SQL Server 2008 :: Query A Column Of XML Files In A Table
Apr 30, 2015
I want to query a column of xml files in a table,
use mysql1
declare @bp xml
select @bp=xml
;WITH XMLNAMESPACES('http://schemas.openehr.org/v1' as bp,'http://www.w3.org/2001/XMLSchema-instance' as xsi,'OBSERVATION' as type)
select * from (
select
m.c.value('(./bp:data/bp:items[1]/bp:value[1]/bp:magnitude)[1]','int') as systolisch
from
BloodpressureMitSchema cross apply
@bp.nodes('/bp:content/bp:data/bp:events') as m(c))m
But with this "cross apply" I can only query all the values in one xml and repeat them. Is there something wrong at "declear"
I have a table with lots of xml files in one column(more than 1000), like this
1. <content xmlns:xsi="http://www.w3.org/2001/XMLSchema... 2. <content xmlns:xsi="http://www.w3.org/2001/XMLSchema... 3. <content xmlns:xsi="http://www.w3.org/2001/XMLSchema...each is big
I want to query some values for all to see the duration but now I can only query one of them
declare @bp xml select @bp=xml from bloodpressureohneschema ;WITH XMLNAMESPACES('http://schemas.openehr.org/v1' as bp,'http://www.w3.org/2001/XMLSchema-instance' as xsi,'OBSERVATION' as type) select * from( select m.c.value('(./bp:time/bp:value)[1]','date') as time, m.c.value('(./bp:data/bp:items[1]/bp:value[1]/bp:magnitude)[1]','int') as value from @bp.nodes('/bp:content/bp:data/bp:events') as m(c) )m
I want to delete all backup files from a folder older than a specific date. But if I use the beklow query, I need to pass how many days of older backup files I need to delete whereas in my case, I dont know how many days/month/syears of old backup files are there in the backup folder.
Im trying to upload 1000 txt files into one table in SQL. I'm using the following query, to upload one txt file at a time:
bulk insert [dbo].AAA_2013_2015 from 'dataserverSQL Data FilesSQL_EMELIZFC x Bloque Detallada201308 Detalle FacturasFACT_BLOQ_AGO13 (4).txt' with (firstrow = 2, lastrow = ???, fieldterminator = ';', rowterminator = '0x0A')
I'm trying that the query skip the last row because gives me the following error:
Msg 4866, Level 16, State 1, Line 1 The bulk load failed. The column is too long in the data file for row 1, column 17. Verify that the field terminator and row terminator are specified correctly. Msg 7399, Level 16, State 1, Line 1 The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error. Msg 7330, Level 16, State 2, Line 1 Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".
know a command to skip the last row, something like lastrow= all-1...or something like that.
I also executed using MAXERRORS command...like this:
bulk insert [dbo].AAA_2013_2015 from 'dataserverSQL Data FilesSQL_EMELIZFC x Bloque Detallada201308 Detalle FacturasFACT_BLOQ_AGO13 (15).txt' with (firstrow = 2, fieldterminator = ';', MAXERRORS = max_errors, rowterminator = '0x0A')
does not recognize MAXERRORS command, also tried to put a number of error instead of max_errors.
I have two table 'Cal_date' and 'RPT_Invoice_Shipped'.Table cal_data has column month_no, start_date and end_date. And table RPT_Invoice_Shipped has columns Day_No, Date, Div_code, Total_Invoiced, Shipped_Value, Line_Shipped, Unit_Shipped, Transaction_Date.
I am using below insert statment to insert data in RPT_Invoice_Shipped table.
insert into [Global_Report_Staging].[dbo].[RPT_Invoice_Shipped] (Day_No, Date, Div_code, Total_Invoiced, Transaction_Date) select , CONVERT(DATE,Getdate()) as Date, LTRIM(RTRIM(div_Code)), sum(tot_Net_Amt) as Total_Invoiced, (dateadd(day, -1, convert(date, getdate()))) from [Global_Report_Staging].[dbo].[STG_Shipped_Invoiced] WHERE CONVERT(DATE,Created_date )=CONVERT(DATE,Getdate()) group by div_code
while inserting in column Day_No in RPT_Invoice_Shipped table, I have to use formula (Transaction_Date-start_date+1) where Transaction_Date from STG_Shipped_Invoiced and start_date from Cal_date table. I was using datepart (mm, Transaction_Date) so it gives month_no, and this month_no we can join with month_no of Cal_date table and fetch start_date from Cal_date table, so that we can use start_date for formula (Transaction_Date-start_date+1).
