SQL Server 2008 :: Specific Type Of Join For 3 Tables
Jul 3, 2015
I have 3 tables as per following:
orddet
OrderProductQtyOrd
1 Item1 20
2 Item1 10
3 Item2 10
4 Item1 5
4 Item2 5
ordhead
OrderDate
110/06/2015
205/07/2015
307/06/2015
415/08/2015
product
ProductdescMinQty
Item1This is 110
Item2This is 220
I want to pull only the 1 line for minqty for an item as follows
OrderProductQtyOrddate minqty
1 Item1 20 10/06/2015 10
2 Item1 10 05/07/2015
3 Item2 10 07/06/2015 20
4 Item1 5 15/08/2015
4 Item2 5 15/08/2015
View 2 Replies
ADVERTISEMENT
Jul 15, 2015
I have two queries from two different tables ex ABC and BCD. For table ABC, according to my query, I got 11 records ; for table BCD I only got 9 records.
Bottom line: I would like to see only 11 records from Table ABC including certain data from table BCD after I joined this two tables.
However, no matter what I did I always got 99 records when I joined.
View 3 Replies
View Related
Feb 6, 2015
I have a table of "applicants" with unique applicant id and another table "reviews" with reviews which has unique id and Emplid and contains general program name like Math and then may contain 3 addition rows for specific program like Calculus, algebra, geometry etc.
There may or may not be a record for each applicant id in table reviews or there can be 1 or more than one record in reviews based on level of review( General or Specific).
All the general reviews has “Math” as Program_code but if there are more reviews, they can have Program_code like “Cal” , “Abr”, “Geo”
I want to join the tables so I can get all the records from both the tables where Program_code in reviews table is “Math” only.
That is I want to join the table and get all the records from reviews table where the program_code is “Math” only
How can I do that?
View 6 Replies
View Related
Oct 6, 2015
I have documentation in the form of extended properties for tables which are subscribers in a replication scheme. The documentation describes the tables in reference to their replication scheme. I don't want to apply them to the source and have them published.I can't apply the extended properties receiving the error, 'don't have permission' yet I am DB creator on all systems. The theory is that I can't modify the subscription. Which makes sense.Can I turn off the replication, apply the extended properties, then turn on replication without causing harm?
View 0 Replies
View Related
Jan 29, 2015
I am new in SQL and i need do a query where I need sum values from 2 tables, when i do it the Sum values are not correct. this is my query
SELECT D.Line AS Line, D.ProductionLine AS ProductionLine, D.Shift AS Shift, SUM(CAST(D.DownTime AS INT)) AS DownTime,
R.Category, SUM(Cast(R.Downtime AS INT)) AS AssignedDowntime,
CONVERT(VARCHAR(10), D.DatePacked,101) AS DatePacked
FROM Production.DownTimeReason R
left JOIN Production.DownTimeHistory D
[Code] .....
View 3 Replies
View Related
Jun 20, 2015
Refer to my query thread on msdn SQL site, how I can achieve the result.
[URL] .....
View 0 Replies
View Related
Jun 30, 2015
We have a "main" SQL 2014 server who imports XML files using SSIS in a datacenter. In remote sites (which are warehouses), there is an instance of SQL 2014 Express. A merge replication is setup, as every operations done on each site must be "forwared" to the main database, as some XML files are generated as output for an ERP system.
Now, the merge replication replicate all the data to the server on each sites. But a specific site don't need the data of every other sites, only the data relevant to itself (which is the warehouse code). Is there a way to replicate only the data relevant to each individual sites to the subscribers? Or is there a better way than replication to accomplish this?
View 2 Replies
View Related
Jun 3, 2015
SQL 2008 R2
I have a partitioned table in which one of the partitions is on the Primary filegroup. I want to move the data off of that Primary filegroup, and and on to a new filegroup named RTFG6.
Scheme and function currently defined as:
CREATE PARTITION SCHEME [PS1_Left_id] AS PARTITION [PF1_Left_id] TO ([RTFG1], [RTFG2], [RTFG3], [RTFG4], [RTFG5], [PRIMARY])
CREATE PARTITION FUNCTION [PF1_Left_id](int) AS RANGE LEFT FOR VALUES (10, 15, 35, 48, 53)
I've tried split and merge, and for whatever reason, always end up with the Primary filegroup holding data.
