Our front end saves all IP addresses used by a customer as a comma separated string, we need to analyse these to check for blocked IPs which are all stored in another table.
A LIKE statement comparing each string with the 100 or so excluded IPs will be very expensive so I'm thinking it would be less so to split out the comma separated values into tables.
The problem we have is that we never know how many IPs could be stored against a customer, so I'm guessing a function would be the way forward but this is the point I get stuck.
I can remove the 1st IP address into a new column and produce the new list ready for the next removal, also as part of this we would need to create new columns on the fly depending on how many IPs are in the column.
This needs to be repeated for each row
SELECT IP_List , LEFT(IP_List, CHARINDEX(',', IP_List) - 1) AS IP_1 , REPLACE(IP_List, LEFT(IP_List, CHARINDEX(',', IP_List) +0), '') AS NewIPList1 FROM IpExclusionTest
I've a table that has salescode(124!080) and salesamount(125.65!19.25) and I need to split the columns. Salesman(124) has commission(125.65). Here is the DDL:
USE tempdb; GO DECLARE @TEST_DATA TABLE ( DT_ID INT IDENTITY(1,1) NOT NULL PRIMARY KEY CLUSTERED , InvNoVARCHAR(10) NOT NULL , SalesCode NCHAR(80) NOT NULL , Amount NCHAR(80) NOT NULL
I am trying to join two tables and looks like the data is messed up. I want to split the rows into columns as there is more than one value in the row. But somehow I don't see a pattern in here to split the rows.
This how the data is
Create Table #Sample (Numbers Varchar(MAX)) Insert INTO #Sample Values('1000') Insert INTO #Sample Values ('1024 AND 1025') Insert INTO #Sample Values ('109 ,110,111') Insert INTO #Sample Values ('Old # 1033 replaced with new Invoice # 1544') Insert INTO #Sample Values ('1355 Cancelled and Invoice 1922 added') Select * from #Sample
This is what is expected...
Create Table #Result (Numbers Varchar(MAX)) Insert INTO #Result Values('1000') Insert INTO #Result Values ('1024') Insert INTO #Result Values ('1025') Insert INTO #Result Values ('109') Insert INTO #Result Values ('110')
[Code] ....
How I can implement this ? I believe if there are any numbers I need to split into two columns .
Deciding whether or not to use a CTE or this simple faster approach utilizing system tables, hijacking them.
SELECT s.ORDER_NUMBER, s.PRODUCT_ID, 1 AS QTY, s.VALUE/s.QTY AS VALUE FROM @SPLITROW s INNER JOIN master.dbo.spt_values t ON t.type='P' AND t.number BETWEEN 1 AND s.QTY
Just wanted to know if its okay to use system tables in a production environment and if there are any pit falls of using them ?
Hi everyoneI guess this should be a simple question for the gurusI have a Data in a column which is to be places in 2 columns instead ofone. How do i go about doing it in MS SQL server? Could someone pleasehelp me. I could do it in access with an update query but things are alittle different in SQL server so I am a little lost.Eg.NameJohn?Doeto be split intoName LastNameJohn DoeThanks in advance.Prit
I like to push 1 column into 2 different columns just to show it on the screen. So no import in another table ore something like that. I have a table like this: Select Name from Cars; Result: Col1 BMWMercedesFordAudi But i like to make a query so it is displayed like this: Col1 Col2 BMW FordMercedes Audi So i can bound a table directly to that column!Is this possible with SQL, and how can i build it.Thanks.
Hi all, I have a requirement like this , I have Address Column.It is containing data like Mr. K KK Tank Guntur Jal Bhavan, Univercity Road, Rajkot 9843563469 I have to split this into 3 more columns like(Address1,name,phoneno)-- Means i have 4 columns including Address Column.(Address,Address1,name,phoneno)
Example: Address:Rajkot Address1:Univercity Road Name:Mr. K KK Tank Guntur Jal Bhavan PhoneNO:9843563469
How can i acheive this one with out data lose in Address Column. Thanks in advance.
Hi This is probably a very basic question for most people in this group. How do i split the data in a column in to 2 columns? This can be done in access with an update query but in MS SQL server I am not sure. Here is an example of what i want to acheive
I have a table with a string value, where all values are seperated by a space/blank. I now want to use SQL to split all the values and insert them into a different table, which then later will result in deleting the old table, as soon as I got all values out from it.
