I've a table that has salescode(124!080) and salesamount(125.65!19.25) and I need to split the columns. Salesman(124) has commission(125.65). Here is the DDL:
USE tempdb;
GO
DECLARE @TEST_DATA TABLE
(
DT_ID INT IDENTITY(1,1) NOT NULL PRIMARY KEY CLUSTERED
, InvNoVARCHAR(10) NOT NULL
, SalesCode NCHAR(80) NOT NULL
, Amount NCHAR(80) NOT NULL
[code]....
I have the table as
|start || end1 |
1/06/2015 1:00 || 1/06/2015 1:30
1/06/2015 2:00 || 1/06/2015 3:00
1/06/2015 3:20 || 1/06/2015 4:00
1/06/2015 4:00 || NULL
I want the output as : -
|start || end1 |
1/06/2015 1:00 || 1/06/2015 1:30
1/06/2015 1:30 || 1/06/2015 2:00
1/06/2015 2:00 || 1/06/2015 3:00
1/06/2015 3:00 || 1/06/2015 3:20
1/06/2015 3:20 || 1/06/2015 4:00
1/06/2015 4:00 || NULL
I am trying the below mentioned code but it is not giving me the desired output..
with cte as
(select
start
,end1
,ROW_NUMBER() over (order by (select 1)) as rn
[Code] .....
I am getting wrong output as -
| start || end1 |
1/06/2015 1:00 || 1/06/2015 1:30
1/06/2015 1:30 || 1/06/2015 2:00
1/06/2015 2:00 || 1/06/2015 4:00
1/06/2015 4:00 || 1/06/2015 4:00
I need to split the amount equally into 12 months from Jan 2015 through Dec 2015.There is no date column in the table and the total amount has to be splitted equally.Guess I can't use Pivot here because the date column is not there ...How can I achieve this ?
CREATE TABLE #tbl_data (
Region Varchar(25),
Amount FLOAT,
[code]...
I have a ipaddress column is there where i need to split the column into two columns because of
values like below
172.26.248.8,Fe80::7033:acba:a4bd:f874
172.26.248.8,Fe80::7033:acba:a4bd:f874
172.26.248.8,Fe80::7033:acba:a4bd:f874
I have written the below query but it will throw some error.
select SUBSTRING(IPAddress0, 1, CHARINDEX(',', IPAddress0) - 1) as IPAddress0
from IPADDRESS
error:
Msg 537, Level 16, State 2, Line 1
Invalid length parameter passed to the LEFT or SUBSTRING function.
I am trying to join two tables and looks like the data is messed up. I want to split the rows into columns as there is more than one value in the row. But somehow I don't see a pattern in here to split the rows.
This how the data is
Create Table #Sample (Numbers Varchar(MAX))
Insert INTO #Sample Values('1000')
Insert INTO #Sample Values ('1024 AND 1025')
Insert INTO #Sample Values ('109 ,110,111')
Insert INTO #Sample Values ('Old # 1033 replaced with new Invoice # 1544')
Insert INTO #Sample Values ('1355 Cancelled and Invoice 1922 added')
Select * from #Sample
This is what is expected...
Create Table #Result (Numbers Varchar(MAX))
Insert INTO #Result Values('1000')
Insert INTO #Result Values ('1024')
Insert INTO #Result Values ('1025')
Insert INTO #Result Values ('109')
Insert INTO #Result Values ('110')
[Code] ....
How I can implement this ? I believe if there are any numbers I need to split into two columns .
Deciding whether or not to use a CTE or this simple faster approach utilizing system tables, hijacking them.
SELECT s.ORDER_NUMBER, s.PRODUCT_ID, 1 AS QTY, s.VALUE/s.QTY AS VALUE
FROM @SPLITROW s
INNER JOIN master.dbo.spt_values t ON t.type='P'
AND t.number BETWEEN 1 AND s.QTY
Just wanted to know if its okay to use system tables in a production environment and if there are any pit falls of using them ?
I have a table that has the following structure:
EntryID int,
Categories varchar(200)
values look like:
541,'A,B,C'
345,'B,C'
234,'A,C'
657,'D,E'
435,'D'
what I want to do is extract the Categories column to a normalized separate table:
541,'A'
541,'B'
541,'C'
345,'B' ....
I found the split using the tally table useful to split one-by-one, but how can it be applied when you are referring to a table?
I want to concatenate the column_names with the respective values.