How do i get it off of Primary completely, and onto RTFG1 to RTFG6?
I don't want to export to a holding table and re-create the table if i can avoid it, due to identity columns and relationships with multiple tables.
View 0 Replies
View Related
Feb 26, 2015
I am developing the SSIS and stuck on copying specific files.
1. We receive CSV file to our drive on a daily basis.
2. The csv file name has the last 8 digits formatted with the yyyymmdd. For example, the file name might be abcdef_20150226.csv This means it will be our CSV file for today, Thursday, February 26, 2015.
3. There are a lot of files in this directory.
[URL]
What we would like to do:
Add the constraints (or expression) that will copy the files from this directory to another directory that have the date equivalent to Monday only. For example, the file abcdef_20150226.csv will not be copied because it is Thursday file. But the abcdec_20150223 will be copied to a new Directory because it is Monday.
View 1 Replies
View Related
May 18, 2015
I have a ssis package which runs daily. This ssis package has couple of execute sql tasks which load data for yesterday's transaction. Ex.
INSERT INTO Shipped (Div_Code, shipment_value, ship_l_id, shipped_qty, shipped_date, whse_code,
ord_id, ship_id, ship_l_ord_l_id, Created_date) select ord.DIV_CODE as div_code, ship.SHIPMENT_VALUE as shipment_value, ship_l.SHIP_L_ID as ship_l_id, ship_l.SHIPPED_QTY as shipped_qty, ship.SHIPPED_DATE as shipped_date, ship.WHSE_CODE as whse_code, ord.ORD_ID as ord_id, ship.SHIP_ID as ship_id, ship_l.ord_l_id as ship_l_ord_l_id, Getdate() as Created_date from SHIP ship, ORD ord, SHIP_L ship_l where ship.SHIPPED_DATE=(dateadd(day, -1, CONVERT(VARCHAR(10),GETDATE(),120))) and ship.WHSE_CODE='WPP' and ord.ORD_ID=ship.ORD_ID and ship.SHIP_ID=ship_l.SHIP_ID
All execute sql task has query like above query. and in some query we have date filter which loads data for yesterday. Ex. one query has ship.SHIPPED_DATE=(dateadd(day, -1, CONVERT(VARCHAR(10),GETDATE(),120))). some other query has ord.trans_date=(dateadd(day, -1, CONVERT(VARCHAR(10),GETDATE(),120))). this package runs daily through sql server job, so It loads data for yesterday. Now If i want to run for any particular date, How could we achieve from ssis?
View 3 Replies
View Related
May 31, 2015
I have a ssis package, which runs on date parameter. If we dont specify the date it always load data for yesterday's date. And if we give any specific date like '2015-05-10', It should load for that date. How can we achieve this dynamically (using package configuration)? Once we load for any specific date, package should be set for yesterday's date dynamically. How to achieve this as I am new to SSIS.
View 2 Replies
View Related
Jul 13, 2015
I would like to know about the DML process (Insert/update /delete) in a particular table .. it is like change tracking but I also want to know the modification date
I know CDC ( Change data capture ) but unfortunately it needs SQL 2008 developer/enterprise edition and my SQL server is SQL 2008 STANDARD edition.
View 5 Replies
View Related
Feb 19, 2015
I know very little about Extended Events, but I know it is supposed to be more powerful than Profiler. The SQL Instance involved is 2008R2. I was asked whether we could capture when a stored proc was called with a certain parameter. So for example, if dbo.usp_mystoredproc is called and is passed a value of '12345a' for @customer, can that be captured? I would want to know the time it was called, the parameter and parameter value. Probably would be interested in the SPID or LoginName as well.
View 4 Replies
View Related
Oct 22, 2015
Here's what my table looks like;
UniqID | Code |
1 | ABC
1 | 123
2 | ABC
3 | ABC
4 | ABC
4 | ABC
I only want to UniqIds that only have the CODE of ABC... and if it contains ANYTHING other than ABC then It doesnt return that UniqID... Now keep in mind there's multiple different codes.. I'm just looking for a bit of code that drops any ID's that don't have my criteria.