But I am getting difficulty to arrange this in above query. how to achieve this?
I am trying to run a UNION ALL query in SQL SERVER 2014 on multiple large CSV files - the result of which i want to get into a table in SQL Server. below is the query which works in MSAccess but not on SQL Server 2014:
SELECT * INTO tbl_ALLCOMBINED FROM OPENROWSET ( 'Microsoft.JET.OLEDB.4.0' , 'Text;Database=D:DownloadsCSV;HDR=YES', 'SELECT t.*, (substring(t.[week],3,4))*1 as iYEAR, ''SPAIN'' as [sCOUNTRY], ''EURO'' as [sCHAR],
[Code] ....
What i need is:
1] to create the resultant tbl_ALLCOMBINED table
2] transform this table using PIVOT command with following transformation as shown below:
PAGEFIELD: set on Level = 'Item' COLUMNFIELD: Sale_Week (showing 1 to 52 numbers for columns) ROWFIELD: sCOUNTRY, sCHAR, CATEGORY, MANUFACTURER, BRAND, DESCRIPTION, EAN (in this order) DATAFIELD: 'Sale Value with Innovation'
3] Can the transformed form show columnfields >255 columns i.e. if i want to show all KPI values in datafield?
P.S: the CSV's contain the same number of columns and datatype but the columns are >100, so i dont think it will be feasible to use a stored proc to create a table specifying that number of columns.
I have a column colC in a table myTable that has a value (e.g. '0X'). The position of a non-zero character in column colC refers to the ordinal position of another column in the table myTable (in the aforementioned example, colB).To get a column name (i.e., colA or colB) from table myTable, I can join ("ON cte.pos = cn.ORDINAL_POSITION") to INFORMATION_SCHEMA.COLUMNS for that table catalog, schema and name. But I want to show the value of what is in that column (e.g., 'ABC'), not just the name. Hoping for:
COLUMN_NAME Value ----------- ----- colB 123 colA XYZ
I've tried dynamic SQL to no success, probably not executing the concept correctly..Below is what I have:
I'm creating a sql stored procedure inside this proc it returns some information about the user, i.e location, logged in, last logged in, etc I need to join this on to the photos table and return the photo which has been set as the profile picture, if it hasn't been set then return the first top 1 if that makes sense?
The user has the option to upload photos so there might be no photos for a particular user, which I believe I can fix by using a left join
My photos table is constructed as follows:
CREATE TABLE [User].[User_Photos]( [Id] [bigint] IDENTITY(1,1) NOT NULL, [UserId] [bigint] NOT NULL, [PhotoId] [varchar](100) NOT NULL, [IsProfilePic] [bit] NULL,
[Code] ....
Currently as it stands the proc runs but it doesn't return a particular user because they have uploaded a photo so I need to some how tweak the above to return null if a photo isn't present which is where I'm stuck.
I've look at several different methods for removing leading zero's from a column but I need to remove trailing data from a VARCHAR column. For some reason, the old database saved the time along side the date in my client's app.
For example:
The old database format "2015-07-28 00:00:00"
I need the data in this column in the new database to only be the date "2015-07-28", there are alot of rows with this issue.
Is there a query I can run to remove the 00-00-00 from all of the rows? Some of the fields actually have a time in there like this: 2015-07-28 12:15:35, with this one, I don't think it's going to be easy but if I could at least remove the 00-00-00 from all the rows that have it, that would be a good start.
Every sunday, new data will be loaded from temptable to main table. I have to make sure that, duplicates does not get loaded from temptable to maintable.
For example, if last sunday a record gets loaded from temp to main. If this sunday also the same record is present then it means that is a duplicate.
