I have an SSIS job that dynamically loops through each server, grabbing data for typical DBA reporting, like diskspace, and errorlogs. If the server is down for whatever reason the SSIS package fails. Is there any way I can prevent the SSIS package from failing if one of the servers is down?
View 1 Replies
Hello all,
I currently started working on SSIS. Here is my first assignment; I am trying to get info from all servers. I was able to do it from one server, how can i extend this package so that my package touchs every server and get info from them.
Thanks
difference between FOR LOOP and FOREACH LOOP with example(if possible) in SSIS.
View 4 Replies View RelatedI have multiple xml data file in a directory say C:XMLData abc1.xml, abc2.xml, abc3.xml etc.
Need to loop through each file in ssis with Foreach loop container, and get the file name say abc1, and load the data of abc1.xml to abc1 table in sql server DB.
Next iteration will pick up the abc2.xml and find the abc2 table in sql server DB then insert the data in abc2 table.
While each iteration, xml source should also point each xsd file correspondingly.
 Tables are already created in DB
I solved my problem up to getting the file name from ech iteration and assigned file name to variable, in oledb destination data access mode I select Table or view name variable, then corresponding table will get selected for data insertation.
Just wanted to know how can I read each xsd file for each xml data files while iteration.Â
How do I create, say an "update statistic" maintenace package that works on multiple servers and databases?
For example, how do I get the package to operate on the following servers and tables:
ServerA, tableX, tableY, tableZ
ServerB, tableM, tableN
Also, I would like to save the package configuration and store it on SQL Server. So if I want to add more servers or tables to the list, the SSIS package will pick it up at run time.
Is this possible?
I am getting the following error when trying to load multiple excel files using for each loop container in SSIS, I tried to put the quotes in several different ways but still can't get rid of this error. I was able to successfully load single excel file, but when I use the for each loop container that's when I am having problems. Any help is greatly appreciated. Thx.
TITLE: Package Validation Error
------------------------------
Package Validation Error
------------------------------
ADDITIONAL INFORMATION:
Error at Package1 [Connection manager "SourceConnectionExcel"]: The connection string components cannot contain unquoted semicolons. If the value must contain a semicolon, enclose the entire value in quotes. This error occurs when values in the connection string contain unquoted semicolons, such as the InitialCatalog property.
Error at Package1: The result of the expression ""Provider=Microsoft.Jet.OLEDB.4.0;Data Source=" + @[User::Folder] + @[User::file] + ";Extended Properties="Excel 8.0;HDR=NO";"
" on property "ExcelFilePath" cannot be written to the property. The expression was evaluated, but cannot be set on the property.
(Microsoft.DataTransformationServices.VsIntegration)
------------------------------
BUTTONS:
OK
------------------------------
I'm looking for a way of taking a query which returns a set of date time fields (probable maximum of 20 rows) and looping through each value to see if it exists in a separate table.
E.g.
Query 1
Select ID, Person, ProposedEvent, DayField, TimeField
from MyOptions
where person = 'me'
Table
Select Person, ExistingEvent, DayField, TimeField
from MyTimetable
where person ='me'
Loop through Query 1 and if it finds ANY matching Dayfield AND Timefield in Query/Table 2, return the ProposedEvent (just as a message, the loop could stop there), if no match a message saying all is fine can proceed to process form blah blah.
I'm essentially wanting somebody to select a bunch of events in a form, query 1 then finds all the days and times those events happen and check that none of them exist in the MyTimetable table.
Can I safely use top n select/delete in a while loop? For example:
declare @FieldVal int
while (select count(*) from @MyTempTable) > 0
begin
select top 1 @FieldVal = FieldVal from @MyTempTable
-- process @FieldVal then delete the row
delete top 1 from @MyTempTable
end
I like the simplicity of the above approach as long as it's reliable and there aren't any gotchas that I may not be aware of.
I have a problem where I want to create a loop in my script to insert 0's into my table.
I have a temp table with a list of company codes.
SELECT CODE FROM ##SENData GROUP BY CODE
This produces the following;
CODE
00C
00D
00K
00M
00Q
00T
00V
00X (there are 110 of these codes)
I want to insert data into a different table in the following format.