View 9 Replies
View Related
Jun 10, 2015
We have a database in SQL Server 2008 R2 with mirroring and want that replication is done by dedicated network.We stop the endpoint and when we try to run the following command, syntax error occurred:
Msg 102, Level 15, State 1, Line 1
Incorrect syntax near '192.168.1.14'.
What is the correct syntax of the command line below?
ALTER ENDPOINT Endpoint_Mirroring AS TCP (LISTENER_IP = '192.168.1.14')
View 2 Replies
View Related
Jul 29, 2015
I want to delete all backup files from a folder older than a specific date. But if I use the beklow query, I need to pass how many days of older backup files I need to delete whereas in my case, I dont know how many days/month/syears of old backup files are there in the backup folder.
EXEC xp_cmdshell 'FORFILES /p c:BACKUP /s /m *.sql /d -30 /c "CMD /C del /Q /F @FILE"'
View 2 Replies
View Related
Feb 1, 2015
i need result from '(1000/3)+(15/100)'. try exec() by failed.
View 5 Replies
View Related
Feb 23, 2015
Below is a SQL statement that shows what columns belong to a certain view. My next question is how can I get a third column that shows the column type ?
VARCHAR(100), or UNIQUEIDENTIFIER or INTEGER or TEXT or NVARCHAR(256) or ........????
select top 100 a.name, b.name, from sys.views a inner join sys.columns b
on a.object_id = b.object_id where a.name like '%Case_Times%'
View 4 Replies
View Related
Feb 27, 2015
In my database there is a big table and format is something like this:
CREATE TABLE [dbo].[MyTable](
[aaa] [uniqueidentifier] NULL,
[bbb] [uniqueidentifier] NULL,
[ccc] [nvarchar](max) NULL,
[ddd] [nvarchar](100) NULL,.......etc.........
There are some more columns with more 'nvarchar' (max) and other INT data types. Anyway, I know a page is 8K size. How do I find out how much space does A ROW takes with above datatypes? If users add 5000 Rows per day, how do I figure out how much size the table will increase?
View 9 Replies
View Related
Feb 5, 2015
I'm trying to store the output of my stored procedure into a temp table, which takes Table Type as Input.
CREATE TYPE [dbo].[Employee] AS TABLE(
[Field] [varchar](50) NULL,
[Criteria] [varchar](50) NULL,
[Value] [varchar](50) NULL
)
declare @Employee dbo.Employee
insert into @Employee values(N'Salary',N'is greater than',N'3520')
DECLARE @sql NVARCHAR(MAX)
SET @sql = 'SELECT * FROM OPENROWSET(''SQLNCLI'',''Server=localhost;Trusted_Connection=yes;'',''EXEC dbo.uspGetEmployee ' + @Employee + ')'
I need to create a stored procedure which uses output of the above stored procedure. Hence, I don't want to put declare and insert into OPENROWSET as I get those values as parameter to the new procedure.
Any other solution instead of using OpenRowSet.
View 5 Replies
View Related
Jul 24, 2015
Is there a good way to add columns to a table type?
I built several procs which make use of table-valued-parameters, and they work pretty nicely, until I need them to accept additional columns. Then I have to drop all the procs that use them, alter the types, and rebuild all the procedures, which is a huge pain in the rear.
Is there any good way (built in, or custom) to alter the def of a table type that's used as a parameter to multiple stored procedures?
View 9 Replies
View Related
Aug 10, 2015
I'm using the SQL below to work out recruitment figures. The query works well, but I now need to build this query into a DotNet application as a webpage. I therefore need to declare and manipulate the values such as 'Total', 'Jan' to 'Dec' and 'YearRecruited' in order to write these values into my chosen data control. I therefore need to know the datatypes of these calculated values.
Total I think is straightforward as DNAScreeningID is an int datatype. But what about the others?
SELECT YEAR(SamplingDate) AS YearRecruited,
COUNT(CASE WHEN month(SamplingDate) = 1 THEN DNAScreeningID END) AS 'Jan',
COUNT(CASE WHEN month(SamplingDate) = 2 THEN DNAScreeningID END) AS 'Feb',
COUNT(CASE WHEN month(SamplingDate) = 3 THEN DNAScreeningID END) AS 'Mar',
COUNT(CASE WHEN month(SamplingDate) = 4 THEN DNAScreeningID END) AS 'Apr',
[Code] ....