Old Table:
Code: ID, StringValue
New Table:
Code: ID, Value1, Value2 Do note: Value1 is INT, Value2 is of nvarchar, hence Value2 can contain spaces... I just need to split on the FIRST space, then convert index[0] to int, and store index[1] as it is.
I can split on all spaces and just Select them all and add them like so: SELECT t.val1 + ' ' + t.val2... If I cant find the first space that is... I mean, first 2-10 characters in the string can be integer, but does not have to be.Shall probably do it in code instead of SQL?Now I want to run a query that selects the StringValue from OldTable, splits the string by ' ' (a blank) and then inserts them into New Table.
Code: SELECT CASE CHARINDEX(' ', OldTable.stringvalue, 1) WHEN 0 THEN OldTable.stringvalue ELSE SUBSTRING(OldTable.stringvalue, 1, CHARINDEX(' ', OldTable.stringvalue, 1) - 1) END AS FirstWord FROM OldTable
Found an example using strange things like CHARINDEX..But issue still remains, because the first word is of integer, or it does not have to be...If it isn't, there is not "first value", and the whole string shall be passed into "value2".How to detect if the very first character is of integer type?
Code: @declare firstDigit int IF ISNUMERIC(SUBSTRING(@postal,2,1) AS int) = 1 set @firstDigit = CAST(SUBSTRING(@postal,2,1) AS int) ELSE set @firstDigit = -1
I have a single table that consist of 4 columns. Entity, ParamName, ParamsValue and ParamiValue. This table stores normalized Late Fee related parameters for apartments. The Entity field contains a code that identifies the apartment complex. The ParamName in a textual field that contains the name of the parameter that the other 2 fields define the value for; ParamsValue and ParamiValue. If the Late Fee parameter (as named in ParamName is something numerical then the value for that parameter can be found in ParamiValue else its in ParamsValue.
I don't know if 'Pivot' is the correct term to use for describing what I am trying to do because I've looked at the Pivot examples and I don't see how that will work for this. Using the Table and data as provided below, how would I construct a query so that I get 1 row per Entity in which the columns are the ParamsValue or ParamiValue for the ParamName listed in the column header (for the query)?
Below is the DDL to create the table and populate it.
USE [DBA_UTIL] CREATE TABLE [dbo].[PARAMEXAMPLE]( [Entity] [varchar](16) NULL,
I'm working on a script to merge multiple columns(30) into a single column separated by a semicolons, but I'm getting the following error below. I tried to convert to the correct value. but I'm still getting an error.
Error: "Conversion failed when converting the varchar value ';' to data type tinyint".
I am trying to break apart a list of filenames that was inserted into a database. It only breaks out the first one then moves onto the next record. If I do them individually then seem to work but not the whole table when queried. I need to break out each file into a temp table then insert them into a documents field in a database.
my filenames look like so and can have from 1 file name to 10 file names in the string.
This is my current method, I needed to create a cursor around it to go through all the records, split out the filenames and insert into a temp table. But if there is a better way ill do it. The problem with this is only the first file is getting inserted into the temp table and nothing else even if the filename has 4 files in it.
Create table #tempFiles (OldStrId int, OldPercent int, strfilename varchar(max), RequestId int, OblId int) declare @OldStr int, @OldPer int, @FileName varchar(max), @intcount int; Declare filenames CURSOR FOR Select intSTRBonusID, intPercentID, strFileName from tblSTR where strFileName > '' UNION ALL Select intSTRBonusID, intPercentID, strFileName from tblSTRHist where intPercentID in (61,62) and strFileName > ''
I need to split the amount equally into 12 months from Jan 2015 through Dec 2015.There is no date column in the table and the total amount has to be splitted equally.Guess I can't use Pivot here because the date column is not there ...How can I achieve this ?
CREATE TABLE #tbl_data ( Region Varchar(25), Amount FLOAT,
I am working now on optimization of an update query for a particular table and I want to measure the number of page splits after each update. How to check it?
I am trying to split the annual cost into monthly numbers based on the contract Period.Since the contract period varies from company to company not sure how to implement the logic.
I was contacted by the SAN team to test backup/restore of larger databases using a split-mirror backup (BCV) or clone that is taken from production db server and copied to another sql box. They want to use this process once a week. I see the mounted drives with the data/log files. All looks good. Initially I attempted to attach the databases and received (Unable to open the physical file db.mdf Operating System Error 5 Access is denied). I manually granting SQLServerMSSQLUser$<computer_name>$<instance_name> on all of the physical files 20 total. That worked.
