, 2012
I have two tables with the following structure:
Table 1
---------
id | Name
---------
1 | John
2 | Debbie
3 | Kim
4 | Mary
Table 2
---------
id | Name
---------
654 | John
415 | Debbie
68 | Kim
289 | Mary
Table 2 id's values are all messed up and I need to replace them so that they look exactly like in Table one, my guess is that query will have to replace value of "Id" based on the "Name" column, I hope I made myself clear.
View 6 Replies
View Related
Feb 1, 2012
I am task with identifying the source database name, id, and server name for each staging table that I create. I need to add this to a derived column on all staging tables created from merging same tables on different servers together.
When doing a Merge Join, there is no way to identify the source of data so I would like to see if data came from one database more than the other servers or if their are duplicates across servers.
The thing that bugs me about SSIS Data Flow task is there is no way to do an easy Execute SQL Task after I select my ADO.NET Source to get this information because my connection string is dynamic and there is no way of know which data source is being picked up at runtime.
For Example I have Products table on Server 1 and 2:
Server 2 has more Products and would like to join the two together to create a staging table.
I want see the following:
Product ID, Product Name, Qty, Src_DB_ID, Src_DB_Name, Src_Server_Name
1 IPAD 1000 2, MyDB1, Server1
100 ASUS Pad 40 1, YourDB, Server2
get database name and server name in DATA FLOW only (without using a for each in Control Flow)
View 5 Replies
View Related
Sep 21, 2006
Hey,First, sorry if this post appear twice, because, I can not find my postrecently send, trying to post it once again.I'm out of ideas, so, I thought, will search help here again :(I'm trying to prepare a view for ext. app. This is in normal cases veryeasy, but what if the view structure should be dynamic?!Here is my point (I will siplify the examples).I have a table:create table t_data (id bigint identity (1,1) not null,valvarchar(10) not null,data varchar(100) not nullconstraint [PK_t_data] primary key clustered(id) with fillfactor = 90 on [PRIMARY] )goinsert into t_data (val, data) values('1111111111','1234567890abcdefghijklmnoprstuvwxyz 1234567890abcdefghijklmnoprstuvwxyz67890abcdefghij klmnoprstuvwxyz')insert into t_data (val, data) values('2222222222','1234567890abcdefghijklmnoprstuvwxyz 1234567890abcdefghijklmnoprstuvwxyz12345abcdefghij klmnoprstuvwxyz')insert into t_data (val, data) values('3333333333','12345abcdefghijklmnoprstuvwxyz12345 67890abcdefghijklmnoprstuvwxyz1234567890abcdefghij klmnoprstuvwxyz')insert into t_data (val, data) values('4444444444','67890abcdefghijklmnoprstuvwxyz12345 67890abcdefg12345hijklmnoprstuvwxyz67890abcdefghij klmnoprstuvwxyz')insert into t_data (val, data) values('5555555555','1230abcdefghijklmnoprst12345uvwxyz1 234567890abcdefghijklmnoprstuvwxyz67890abcdefghijk lmnoprstuvwxyz')gocreate table t_dataVal (id bigint identity (1,1) not null,valvarchar(10) not null,fill varchar(4) not nullconstraint [PK_t_dataVal] primary key clustered(id) with fillfactor = 90 on [PRIMARY] )goinsert into t_dataVal (val, fill) values ('1111111111','AAAA')insert into t_dataVal (val, fill) values ('2222222222','KKKK')insert into t_dataVal (val, fill) values ('3333333333','DDDD')insert into t_dataVal (val, fill) values ('4444444444','ZZZZ')insert into t_dataVal (val, fill) values ('5555555555','CCCC')gocreate table t_conf (id bigint identity (1,1) not null,start int not null,length int not null,description varchar(20) not null,constraint [PK_t_conf] primary key clustered(id) with fillfactor = 90 on [PRIMARY] )goinsert into t_conf (start, length, description) values (1,10,'value_1')insert into t_conf (start, length, description) values (11,3,'value_2')insert into t_conf (start, length, description) values(55,15,'value_3')insert into t_conf (start, length, description) values (33,2,'value_4')insert into t_conf (start, length, description) values (88,1,'value_5')insert into t_conf (start, length, description) values (56,7,'value_6')goNow here is the issue:table t_conf contain data, which can be modified by user. The user isseting the appropriate values.Now, there should be a view, which returns:- as headers (collumn names) this what is defined in description columnof t_conf (for example: value_1, value_2 ... value_6)- as values, substrings of all data from t_data, cutted with start andlength values for appropriate decription from t_conf.