Whenever I'm running query against the below database alone, it throws me the error.
use [AdventureWorks_2005]
SELECT * FROM dbo.sysFILES
OR
SELECT * FROM [AdventureWorks_2005].[sys].[SYSFILES]
Error- >
Msg 208, Level 16, State 1, Line 2
Invalid object name 'dbo.sysFILES'
How can we get most frequent queries that are running against to a table in our database?
View 3 Replies View RelatedI have databse called RM-A1 and a log of RM-A1.log
When i run this statement it errors.
select ceiling((size * 8192.0)/(1024.0 * 1024.0)),
case when status & 0x100000 = 0 then
convert(varchar,ceiling((growth * 8192)/(1024.0*1024.0)))
else convert (varchar, growth)
end + char(10)+char(13)
from RM-A1_log.dbo.sysfiles where fileid = '1'
--This works
select * from dbo.sysfiles
Im using a dynamic statement
set @cmd = N'select @ceil = ceiling((size * 8192.0)/(1024.0 * 1024.0)), @CNT = case when status & 0x100000 = 0 then
''MB '' + convert(varchar,ceiling((growth * 8192)/(1024.0*1024.0))) '
+ 'else ''PER '' + convert (varchar, growth) '
+ 'end' + char(10)+char(13)
+ 'from ' + @l_db_name + '.dbo.sysfiles where fileid = ''1'''
exec sp_executesql @cmd, @retType, @cnt OUTPUT, @ceil OUTPUT
I cannot determine why log name of '-' are erroring all other databases are working.
I'm taking a database(read-only) backup from one server and restoring it on other server. As soon as restore is done it is bringing database into single-user read-only mode.
why it is bringing the database into single user mode ?
Hi guys,Hope some of you SQL database experts out there can help me, 'cos at themoment I'm going mad!I want to use ACT! 2008 which uses MSSQL on 2 Laptops, (Vista & XP) one ismy own (Vista) and the other is a company laptop. I can't synchronse using anetwork connection between the two machines because the work laptop has allmanner of hidden firewalls etc. so this is not an option. I'm really pi**edoff that ACT! 2008 can only synchronise using a network connection. When Ibought ACT! 2008 I was told synchronisation is really simple. Can't use theInternet sync as this is only available with ACT! for Workgroups.I suddenly thought of the ideal solution; as I am the only user and I onlywant to use ACT! on 2 Laptops I simply save the Database onto a Memory Stickand use that on either Laptop - very simple, convenient and actually eveneasier than having to connect the two laptops to synchronise.You guessed it - bloody problems, I can copy the Database onto the memorystick and access it from the comuter that saved it.If I try to open it from the OTHER Laptop I get an error message that I amunable to open the database and to check my network connections, SQL Serveretc!!Help, I'm going mad, there must surely be a simple solution to allow me totransfer the Database backwards and forwards quickly between the twomachines using the memory stick?Thanks in advance,Best Regards,Charles
View 2 Replies View RelatedI've got a Derived Columns component as part of a data flow. On this I've set the error output for my columns to Redirect Row in all cases. I've set a data watcher on the error output and then ran the package.
There are several rows which I'm expecting to fail - about 3 of them. These fail but there are also another 697 which seem to have no problem. So I fixed one of the problem columns in the source data and then re-ran the package. I only updated one row in the source so this row no longer appeared in the error output, but neither did several hundred of the other rows.
Is it possible that the error output has been tripped for that one row but for some reason it sends several hundred more rows? The ids on these additional rows follow on from the erroneous row, and when I fix that row the rows following it no longer appear in the error output.
I have moved some DB's from a physical server to a virtual server while the physical server is being upgraded. This morning when I checked to make sure all the jobs are running fine I saw that a backup job failed for one of the databases. The error was :
[color=#ff0000]Executed as user: NT AUTHORITYSYSTEM. BACKUP 'database 1' detected an error on page (1:1400911) in file 'D:Datadatabase 1.mdf'. [SQLSTATE 42000] (Error 3043) BACKUP DATABASE is terminating abnormally. [SQLSTATE 42000] (Error 3013). The step failed.[/color]
Then I ran a DBCC check db command and found the following errors:
Msg 8928, Level 16, State 1, Line 1
Msg 8939, Level 16, State 98, Line 1
Msg 8976, Level 16, State 1, Line 1
Msg 8978, Level 16, State 1, Line 1
Msg 8939, Level 16, State 98, Line 1
Msg 8978, Level 16, State 1, Line 1
The messages varies from data from one page cannot be referenced on another, data page cannot be processed, page was not seen in the scan although the parent was etc etc.
