SQL Server 2008 :: How To Bring Write Log Wait Type Count Down
Oct 29, 2015
This is the scenario in my environment
WaitType Wait_Sec Resource_Sec Signal_Sec Wait Count Wait Percentage
WRITELOG920039.89887485.89 32554.00 23446032975.02
View 9 Replies
ADVERTISEMENT
Mar 2, 2008
hi.
I have a question. I work in BI (with sql server 2000) and this year (2008) my idea is migrate to 2005, but, consulting to expert in Microsoft technology, they suggested wait to 2008, sql 2005 have many problem, sql server 2008 was completed re-write.
The question is, what problem have sql server 2005?
TIA.
Abel.
View 2 Replies
View Related
Sep 13, 2007
I am trying to do a calculation with the below query and it works long as d.closegoal has values and d1.opengoal has values but the problem is when there is no count for either, I need to bring back a value of zero if there are no matches. Since I am using it in an outer select statement for a calculation it not bringing anything back because of no matches.
This is my code:
select d.lwia,
cast((d.closegoal + d1.opengoal) as float)denominator
from
(
select yg.lwia,
cast(count(yg.appid)as float) closegoal
from dbo.wiayouthgoals yg
where yg.lwia = @RWB
-- Attained a goal in the timeframe timely or untimely
and ((convert(smalldatetime, convert(varchar(10),yg.youthattaindate, 101)) >= @BeginDte -- Parm date for beginning of time frame needed
and convert(smalldatetime, convert(varchar(10),yg.youthattaindate, 101)) <= @EndDte) -- Parm date for end of time frame needed
-- Goal due but not attained
or (convert(smalldatetime, convert(varchar(10),yg.youthgoalanniversary, 101)) >= @BeginDte -- Parm date for beginning of time frame needed
and convert(smalldatetime, convert(varchar(10),yg.youthgoalanniversary, 101)) <= @EndDte -- Parm date for end of time frame needed
and yg.youthattaingoal <> 1))
group by yg.lwia
)d,
(
-- Closure with open goal
select cast(count(yg.appid)as float) opengoal
from dbo.tbl_caseclosure cc,
dbo.wiayouthgoals yg
where yg.appid = cc.col_idnum
and convert(smalldatetime, convert(varchar(10),cc.col_closuredate, 101)) >= @BeginDte -- Parm date for beginning of time frame needed
and convert(smalldatetime, convert(varchar(10),cc.col_closuredate, 101)) <= @EndDte -- Parm date for end of time frame needed
and yg.youthattaindate is null
and yg.lwia = @RWB
group by yg.lwia
)d1
)d2
View 3 Replies
View Related
Apr 15, 2014
I am currently investigating aa high avg write time ms issue (145ms) which seems to be only occuring on the tempdb data files.I have followed the recommended setup of TEMPDB in that
1. Data files = number of physical cores
2. Data files and logfiles are on separate partitions away from the other databases.
3. Tempdb is presized and no incremental file increases look like they are happening with frequency.
We have sharepoint 2012 setup on other sql servers and with TEMPDB setup following the same guidelines, with far more Sharepoint activity on a similary specified hardware which is why its confusing.FileIO auditing on the partitions themselves shows that the FileIO is very fast on the partitions that the tempdb data file which leads me to beleive that Sharepoint may be the culprit perhaps due to excess use of tempdb with operations taking a long time to resolve.
View 3 Replies
View Related
Jan 14, 2005
I have an ASP.NET web application that hangs on a single database UPDATE command for 5+ minutes. I can see this occur in SQL Profiler. This is a one row UPDATE statement on a small table (~600 rows). There are no JOINs or sub queries. There are no other users using the system. During this 5+ minutes, I can see the job in Enterprise Manager with a wait type of NETWORKIO. Since both IIS And SQL Server are running on the same system, the network shouldn't be an issue. Any ideas?
View 5 Replies
View Related
Sep 29, 2006
Hello, my first post??
View 4 Replies
View Related
Mar 28, 2007
Recently we observed a problem. We are running stored procedure through our c# code. Three machines access the server and update or insert in the required tables in the server. If there is no data in the server, on installing first time our application usually our database is clean. then stored procedure works fine, it takes around 10 to 15 sec to execute. Next time if execute the time goes up to minutes like 15 mins. Next time it goes for hours around 4 hrs. Even to update 4 or 5 records it takes time. Initially we thought it was because of the size of the data and we tried to re tune on indexes, it did not solve. But now what we observe is even with less number of records in server also it wouldn't come of the execution for hours.