Create table #test1 (Id int,Name varchar(10),Country varchar(10))
insert into #test1 values ( 1,'JOHN','USA'),
(2,'SAM','CANADA'),
(3,'HO','CHINA'),
(4,'RAM','INDIA')
select * from #test1
I have temp table with columns (Id,Name, Country). I want to concatenate column_name with their respective values; means i want column_header with every value for the column and then i want to concatenate multiple columns. I am looking for something like below:
ID values
1,NAME-john-COUNTRY-USA
2,NAME-SAM-COUNTRY-CANADA
3,NAME-HO-COUNTRY-CHINA
4,NAME-RAM-COUNTRY-INDIA
Note: This is just a sample .i am looking something dynamic because i have around 50 tables.i can do with query below but since i don't have static columns and table i am looking for something dynamic
select ID, (a+'-'+B) as Value from (
select ID,'NAME'+'-'+NAME as a,'Country'+'-'+Country as b from #test1
I have been trying to separate firstname,last name,middle from name column
Existing Format
Column Name =FIRST,LAST M
Desired
First
Last
M
I would llike to divide one column into three columns...How can i achieve it..
Please let me know
I've a table that has salescode(124!080) and salesamount(125.65!19.25) and I need to split the columns. Salesman(124) has commission(125.65). Here is the DDL:
USE tempdb;
GO
DECLARE @TEST_DATA TABLE
(
DT_ID INT IDENTITY(1,1) NOT NULL PRIMARY KEY CLUSTERED
, InvNoVARCHAR(10) NOT NULL
, SalesCode NCHAR(80) NOT NULL
[code]....
Below is a XML column data. How to get the Id and respective Names for "Case Manager" Dropdown ONLY in SQL server 2008. I don't want to get anything related to "Intake Staff" drop down.
<DropDown Prompt="Case Manager" Column="case_manager" AddOnly="false" ReadOnly="false" Required="false" CanHaveNotes="no" LabelCssClass="" IndentLevel="1" FirstEntryBlank="false" CssClass="" DefaultValue="" ChoiceType="1">
<Items>
<Item Id="1">ABC</Item>
<Item Id="2">DEF</Item>
<Item Id="3">GHI</Item>
<Item Id="4">JKL</Item>
<Item Id="5">MNO</Item>
[code]....
I have a column with the following information in it. I need to split the column and parse the values. I have Parsed one single values from but, not multiple times.
<TV<MR1#4.0#true#2.0#USD>VT>,<TV<MR2#3.0#true#1.5#USD>VT>,<TV<MR3#0.0#true#0.0#USD>VT>,<TV<MR4#0.375#true#0.19#USD>VT>
MR1 -Model Code,
4.0 - Percentage,
true - isAbs,
2.0 - AppliedValue --> This is Actual amount applied as tax.
USD - Currency
For the example provide , the totalTaxValue would be 2.0 + 1.5+0.0+0.19 = 3.69
I created a query that got the following result. But I expect to get the structure like, care_nbr, cust_nbr,legal_name, address_type=physical address, addr_line_1, addr_line_2, address_type-primary address, ddr_line_1, addr_line_2. That means I only need primary and physical address, and expect them to show in a row to each care_nbr. How to perform that?
CARE_Nbr||Cust_Nbr||Legal_Name||||||| Address_Tpye |||Addr_Line_1 ||||||||||||||||Addr_Line_2
99000001||004554||Mac Marketing, LLC||Billing Address||210 Parktowne Blvd Ste. 1||NULL
99000001||004554||Mac Marketing, LLC||Mailing Address||210 Parktowne Blvd Ste. 1||NULL
99000001||004554||Mac Marketing, LLC||Primary Address||210 Parktowne Blvd Ste. 1||NULL
99000001||004554||Mac Marketing, LLC||Physical Address||210 Parktowne Blvd Suite 1||NULL
How should I modify this query to get my expected result?
select a.CARE_Number,
a.Customer_Nbr_Txt,
a.Customer_Type_Txt,
a.Legal_Name_Txt,
c.Address_Type_Txt,c.Address_Line_1_Txt,c.Address_Line_2_Txt,
[code]....
SQL syntax to split a column that contains ntext values that are separated with this value : ;#
I need it to create 3 new columns
i.e.: I have a column that contains values such as:
ROW1: ;#typea;#typeb;#typec;#typed;#
ROW2: ;#typeb;#typec;#
ROW3: ;#typeb;#
I need it to convert to 3 new columns and strip out the ;#:
E.g.:
Column 1
typea
typeb
typeb
Column 2
typeb
typec
blank
A common partitioning scenario is when the partition column has the same value for every record in the partition, as opposed to a range of values. Am I the only person who wonders why there isn't an option to automatically partition a table based on the unique values of the partition column? Instead of defining a partition function with constants, you ought to be able to just give it the column and be done. This would be particularly valuable for tables partitioned on a weekly or monthly date; when new data is added it could simply create a new partition if one doesn't already exist.