I am getting following error when I try to create the 1st diagram for my existing database in SQL server management studio . I am using sql server 2008 express. Operating system is Vista basic home. I was able to get past the "no valid owner error" problem by using the ALTER PROCEDURE; now I have the following: Invalid column name 'uvalue'.Invalid column name 'uvalue'.Could not find stored procedure 'dbo.sp_upgraddiagrams'.Object is invalid. Extended properties are not permitted on 'dbo.sysdiagrams', or the object does not exist.Object is invalid. Extended properties are not permitted on 'dbo.sp_upgraddiagrams', or the object does not exist. (.Net SqlClient Data Provider)/
View 3 Replies View RelatedI have a SQL2008 database, running Standard Edition 64-bit, database owns by sa, connected to Management Studio using Windows Authentication mode. When I tried to generate scripts from a database, I got the following error messages:-
[Operation is not valid due to the current state of the object. (SqlManagerUI)]
which happened at one particular table. I have reviewed this table definitions are normal, and I could select data from it.
I couldn't find any information anywhere relating to this error messages, except that someone got it when they were trying to change the authentication mode or sa password.
Is it possible to assign to a variable, then add to it later on? When I run the below, all I get is 3 rows affected I never see the value printed. What i am wanting to do is each loop sum the numbers so 2+1+3 =6 so in the end @sumofallnumbers
= 6
Create Table #Test ( randarnumbers int )
Insert Into #Test Values ('2'), ('1'), ('3')
Declare @sumofallnumbers int, @nbr int
Declare c1 Cursor For
Select randarnumbers
FROM #Test
[code]..
When trying to open the log shipping status report, I get an error: user must be in the master database. The jobs appear to be running correctly.
View 0 Replies View RelatedIn my requirement,My production server running more then 5 jobs . I want details in running schedule in minutes. For example
1) First Job
I am configured every one hour.
2) Second job
Configured in every 30 min
3) Third job
Configured every 60 min
4) Fourth Job
Configured every 24 hrs
I want the result
SNOJOBNameRunning Schedule(in Min)
1First JOB 60min
2Second JOB 30 min
3Third JOB 60min
4Fourth JOB 1440min
i just kicked off a job that starts a data driven subscription that generates ~200 excel spreadsheets.
I kind of expected them to appear in the execution log, and that the TimeEnd would reflect when they complete.
instead, it appears that the TimeEnd is when the SQLcommand finished executing, ie, a few milliseconds after the start.
it does not reflect when the report finishes completing; if i run sp_whoisactive, i see a stack of reports at a time clawing their way through the process. (ie i see calls to [CreateChunkStatement] and all the other steps a report kicks off.
Other than watching execution requests, how can i know if anything is running as far as subscriptions go?
When I give job Id in filter of this query this will give job status of "Success" but actually my job is currently in executing stage. I want to get all jobs that are currently in executing status.
Use msdb
go
select distinct j.Name as "Job Name", --j.job_id,
case j.enabled
when 1 then 'Enable'
when 0 then 'Disable'
[Code] ....
I'm trying to call WinSCP in a SSIS Execute Process Task using a .bat file to automate. SSIS is returning a generic failure error message ("Error: 0xC0029151 at Execute Process Task, Execute Process Task: In Executing "MyServerC$Program Files (x86)WinSCPWinSCP.exe" "-script=MyNASShareWinSCPFTP.bat " at "", The process exit code was "1" while the expected was "0"."). So now I'm trying to run the .bat file by itself. Unfortunately, the command prompt rushes by so fast that I can't see what the server is doing.
I can't find anything on the WinSCP site that indicates how to slow down the .bat file processing or log the remote server responses. I do see how to use the /log switch when using the interactive command line console, but that's not what I want to do.
Without going to services.msc / configuration manager, is there anyway to know the service account through which SQL server is running?
View 6 Replies View RelatedI have a balance sheet report developed and working. What I need to do is add the ability to click (or double-click) on a number and have a separate report (drill-down) open with the detail that makes up that number. I've researched drill-through reports, sub reports, etc. but can't find a way to do what I want.
I'm now thinking that I need to add custom code in the report properties, code window to do this. I'm hoping that there is a VB method I can use to call this report and pass a parameter. Pseudo-code for this function would look something like this: RunReport("DrillDownReport", "Parameter").
This seems like it should be pretty easy but I don't know what the function is in VB for running an SSRS report (if there is one).
Is this possible or am I barking up the wrong code tree?
We are receiving following alerts frequently about 1:40 AM in the morning. We have backups running on 11:00 PM everyday and rebuild job running at 2:00 AM. Not sure the exact cause of this error.
