I am trying to generate dates for a roster dynamically in a stored procedure. If my start date is '01/01/2015', end date is '12/31/2015', I should generate dates from '01/01/2015' adding 7 days.
The output comes like this:
01/01/2015
01/08/2015
01/15/2015
.
.
.
until end date
I do it through loop but just posting it here to know, if there is any other efficient way using CTEs or some sort of queries which can avoid loop in SP.
Hello all. I need to build a barcode and stuff it in a image control at runtime in SRS. I have the code at it works perfect for webforms etc but not in the actual SRS report itself. In SRS I put the code in the report properties code but it blows up on bitmap, graphics etc so I added the system.drawing and system.drawing.imaging namespace and it still fails with the same error. I'm certain there is a simple fix for this and would greatly appreciate anyones assistance in making this happen.
Error:
There is an error on line 15 of custom code: [BC30002] Type 'Bitmap' is not defined.
Dim ValidCodes As String = "17401644163811761164110012241220112416081604157214361244123014841260125416501628161417641652190218681836183018921844184217521734159013041112109414161128112216721576157014641422113414961478114219101678158217681762177418801862181418961890181819141602193013281292120011581068106214241412123212181076107415541616197815561146134012121182150812681266195619401938175817821974140013101118151215061960195415021518188619661724168016926379"
Dim Digit As Integer = 104
Dim i As Integer
For i = 1 To input.Length
Digit += (i * InStr(1, ValidInput, Mid(input, i, 1)))
I want to generate a resultset that is just a series of numbers inascending order or perhaps a series of dates.. What I mean is, isthere a way to generate a temporary table of dates given an input of astart date and an end date.. This table would then contain an entryfor each date in ascending order from the start date to and includingthe end date..Or perhaps with numbers, given a start of 5 and and end of 7the resulting table would be567Would appreciate any help with this one.. ThanksChris
This may be a very easy question to answer, but I cannot figure out the answer for the life of me. I have set up a simple SSIS project based on a template that gathers information from several servers. I would like for this package to be almost completely automated and run nightly. Is there a setting I can add to make it run everyday?
How to show the dates in between a range. Its hard for me to explain so I have ddl with the original results and then ddl of how I would like the desired outcome.
On the side I have a visit ID I need to show each day logged for each ID. Sometime the Start and End are a single day and sometimes they are a range. I need a row for each date.
tblCustomers contains a CustomerID that is unique to each customer.
tblMachines contains a list of all machines with a MachineID that is unique to each machine. It also contains the CustomerID number.
tblServiceOrders contains a list of each time each customer was serviced. It contains the ServiceDate, CustomerID, and ServiceOrderNo. But it does not have any information on the machines.
tblMachinesServiced contains a list of each machine that was serviced for each service order. It contains the ServiceOrderNo and the MachineID number.
What I want is to be able to extract a list of machines that were not serviced between 2 dates. What I end up getting is a list of machines that were serviced outside of the date range I provide.
For instance, say machine A was serviced in 2013 and 2015 but not in 2014. And say machine B was serviced in all 3 years. When I try to extract my list of machines not serviced in 2014 I end up with a list that contains machine A-2013, A-2015, B-2013 & B-2015. But what I need is just machine A-2014, since that machine wasn’t serviced in 2014.
I’ve tried several different queries but here is an example:
SELECT tblMachines.MachineID,ServiceMachines.ServiceDate FROM tblMachines LEFT JOIN (SELECT MachineID, ServiceDate FROM tblServiceOrders, tblMachinesServiced WHERE tblServiceOrders.ServiceOrderNo=tblMachinesServiced.ServiceOrderNo ) ServicedMachines ON tblMachines.MachineID=ServicedMachines.MachineID WHERE YEAR(ServiceDate) != '2014'
I understand why it returns the records that it does, but I'm not sure how to get what I want, which is a list of machines not serviced in 2014.
I have a list of patient encounter dates ordered by the date. I need to subtract the previous date in order to get the number of days between each date for the same patient.
create table TEST ( MRN varchar(10), EncDTTM datetime, Sequence int ) insert into TEST(MRN, EncDTTM, Sequence) values( '00000203','2014-01-24','1') insert into TEST(MRN, EncDTTM, Sequence) values( '00000203','2014-02-03','2')
I am importing a couple SAS datasets to SQL Server 2008 for a project. The dates are in a float format, they show up as DT_R8 in SSIS. How can I convert these values to SQL server datetime? I have tried dozens of methods I found on-line with no success, I keep getting 'Arithmetic overflow error converting expression to data type datetime.' errors.
SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO SET ANSI_PADDING ON GO CREATE TABLE [dbo].[PaymentsLog](
[Code] ....
Is there a way to look at the DatePeriod table and use the StartDtae and EndDate as the periods to be used in the select statement and then cursor through each date between these two dates and then insert the data in to the PaymentsLog table?
I have a challenge and I'm not sure the best route to go. Consider the following dataset.