View 4 Replies View RelatedI am trying to break apart a list of filenames that was inserted into a database. It only breaks out the first one then moves onto the next record. If I do them individually then seem to work but not the whole table when queried. I need to break out each file into a temp table then insert them into a documents field in a database.
my filenames look like so and can have from 1 file name to 10 file names in the string.
test.pdf,test2.pdf,test4.tif,test5.pdf
somedoc.tif,test.docx,test4.pdf
This is my current method, I needed to create a cursor around it to go through all the records, split out the filenames and insert into a temp table. But if there is a better way ill do it. The problem with this is only the first file is getting inserted into the temp table and nothing else even if the filename has 4 files in it.
Create table #tempFiles (OldStrId int, OldPercent int, strfilename varchar(max), RequestId int, OblId int)
declare @OldStr int, @OldPer int, @FileName varchar(max), @intcount int;
Declare filenames CURSOR FOR Select intSTRBonusID, intPercentID, strFileName from tblSTR where strFileName > ''
UNION ALL
Select intSTRBonusID, intPercentID, strFileName from tblSTRHist where intPercentID in (61,62) and strFileName > ''
[code]....
I am working now on optimization of an update query for a particular table and I want to measure the number of page splits after each update. How to check it?
View 6 Replies View RelatedI am trying to split the annual cost into monthly numbers based on the contract Period.Since the contract period varies from company to company not sure how to implement the logic.
create table #Invoice
(
Company Varchar(50),
Startdate2015 DateTime,
EndDate2015 DateTime,
ContractPeriod2015 Int,
ContractAmount2015 Float,
[code]..
Our front end saves all IP addresses used by a customer as a comma separated string, we need to analyse these to check for blocked IPs which are all stored in another table.
A LIKE statement comparing each string with the 100 or so excluded IPs will be very expensive so I'm thinking it would be less so to split out the comma separated values into tables.
The problem we have is that we never know how many IPs could be stored against a customer, so I'm guessing a function would be the way forward but this is the point I get stuck.
I can remove the 1st IP address into a new column and produce the new list ready for the next removal, also as part of this we would need to create new columns on the fly depending on how many IPs are in the column.
This needs to be repeated for each row
SELECT IP_List
, LEFT(IP_List, CHARINDEX(',', IP_List) - 1) AS IP_1
, REPLACE(IP_List, LEFT(IP_List, CHARINDEX(',', IP_List) +0), '') AS NewIPList1
FROM IpExclusionTest
Results:
IP_List
109.224.216.4,146.90.13.69,146.90.85.79,46.208.122.50,80.189.100.119
IP_1
109.224.216.4
NewIPList1
146.90.13.69,146.90.85.79,46.208.122.50,80.189.100.119
I was contacted by the SAN team to test backup/restore of larger databases using a split-mirror backup (BCV) or clone that is taken from production db server and copied to another sql box. They want to use this process once a week. I see the mounted drives with the data/log files. All looks good. Initially I attempted to attach the databases and received (Unable to open the physical file db.mdf Operating System Error 5 Access is denied). I manually granting SQLServerMSSQLUser$<computer_name>$<instance_name> on all of the physical files 20 total. That worked.
Since this will be weekly, the SAN team performed the copy again and now none of the databases can communicate with the newly copied files. NTFS permissions need to be set again. I'm getting (Operating System error 21: the device is not ready). Is there something that I'm missing in this process how the vendor BCV clones the data and SQL communicates with the copied files as I was thinking it would be more automated process?
I got a table with organisation codes with postcal code ranges, from-to.
Example:
Organisationcode, startpostalcode, endpostalcode
001 52005249
I would like to generate rows for this range like this:
001 5200
001 5201
001 5202
.....
001 5249
The table looks like this:
SELECT OrganisationCode, PostcalCodeStart, PostalCodeEnd
FROM dbo.DimOrganisation
declare @var varchar(8000)
set @var='Name1~50~20~50@Name2~25.5~50~63@Name3~30~80~43@Name4~60~80~23'
---------------------
Create table #tmp(id int identity(1,1),Name varchar(20),Value1 float,Value2 float,Value3 float)
Insert into #tmp (Name,Value1,Value2,Value3)
Values ('Name1',50,20,50 ), ('Name2',25.5,50,63 ), ('Name3',30,80,43 ), ('Name4',60,80,23)
select * from #tmp
I want to convert to @var to same like #tmp table ..
"@" - delimiter goes to rows
"~" - delimiter goes to columns
I need to split NUMERIC & ALPHABETICAL values from string.
for eg :-
1234heaven56-guy
output
123456 heaven-guy
I have a comma separated field containing numerous 2 digit numbers that I would like splitting out by a corresponding unique code held in another field on the same row.