Now are executing the just the SP in the SQL manager studio to see the time. That one also is executing for hours. when looked at the activity monitor the process goes to suspend state with wait type ASYNC_NETWORK_IO.
When we comment one of the query is working fine.
Is this something to do with the query I am not sure. If that is the case it should not work every time.
The query makes any sence or is there any way to write it in better way
'UPDATE [server].[dbo].[DocumentMetadata] SET DocumentInfoID = b.DocumentInfoID, [Name] = b.[Name], MetadataType = b.MetadataType,
[Value] = b.[Value], ValueType = b.ValueType
FROM [server].[dbo].[DocumentMetadata] a WITH (UPDLOCK)
INNER JOIN (SELECT c.DocumentInfoID, c.[Name], c.MetadataType, c.[Value], c.ValueType
FROM MACHINENAME.[Client].[dbo].[DocumentMetadata] c
INNER JOIN MACHINENAME.[Client].dbo.DocumentInfo DINF ON c.DocumentInfoID = DINF.DocumentInfoID
INNER JOIN MACHINENAME.[Client].dbo.Path d on DINF.NativeFileID = d.PathID
INNER JOIN MACHINENAME.[Client].dbo.ActiveDataSource ADS ON d.DataSourceID = ADS.DataSourceID
WHERE ADS.ProjectID = ''' + @ProjID + ''') b
ON a.DocumentInfoID = b.DocumentInfoID AND a.[Name] = b.[Name]'
'INSERT INTO [server].[dbo].[DocumentMetadata]
(DocumentInfoID, [Name], MetadataType, [Value], ValueType)
SELECT c.DocumentInfoID, c.[Name], c.MetadataType, c.[Value], c.ValueType
FROM MACHINENAME.[Client].[dbo].[DocumentMetadata] c
INNER JOIN MACHINENAME.[Client].dbo.DocumentInfo DINF ON c.DocumentInfoID = DINF.DocumentInfoID
INNER JOIN MACHINENAME.[Client].dbo.Path d on DINF.NativeFileID = d.PathID
INNER JOIN MYCLI.[Client].dbo.ActiveDataSource ADS ON d.DataSourceID = ADS.DataSourceID
WHERE ADS.ProjectID = ''' + @ProjID + '''
AND Ltrim(rtrim(c.DocumentInfoID))+ ltrim(rtrim(c.[Name])) NOT IN
(SELECT Ltrim(rtrim(DocumentInfoID))+ ltrim(rtrim([Name])) FROM [server].[dbo].[DocumentMetadata])'
We have been fighting it out for so many days.
Can anybody help
Thanks
knvdssr
View 5 Replies
View Related
Nov 3, 2007
Hello, I have worked with SQL Server 2000 but now we have a requirement where I need to write values from an asp.net form into an XML type in SQL Server 2005.
I have never used XML as a type in SQL Server 2005. How do we write xml into xml type.
For example the structure of XML is something like:
<application>
<applicationID = "value"></applicationID>
<customerName="value></customerName>
</application>
I have to write this kind of XML into the XML type and later retrieve these XML values and populate the form again.
Kindly suggest. Thanks a lot.
View 1 Replies
View Related
Sep 4, 2015
During our DR drill we found that the same code which used to run perfectly fine on our Primary Data Centre is running very slow on Disaster Recovery DB Server and there are Lot's of open transaction with sleeping status and waittype as 'AWAITING COMMAND'.CPU, Memory and disk utilization are good. The ping reply between the app server and the DB server is well within the limit's even blocking is not their, also nothing is reported in the error logs. We are using SQL server 2014 STD 64 BIT on Windows Server 2012.
View 6 Replies
View Related
Feb 26, 2015
How would I find the last read/write dates for all the tables within a database.
View 6 Replies
View Related
May 25, 2015
I have a below query which have a date filter like "EST_PICK_DATE between '2015-02-01' and '2015-06-01'", where the logic is EST_PICK_DATE should be 3 months from the current month and 1st date of next month. Ex for current month MAY, EST_PICK_DATE shoulc be between '2015-02-01' and '2015-06-01'. I need to write below query dynamically. In below query i have hardcoded the value ("EST_PICK_DATE between '2015-02-01' and '2015-06-01'"), but it should take dynamically. How to achieve this?
I am using this query in SSIS package, So Shall i do in SQL level or we should implement this logic in package? If yes, How?