- first two columns of view, should be column val and fill of t_dataValtableSo the effect should be like this:valfillvalue_1value_2value_3value_4value_5value61111111111AAAA1234567890abc....2222222222KKKK1234567890abc....3333333333DDDD12345abcdefgh....4444444444ZZZZ67890abcdefgh....5555555555CCCC1230abcdefghi....of course, for all other value_x should be the appropriate substringsshown.Sounds simple, hm?Well, I'm trying to do this, since yesterday evening, and can not :(In real life, the call of view/function might happend a lot.The table t_data might have around 4000 records, but the data string islonger (around 3000 characters).Application, might acess a udf, which returns table, and I was focusingin that.Was trying, to create local temp table in function, to insert values,using cursor over t_conf.Unfortunately, everything what I get, is just a vertical representationof the data, and I need it horizontal :(The other problem in function is, that I can not use exec() (wll known)so I can not even create a table,dynamicly, using as column names description value from table t_conf,and as size of field length from this table.Sorry, that the description is maybe not exactly for my problem, butthis is because I'm not even sure, which way to use :(any help will be appreciated!Thank You - Matik
View 1 Replies
View Related
Sep 10, 2015
I have a single table that consist of 4 columns. Entity, ParamName, ParamsValue and ParamiValue. This table stores normalized Late Fee related parameters for apartments. The Entity field contains a code that identifies the apartment complex. The ParamName in a textual field that contains the name of the parameter that the other 2 fields define the value for; ParamsValue and ParamiValue. If the Late Fee parameter (as named in ParamName is something numerical then the value for that parameter can be found in ParamiValue else its in ParamsValue.
I don't know if 'Pivot' is the correct term to use for describing what I am trying to do because I've looked at the Pivot examples and I don't see how that will work for this. Using the Table and data as provided below, how would I construct a query so that I get 1 row per Entity in which the columns are the ParamsValue or ParamiValue for the ParamName listed in the column header (for the query)?
Below is the DDL to create the table and populate it.
USE [DBA_UTIL]
CREATE TABLE [dbo].[PARAMEXAMPLE](
[Entity] [varchar](16) NULL,
[Code]....
View 4 Replies
View Related
May 12, 2015
Using MDS 2012: I have an entity "XYZ_Entity". In "XYZ_Entity" entity I have 2 domain based Columns "DealerGroup" and "Dealer".
While inserting information into "XYZ_Entity" entity user can select the required dealer group from domain base Dealer Group values. Now for selecting Dealer he wants the dealers to be filter based on selected dealer group and he can select from the filtered list. reason to do that is he don't want to go through thousands of dealers and select an incorrect one.
Is it possible, if yes then how?
View 2 Replies
View Related
Oct 19, 2015
I'm working on a script to merge multiple columns(30) into a single column separated by a semicolons, but I'm getting the following error below. I tried to convert to the correct value. but I'm still getting an error.
Error: "Conversion failed when converting the varchar value ';' to data type tinyint".
select
t1.Code1TypeId + ';' +
t1.Code2TypeId + ';' +
t1.Code3TypeId + ';' +
t1.Code4TypeId as CodeCombined
from Sampling.dbo.account_test t1
where t1.Code1TypeId = 20
or t1.Code2TypeId = 20
or t1.Code3TypeId = 20
or t1.Code4TypeId = 20
View 4 Replies
View Related
Jul 25, 2006
W2k3 server, SQL 2005.
@@version = Microsoft SQL Server 2005 - 9.00.1399.06 (Intel X86)
Standard Edition on Windows NT 5.2
(Build 3790: Service Pack 1)
I have my first SSIS package almost working, but I'm having an odd problem and can't find any information to help resolve it.
I'm importing from a flat file (csv) to an existing table (append). I've got a Derived Column transformation in the middle to do some data cleanup. It's all working except for one little problem...
One of the transformations is 'REPLACE([Column 3],"^","; ")', output to a new column. (The input file has a field that uses carets as delimiters between an unknown number of items; I'm changing that to semicolons for easier reading.) Not all rows have data in this column, some will have one item, some will have multiple items.