View 5 Replies
View Related
Oct 7, 2015
I've never worked with the XML data type in SQL Server, although I know its been there for a few iterations of SQL SErver. Now I've got a situation in which it might store some configuration data as XML, since that's the way it comes. (We had thought about storing the data in a VARCHAR(MAX) field.)
The first question is does the XML data type have a size limitation? For example do you do something like:
ConfigFile XML(1000) NULL
Or is it just something like this:
ConfigFile XML NULL
The second question is persisting the data to a file. As the name I choose for the variable suggests, we want to save the data from a configuration file into a SQL Server database. How do we go about doing that? We'll be developing a C# application, it will read and write the data both from the SQL table and the user's local HD.
View 5 Replies
View Related
Oct 15, 2015
Should data type money allow nulls? Are there valid arguments both pro and con?
Yes, there is the age-old question regarding how one might interpret a NULL found in any column - does it mean the amount is not known or that the amount is zero (in the case of a numeric type)? You get the drift...
Other than that, though - are there any practical considerations an old data hound ought to be aware of?
View 7 Replies
View Related
Mar 23, 2015
I have Two tables @master and @child
Master Table :
MasterID EntryNumber BranchId IsstockIn
1 1 1 1
2 1 1 0
Child Table:
CEntryNumber CBranchID EntryQty
1 1 10
1 1 20
1 1 -5
1 1 -4
My Query:
Select SEC.EntryQty from Item.StockEntryChild SEC
where SEC.CEntryNo =
(
select SEM.EntryNumber from item.StockEntryMaster SEM
where SEC.CBranchID=SEM.BranchID and SEC.CEntryNo=SEM.EntryNumber and SEM.MasterID=1 and SEM.isStockIn=1
)
My Result:
EntryQty
10
20
-5
-4
Expected Result:
10
20
View 6 Replies
View Related
Jul 13, 2015
I am looking for a query where in I can have a conditional statement within inner join after ON statement as shown below.
Declare @roleid int
select @roleid = roleid from Role where Name ='Admin'
select empid,empName,deptName from employee em
inner department dm on CASE when @roleid>0 then 1=dm.RoleId else em.RoleId=dm.RoleId end
View 1 Replies
View Related
Apr 28, 2015
SELECT
P.Publication
,P.Publication_type
,S.Subscriber_ID
,S.Update_Mode
FROM MSPublications P
INNER JOIN MSSubscriptions S
ON P.Publication_ID = S.Publication_ID
give me publication_type=0. So it is transactional replication but how do we know that is pull or push?
View 2 Replies
View Related
Oct 12, 2015
I am having an issue fetching Chinese characters in a XML data type. It return questions mark (?).
Below is the sample script.
DECLARE @XMLVAR XML
SET @XMLVAR = '<?xml version="1.0"?>
<POLICY_SEARCH xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<NAME>QA*保险1</NAME><NUMBER /></POLICY_SEARCH>'
SELECTI.xmlParam.query('./NAME').value('.','NVARCHAR(25)') NAME
,I.xmlParam.query('./NUMBER').value('.','NVARCHAR(25)') NUMBER
FROM@XMLVAR.nodes('POLICY_SEARCH') AS I(xmlParam)
View 1 Replies
View Related
Oct 29, 2015
This is the scenario in my environment
WaitType Wait_Sec Resource_Sec Signal_Sec Wait Count Wait Percentage
WRITELOG920039.89887485.89 32554.00 23446032975.02
View 9 Replies
View Related
Jan 25, 2011
I have a XML data passed on to the stored proc in the following format, and within the stored proc I am accessing the data of xml using the nodes() method
Here is an example of what i am doing
DECLARE @Participants XML
SET @Participants = '<ArrayOfEmployees xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<Employees EmpID="1" EmpName="abcd" />
<Employees EmpID="2" EmpName="efgh" />
</ArrayOfEmployees >'
SELECT Participants.Node.value('@EmpID', 'INT') AS EmployeeID,
Participants.Node.value('@EmpName', 'VARCHAR(50)') AS EmployeeName
FROM
@Participants.nodes('/ArrayOfEmployees /Employees ') Participants (Node)
the above query produces the following result
EmployeeID EmployeeName
--------------- -----------
1 abcd
2 efgh
How do I join the data coming out from the above query with another table in the database, for example Employee in this case
i.e. somewhat like this (note the following query does not perform the join correctly)
SELECT Participants.Node.value('@EmpID', 'INT') AS EmployeeID,
Participants.Node.value('@EmpName', 'VARCHAR(50)') AS EmployeeName
FROM
@Participants.nodes('/ArrayOfEmployees /Employees ') Participants (Node)
INNER JOIN
Employee EMP ON EmployeeID = EMP .EmployeeID
My desired output after the join would be
EmployeeID EmployeeName Email Home Address
--------------- ----------- --------------- -----------
1 abcd abcd@abcd.com New York
2 efgh efgh@efgh.com Austin
View 8 Replies
View Related
Mar 24, 2015
I have this sql....