Error:
The file group "PRIMARY" for the database "tempdb" in SQL instance "MSSQLSERVER" on computer "XYZ" is running out of space.
tempdev Initial size : 133,100 MB Growth: By 10 percent, Limited to 140000 MB
templog Initial Size : 5,475 MB Growth: By 10 percent, Unlimited
I have create a batch file to execute a stored proc to import data.
When I run it from the server (Remote Desktop) it works fine, but if I share the folder and try to run it from my pc, it doesn't do anything. I don't get an error, it just doesn't do anything. My windows user has admin rights in SQL. Why is it not executing from my PC?
I have a simple update statement (see example below) that when runs, I expect to see the number of records updated in the Results tab. This information shows up in the Messages tab; however, what is displayed in the Results tab is (No column name) 40. From where the 40 is being generated. I have tried restarting SSMS 2012, restarting my computer, turning NOCOUNT on and off.
"UPDATE TableA
SET Supervisor = 'A123'
WHERE PersonnelNumber = 'B456'"
Hi, I have the following error logged in SQL Server's error log whenever I run a query on a particular database :
2002-01-04 22:54:02.46 spid11 Error: 823, Severity: 24, State: 1 2002-01-04 22:54:02.46 spid11 I/O error 1117(The request could not be performed because of an I/O device error.) detected during read of BUF pointer = 0x14eac480, page ptr = 0x73c94000, pageid = (0x1:0x158c89), dbid = 8, status = 0x801, file = d:mssql7datamydb.mdf..
2002-01-05 05:54:22.01 kernel SQL Server terminating because of system shutdown. 2002-01-05 05:54:22.14 kernel LogEvent: Failed to report the current event. Operating system error = 31(A device attached to the system is not functioning.).
and get this error in the Results pane of Query analyzer : Server: Msg 823, Level 24, State 1, Line 1 I/O error 1117(The request could not be performed because of an I/O device error.) detected during read of BUF pointer = 0x14ace4c0, page ptr = 0x35df6000, pageid = (0x1:0x44b73), dbid = 14, status = 0x801, file = d:MSSQL7DATAmydb.mdf.
Connection Broken
select @@version returns, Microsoft SQL Server 7.00 - 7.00.961 (Intel X86) Oct 24 2000 18:39:12 Copyright (c) 1988-1998 Microsoft Corporation Standard Edition on Windows NT 5.0 (Build 2195: Service Pack 2)
Books Online Help on Error 823 indicates that it is a disk problem and suggests that DBCC checkdb needs to be run on the database. But, hardware diagnostics on the server do not report any disk problems and dbcc checkdb also returns no errors.
Help on the cause of error 823 would be greatly appreciated. Thank you, Praveena
When I run this query against PFGDSMRISSQLQ1 in Server manager 2005:use <database>INSERT INTO dbo.<table> (<column1>, <column2>, <column3>)VALUES (12598,2900,1.00)I get this error:Msg 8624, Level 16, State 1, Line 5Internal Query Processor Error: The query processor could not produce a query plan. For more information, contact Customer Support Services.Can someone please help. Thanks!
View 1 Replies View Relatedselect * from sysdatabases
give the information for all DB's, where as
select * from sysfiles
gives the information only for current DB.
Is there a system table which contain the information for all the files on a server? Or Do I need to use SP_MSFOREACHDB?
------------------------
I think, therefore I am - Rene Descartes
I am trying to copy database from one server to another using the Copy Database Wizard in SQL Server 2008 R2. The process fails in the last step. The error msg is not clear and it says there are more than two errors etc etc.
View 2 Replies View RelatedHi,
I have installed MS SQL Server 2005 and Service Pack 2 on a new Windows 32-bit environment. I also installed the 32-bit 10g client (the Administrator option). The tnsnames.ora file is configured properly and I can tnsping to the Oracle database without any issues. I have created a package in Visual Studio and it runs successfully when I execute the job manually. I saved the package to the MS SQL Server and when I log into Management Studio to create a job for this package, I receive the following error:
Message
Executed as user: xxxSYSTEM. ...rsion 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 10:42:37 AM Error: 2007-10-10 10:42:37.28 Code: 0xC0202009 Source: x Connection manager "x.x" Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80004005 Description: "Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation. Provider is unable to function until these components are installed.". End Error Error: 2007-10-10 10:42:37.28 Code: 0xC020801C Source: Data Flow Task OLE DB Source [18] Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method ca... The package execution fa... The step failed.
I have created the package and logged into the server with the same ID to set up the job. And I have set the ProtectionLevel property to "Don't Save Sensitive Data" since I know this has been an issue in the past when I tried automating the job. I've four posts regarding this error message on the MSDN forums that aren't helpful at this moment - I'm hoping that someone will have found a solution since those posts. Any suggestions are welcomed.