I have a table of sales. The table has fields for customer number and date of sale. There are 1 - n records for a customer. What I want is a record per customer that has the customer number and the average number of months between purchases. For example, Customer 12345 has made 5 purchases.
I made one report in SSRS 2008 in which getting data from one SharePoint List.
three parameters in report :
Country StartDate EndDate
I am using query which I created with CAML.
query is running well and data is coming correctly if I run this on Query designer.and date format must be YYYY-MM-DD.but when I try to run through on run time then the date control is showing format dd/mm/yyyy.
I change the regional settings of windows and SharePoint site to English(United States). and when I select date control it is also putting date in format like "YYYY-MM-DD'. and in that format report is working well in Query designer view.But on run time still it is not working.
I am having a Data flow task in For each loop which will gets 100 sourcetable names and 100 target table names...
am having a simpleData flow task which trasferes from OLEDBSource to OLEDBDestination. I am repeating the Dataflow task which transfers from sourcetablename extracted from for loop to a destination table var.
The problem am gettting is for the first table it is able to transfer correcly because I did mapping for those tables at design time...but for the next coming sourcetable-desttable (which r having different no of cols,datatypes) its giving Validation failed...and...needs to refresh metadata....
is there any way to refresh the metadata of Data flow task (I set the property of OLEDBSource validate external meta to false then also same error is coming)
There are a few features in the new SQL Server - Reporting Services that I really need in production. I have tested everything and it works great. I am running the CTP version since Microsoft is saying they aren't releasing the release version until 3rd quarter 2008.
Since Microsoft won't sell SQL 2008 until 3rd quarter, can I run the CTP in production until the release and then purchase SQL 2008?
My boss claims that there is a free SQL server runtime. Is thistrue? I was only aware of MSDE. But I believe the connections arecapped at 5 in MSDE. If there is a free SQL server runtime, are thereany limitations to using it (performance, connection count)? Thanks.
Hello - does anyone have experience w/SQL Server 2005 in a virtual environment? I'm considering this for a production environment but not sure if performance will suffer. Our databases will have a lot of writing but not too much reading. A SSRS solution is currently the only app. connecting to the SQL db. Max users to server at any given time will be very low (~10 users max). But the databases are pulling in data from other, outside multiple data sources on a daily basis.
Hello! Recently, I set up server with Windows Web Server 2008 RC1, SQL 2008 Express beta, .NET 3.5, IIS 7. I'm running ASP.NET web application with SQL database. Everything works fine until the first application state on the server expires. After that, any postback that starts a new application state on the server and connects to the database, results in the following error: Failed to generate a user instance of SQL Server due to a failure in starting the process for the user instance. The connection will be closed. Is this a bug that will be fixed in release of Windows / SQL or am I doing something wrong? Many thanks for help, Jan
Hi every one I want to generate a RSS Feed from SQL Server 2005. The scenario is that when a record is entered in the database, the database fire a trigger which generate rss feed for the new record entered in the data base Thanx in advance Take care Bye
we have data base in ms access and reports in crystal reports 5 recently we converted our data base to sql sever 7 and reports to crystal reports 8. when i opend directly in cystal reports and given data base connecting through oledb i am getting reports but from the application it is in vb6 the report window is poping up and latter a error msg saying un able to open sql server when i checked up the connection it is ok help me anil
I am trying to generate a hex value automatically at time of insert. The column used for the hex # is an identity column. I am getting an error that the trigger fails because the field doesn't accept nulls. My guess is that the identity column is not populated yet.
Below is the table and trigger.
CREATE TABLE [dbo].[scancode]( [scancode_id] [int] IDENTITY(1,1) NOT NULL, [scancode] [varchar](50) NOT NULL, [parent_object] [varchar](150) NOT NULL, [parent_object_id] [int] NOT NULL, [Created] [datetime] NOT NULL,
we can generate drop-down list on the tables by writing sql query at "Access". I was wondering whether or not the same thing can be done for SQL Server?
I use SQL Server 2005 Dev Edition and am not new to making databases (then again, I've had enough experience and my dad does the same thing).
I am (unfortunately) a university student and for my dissertation I am going to produce a SQL Server database with a strong emphasis on data mining.
Obviously, for the data mining to be useful at all I need to produce loads and loads of test data.
Fair enough, and there are applications which do this, such as EMS Data Gen, but can anyone recommend me any other data gen utilities? EMS Data Gen has poor handling of unique attributes, and as I am doing a car manufacturer this will give me problems when I come to the registration number attribute.
Also, why are utilities for SQL Server (and Oracle at that) so expensive? This makes it out of my reach and makes it difficult to build a truly good database that will net me good marks, and demotivates me. :(
Lastly, please feel free to recommend to me any utilities for SQL Server - such as performance monitors, backup utilities. Anything. But if they are priced utilities, they have to be sensibly priced (<£100), because I cannot yet afford to pay >£1k on such utiltiies.