Select
DISTINCT p.dbPatID, p.dbpatfirstname, p.dbPatLastName,
s.dbSchTypeCnt as SchDetailType, t.dbSchTypeCnt as SchTypeType,
ISNULL(r.dbStatusDesc, 'No Ref') AS dbStatusDesc,
ISNULL(t.dbSchTypeCode, 'No Ref') AS dbSchTypeCode,
ISNULL(t.dbSchTypeDesc, 'No Ref') AS dbSchTypeDesc,
[code]....
however, I only want the lastest a.dbPatApptTime and only when a.dbPFStatus = 1 and a.ClientRef = 'EPS'
So the stand alone sql could be....
Select Top(1) dbPatApptTime as LastVisitDate, dbSchTypeDesc as LastVisitDesc
from appointments
where dbPFStatus = 1 and clientref = 'EPS'
order by dbPatApptTime desc
I'm just not sure how to incorporate that into my sql or whether there is a better way,
View 9 Replies
View Related
Apr 25, 2015
I'm creating a sql stored procedure inside this proc it returns some information about the user, i.e location, logged in, last logged in, etc I need to join this on to the photos table and return the photo which has been set as the profile picture, if it hasn't been set then return the first top 1 if that makes sense?
The user has the option to upload photos so there might be no photos for a particular user, which I believe I can fix by using a left join
My photos table is constructed as follows:
CREATE TABLE [User].[User_Photos](
[Id] [bigint] IDENTITY(1,1) NOT NULL,
[UserId] [bigint] NOT NULL,
[PhotoId] [varchar](100) NOT NULL,
[IsProfilePic] [bit] NULL,
[Code] ....
Currently as it stands the proc runs but it doesn't return a particular user because they have uploaded a photo so I need to some how tweak the above to return null if a photo isn't present which is where I'm stuck.
View 3 Replies
View Related
Jul 20, 2015
I have data that I want at multiple granularities, 5,15,30 and 60 minutes. To reduce repetition, I have put them all in the same table, so that there is a column for 5,15,30 and 60 minutes, with a filtered index on each of the columns that removes the nulls. This means that each day will have 288 slots, but only 24 of the slots are filled in for 60 min data, and all of them are filled for 5 minute data.
I have another column that specifies the interval granularity, and my first thought was to access my data through a join, where I can use a CASE statement, and depending on the data granularity necessary, it will look at a different column:
INNER JOIN Data d ON
AND d.settlement_key =
CASE st.interval_granularity
WHEN 5 THEN [5_min_settlement_key]
WHEN 15 THEN [15_min_settlement_key]
WHEN 60 THEN [60_min_settlement_key]
ELSE NULL END
Despite the presence of the indexes on the columns, then the process seems to be quite slow, I think probably due to the fact that any query plan isn't going to know beforehand which of the columns it is going to use for any given dataset, until it actually starts to run, so it may not be optimised.
How I could optimise this based on the given structure? Maybe there are hints to be added to the join, or maybe I can clear the query plan each time the SQL is run? My other option for dealing with the data of different granularity was to use one column and repeat the data multiple times, each at the different granularity, but this makes my data, row and table sizes much higher, as we are adding just a column for each additional granularity. Would this work any better in future versions of SQL server, maybe with column store indexes?
View 5 Replies
View Related