The duplicate is decided on below scenario
select 'CodeChanges: ', count(*) from CodeChanges a, CodeChanges_Temp b where a.AccountNumber = b.AccountNumber and a.HexaNumber = b.HexaNumber and a.HexaEffDate = b.HexaEffDate and a.HexaId = b.HexaId and
[Code] ...
Yesterday (Sunday) , data from temp got loaded onto maintable but with duplicates.
There is a log which just displays number of duplicates.
Yesterday the log displayed 8 duplicates found. I need to find out the 8 duplicates which got loaded yesterday and delete it off from main table.
There is a column in both tables which is 'creation date and time'. Every Sunday when the load happens this column will have that day's date .
Now i need to find out what are all the duplicates which got loaded on this sunday.
The total rows in temp table is : 363 No of duplicates present is : 8
I used below query to find out the duplicates but it is returning all the 363 rows from the maintable instead of the 8 duplicates.
Select 'CodeChanges: ', * from CodeChanges a where exists ( Select 1 from CodeChanges_Temp b where a.HexaNumber = b.HexaNumber and a.HexaEffDate = b.HexaEffDate and
[Code] ...
Need finding the duplicate records which has creation date time as '2015-11-01 00:00:00.000' and all the above columns mentioned in the query matches.
I have a scenario where I need to add a blank column to a table that is a publisher. This table contains over 100 million records. What is the best way to add the column? In the past where I had to make an update, it breaks replication because the update would take forever as jobs are continuously updating the table so replication can't catch up.
If I alter a table and add a column, would this column automatically get picked up in replication?
I inherited a system which has an index on a set of columns which allow more than 900 bytes of data in it. We know one of the fields can be shortened to shrink the potential key size below 900 bytes.
The problem is the table is about 120m rows, and the index currently on that column is seeked (sought?) on about 2.5m times a day.
At its simplest, I want to drop the existing index, alter the column to shrink the varchar size, and then rebuild the index on the newly shortened column.
On a smaller, less used table, I might just do this in outside of business hours and call it a day, but I'm concerned that this will take a long time and block a lot of operations.
1) IIRC, shrinking a column, unlike widening it, is much more expensive, even if there are no values which would actually end up trunacted. Is this right?
2) I did a few tests on some other smaller (2+ m) row tables and was still able to select data out of the table. I don't think this covered all the read scenarios, but are there known scenarios which would simply not work during an index build?
3) I haven't yet tried DML operations to the table while it's doing either the column update or an index build. what scenarios would or would not be blocked?
I have several databases to deal with, all with + 250 tables. The databases are not identical and do not conform to a specific naming convention for table names. Most but not all tables have a column called "LastUpdated" containing a date/time (obviously). I'd like to be able to find all rows within a whole database (table by table) where the date/time is greater than a specified date/time.
I'm looking for a reliable query that will return all the rows in each of the tables but without me having to write hundreds of individual scripts "SELECT * FROM [dbo.xyz] WHERE LastUpdated > '2015-01-01 09:00:00:000'", or have to look through each table first to determine which of them has the LastUpdated field.
I have these two tables Log and CategoryLog, I need to archive records older than 13 months in these two tables to two separate tables and then delete the archived records from Log and CategoryLog tables. The problem is that only 'Log' table has a date column, the other table CategoryLog does not have any date column. But the two tables are connected by a column(LogID). How to archive the data and then delete the archive data from both tables.
Can we bulk insert only the desired column from a flat file to a table?
I am using SSIS to bulk insert from a file with more than 200 columns. I am trying to find a way I can bulk insert them to multiples table through SSIS.
The one way I can think is pre map the columns from the file to the destination tables. Build numerous Bulk Insert tasks to achieve that. But not sure if SSIS will let me do that.
I have run into a perplexing issue with how to UPDATE some rows in my table correctly.I have a Appointment table which has Appointment Times and a Appointment Names. However the Name is only showing on the Appt start Time line. I need it to show for its duration. So for example in my DDL Morning Appt only shows on at 8:00 I need it to show one each line until the next Appt Starts and so on. In this case Morning Appt should show at 8:00,8:15, 8:30.