+------+------------+-------+---------+
| CODE | Month | Value | Measure |
+------+------------+-------+---------+
| 00C | 01/09/2015 | 0 | HAR-01 |
| 00D | 01/09/2015 | 0 | HAR-01 |
| 00K | 01/09/2015 | 0 | HAR-01 |
| 00M | 01/09/2015 | 0 | HAR-01 |
| 00Q | 01/09/2015 | 0 | HAR-01 |
| 00T | 01/09/2015 | 0 | HAR-01 |
| 00V | 01/09/2015 | 0 | HAR-01 |
| 00X | 01/09/2015 | 0 | HAR-01 |
+------+------------+-------+---------+
The month will be set from a declared variable and the others will just be hard coded.
If exists (select fieldID from #tmploginfo where status <> 0
group by fieldID
having count(*) > 0)
begin
backup log rdb to disk = N'C:
db1.trn'
End
I want to iterate this query using a loop as many as 5 times max.
WHILE (@MyLoop3 > 0)
BEGIN
SELECT Top 1 @UploadId = UploadId,@FirstName = (CASE WHEN FirstName = '' THEN @Update ELSE FirstName END),
@LastName = (CASE WHEN LastName = '' THEN @Update ELSE LastName END),
@Claim = (CASE WHEN Claim = '' THEN @Update ELSE Claim END),
@Insurer = (CASE WHEN Insurer = '' THEN @Update ELSE Insurer END),
@InsurerBranch = (CASE WHEN InsurerBranch = '' THEN @Update ELSE InsurerBranch END),
[Code] .....
I've been put in a situation where I have a number of SQL DB's running on 2005/2008 which I have responsibility for. I've been given limited information so am looking at a starting point to determine where I go from here.
I have of course ensured there is a backup strategy in place to secure the data.
I have to set up log shipping from Prod server "A" to 2 different DR servers ("B" and "C")...What do i have to do differently (or additional) using the GUI (ie not using Tsql Scripts) to accomplish this, in addition to the steps that are done to log ship to just one DR server?
View 0 Replies View Relatedi have 70 SQL database servers and i setup DB Mail on the 70 Servers, i want to know is there a way to find the status of all the jobs which i assigned the DB Mail and if its working/failing... is there a script i can run on powershell or SQL to find out that information
View 1 Replies View RelatedBelow is the syntax I am using for creating Linked server from SQL Server i.e windows 2008 R2 standard to Postresql database running on Linux 32 bit Debian (Linux turtle 3.2.0-4-686-pae #1 SMP Debian 3.2.46-1+deb7u1 i686 GNU/Linux) and the version of Postresql is 8.3
/****** Object: LinkedServer [HGCDEV] Script Date: 09/15/2015 17:03:37 ******/
EXEC master.dbo.sp_addlinkedserver @server = N'HGCDEV', @srvproduct=N'', @provider=N'MSDASQL', @datasrc=N'172.16.20.159',@provstr=N'UID=web;PWD=dev123'
/* For security reasons the linked server remote logins password is changed with ######## */
EXEC master.dbo.sp_addlinkedsrvlogin @rmtsrvname=N'HGCDEV',@useself=N'False',@locallogin=NULL,@rmtuser='web',@rmtpassword='dev123'
This the error I am getting " Cannot initializee the data source object of OLE DB provider "MSDASQL" for linked server "HGCDEV".
How to setup the linked server........... Below are the drivers installed on the SQL server
PostgreSQL35W
PostgreSQL30
I have three tables:
"PaymentsLog"
"DatePeriod"
"PaidOrders"
As per below
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[PaymentsLog](
[Code] ....
Is there a way to look at the DatePeriod table and use the StartDtae and EndDate as the periods to be used in the select statement and then cursor through each date between these two dates and then insert the data in to the PaymentsLog table?
I need to update multiple columns in a table with multiple condition.
For example, this is my Query
update Table1
set weight= d.weight,
stateweight=d.stateweight,
overallweight=d.overallweight
from
(select * from table2)d
where table1.state=d.state and
table1.month=d.month and
table1.year=d.year
If table matches all the three column (State,month,year), it should update only weight column and if it matches(state ,year) it should update only the stateweight column and if it matches(year) it should update only the overallweight column
I can't write an update query for each condition separately because its a huge select
I want to enumerate all *.xls and *.csv file. How to fill the Files box? I tried
*.xls, *.csv
*.xls *.csv
*.(xls|cvs)
all doesn't work
I have the default trace on a SQL Server 2008R2 instance enabled and found today that there is a gap of nearly 4 minutes in the trace during a time of the day when there most certainly is not going to be a 4 minute window of nothing.