INSERT INTO STG_Open_Orders (Div_Code, net_price, gross_price) SELECT ord.DIV_CODE AS Div_Code, ord_l.NET_PRICE AS net_price, ord_l.gross_price AS gross_price, FROM ORD ord inner join ORD_L ord_l ONord.ORD_ID=ord_l.ORD_ID WHERE ord_l.EST_PICK_DATE BETWEEN '2015-02-01' AND'2015-06-01'
View 1 Replies
View Related
Feb 23, 2015
I have the linked server connection created and works perfectly well. I mean I am able to see the tables while I am on my database.
how do I write a SQL statement to reference the linked server ?
I tried the following:
Select top 100 * from casmpogdbspr1.MPOG_Collations.dbo.AsaClass_Cleaned
Then I get the error message....
Msg 7314, Level 16, State 1, Line 1
The OLE DB provider "SQLNCLI10" for linked server "casmpogdbspr1" does not contain the table ""MPOG_Collations"."dbo"."AsaClass_Cleaned"". The table either does not exist or the current user does not have permissions on that table.
View 2 Replies
View Related
Oct 21, 2015
I have been trying to write a cursor to fetch required data from table but somehow its running forever and inserting duplicate records.
I have a temp table named getInvoice where I have five important columns
1. invoice number
2.group
3.invoice status
4. Invoice Expiration date
5. Creation date time
and some other columns.One invoice number can belong to one or more group and there can be one or more records for a particular invoice number and group.
An example is below :
InvoiceNumber Group InvoiceStatus InvoiceExpirationDate CreationDateTime
579312 01 3 NULL 2003-03-24 00:00:00
579312 01 2 2015-12-14 00:00:00 2005-12-24 00:00:00
579312 02 2 2003-12-21 00:00:00 2005-10-12 00:00:00
321244 01 2 2015-12-21 00:00:00 2005-10-12 00:00:00
321244 01 3 2010-12-21 00:00:00 2010-12-21 00:00:00
My query condition is complex and that is why Im facing problem retrieving the output.I need a cursor for getting distinct invoice number from the table and for each invoice number I need to get the latest record for each invoice number and suffix combination based on creationdateand time column and if that record has invoice status of 2 and also the invoice expiration date can be either null or greater than today's date, then I need to get that record and put it in a temp table.
The query I wrote is below
declare myData cursor for
select distinct invoiceNumber from #getInvoice
declare @invoiceNumber varchar(30)
open myData
fetch next from myData into @invoiceNumber
while @@FETCH_STATUS = 0
[Code] .....
This query runs forever and doesn't stop.
View 6 Replies
View Related
Aug 2, 2006
this data. need help
Sort following numbers by asc and desc order
Before query sort
-1.1
-8.8
-15.5
0.0
+0.5
+0.2
Sort asc
+0.5
+0.2
0.0
-1.1
-8.8
Sort Desc
-8.8
-1.1
0.0
+0.2
+0.5
View 5 Replies
View Related
Apr 7, 2015
How can I create a SQL authentication account with read-write access to only 1 table in a SQL database.
View 1 Replies
View Related
Oct 15, 2015
I have few queries.
1. Is there any way to get the Table Row Count if we are not maintaining the count.
2. This is for Update statistics
a. Should we run update statistics in our database for all the tables? The database is highly transactional.
b. How should i calculate the sample size that will suite for all the tables.
There are some tables which gets reindex, this we will ignore. We have a job, which reorganise some tables. Now the decision need to be taken what table should we update statistics to:
1. The table which has been reorganised
2. Table which has its statistics outdated.
View 2 Replies
View Related
Sep 9, 2015
I created a report where collected payments are listed by each collector from month to date.Everything Looks ok on the reporting side until a requirement came up where I am Also supposed to list the total number of payments collected by each collector (the count) and also the (total sum). If you look at the attached excel you would see two tables, I am getting the first table, 2nd is the one I want expected). How do I perform sum and count operations?
ALTER PROC USP_PaymentsByCollector
(
@CollectorName AS varchar(20) = NULL,
@CollectorCode AS varchar(20) = NULL,
@LoanID AS varchar (20) = NULL
--@StartDate AS DATETIME = NULL,
----@EndDate AS DATETIME = NULL
[code]....
View 3 Replies
View Related
Jul 28, 2015
I created a thread 2 days back on a performance problem RE non-trusted check constraints and foreign key constraints. We are planning to make them trusted to see if it works. On the other hand, we see about 50+ clustered/non-clustered indexes with >90% fragmentation but the page counts for all these indexes are in the range between 500-900. I'm reading in the whitepaper that index fragmentation with less than 1000 pages is not a concern.
