We are adding 4-5 indexes to one database and dropping 2 unused indexes. I don't have proper testing environment. How to monitor these indexes changes? Do we need to run any baseline but we don't get load all the time same load all the days
View 8 RepliesI've been put in a situation where I have a number of SQL DB's running on 2005/2008 which I have responsibility for. I've been given limited information so am looking at a starting point to determine where I go from here.
I have of course ensured there is a backup strategy in place to secure the data.
I'm trying to run a query to check the downtime in production lines, but if a line has assigned more than one cause for the downtime it repeat the info for each cause.
This is the code.
SELECT D.Line AS Line, D.ProductionLine AS ProductionLine, D.Shift AS Shift, D.DownTime, CONVERT(VARCHAR(10), D.DatePacked,101) AS DatePacked, AssignedDowntime, (D.DownTime - AssignedDowntime) AS NOASSIGNED,
R.Enviromental,R.Equipment, R.IT_Systems, R.Material_External,R.Quality,R.Material_Internal,
R.Method,R.PreProduction,R.People
FROM (
SELECT Line, Shift, DatePacked, SUM(Cast(Downtime AS INT)) AS AssignedDowntime,
[Code] ....
I'm expecting that if is more than one "Down Reason "it will include in the same line. At this moment if i have more than one reason it create a line for each one for example:
If i have a total Downtime of 50 minutes and they are assigned 10 for itequipment, 30 by testequipment and 10 assigned to quality issues i will have and output like this:
Line Total_Downttime By itequipment by_testequipment bypeopleissues byquality
line1 50 0 30 0 0
line1 50 10 0 0 0
line1 50 0 0 0 10
What i want is to have a output like this:
Line Total_Downttime By itequipment by_testequipment bypeopleissues byquality
line1 50 10 30 0 10
All in one line.
Production and development servers are on different domains and they do not trust each other. How do I import data from the table t1 from a database db1 in production and load it into table t1 inside database db1 in development?
View 3 Replies View RelatedI am getting following deadlock message. What is happening in below deadlock?? Also what can I do to get rid of this deadlock?
View 7 Replies View RelatedI have a table which has cluster index on col1 column. If i insert 10 into my table what would be cluster index key value?Is it going to be 10 as well? How do i get cluster index key value?
View 5 Replies View RelatedAfter reading some comments here I decided to look at tables to see if any had a clustered index that was a unique identifier. Yep. So if I have a table with a unique identifier as the primary key/clustered index and an identity column that is indexed, I would like to make the identity a clustered index (maybe even the primary key) and make the unique identifier a unique non-clustered index (not the primary key).
Does this sound reasonable?If I do this will I need to drop and recreate the other indexes? Or maybe just rebuild the other indexes?
Currently:
CREATE TABLE Payments (
IDX INT IDENTITY(1,1) NOT NULL,
GUID UNIQUEIDENTIFIER NOT NULL DEFAULT(NEWID()),
.....
-- many other columns
);
GO
ALTER TABLE [dbo].[PAYMENTS] ADD CONSTRAINT [PK_PAYMENTS_GID] PRIMARY KEY CLUSTERED ([GUID] ASC);
GO
CREATE NONCLUSTERED INDEX [IX_Payments_ID] ON [dbo].[PAYMENTS] ([IDX] ASC);
GO
Would like:
ALTER TABLE [dbo].[PAYMENTS] ADD CONSTRAINT [PK_PAYMENTS_IDX] PRIMARY KEY CLUSTERED (IDX ASC);
GO
CREATE UNIQUE NONCLUSTERED INDEX [IX_Payments_GUID] ON [dbo].[PAYMENTS] (GUID ASC);
GO
I've yet to use partitioning in a production environment, and pretty much last ran any partitioning related code a few years back when looking at certification; so I'm definitely not an expert on the matter and only loosely clued up on the concepts.
I've recently started with a new employer, and they have just implemented a new system for sms messaging. The database tables tracking the sms messages being sent are going to get big and so they have created decided to implement partitioning on some of the tables using a partition scheme on the CreatedDate column; the DBA involved in designing the partitioning has left and I'm picking this up.
The relevant DDL for the table is below:-
CREATE TABLE [Message].[Sms](
[SmsId] [bigint] IDENTITY(250000001,1) NOT NULL,
[CreatedDate] [datetime] NOT NULL CONSTRAINT [DF_Sms:CreatedDate] DEFAULT (getdate()),
CONSTRAINT [PK_Sms:SmsId] PRIMARY KEY NONCLUSTERED
[code]....
