I have a DB with TDE enabled on Enterprise edition sql server 2008r2. I am actually planning on moving the DB to sql server 2008r2 standard edition. How to accomplish it properly. I don't think SQL Server 2008r2 standard edition support TDE. I can only think of turning off the encryption, but is there anything else I should know?
View 3 Replies
Dear All,
I would like to ask you all a few questions. Please kindly inform me the related links if this topic is already brought before.
Is SQL Server 2005 Standard Edition compatible with Windows Server 2008? Can it run well there?
If not, what do I need in order to install it on my server?
Thank you so much for your kind attention and look forward to hearing from you all soon.
Warm regards,
Newbie_Newbie
I have been tasked with upgrading around 150 SQL Server 2000 DTS packages to SSIS in SQL Server 2005 standard edition. I made a backup of the 2000 database upon which the DTS packages operate and restored it to the SQL 2005 server. So far, so good. I have the database in place. Now I need to get the DTS packages themselves into the SLQ 2005 server. I think I need to check my install and make sure that I have the SQL Server 2000 DTS services installed on the SQL 2005 server. I can do that.
However, I wonder what would be the most effective way to physically get the packages from the SQL 2000 server to the SQL 2005 server. Should I use structured storage files? If so, how do I go about opening them in SQL 2005 in order to save them to SQL server 2005?
I should mention that these packages make heavy use of ActiveX scripting so I am looking at rewriting them from scratch to be SSIS packages. I just need the packages on the SQL Server 2005 box so I can make sure I am creating exactly the same functionality in 2005 as existed in SQL server 2000. Each DTS 2000 individual package tends to be fairly simple and I think I can greatly improve the process by consolidating them.
Thanks in advance for any advice.
S. Wells
I have a database with Broker_Enabled set via the following command:
ALTER DATABASE 'xxxx' SET ENABLE_BROKER
All works well, I made a backup and want to move to my development machine. When I run I still get an error saying I need to enable broker service again.
"The SQL Server Service Broker for the current database is not enabled, and as a result query notifications are not supported. Please enable the Service Broker for this database if you wish to use notifications."
How can I move the database and get this setup? Where are the BrokerID's Stored?
Thanks,
~ Steve
Hello -
I have 2 databases on a remote server on which Replication and Replication Monitor is enabled. Now I want to move this databases from different remove location.
How do I transfer bboth databases with replication and replication monitor enabled on it with all the user logins.
Please help me out.
Thanks.
Hi
-I have istalled sql server 2005 standard edition , I want to install sql server 2005 enterprise edition on the same machine.
Is it possible? I have Microsoft windows server 2003 SP2 and 1GB RAM.
I want to use partition function with the enterprise edition, will the trial version of sql server work for me?
-If I have already created a database and tables using the standard edition, will I be able to access and use the database using the installed trial version or will I have to start a fresh creating a new database?
- Is it possible to access the same database with any of the installed versions?
BTW, I am prety new to sql server and databases , I am trying to learn by myself
Thanks
Hello!M a newbie.. I just want to know, that wots the difference b/w SQL Server Standard Edition and Express Edition.?And can I use Visual Studio 2005 (Professional Edition) with SQL Server Express Edition.?
View 1 Replies View RelatedDear All,We have a database which contains many tables which have millions ofrecords. When We attach the database with MS SQL Server 2005 StandardEdition Server and run some queries (having joins, filters etc.) thenthey take very long time to execute while when We execute same querieson Enterprise Edition then they run 10 times faster than on standardedition.Our database does not use any features which are present in EnterpriseEdition and not present in Standard Edition. We want to know what arethe differences between Standard Edition and Enterprise Edition forperformance. Why should we go for Enterprise Edition when StandardEdition has all the features required.We are presently using evaluation versions of SQL Server 2005 Standardand Enterprise Editions.Thanks and regards,Nishant Sainihttp://www.simplyjava.com
View 23 Replies View RelatedI am attempting to upgrade a 2005 Standard Edtion to Enterprise Edition. This is a default instance. All components are upgraded successfully except the Database Engine. I receive the following error:
SQL Server Setup has encountered the following problem: [Microsoft][SQL Native Client][SQL Server]The certificate cannot be dropped because one or more entities are either signed or encrypted using it.. To continue, correct the problem, and then run SQL Server Setup again.
This installation does not have encryption enabled, so I do not undersand the error or how to correct it.
After rebooting the SQL instance appears to be upgraded to Enterprise, but it cannot be upgraded to SP2.
Thanks,
I'd like to upgrade from my current SQL Server version: 09.00.3042 (Workgroup edition that comes with SBS upgrade) to the standard edition that I've just purchased. I've attempted to run setup.exe SKUUPGRADE=1 from the command prompt and it just tells me that there's nothing new to install.
I don't really want to uninstall the current installation just to do something that shouldn't be complicated to do, upgrading software versions should not be a difficult process.