View 7 Replies
View Related
Feb 1, 2015
i need result from '(1000/3)+(15/100)'. try exec() by failed.
View 5 Replies
View Related
Feb 23, 2015
Below is a SQL statement that shows what columns belong to a certain view. My next question is how can I get a third column that shows the column type ?
VARCHAR(100), or UNIQUEIDENTIFIER or INTEGER or TEXT or NVARCHAR(256) or ........????
select top 100 a.name, b.name, from sys.views a inner join sys.columns b
on a.object_id = b.object_id where a.name like '%Case_Times%'
View 4 Replies
View Related
Feb 27, 2015
In my database there is a big table and format is something like this:
CREATE TABLE [dbo].[MyTable](
[aaa] [uniqueidentifier] NULL,
[bbb] [uniqueidentifier] NULL,
[ccc] [nvarchar](max) NULL,
[ddd] [nvarchar](100) NULL,.......etc.........
There are some more columns with more 'nvarchar' (max) and other INT data types. Anyway, I know a page is 8K size. How do I find out how much space does A ROW takes with above datatypes? If users add 5000 Rows per day, how do I figure out how much size the table will increase?
View 9 Replies
View Related
Feb 5, 2015
I'm trying to store the output of my stored procedure into a temp table, which takes Table Type as Input.
CREATE TYPE [dbo].[Employee] AS TABLE(
[Field] [varchar](50) NULL,
[Criteria] [varchar](50) NULL,
[Value] [varchar](50) NULL
)
declare @Employee dbo.Employee
insert into @Employee values(N'Salary',N'is greater than',N'3520')
DECLARE @sql NVARCHAR(MAX)
SET @sql = 'SELECT * FROM OPENROWSET(''SQLNCLI'',''Server=localhost;Trusted_Connection=yes;'',''EXEC dbo.uspGetEmployee ' + @Employee + ')'
I need to create a stored procedure which uses output of the above stored procedure. Hence, I don't want to put declare and insert into OPENROWSET as I get those values as parameter to the new procedure.
Any other solution instead of using OpenRowSet.
View 5 Replies
View Related
Jul 3, 2015
I have 3 tables as per following:
orddet
OrderProductQtyOrd
1 Item1 20
2 Item1 10
3 Item2 10
4 Item1 5
4 Item2 5
ordhead
OrderDate
110/06/2015
205/07/2015
307/06/2015
415/08/2015
product
ProductdescMinQty
Item1This is 110
Item2This is 220
I want to pull only the 1 line for minqty for an item as follows
OrderProductQtyOrddate minqty
1 Item1 20 10/06/2015 10
2 Item1 10 05/07/2015
3 Item2 10 07/06/2015 20
4 Item1 5 15/08/2015
4 Item2 5 15/08/2015
View 2 Replies
View Related
Jul 24, 2015
Is there a good way to add columns to a table type?
I built several procs which make use of table-valued-parameters, and they work pretty nicely, until I need them to accept additional columns. Then I have to drop all the procs that use them, alter the types, and rebuild all the procedures, which is a huge pain in the rear.
Is there any good way (built in, or custom) to alter the def of a table type that's used as a parameter to multiple stored procedures?
View 9 Replies
View Related
Aug 10, 2015
I'm using the SQL below to work out recruitment figures. The query works well, but I now need to build this query into a DotNet application as a webpage. I therefore need to declare and manipulate the values such as 'Total', 'Jan' to 'Dec' and 'YearRecruited' in order to write these values into my chosen data control. I therefore need to know the datatypes of these calculated values.
Total I think is straightforward as DNAScreeningID is an int datatype. But what about the others?
SELECT YEAR(SamplingDate) AS YearRecruited,
COUNT(CASE WHEN month(SamplingDate) = 1 THEN DNAScreeningID END) AS 'Jan',
COUNT(CASE WHEN month(SamplingDate) = 2 THEN DNAScreeningID END) AS 'Feb',
COUNT(CASE WHEN month(SamplingDate) = 3 THEN DNAScreeningID END) AS 'Mar',
COUNT(CASE WHEN month(SamplingDate) = 4 THEN DNAScreeningID END) AS 'Apr',
[Code] ....