What if anything could cause the default trace to have a gap like this? The SQL Server Instance (against my preferences) is hosted on VMware however it has its on HOST and so its resources are not being shared with any other server. The data & log files reside on different parts of the SANS. Our IT & Network admins are looking into the issue on their end but when I looked and found a near 4 minute gap in the default trace it hit me that this could be something above/outside of SQL Server.
Is there anyway,can we find the list of servers by querying at active directory?
View 3 Replies View Relatedhow best to approach a problem involving two tables across two different servers.
Table 1: Contains IP Address along with assessment findings. Lets say the fields are IPADDRESSSTR, FINDING
Table 2: Contains Subnet information stored in integer format. The fields are SITE_ID, LOW, and HIGH
What I'd like to do is load the IP range information into memory and then return the findings from table 1 where the IPADDRESSSTR is between the LOW and HIGH integer value.
1) Is there a way to load all of the ranges from table 2 into an array and then compare all the IP addresses (IPADDRESSSTR) from table 1?
2) How do I convert IPADDRESSSTR (a string) to an integer to perform the comparison.
How do I connect DB's on different servers? I can't find a good explanation that works for me.
View 1 Replies View RelatedI have a backup checking script on my server. I want to change the script to run on multiple servers, and below are my requirements,
1. I have an input file with my sql script which i want to run in command prompt and i have a list of servers in an another input file.
2. I need a script to take the input from the input file , process my sql script and produce an output for each servers.
3. Or can we use SSMS or some sql agent script to make it possible ?
Greetings.
I have a setup/deployment question regarding SQL Server Encryption.
Internal database encrypts data in 3 different tables. This could execute on any one of 6 different servers.
The tables with encrypted data are replicated to another database on different servers (3)
How should the keys/certificates be created so that the data in the replicated database can be decrypted?
In my test scenario so far, I have been unable to have the second database decrypt the data that was encrypted on the first database (currently on the same server).
-- Create Database Master Key
CREATE MASTER KEY ENCRYPTION BY
PASSWORD = 'p@ssw0rd'
GO
-- Create Certificate
CREATE CERTIFICATE MyCertificate
WITH SUBJECT = 'My Data Encryption Certificate',
EXPIRY_DATE = '10/31/2010';
GO
CREATE SYMMETRIC KEY MyKey
WITH
ALGORITHM = AES_256,
IDENTITY_VALUE = 'My Symmetric Key',
KEY_SOURCE = 'Unique phrase that will be used to secure the key'
ENCRYPTION BY CERTIFICATE MyCertificate;
GO
We have been using SQL Server 2005 for our applications for some time now and had a question regarding SSIS.
What is the strategy to adopt if we want to have the SQL Server DB installed on one server and SSIS and Reporting Services running on another machine.
When we tried to actually do it, we ran into this problem. We had a package which was scheduled as a job on one of our database servers, A and loaded data into A from a sybase database. This job was working fine.
When we modified the package to load into another database server B, and scheduled the package as a job again on the SQL Agent on A, the package fails. The SQL Agent logs simply say €˜The package execution failed.€™
On enabling logging for the package, the Event logs on the A say €˜Failed to acquire connection €˜ServerB.sy_nawork.SQLuser1€™. Connection may not be configured correctly or you may not have the right permissions on this connection.€™ The SQL Server log on B logs a €˜Login failed€™ for user SQLuser1.
Why might this be happening?
I believe details of all connection managers used in a package are stored in the package itself. Is that correct.
For this particular package, we are using a connection manager which connects to the database B using SQL Server authentication - user SQLuser1 and the corresponding password. We are sure that the credentials supplied are correct.
Would appreciate pointers to resolve this issue.