Since this will be weekly, the SAN team performed the copy again and now none of the databases can communicate with the newly copied files. NTFS permissions need to be set again. I'm getting (Operating System error 21: the device is not ready). Is there something that I'm missing in this process how the vendor BCV clones the data and SQL communicates with the copied files as I was thinking it would be more automated process?
I have a string that contains series of parameters with separators.i need to split the parameters and its values as rows and columns.e.g string = "Param1 =3;param2=4,param4=testval;param6=11;..etc" here the paramerter can be anything and in any number not fixed parameters. Currently am using the below function and getting the parameters by each in select statement as mentioned below.
select [dbo].[rvlf_fn_GetParamValueWithIndex]('Param1=3;param2=4,param4=testval;param6=11;','param1=',';') as param1, [dbo].[rvlf_fn_GetParamValueWithIndex]('Param1=3;param2=4,param4=testval;param6=11;','param2=',';') as param2 CREATE FUNCTION [dbo].[rvlf_fn_GetParamValueWithIndex] ( @CustomProp varchar(max),
Create table DBInfo (Path varchar (500)) Insert into DBInfo values('/Data Sources') Insert into DBInfo values('/Data Sources/SALES') Insert into DBInfo values('/PRODUCTION') Insert into DBInfo values('/PRODUCTION/SERVICE') Insert into DBInfo values('/PRODUCTION/SERVICE/MAINTENANCE') Insert into DBInfo values('/PRODUCTION/SERVICE/LOGISTICS')
My Expected Output
Column1,Column2,Column3 Data SourcesNullNull Data SourcesSalesNull PRODUCTIONNullNull PRODUCTIONSERVICENull PRODUCTIONSERVICEMAINTENANCE PRODUCTIONSERVICELOGISTICS
I am getting an error importing a csv file both using SSIS and SSMS. The csv is comma delimited with quotes for text qualifiers. The file gets partially loaded and then gives me an error stating The column delimiter for column "MyColumn" was not found. In SSIS it gives me the data row which is apparently causing the problem but when I look at the file in a text editor at the specific row identified the file has the comma delimiter and it looks fine. I am using SQL Server 2008.
So I have been trying to get mySQL query to work for a large database that I have. I have (lets say) two tables Table_One and Table_Two. Table_One has three columns: Type, Animal and TestID and Table_Two has 2 columns Test_Name and Test_ID. Example with values is below:
In Table_One all types come under one column and the values of all Types (Mammal, Fish, Bird, Reptile) come under another column (Animals). Table_One and Two can be linked by Test_ID
I am trying to create a table such as shown below:
This should be my final table. The approach I am currently using is to make multiple instances of Table_One and using joins to form this final table. So the column Bird, Reptile, Mammal and Fish all come from a different copy of Table_one.
For e.g
Select Test_Name AS 'Test_Name', Table_Bird.Animal AS 'Birds', Table_Mammal.Animal AS 'Mammal', Table_Reptile.Animal AS 'Reptile, Table_Fish.Animal AS 'Fish' From Table_One
[Code] .....
The problem with this query is it only works when all entries for Birds, Mammals, Reptiles and Fish have some value. If one field is empty as for Test_Two or Test_Three, it doesn't return that record. I used Or instead of And in the WHERE clause but that didn't work as well.
Recently I have come across a requirement where i need to design a table.
There are some columns in table like below with DECIMAL Datatype:
BldgLength
BldgHeight
BldgWeight
Based on my knowledge, i know that values before Floating-Point will not be more than 4 digits.
Now as per MSDN,
Precision => 1 - 9 Storage bytes => 5
so i can create column as:
BldgLengthDECIMAL(6,2) DEFAULT 0
OR
BldgLengthDECIMAL(9,2) DEFAULT 0
Now while reading some articles, i came to know that when we do some kind of operation like SUM Or Avg, on above column then result might be larger than current data type.
So some folks suggested me that i should keep some extra space/digits considering above MATH functions, to avoid an Arithmetic Over Flow error.
So my question is what should be value of DataType for above column ?
The query Im running so far is wrong, but here it is...
SELECT t.FromUserID, t.ToUserID, t.msg, u.UserName AS UserFrom, u.GroupID AS FromGroup, u2.UserName AS UserTo, u2.GroupID AS ToGroup FROM tmp_Messages t LEFT JOIN (SELECT UserID, GroupID, UserName FROM tmp_users WHERE GroupID = 3) u
[Code] .....
im missing the details of one of the users.I know what the problem is, I just cant figure out how to get this working without using temp tables, which I cant do in the production version.