Does anybody have any experience with this?
As an ISV, I want to certify my product on Standard Edition. I am using Developer Edition everywhere. Is there a way I can do the certification using the Developer Edition, or do I need to obtain/purchase a copy of the Standard Edition?
View 3 Replies View Related
Hello all,
Here I need some help or suggestions for the following topic...
I am using SQL server 2000 enterprise edition installed on the machine. Now I wanted to change the edition from enterprise to standard.
There are around 4 user databases exists on the server.
What are the areas I have to take care while doing this? Could I do as normal installation?
No log shipping implemented on the server.
Your suggestions would be very helpful to me.
Thanks in advance.
Hi,
I would like to find out if there is any way to upgrade SQL Server 2000 (Ent) to 2005 (STD)
The Instance has many logins and jobs etc and I dont want to loose those
A document or some advice on how to go about it would help
Thanks
I tried to download PerformancePoint Server Trial Version to ther server today and I got to the configuration point of the Analysis Services Setting, and when I clicked next to proceed with the configuration I got a popup error message:
"Microsoft Analysis Server must be Evaluation, Developer or Enterprise Edition".
Now I have SQL Server 2005 Developer Edition Disc (Bought it with Visual Studio 2005) but on the server I have SQL Server 2005 Standard Edition, if I try to run the sql server developer Edition disc, I use the wizard download and it seems that the download is going through the SQL Server entire download, it's like I'm re-downloading SQL Server all over again.
Does that seem right?
what is the best approach to work around this probelm?
I appreciate any help
Thanks
Sql server 2008R2 (SP2) Ent, PROD DB myDB was encrypted. During Release mistakenly (Vendor created script blames some settings in ...- actually does not matter) Decryption started (ALTER .. SET ENCRYPTION OFF) as we got from ErrorLog.
For some reason initial encryption scan was aborted and then mentioned command: ALTER ... OFF was issued again. What we have now (after 60 h of decryption- encryption took only 2.5 h)- is_encrypted = 0 in sys.databases, encryption_state = 5 (decryption in progress) in sys.dm_database_encryption_keys (percent_complete= 0). But it seems myDB is still encrypted- I made a backup of myDB and tried to read it (restore filelistonly) from other server (with no encryption)- failed- asked for key. Seems metadata was changed when initial scan during decryption started but then stuck and (if I am correct) decryption was never completed. Question- any similar experience? How we can fix meta- data, i.e. assuming that myDB is still encrypted we should have is_encrypted = 1 and encryption_state = 3 (encrypted).
I restarted the sql server after c2 audit was enabled and now i can not start the instance getting this error below. how do i bring the sql server up?
Cannot start C2 audit trace. SQL Server is shutting down. Error = 0x80070003(The system cannot find the path specified.)
UAT environment : SQL Server 2008 R2 SP3 Enterprise Edition
SANDBOX environment : SQL Server 2008 R2 SP3 Standard Edition
I have a database backup (.bak) that was taken from UAT environment that has CDC enabled on some tables. I want to restore that database into my SANDBOX environment which does not support CDC (because of standard edition). The restore process fails due to this incompatibility. Is there any way to restore without CDC (I dont CDC enabled on my SANDBOX; just my data from the backup) ?
SQL Server 2005 sp2 Standard Edition.
I have a bunch of databases to relocated. relocating them on the same server - I just want to split the data and log files onto their own Volumes. these DBs have Full Text Indexing enabled.
This Server is a brand new build and NOT in production yet
How is the best way to move these Dbs and how do locate and move the full text catalog for each?? or do I even have to worry about that?? Is back-restore (with move) better for this?
When I look in BOL.. here is the syntax for an attach
USE master;
GO
--Detach the AdventureWorks database
sp_detach_db AdventureWorks;
GO
-- Physically move the full text catalog to the new location.
--Attach the AdventureWorks database and specify the new location of the full-text catalog.
CREATE DATABASE AdventureWorks ON
(FILENAME = 'c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataAdventureWorks_Data.mdf'),
(FILENAME = 'c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataAdventureWorks_log.ldf'),
(FILENAME = 'c:myFTCatalogsAdvWksFtCat')
FOR ATTACH;
GO
Do I have to move the Full text Catalog? If so, how do I find it's current location. If I do have to move it, where is the best place to locate the catalogs???
Hello,
I have been unable to create a replication from an SQL Server 2005 standard edition database to remote SQL Server 2005 Express Edition. The remote express edition is on a Virtual Private Server we are leasing from a hosting company. The name of the remote DB is similar to vs572.si-vs572.com. I can connect to this with SQL server authentication through Management Studio and also with SSIS. But, I have been unable to create a push subscription (I have tried a test push subscription with the same publication to a local SQL Express server here in our office and this works fine).
Here is the error message: SQL Server Replication requires the actual server name to make a connection to the server. Connections through server alias, IP address, or any other alternate name are not supported. Specify the actual server name, 'VS572SQLEXPRESS'.