Thanks for your help!
Sue
I have 50 SQL2k MSDE servers with 250 databases.
Need to know the 250 databases size on daily bases.
It looks dbsize is not in server.master.sysdatabases,
but in individual sysfiles.
Any idea about how to retrieve the dbsize in a better way?
-David
Hi,
I am supposed to use 250 MB of space in SQL Server 2005 database
I was running out of space and thus deleted some rows from a table. To my surprise the db size increased. I then shrunk it to bring it back to what it was earlier.
When i deleted some 5000 rows, some space must have been released. Where did the space go and why did the db size increase after deleting the records?
I thought it might be log files..but my hosting provider tells me that db is set to Simple Recovery which does not utilize a Log File. So we cannot shrink it.
So i fired the command
'select * from sysfiles'
Results:
11251602880012820ASPNETDB_DAT_DATD:Program Files....dncASPNETDB.MDF
206312800128660ASPNETDB.MDF_logD:Program Files....dncASPNETDB_log.ldf
3025612800110486420dnc_log2D:Program Files....dncdnc_log2.ldf
What can I do now?thanks.
SQL Server 2008 r2 - 6 GB memory...I attempted a backup on a 500GB database but it was taking way too long. I checked the resources on the box and saw the CPU at 100%. I checked the SQL Server activity log and saw a hung query (user was not even logged on) that had multiple threads so I killed it and now the CPU utilization is back to normal.
Trouble is, now all of the threads in the activity monitor for the backup show 'suspended' and the backup appears to be not doing anything.
I succesfully did a MSSQL "file" restore of production to a different node yesterday. But failed to apply any transaction logs, it complained that one of the files have not been restored. On further investigation I found that one of the files are missing in sysfiles, but the file is in sysaltfiles.
This SQL statement does not return the same number files.
SELECT * FROM <DB>..sysfilesSELECT * FROM master..sysaltfiles WHERE dbid= DB_ID('<DB>')
sp_helpdb '<DB>' gives the same result as sysfiles.
Any idea on how to fix this ?
Thanks
Tiaan
Could someone explain how to convert this size to gigabytes? I look at it, and I can't figure out what size it is in. Maybe bits?
EXEC sp_MSForEachDB 'SELECT CONVERT(char(100), SERVERPROPERTY(''Servername'')) AS Server,
''?'' as DatabaseName,[?]..sysfiles.size, [?]..sysfiles.status, [?]..sysfiles.name, [?]..sysfiles.filename,convert(sysname,DatabasePropertyEx(''?'',''Status'')) as Status,
convert(sysname,DatabasePropertyEx(''?'',''Updateability'')) as Updateability,
convert(sysname,DatabasePropertyEx(''?'',''UserAccess'')) as User_Access,
convert(sysname,DatabasePropertyEx(''?'',''Recovery'')) as Recovery From [?]..sysfiles '
Any help is appreciated.
-Kyle
I receive the following error when trying to add a local database to my project.
"The data provider required to connect to the local data file could not found. The file will be added to the project but the typed DataSet associated with the file will not be generated."
I've reinstalled VS2k8, SQL Compact 3.1 and SQL Compact 3.5 on my machine and still receive the error.
Does anyone have any suggestions? I saw another similar thread about this in the VB2k8Express forum, but there were no helpful answers there. (for the curious: http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=2769854&SiteID=1)
I haven't used the SSCE before and so it's possible I've mistakenly omitted some required items.
Any help is greatly appreciated.
Hello!
I was wondering if I can install/run SQL 2008 and 2005 side by side with SQL 2005 being default instance. Any issues with that?
Thanks,
Igor
Hi,
Please Help, I am very desparate for a solution to this one.
I have an error appearing
"Error 25115 Wrong Page (potential database corruption). Try Running the Repair Utility."
I have SQL Server Enterprise set up with Merge replication, it is being used to Sync with Windows Mobile Devices as the subscribers.
All the Windows Mobile subscribers have been synchronising fine up until recently, when 1 of the Subscribing Windows Mobile devices received this error.
The day after, another device Synchronised fine the first time (note that the Synchronisation was a long one and the SDF grew in size dramatically while the synchronisation occured, but the Sync worked fine and the SDF dropped back to its initial size) The 2nd sync 5 mins later failed however so this Mobile device has the same error also.
Any suggestions as to the below are much appreciated
a) Why this error occurs?
b)How do you resolve this error?
c)What is the Repair utility mentioned in the error, and is it of use to me?
Thanks in advance, I am very greatful for any advice.