The REPLACE works except that it fills in repeated data for all the blank rows.
Example:
Incoming data is:
1 Smith,Jane^Jones,Jane
2 Brown,John
3
4 Adams,James^Adams,Jim
5
6 White,Debra
Data inserted into the table is:
1 Smith,Jane; Jones,Jane
2 Brown,John
3 Brown,John
4 Adams,James; Adams,Jim
5 Adams,James; Adams,Jim
6 White,Debra
I've tried to use a Conditional to skip the empty rows, but I can't get that working at all (get syntax errors no matter what I put in).
Any suggestions on how to fix this would be most appreciated!
Thank you.
View 5 Replies
View Related
Jan 30, 2015
Deciding whether or not to use a CTE or this simple faster approach utilizing system tables, hijacking them.
SELECT s.ORDER_NUMBER, s.PRODUCT_ID, 1 AS QTY, s.VALUE/s.QTY AS VALUE
FROM @SPLITROW s
INNER JOIN master.dbo.spt_values t ON t.type='P'
AND t.number BETWEEN 1 AND s.QTY
Just wanted to know if its okay to use system tables in a production environment and if there are any pit falls of using them ?
View 1 Replies
View Related
Mar 11, 2015
I've managed to use the pivot function using the code below which gives me the following output:
Location_Code Gt 0-1 Gt 1-2 Gt 2-3 Gt 3-4
North 10 0 3 5
West 6 3 2 0
South 4 2 8 2
This is exactly what I want but I would like an additional final column that will total the columns by location_code and weekband.
[Location_Code] AS 'Location Code'
,[Gt 0-1], [Gt 1-2], [Gt 2-3], [Gt 3-4]
from (select [WeekBand]
,[Location_Code]
, count(*) as CountOf
[Code] ....
View 7 Replies
View Related
May 14, 2008
Hi There,
Could someone please tell me why I am getting the above error on this code:
select (replace
(replace
(replace
(replace (serviceType, 'null', ' ')
, '<values><value>', ' ')
, '</value><value>', ',')
, '</value></values>', ' '))
from credit
serviceType (text,null)
Thanks,
Rhonda
View 1 Replies
View Related
Jun 17, 2015
A common partitioning scenario is when the partition column has the same value for every record in the partition, as opposed to a range of values. Am I the only person who wonders why there isn't an option to automatically partition a table based on the unique values of the partition column? Instead of defining a partition function with constants, you ought to be able to just give it the column and be done. This would be particularly valuable for tables partitioned on a weekly or monthly date; when new data is added it could simply create a new partition if one doesn't already exist.
View 4 Replies
View Related
Jun 7, 2006
I need to periodically import a (HUGE) table of data from an external data source (not SQL Server) into SQL Server, with the following scenarios:
Some of the records in the external data source may not exist in SQL.Some of the records in the external data source may have a different value at different imports, but this records are identified univocally by the same primary key in the external datasource and in SQL Server.Some of the records in the external data source may be the same in SQL.
Due to the massive volume of the import, I would like to import only the records which are different from what I have in SQL Server (cases 1 and 2 above). In fact case 2 is the most critical.
I thought of making a query with a left outer join between the data in the external data source table (SOURCE) and the data in the SQL Server table (DESTIN). The join is done on the respective primary keys (composed keys of up to 10 columns) and one of the WHERE conditions will be that the value in SOURCE is different from the value in DESTIN.
The result of this query would be exactly what I need to import.
How to do this in SSIS??? I couldn't figure out how to join tables in different data sources yet.
In fact I cannot write a stored procedure to do that, since one of the sources is in a datasources not SQL Server.
I have seen the Lookup transformation in this article http://www.sqlis.com/default.aspx?311 but this is not exacltly what I want to do.
Another possibility is to use the merge join, but due to the sorting I believe its performances would be terrible!
Thanks in advance for your suggestions!