A common partitioning scenario is when the partition column has the same value for every record in the partition, as opposed to a range of values. Am I the only person who wonders why there isn't an option to automatically partition a table based on the unique values of the partition column? Instead of defining a partition function with constants, you ought to be able to just give it the column and be done. This would be particularly valuable for tables partitioned on a weekly or monthly date; when new data is added it could simply create a new partition if one doesn't already exist.
I have tableX with columns colA, colB, colC, colD and there are 2256 rows in the tableX.
I would like to find out the percentages of colA, colB, colC, colD that hold data (where it is not an empty string or NULL value).
So out of 2256 rows in the table, the user has stored data in colA 1987 times, colB 2250 times, colC 2256 times and colD 17 times.
So the report would say:
colA: 88.07% colB: 99.73% colC: 100% colD: 0.01%
We have an application that has a bunch of fields that we believe are not being used and would like to remove them, but we need to prove this by looking at the data.
I know I could run a query, one at a time and change the column name, but this would take a long time as there are a lot of columns in this table. I am hoping there is some way to do this in one query.
I have a dynamic sql which uses Pivot and returns "technically" variable no. of columns.
Is there a way to store the dynamic sql's output in to a temp table? I don't want to create a temp table with the structure of the output and limit no. of columns hence changing the SP every time I get new Pivot column!!
I have around 100 XL Files in a folder ,i want to import all the files dynamically and load all the data in a single table in sql server 2008. Without using SSIS i want to query using openrowset.
The number of files to retain for SQL Server Logs is set to 99. When I expand the SQL Server Logs node in SQL Server Mgt Studio it shows the current log file through Archive#49. The oldest archive file is dated 2015/05/26. If I select that archive in SQL Server Mgt Studio it shows me the details and entries of that archive file. Yet when I go to the directory on SQL Server for the log files there are only the 5 most recent files. I have searched for '.trc' files on the entire drive and have found no other files.
How can SQL Server Mgt Studio show archive files that have no corresponding archive file in the directory that is supposed to contain the log files?
I am trying to locate the mdf,log and bak files but I am not seeing folder (MSSQL10_50.MSSQLSERVER) the only folder I see there are 90,100,110 and Report builder.
I located the properties of one of the databases below right clicking the properties on SSMS, but when I physically go there, I don't find that folder.
I am getting an error importing a csv file both using SSIS and SSMS. The csv is comma delimited with quotes for text qualifiers. The file gets partially loaded and then gives me an error stating The column delimiter for column "MyColumn" was not found. In SSIS it gives me the data row which is apparently causing the problem but when I look at the file in a text editor at the specific row identified the file has the comma delimiter and it looks fine. I am using SQL Server 2008.
I need to use SSIS to connect to an FTP server. From there I need to download files to a local folder. I need to download only today's files and also on those files starting with Training or Recruitment. I have managed to set up tasks that copy all but I am having such a hard time writing a script using C# that will download using the filters.
I am developing the SSIS and stuck on copying specific files.
1. We receive CSV file to our drive on a daily basis.
2. The csv file name has the last 8 digits formatted with the yyyymmdd. For example, the file name might be abcdef_20150226.csv This means it will be our CSV file for today, Thursday, February 26, 2015.
3. There are a lot of files in this directory.
[URL]
What we would like to do:
Add the constraints (or expression) that will copy the files from this directory to another directory that have the date equivalent to Monday only. For example, the file abcdef_20150226.csv will not be copied because it is Thursday file. But the abcdec_20150223 will be copied to a new Directory because it is Monday.
I have a client that has POS software called Restaurant Pro Express (RPE) from www.pcamerica.com Their old POS computer had a hardware failure, but I was able to attach the hard-drive to another computer and recover the data. RPE uses a MSSQL database system. However, my client doesn't seem to make backups very often - the last one is dated January 5, 2015.
I was able to copy the C:Program FilesMicrosoft SQL Server folder over which contained the instance as well as all the data files - and has up-to-date information. The instance in the recovered Microsoft SQL Server folder was called MSSQL.1. I installed the RPE software on their new computer, and it too now has an instance called MSSQL10_50.PCAMERICA. The new computer is using MSSQL 2008 R2, while I believe the old computer would have been using MSSQL 2005.