E.g
Unique Code Comma Separated Field
14587934 1,5,17,18,19,40,51,62,70
6998468 10,45,62,18,19
79585264 1,5,18
These needs to be in column format or held in an array to be used as conditional criteria.
Unique Code Comma Separated Value
79585264 1
79585264 5
79585264 18
I have a ipaddress column is there where i need to split the column into two columns because of values like below
172.26.248.8,Fe80::7033:acba:a4bd:f874
172.26.248.8,Fe80::7033:acba:a4bd:f874
172.26.248.8,Fe80::7033:acba:a4bd:f874
I have written the below query but it will throuh some error.
select SUBSTRING(IPAddress0, 1, CHARINDEX(',', IPAddress0) - 1) as IPAddress0
from IPADDRESS
error:
Msg 537, Level 16, State 2, Line 1
Invalid length parameter passed to the LEFT or SUBSTRING function.
Is there a way to display a column alias as part of the result set column labels?
View 9 Replies View Relatedwhen creating a new table. How can I set the default value of the column to equal the value of another column in the same table?
View 5 Replies View RelatedI am getting an error importing a csv file both using SSIS and SSMS. The csv is comma delimited with quotes for text qualifiers. The file gets partially loaded and then gives me an error stating The column delimiter for column "MyColumn" was not found. In SSIS it gives me the data row which is apparently causing the problem but when I look at the file in a text editor at the specific row identified the file has the comma delimiter and it looks fine. I am using SQL Server 2008.
View 9 Replies View RelatedWe have SharePoint list which has, say, two columns. Column A and Column B.
Column A can have three values - red, blue & green.
Column B can have four values - pen, marker, pencil & highlighter.
A typical view of list can be:
Column A - Column B
red - pen
red - pencil
red - highlighter
blue - marker
blue - pencil
green - pen
green - highlighter
red - pen
blue - pencil
blue - highlighter
blue - pencil
We are looking to create a report from SharePoint List using SSRS which has following view:
red blue green
pen 2 0 1
marker 0 1 0
pencil 1 3 0
highlighter 1 1 1
We tried Sum but not able to display in single row.
I have an SSIS package that imports data from an Excel file, replaces any value in Excel that reads "NULL" to "", then writes the data to a couple of databases.
What I have discovered today, is I have two columns of dates, an admit date and discharge date column, and what I need to do is anywhere I have a null value in the discharge date column, I have to replace it with the value in the admit date column.
I have searched around online and tried a few things using the Replace funtion in Derived columns but no dice so far.
I have two tables.
Emp:
id | Deptno | sdate | edate | locid
1 | 10 |2014-09-19 |2009-09-25 | 100
1 | 10 |2014-11-06 |2009-11-06 | 100
1 | 10 |2014-12-11 |2014-12-14 | 100
1 | 10 |2009-07-01 |2009-07-20 | 100
2 | 20 |2007-07-11 |2007-07-17 | 104
Empl1:
Id | Deptno | edate | refid | refid1
1 | 10 | 2014-11-06 | 201 | 204
1 | 10 | 2014-12-13 | 204 | 202
1 | 10 | 2014-12-12 | 207 | 124
1 | 10 | 2003-05-04 | 105 | 103
2 | 20 | 2007-07-14 | 102 | 106
I am trying to combine these two tables into the output below:
Id | Deptno | locid | current_refid | current_refid1 | last_refid | last_refid1
1 | 10 | 101 | 201 | 204 | 204 |202
2 | 20 | 104 | 102 | 106 | 102 |106
The tables share the common columns id and deptno. To get the above result, the emp1.edate must be between emp.sdate and emp.edate.
If that condition is met, we need to retrieve the refid and refid1 values corresponding to the lowest edate as last_refid and last_refid1. Then we need the refid and refid1 values corresponding to the emp1.edate between emp.stdate and emp.edate to be retrieved as the current_refid and current_ refid1.
select a.id,a.deptno,a.locid,b.refid,b.refid1
from
emp b
[code]...
I'm using SQL Server 2012 and I need to run a query against my database that will output the difference between 2 dates (namely, DateOfArrival and DateOfDeparture) into the correct month column in the output.
Both DateOfArrival and DateOfDeparture are in the same table (let's say GuestStay). I will also need some other fields from this table and do some joins on some other tables but I will simplify things so as to solve my main problem here. Let's say the fields needed from the GuestStay table looks like below:
I need my query to output in the following format:
How to write this query?
I want to add $ symbol to column values and convert the column values to western number system
Column values
Dollar
4255
25454
467834
Expected Output:
$ 4,255
$ 25,454
$ 467,834
My Query:
select ID, MAX(Date) Date, SUM(Cost) Dollars, MAX(Funded) Funding from Application
COST is the int datatype and needs to be changed.