View 9 Replies
View Related
Apr 1, 2008
I'm in the middle of developing a Database for a hospital that measures its audits, inhouse operations, and finance. What we currently have and do everyday is collect data from a large database that is real time with patient data, progess, infomation, etc and dump it into a data warehouse that runs on TSI/Eclipsys. We run reports using a number of programs and dump it into Excel sheets that have charts, reports, etc. This Database for which I'm developing won't come soley from the TSI/Eclypsys source, but this is the only source thats updated regularly. I don't want to have in sync with TSI/Eclipysys in fear that every day when it updates data may be lost, not read, or worse won't be up date if there is a problem. My question is is it possible to run a query from Sequel Server 2005 that will take that data upon request using the reporing features on Sequel Server 2005. i.e. What if I need to run a report on measure B in department 12 from Jan 1-Feb 1, instead of being in sync, can I just write queries to take that information rather than double the data and take up twice the space and trouble. FYI, these datatypes rarely change in the TSI/Eclipsys data warehouse. This sure was long question and didn't intended it to be . Thanks for listening and hope to hear back.
Stephen
View 1 Replies
View Related
Oct 24, 2007
Hi everybody!
My users need to sort data on base of columns that they select ,the same as sorting in grid but i need it with reporting services.
Thankas in advance.
View 3 Replies
View Related
Mar 22, 2007
Hello All.
Hopefully someone out there will have an idea as this isdriving me nuts.
Ihave some sample problem. I want to use function replace() on Derived Column.
For example.
when strDate = 2007/03/22
I used ==> replace(strDate, "/", "") ==> 20060322
But If strTest = "123.10" ====>> 123.10
How can i do to replace ( " )double qoute ?
by function replace()
what is a statement for replace (") in Derived Column ?
please tell me for this event.
any suggesstion appreciated
Thank you very much.
Chonnathan
View 11 Replies
View Related
Apr 9, 2008
ID
TestID
IsCorrect
294817
1
1
294817
1
0
294817
1
1
294817
1
0
301391
2
1
301391
2
1
301391
2
1
301391
2
0
304409
1
1
304409
1
0
304409
1
0
304409
1
0
I am trying to get the percent correct for each ID and each testID from the table above. Also, IsCorrect column valuse (1= correct; 0= not correct)
select ID, count(Iscorrect) [total], (select count(Iscorrect) from dbo.StudentTestAnswers
where TestID=1 and Iscorrect=1) as totalCorrect,((select count(Iscorrect) from dbo.StudentTestAnswers
where TestID=1 and Iscorrect=1)/count(Iscorrect)*100) as PctCorrect
from StudentTestAnswers
where testID=1
Group by ID, TestID
The output should look like this after running the T-SQL code above. But I am getting some weird number on totalCorrect and PctCorrect columns. Not sure if my SQL code is even correct.
ID
total
totalCorrect
PctCorrect
294817
4
2
50%
301391
4
3
75%
304409
4
1
25%
View 7 Replies
View Related
Aug 30, 2007
Hi
I am having a problem in auditing the column data in tables.My requirement is i have write a trigger which is capable of auditing the columns which are going to be added in the future also with out using dynamic SQL.is there any way to do so.
I feel if i can get the column data based on ordinal position then it is possible.
Can any body suggest.
My set Up is like this
I have a base_table to be audited.
I have a Audit_spec table which contains name of the table and columns to be audited.
And Audit table which actually captures the table name,column name ,old value and new value.
I have to audit only those columns in the Audit_spec spec.
If schema changes(Like new column added) happens to base_table and I want that column to be audited.with out any changes to my trigger code i should handle the newly added column ..
View 6 Replies
View Related
Jul 20, 2005
Hi,Suppose I have a table containing monthly sales figures from my shopbranches:Branch Month Sales-----------------------London Jan 5000London Feb 4500London Mar 5200Cardiff Jan 2900Cardiff Feb 4100Cardiff Mar 3500The question I am trying to ask is this: in which month did each branchachieve its highest sales? So I want a result set something like this:Branch Month----------------London MarCardiff FebI can do a "SELECT Branch, MAX(Sales) FROM MonthlySales GROUP BY Branch" totell me what the highest monthly sales figure was, but I just can't figureout how to write a query to tell me which month corresponded to MAX(Sales).Ideas anyone?Cheers,....Andy
View 5 Replies
View Related
Jun 4, 2014
I am trying to pivot data based on columns value in year column... but results are not showing up correctly. I want to see all columns after pivot.I want to Pivot based on year shown in the data but it can be dynamic as year can go for last 3 years
I am also using an inner join as i have two amount columns in my code and i want to show both amount columns for all displayed year.I am able to pivot but I need in output all the columns like this Id,MainDate, Year1,Year2,Year3(if any), AMT1 for YR1, AMT2 for Yr1, , AMT1 for YR2, AMT2 for Yr2, AMT1 for YR3, AMT2 for Yr3,
Here is some data:
-- CREATE TABLE [dbo].[TEMP](
--[FileType] [varchar](19) NOT NULL,
--[dType] [char](2) NOT NULL,
--[dVersion] [char](2) NOT NULL,
--[Id] [char](25) NOT NULL,
--[MainDate] [char](40) NULL,
[code]....