There are some issues with the above that I will be addressing seperately (e.g. the clustered index should be unique as it contians the unique key, and the fillfactors are daft), but my concerns for this post are below.
1) How to define the Primary Key and enforce it's uniqueness whilst trying to ensure it's aligned with the partition in order to be able to switch out old data once an as yet undefined retention period has passed. In books online it states:- "If it is not possible for the partitioning column to be included in the unique key, you must use a DML trigger instead to enforce uniqueness. " Books online - Special Guidelines for Partitioned Indexes. However, I'm not sure what this means, nor how I create the primary key to use the partition function seeing as it doesn't have the CreatedDate in the unique key?
2) The original partition function was envisaged as the following:-
CREATE PARTITION FUNCTION [DateFunction](datetime) AS RANGE
LEFT FOR VALUES (N'2014-01-01T00:00:00.000'
, N'2014-04-01T00:00:00.000'
, N'2014-07-01T00:00:00.000'
, N'2014-10-01T00:00:00.000'
, N'2015-01-01T00:00:00.000'
, N'2015-04-01T00:00:00.000'
, N'2015-04-02T00:00:00.000'
, N'2015-04-03T00:00:00.000'
, N'2015-04-04T00:00:00.000'
, N'2015-04-05T00:00:00.000')
GO
There is a procedure that has been created and scheduled daily that will create a new partition for each day, and then merge these together at the end of the quarter. My understanding of partitioning is that this is a bad idea, as it will result in merging several populated partitions together. Is my understanding correct? If so, I'm planning on removing the day partitions at the end of the function, and simply adding quarterly partitions, maintaining a spare empty partition at the end of the table. Would this make more sense?
I just did index defragmentation for some databases include MSDB . I notice there are 3 indexes from MSDB database that fragmented quickly ( I did rebuild last nite at 10 PM - > fragmentation level becomes zero but today at 9 am it become 80 % ).The indexes are backupsetuuid, backup media family uuid, backupmediasetuuid. I am thinking to set the fill factor for those indexes = 80 respectively.
View 6 Replies View Relatedjust i see a database and a table 'tbl_OutBox_MT' where there is now primary key and have index (non unique, non cluster). and it store almost 3000000 data per everyday. and wipe out data from their and archive all data to other location and broadcast this table 'tbl_OutBox_MT' by mobile operator everyday from morning to evening. but when it perform broadcast it to mobile operator it takes huge time. because this table gather data from different sources (tables) by using complex query and INSER INTO statement and insert into this table.
I need to perform first, my observation is there is no primary key. when i run any complex query into this table it takes huge time and sometimes shows transaction deadlock error.
CREATE TABLE [dbo].[tbl_OutBox_MT](
[TRAN_ID] [varchar](36) NOT NULL,
[OUT_MSG_ID] [int] IDENTITY(1,1) NOT NULL,
[OUT_MSG_ID_TELCO] AS (CONVERT([bigint],((((CONVERT([varchar](4),datepart(year,[PROCESS_TIME]),(0))+case len(CONVERT([varchar](2),datepart(month,[PROCESS_TIME]),(0))) when (1) then '0' else '' end)
[code]....
Does including non-key columns work for the performance of an index?
View 8 Replies View RelatedGive a user table ‘MyTable’. How to know whether the table contains a non-unique clustered index by using SQL query?
View 2 Replies View RelatedI am new to mssql server. There is a table on one of my databases that occupies a lot of space. And the space usage is as follows: (all values in KB)
reserved: 42329064
data: 16272288
index: 26050032
unused: 6744
This table takes up almost 80% of my database size, and the information is this table just captures the time spent by a user on the website(not very critical data)
I would like to know how to delete the entire index (which is what is occupying most space) to free up disk space. the index is a clustered index.
I run a query
select col1, col2, col3, col4
from Table
where col2=5
order by col1
I have a primary key on the column.The execution plan showing the clustered index scan cost 30% & sort cost 70%..When I run the query I got missing index hint on col2 with 95% impact.So I created the non clustered index on col2.The total executed time decreased by around 80ms but I didn't see any Index name that is using in the execution plan.After creating the index also I am seeing same execution plan
The execution plan showing the clustered index scan cost 30% & sort cost 70% but I can see the total time is reducing & Logical reads on that table is reducing.I am sure that index is useful but why there is no change in the execution plan?
I am extremely new to database design, and I ran into a problem that I know comes up often, however has many opinions...
Basically I have a table that is going to have 50+ columns. The natural key on this table is actually 8 columns wide, 4 of them being Varchar columns by default. (varchar(50)'s).