The hosting company had originally installed a shared SQL server which would not support replication. They then installed SQL Express edition and I was hoping this would allow us to run a replication.
I tried to connect to VS572SQLEXPRESS with out any luck. I check the remote connections, made sure replication was installed, etc., but no luck.
Any help would be greatly appreciated!
Thank you,
Albert
Hi there
Our ISP hosts our data on SQL Server Enterprise, but I also going to host the databases on my local machine.
As it's just local would Standard edition do? If I migrate the databases over, will it work?
Thanks in advance.
I know this has probably been asked before, but I couldn't find it in the Forum...
I have a SQL Server STND edition Instance on a running on Windows 2000 Server. How Can I tell if the instance is named or default and how many named Instances can I add to this install????
Is is just as simple as rerunning the Install? How about Service Packs?
Can we install SQL Server 2000 Standard Edition on Win XP professional?
Thanks
I am running Win2k Professional version SP2. I tried to install the SQL Server 2000 Standard Edition, I got error message said " MS Sql Server 2000 Standard Edition server component is not supported on this operating system. Only client components will be available for installation."
View 1 Replies View Related
I am currently trying to migrate to a new computer. My old computer (Box 1) has Windows 2000 Ver 5.0 SP4 as an operating system. My new computer (Box 2) has Windows XP Professional Ver 5.1 SP2 as an operating system.
Currently, I have Microsoft SQL Server 2000 running on Box 1. When I used the CD to install the software on Box 2, it will not allow a full install. Just the Client portion. The exact message I get is "Microsoft SQL Server 2000 Standard Edition is not supported on this operating system. Only client components will be available for installation.
How in the world do I get this software to install on Box 2? I've seen and downloaded, the service packs but I don't know where to go from there.
Thanks in advance for any help that you can provide.
I have the option of buying a new copy of MS SQL Server 2005 Standard Edition for Itanium based systems, however will this also work on the following spec server
2.8Ghz P4
1Ghz Ram
120Gb IDE hard drive
with windows 2003 standar edition operating system
The part number for the stanard edition of SQL is 228-04025
If it helps you can call me on +44 (0) 1285 644091
Thanks
Simon
Hi,
Can we degrade from SQL Server 2000 Enterprise Edition to SQL Server 2000 Standand Edition without doing Uninstall and reinstall?
Thanks in advance,
Hi all--I'm researching the cleanest downgrade path from a trial edition of SQL Server 2005 Enterprise to a licensed Standard Edition copy. It looks like downgrading will entail uninstalling the old version and installing the new version, but I'd like to save the original setup as much as possible. Detaching the old databases will preserve the non-system databases; what method would work best for restoring the system databases?
Thanks!
- Jon
The enterprise edition of SQL server includes some advanced BI features, for example the fuzzy lookup feature of IS. If the IS package lives on an enterprise edition of SQL server and the database the package it is targeting lives on a standard edition of SQL server can the advanced features be used? Can you run a fuzzy look against a database on a standard edition of SQL server when th IS package lives on an enterprise edition of SQL server? THANKS!
View 1 Replies View RelatedHi,
I have recently upgraded a SQL x64 server from Developer Edition to Standard Edition, This succeeded without issue. Following a reboot SQL Server yielded the following message
Your SQL Server installation is either corrupt or has been tampered with unable to load SQLBoot.DLL. Please uninstall then re-run setup to correct this issue.
Please can anyone help ?
Many Thanks
Marcus Stuart
I believe it is possible to restore databases from Enterprise edition to an enviroment with Standard edition. We have been able to do it on databases without any partitioned tables. But if a database has partitioned tables it will not start up in the Standard edition after a successful restore. The error log states that the database will not start because partitions are not allowed in Standard edition (which we knew). But we were led to believe that the databases would restore and open fine, the partitions would just not be there in Standard edition. Are we possibly doing something wrong or will this just not work?
Thanks
Chris
I found so many websites wrote that fuzzy grouping ,fuzzy lookup, term extraction, term lookup,Dimension processing destination adapter and Data mining model training destination adapter only available at Enterprise Edition.
Anyway i still can use these components at Standard Edition.
Is that any features different between these two edition for these components? Thanks
I'm getting some conflicting information , regarding sql 2005 Standard Edition licensing for multi instancing.
If you have multiple instances of SQL 2005 Standard Edition on one Server, do you need to pay a server license for every Instance or just the one Server license?
Jack Vamvas
--------------------
Search IT jobs from multiple sources- http://www.ITjobfeed.com
The Microsoft OLEDB provider for DB2 (DB2OLEDB) is available in the "Feature Pack for SQL Server 2005 €“ April 2006." The installation routine, however, will only install on the enterprise edition or the developer edition. Is the DB2OLEDB provider not available for SQL Server 2005 standard edition?
View 9 Replies View Related