View 5 Replies
View Related
May 19, 2015
DELETE FROM Report_temp2
WHERE MSSalesID in
( Select Report_temp.MSSalesID FROM Report_temp)
DELETE FROM Report_temp
WHEREMSDate < '2015-07-01'
Actually the year stating form july.
Q1 is july,aug,sep.
Q2 is oct nov,dec.
Q3 is jan,feb,mar.
Q4 is april, may,june.
So what I need is dynamically I want to delete the data every year prior to current year.
View 4 Replies
View Related
Aug 1, 2006
Hi all--I've got a derived column transformation where I am adding a field called Import_Date. I'm telling it to add as a new column and use the function "GetDate()" to populate the field. When I run the package, it returns NULL as the data value for all rows. Any idea why this might be happening?
View 5 Replies
View Related
Nov 30, 2007
I have a results table that was created from many different sources in SSIS. I have done calculations and created derived columns in it. I am trying to figure out if there is a way to remove duplicate rows from this table without first writing it to a temp sql table and then parsing through it to remove them.
each row has a like key in a column - I would like to remove like rows keeping specific columns in the resulting row based on the data in this key field.
Ideas?
Thanks,
Ad.
View 7 Replies
View Related
Oct 15, 2015
Is it possible to include a currency symbol in an amount-field in PowerPivot/Pivottable based on a Currency column in a table? Something as the same as with SSAS MD. And I don't want fixed values in my code.
View 3 Replies
View Related
Nov 30, 2007
I need to create a function that will check data inputted by a user into a column anc check for special charaters. If any of these exist then block the insert.
Any help will be appreciated!
Paul
View 10 Replies
View Related
Feb 26, 2015
I am writing a query to return some production data. Basically i need to insert either 1 or 2 rows into a Table variable based on a decision as to does the production part make 1 or 2 items ( The Raw data does not allow for this it comes from a look up in my database)
I can retrieve all the source data i need easily but when i come to insert it into the table variable i need to insert 1 record if its a single part or 2 records if its a twin part. I know could use a cursor but im sure there has to be an easier way !
Below is the code i have at the moment
declare @startdate as datetime
declare @enddate as datetime
declare @Line as Integer
DECLARE @count INT
set @startdate = '2015-01-01'
set @enddate = '2015-01-31'
[Code] .....
View 1 Replies
View Related
Dec 12, 2014
I have data like this in a table
ID test_date Score
001 4/1/2014 80
001 5/4/2014 85
001 6/1/2014 82
I want to convert the data into a row like this:
ID test_date1 score1 test_date2 score2 test_date3 Score3
001 4/1/2014 80 5/4/2014 85 6/1/2014 82
How can I do that with T-SQL?
View 1 Replies
View Related
May 7, 2015
I would like to replace the value in the Select query of CO OWNER with a space ' ' or NULL if the ORDINAL value = 0.
The CO OWNER name is stored in the CARDNAME table, and the OWNER name is stored in the NAME table. I can not change the db structure.
JEAN is the ACCOUNT owner and BILL is CO OWNER of two cards.
Current Select Results:
ACCOUNT CARD ORDINAL CO OWNER OWNER
200500 9999999999999100 2 BILL JEAN
200500 9999999999999101 1 BILL JEAN
200500 9999999999999102 0 BILL JEAN
Desired Select Results:
ACCOUNT CARD ORDINAL CO OWNER OWNER
200500 9999999999999100 2 BILL JEAN
200500 9999999999999101 1 BILL JEAN
200500 9999999999999102 0 NULL JEAN
Current SQL Select statement:
SELECT DISTINCT
CARD.PARENTACCOUNT AS ACCOUNT,
CARD.NUMBER AS CARD,
CARD.ORDINAL,
CARD.STATUS,
CARDNAME.FIRST AS CO_OWNER,
[code]....
View 9 Replies
View Related