I have added an identity column, (1,1) to the table, however I put the clustered index on the 8 natural keys... My plan is to rebuild the clustered index once nightly when the system isn't in use (after 7 pm).
I know others would say it would be better to have the clustered key on the 1,1 column and then add indexes on the other 8 fields... However I don't quite understand why honestly...
Every single query against this table will use the 8 columns, and will NOT use the Identity column (1,1) because they are calls from other systems that do not know the Identity column....
Therefore if your database is set up for query speed, and every single query has to have a value for 8 columns to get a valid result, does it make sense to put a clustered index over the 8 columns?
If not why? Why is putting a clustered index on an identity column (that will literally never be used in a query) a better solution?
Table Name: Denominator
Already has the following constraint:
PK_Denominatorclustered, unique, primary key located on PRIMARY DenominatorID
How can I add a unique key that will cover the 3 fields --> MemberID,MeasureID,TimePeriodID
I also want to know whether we can include the " WITH ( IGNORE_DUP_KEY=ON ) "
that violates the targets referential integrity?I am getting error Msg 2601, Level 14, State 1, Line 1Cannot insert duplicate key row in object XXX with unique index YYY.The statement has been terminated.I would like to know if there is a way to examine or determine what source rows are not conforming to the unique index.I'm fine with dropping and reestablishing the index, and i know its cataloged somewhere because during index creation, the error message does tell you the row details clobbering index creation. Ideally i would like to be able to trap all the failing rows and see what i can do about rehabilitating them or ignoring them or managing them some other way, but id like to know what the server knows when it will not create the index.
View 2 Replies View RelatedWhat is the best way to forecastestimate space for non-clustered index on a table?
Example :
Table name : Test123
Row : 170000000
Reserved : 18000000 KB
Data : 70000000 KB
Index: 40000000 KB
Note: Test123 already has clustered index and 2 non clustered indexes.
I have query with an expensive Key Lookup on a joined table. The predicate is the column that I'm joining on, and the output list contains two columns from the joined table.
I've created a basic non-clustered index covering the predicate column and include-ing the two output columns. However, the execution plan ignores this, and insists on using the primary key of the joined table to do the expensive key lookup. I've tried adding the included columns to the index directly and there's no change. I've also tried running dbcc freeproccache and no change.
We noticed a deadlock 3-4 weeks ago on a table (table1) and deadlock graph was captured.
When I am analyzing the deadlock graph, page number using DBCC PAGE, I am getting the object id for a different table (table2). But deadlock graph shows the name of the object as table1.
Is it possible that subsequent defragmentation of indexes would have caused the respective page id to got re-allocated to a different table? I checked the deadlock graph lately only after 3-4 weeks.
Hi ALL,
I have a 5G database with 1G log file running on SQL server6.5. I would like to establish a short list of performance Monitor objects (NT & SQL server) so that is adequate to capture application performance.
I would like to get some advice:
1.What kind of objects should I monitor on my list?
2.How to automate the process (via a resource kit utility?) to save a new log file off daily and manage an archive process?
3.How to set alerts/notification (but no SQL mail is available now)?
Any help would be appreciated and thanks in advance.
Stella Liu
Hello, I'm running sql2k sp3 on a win2k server. I run the baseline security Analyzer and get yellow (X's) for unchecked buffer in windows help facility, ms02-55.
Flaw in SMB signing could enable group policy to be mofdified, MS02-070
These warnings are telling me that my file versions are greater than expected. the file i have is version 5.2.3718.0 and the one it wants is 5.2.3669.0 and its the same for the other file as well. do i need to fix this?
Sarfaraz writes "I have captured SQL Profiler data. I was reviewing top running CPU intensive SQL statements. The Duration (in seconds) 1.39, 1.09, 0.16 and CPU (in seconds) 0.97, 0.95, 0.16 respectively for some SQL statements. How do I know what is the normal baseline for duration and CPU in order to determine the CPU intensive SQL statements.
Secondly same question for long running procedure duration 0.14, 0.11. What is the normal baseline here. Is this normal or too long.
Thanks,
Sarfaraz"
Hi all,
I want to create a server performance baseline report for my database server. I know I can use System Mointor and SQL Profiler to monitor the server by reading the "SQL Server Books Online". However, there have too many counters, I don't know which counters should I use. If I choose to use the counter, I don't know what is the expect value for the counter.
For example, SQL Server: Buffer Manger Object has almost 22 counters. Which counters should I monitor? If I monitor AWE Lookup Maps/Sec, then what is the expect value for the good performance.
Anyone know a good refer or test book can help me to create a basline report
Thank a lot!