View 5 Replies
View Related
Oct 7, 2015
I've never worked with the XML data type in SQL Server, although I know its been there for a few iterations of SQL SErver. Now I've got a situation in which it might store some configuration data as XML, since that's the way it comes. (We had thought about storing the data in a VARCHAR(MAX) field.)
The first question is does the XML data type have a size limitation? For example do you do something like:
ConfigFile XML(1000) NULL
Or is it just something like this:
ConfigFile XML NULL
The second question is persisting the data to a file. As the name I choose for the variable suggests, we want to save the data from a configuration file into a SQL Server database. How do we go about doing that? We'll be developing a C# application, it will read and write the data both from the SQL table and the user's local HD.
View 5 Replies
View Related
Oct 15, 2015
Should data type money allow nulls? Are there valid arguments both pro and con?
Yes, there is the age-old question regarding how one might interpret a NULL found in any column - does it mean the amount is not known or that the amount is zero (in the case of a numeric type)? You get the drift...
Other than that, though - are there any practical considerations an old data hound ought to be aware of?
View 7 Replies
View Related
Apr 23, 2015
SET NOCOUNT ON
Declare @daysOld int,@deletedate nvarchar(19) ,@strDir varchar(250)
declare @cmd11 nvarchar(2000)
declare @mainBackupDir varchar(2000),
@result1 nvarchar(max);
[Code] ....
View 1 Replies
View Related
May 27, 2015
My data has 2 fields: Customer Telephone Number, Date of Visit.
Basically I want to add a field ([# of Visits]), which tells me what number of visit the current record is within 6 months.
Customer TN | Date of Visit | # of Visits (Within 6 month - 180 days)
1111 | 01-Jan-2015 | 1
1111 | 06-Jan-2015 | 2
1111 | 30-Jan-2015 | 3
1111 | 05-Apr-2015 | 4
1111 | 07-Jul-2015 | 3
As you can see, the last visit would counts as 3rd because 180 days from 07-Jul-2015 would be Jan-8-2015.
View 3 Replies
View Related
Oct 7, 2015
Naming convention and what am I doing wrong here:
,(Select Count(C2.AppID) From Channels c left join Applications a on c.ChannelID = a.SourceID left join Contracts2 c2 on a.AppID = c2.AppID Where Channels.ChannelID = c.ChannelID and c2.DateContractFunded > (Select dateadd(yy,-1,DATEADD(yy, DATEDIFF(yy,0,getdate() ), 0))) and c2.DateContractFunded < (Select dateadd(ms,-3,DATEADD(yy, DATEDIFF(yy,0,getdate() ), 0))) ) As FundedLastYear
FROM Channels AS C
INNER JOIN ChannelContacts AS CC ON C.ChannelID = CC.ChannelID
INNER JOIN ChannelProductPlan AS CPP ON C.ChannelID = CPP.ChannelID
INNER JOIN tblLuMktReps AS MR ON C.MarketRepID = MR.MarketRepID
INNER JOIN tblLuHoldingCo AS HC ON C.HoldingCoID = HC.HoldingCoIDError message:
Msg 107, Level 16, State 3, Line 1
The column prefix 'Channels' does not match with a table name or alias name used in the query.
View 9 Replies
View Related
Jul 31, 2014
I need to write a process to get file size in kb and record count in a file. I was planning on writing a c# console app that takes the file path and name as a param however should i use a CLR?
I cant put a script in the ssis when it's bringing the file down because it has been deemed that we only use ssis for file consumption.
View 1 Replies
View Related
Apr 28, 2015
SELECT
P.Publication
,P.Publication_type
,S.Subscriber_ID
,S.Update_Mode
FROM MSPublications P
INNER JOIN MSSubscriptions S
ON P.Publication_ID = S.Publication_ID
give me publication_type=0. So it is transactional replication but how do we know that is pull or push?
View 2 Replies
View Related
Oct 12, 2015
I am having an issue fetching Chinese characters in a XML data type. It return questions mark (?).
Below is the sample script.
DECLARE @XMLVAR XML
SET @XMLVAR = '<?xml version="1.0"?>
<POLICY_SEARCH xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<NAME>QA*保险1</NAME><NUMBER /></POLICY_SEARCH>'
SELECTI.xmlParam.query('./NAME').value('.','NVARCHAR(25)') NAME
,I.xmlParam.query('./NUMBER').value('.','NVARCHAR(25)') NUMBER
FROM@XMLVAR.nodes('POLICY_SEARCH') AS I(xmlParam)
View 1 Replies
View Related