I can easily query multiple servers using the multi-server query function in Central Management Server and write some of the results to logging tables. I would like to be able to do this via a scheduled job. So far I am finding that even setting up Master/Target Servers this may not work and the only workaround is either using SSIS, SQLCMD (by basically hard coding the servername) and possibly Powershell.
tell me if they have been successful just using standard jobs and querying against multiple servers?
If I can't save the results to a 'central' database/table (I can do this when in SSMS), but can still query against multiple servers I was thinking I could write the results to a CSV file that a SSIS job picks up.
I have attempted using SSIS to iterate through servers and have been plagued with intermittent connection issues when using a For...Loop container.
Hi,
I'm trying to create a database that takes specific information from a number of databases on different servers to make some reporting that we have much easier.
I'm pretty new to SQL so I'm not sure of the best way to proceed. I read an article that suggested I use the OPENROWSET command. The problem is, the version of SQL that came with one of the programmes we use is limited and will not allow you to turn on the allow "Ad Hoc distributed Queries" so the SLQ statement will not execute.
I'm confused why it won't let me to connect through ODBC as I've created a web page that selects data from this database with no problems!
Here is the SQL statement that I've written to make sure it is the correct one (on the msdn library page it said that this was the ODBC connection):
SELECT a.*
FROM OPENROWSET('MSDASQL','DRIVER=(SQL Server);SERVER=APPOLOACT7;UID=sa;PWD=***************',
'SELECT * FROM MDCTestAndDev.dbo.TBL_CONTACT') AS a
I've also created the ODBC connection using the tool on Administration Tools>Data Sources ODBC
Any help would be greatly appreciated (also any ways of selecting from one database and inserting it into another will be helpfull)
Thanks
I'm trying to execute my package using schedule in SQL Server Agent, I've already tested my package by run it manually in Integration services and it works. The table created, the data from my flat file also inserted into the table correctly and the result return with success.
The question is why when I execute my package using SQL Server Agent, the SQL Server Agent keep executing my package like infinite loop until I stop the job. after I stop the job there is no error generated by sql server. Could you figured why this happen?? I've already tried to upgrade into SP2 and set the package protection level and still not get good result from it. thank you.
I have a table of customer sales (dbo].[CustomerSales] which has a complete record od sales of our products for the past 5 years. I would like to create a report that extracts all the sales per customer on one row ie [CustomerID] 00011 has had 25 sales in the past 5 years and I would like to have their sales from left to right (starting with their earliest sale date at the beginning [SaleDate] field on the one row. I would also like to include the store location field [Location] along with the date the sale took place. So in other words the extract would look something like:
[CustomerID], [SaleDate], [Location], [SaleDate], [Location], [SaleDate], [Location], [SaleDate], [Location], [SaleDate], [Location], etc etc
Obviously some customers will have had less sales than others in which case I’m assuming these fields would just contain NULL values.
how to use like operator select statement to retrieve multiple column names in sql server DB...for ex: I have a table say employees where in I want to get all column names like emp_,acc_ etc using '%' And what is this below query used for?
SELECT column_name as 'Column Name', data_type as 'Data Type',
character_maximum_length as 'Max Length'
FROM information_schema.columns
WHERE table_name = 'tblUsers'
we are queirying an stored procedure multiple times same time,from our application. In this case, few processes executing successfully and few getting failed with error "50000 error executing the stored procedure" and if we run thesame process again its getting executed sucessfully.Does the MySQL cannot handle multiple threads same time?
View 9 Replies View RelatedCurrently I have a table that looks like the one below and I need to concatenate the description column and keep the rest of the row the same.
current:
IDSeq Desc DateOpen DateClose
1 AA description 1 1/1/2015 12/31/2015
1 AB description 2 1/1/2015 12/31/2015
Desired outcome:
ID Desc DateOpen DateClose
1 description 1,description 2 1/1/2015 12/31/2015
I need the requirements of merging multiple rows of same ID as single row.
My Table Data:
IDLanguage1Language2Language3Language4
1001NULL JAPANESENULL NULL
1001SPANISH NULL NULL NULL
1001NULL NULL NULL ENGLISH
1001NULL NULL RUSSIAN NULL
Required Output Should be,
IDLanguage1Language2Language3Language4
1001SPANISH JAPANESERUSSIAN ENGLISH
How to achieve this output. Tried grouping but its not working also producing the same result.