I am training to be a DBA in a company running about 30 machines with MS SQL Server (2000 and 2005). Last week I went to a class where the instructor recommended establishing a performance baseline using windows performance monitor. He also advised to run perfmon remotely so as to not effect the performance.
What I am wondering is since I have so many different machines to baseline, can I run perfmon on one box, using a seperate counter log for each server? I would like to get a nice week-long baseline for each machine, but I also don't want to get bad data by running too many logs at the same time.
My plan is to do a small set of counters for processor, memory, disk, and the SQL server instance(about 10 counters total).
If anyone has experience in this area, I would appreciate any advice that you might have.
Thanks,
Matt
What is the best method of creating schema creation scripts that can bestored into a version control system. The process of using em togenerate a script is not an appealing option. I am still learning theMS Sql sys tables and have not found a useful list of all the codes &types to join the tables etc.mike--Posted via http://dbforums.com
View 2 Replies View Related
Hi
I downloaded MBSA and ran it against my SQL 2005 Server. It tells me that I have a severe risk because
'The following databases have public access.Remove the public access if it is not required - tempdb , model , msdb , ReportServer , ReportServerTempDB'
I have checked these databases and each have the Guest User but it is disabled. If I check the database properties the public role has no permissions against the listed databases.
Is this a bug with MBSA? If not how do I remove Public Access?
We have a new database with cdc enabled on all of its tables. This causes the index maintenance task to fail with following message:
"Executing the query "EXEC DBName.dbo.IndexDefrag_sp" failed with the following error: "The unique index 'PK_TableName' on source table '[dbo].[TableName]' is used by Change Data Capture. To alter or drop the index, you must first disable Change Data Capture on the table. The transaction ended in the trigger. The batch has been aborted.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly" We would like to run the index maintenance without losing the cdc data. We plan on installing SP2 on SQL Server 2008 R2 soon, would that solve the issue? Disabling the cdc prior to index maintenance and then re-enabling back upon completion; would delete the data as I found in most discussions, but we would like to retain it.
Any method on creating baselines for your stored procedures/objects.
View 4 Replies View RelatedI'm trying to run the SQL Server 2012 Best Practices Analyzer. After learning that I first had to install the Microsoft Baseline Configuration Analyzer, I did that.
When I tried to run the Microsoft Baseline Configuration Analyzer/Best Practices Analyzer remotely, though, I got an extremely verbose error message and want to confirm if I really need to do all of the steps involved on each target server that I want to analyze.
Here is what I tried after launching the Microsoft Baseline Configuration Analyzer application (I'm using 'MYSERV' as the target server name):
1. Clicked on "Connect to another computer"
2. Clicked "Another computer:" entered: MYSERV
3. Checked the "Connect as another user:" box
4. Clicked "Set User..." added by Windows credentials.
5. Checked the Use CredSSP box
6. Clicked OK.
After a second or two, the error below came back. Is that what I have to do on each remote computer to run the analyzers?
Microsoft Baseline Configuration Analyzer
Connecting to the remote server failed with the following error message : The WinRM client cannot process this request. CredSSP authentication is currently disabled in the client configuration. Change the client configuration and try the request again. CredSSP authentication must also be enabled in the server configuration. Also, Group Policy must be edited to allow credential delegation to the target computer. Use gpedit.msc and look at the following policy: Computer Configuration -> Administrative Templates -> System -> Credentials Delegation -> Allow Delegating Fresh Credentials. Verify that it is enabled and configured with an SPN appropriate for the target computer. For example, for a target computer name "myserver.domain.com", the SPN can be one of the following; WSMAN/myserver.domain.com or WSMAN/*.domain.com For more information
[URL]
There are a few features in the new SQL Server - Reporting Services that I really need in production. I have tested everything and it works great. I am running the CTP version since Microsoft is saying they aren't releasing the release version until 3rd quarter 2008.
Since Microsoft won't sell SQL 2008 until 3rd quarter, can I run the CTP in production until the release and then purchase SQL 2008?
Jim
Hello - does anyone have experience w/SQL Server 2005 in a virtual environment? I'm considering this for a production environment but not sure if performance will suffer. Our databases will have a lot of writing but not too much reading. A SSRS solution is currently the only app. connecting to the SQL db. Max users to server at any given time will be very low (~10 users max). But the databases are pulling in data from other, outside multiple data sources on a daily basis.
Any pointers to documentation or any advice?
Thanks,
A Brown
please explain the differences btween this logical & phisicall operations that we can see therir graphical icons in execution plan tab in Management Studio
thank you in advance