I am getting the error The transaction log for database 'ReplicationDB' is full due to 'LOG_BACKUP'.log_reuse_wait_desc from sys.databases is showing logbackup
The database is subscribed database. We configured transactional replication. But the transactional replication is getting errors and failed. Is there relation b/n this replication failures and log growth in subscriber db?
Any experience of success or failure setting up CDC on the subscriber end of transactional replication?
Also for a bonus answer, why are explicit index operations not permitted (I'm assuming this is even on the publisher?) From BOL:
• Explicitly adding, dropping, or altering indexes is not supported. Indexes created implicitly for constraints (such as a primary key constraint) are supported.
Hi,
I am trying to setup bi-directional transactional replication between 2 SQL Servers,
I add the subscription on both the servers using the code below.
EXEC sp_addsubscription @publication = N'test',
@article = N'all', @subscriber = 'AnyServer',
@destination_db = N'test', @sync_type = N'none',
@status = N'active', @update_mode = N'read only',
@loopback_detection = 'true'
GO
I have defined 'AnyServer' on both the servers using cliconfg
(Server1's AnyServer pointed towards Server2 and Server2's AnyServer pointed towards Server1, I need to do that because there is a restriction to run the same code on both the servers),
After inserting a record on server1 in the 'test' database, the changes successfully transfers to the server2, then server2 sends it back to server1 and server1 generates the error of
"Violation of PRIMARY KEY constraint 'PK_Table1'. Cannot insert duplicate key in object 'Table1'."
It seems as if loop detection is failing if I keep the same subscriber name on both sides.
It runs fine when I change the subscriber name in the subscription (@subscriber = 'Server2' for server1 and @subscriber = 'Server1' for server2).
Can anybody explains this behavior to me?
Hi,
I am trying to setup mirrored subcriber in Transactional Replication in SQL 2005. I am not able to do so as it don't work after failover.However I am able to setup mirrored publisher with distribution property "PublisherFailoverPartner" for snapshot and log reader agent profiles and it works even after failover.
However I need to know, do we have something called "Subscriberfailoverproperty" or any other method to set up mirrored subscriber in Transactional Replication in SQL 2005.
Thanks
Kiran Patil
i have replication setup and working, there are 3 subscribers and now i want to add a 4th one. is it ok if i just add the subscriber and reinitialize replication?
View 1 Replies View RelatedGreetings All, I was hoping that a replication sage might be able toanswer a question for me.I want to have one subscriber subscribing to N publishers. Iessentially have a company that has a main headquarters and threesatellite offices. I want each of the satellite offices to push theirdata up to the master database. From what I have read it seems likethis should not be a problem. Some questions that come to mind are:1.)Does the master need to be read only or can it be configured to beupdateable as well?2.)Can the distribution agent on all the publishers be set tocontinuously distribute or should it be staggered so as not to cause aproblem when another distribution agent is running?3.)If the distribution is set to "delay distribution" will this causechanges on the subscriber to be pushed out to the publishers?In this database guid's are used as pk's so the issue of pk collisionsis not a problem.I hope that this question is not too vague. My experience thus farwith replication has been simple one way transactional and simplemerge replication.Regards, Louis Frolio
View 3 Replies View RelatedHi!
The distributor was down for a long time (neer the week) and after that the commands stop applying to subscriber, while they successfully collected from publisher and stored into distributor.
Replication agent on distributor reports that initial snapshot is not available. It seems subscription is expired. But all commands from the point distributor down I have. How can I make distr agent to resume activity without reinitialize snapshot?
Hi
I need to setup transactional replication for a production server.
The tables (articles) at publisher being replicated can expect schema changes.
Is there any way to reflect schema changes at subscriber using transactional replication.
Early Thanks,
Salman Shehbaz.
We have a central office with a SQL2005SP4 server (yeah, I know... old as heck) that's the main database and it has multiple subscribers in regional offices. Well... one of the regional offices server is failing, and it needs to be replace.
The original server is an ancient Win2003 86x
The Server team will build a new Win2008r2 64x, and use the same name and IP address
And I'm tasked with the SQL part.
I'll be installing the same version/patch of SQL, but 64x instead, and migrate all databases, including the system databases.
How do I handle replication? Do I need to reintialize from scratch? or can I just use the backup as a starting point?
When creating the snapshot I didn't choose the option copy non-clustered indexes. I created some indexes manually on subscriber database. Replication failed later with some issue.
so reinitialized with new snapshot but all the indexes are gone from the subscriber database.
How to keep the indexes without dropping from subscriber database whenever we reinitialized with snapshot
I have taken over a transactional replication setup that is being usedfor fault tolerance (I know, I know...).The scenario I am concerned with is where the publisher goes down due tofailure, so we need to point our application at the subscriber and startupdating the data there. We are not using the immediate updating option.How do I go about re-syncing the publisher with the data that been addedto, or changed on the subscriber, when the publisher comes back online?Thanks,TGru*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies View RelatedHi all
i have setup default transactional replication using locat distributor scheme. I need to create triggers on tables at subscriber side. Can this be done using transaction replication?
Thanks,
Arslan.
How do we know our schema changes will propagate to subscriber without breaking the replication? Is there any t-sql command to find out the option true or false?
View 2 Replies View RelatedFor study effect, can I configure merge replication using just one SQL Server Instance?
View 3 Replies View RelatedI have a primary and secondary servers both running Windows 2000 SP3 with SQL 2000 SP3. I have set up transactional replication with the primary server as publisher and the secondary server has the distributor and subscriber DB. I am testing the scenerio where my primary server goes down and I have to make updates to the secondary server until my primary server comes back up. I am able to update my subscriber database and the transactions go into the MSreplication_queue table to be pushed back to the primary when it comes back up. When I bring the primary server back up and start the queue agent job it starts pushing the transactions over and then stops after 4 or 5 transactions with the error "Failed while applying queued message to publisher". I have attached part of the log file for the agent below
dbserver2.Old_Processing: {? = call dbo.sp_getsqlqueueversion (?, ?, ?, ?)}
dbserver2.Old_Processing: {? = call dbo.sp_replsqlqgetrows (N'DBSERVER', N'Old_Processing', N'Old_Processing')}
[4/15/2004 3:59:47 PM]dbserver2.distribution: exec dbo.sp_helpdistpublisher @publisher = N'DBSERVER'
Connecting to DBSERVER 'DBSERVER.Old_Processing'
DBSERVER.Old_Processing: {? = call dbo.sp_getqueuedarticlesynctraninfo (N'Old_Processing', 21)}
SQL Command : <exec [dbo].[sp_MSsync_ins_IQ2KProcSystem_1] N'dbserver2', N'Old_Processing', '072175', '2004-03-19 00:00:00.000', 1>
DBSERVER.Old_Processing: {? = call dbo.sp_getqueuedarticlesynctraninfo (N'Old_Processing', 15)}
SQL Command : <exec [dbo].[sp_MSsync_ins_NightlyProcess_1] N'dbserver2', N'Old_Processing', '072175', '2004-03-19 00:00:00.000', '2004-04-15 15:56:44.623000000', 'Begin ProcessIQ2KSystem', 'AB14E5D7-C81D-4A39-A8F5-51F1C48227B0', '17E5D98F-EDF0-41D0-9991-97511B850720', 1>
SQL Command : <exec [dbo].[sp_MSsync_upd_IQ2KProcSystem_1] N'dbserver2', N'Old_Processing', '072175', '2004-03-19 00:00:00.000', 1>
DBSERVER.Old_Processing: {? = call dbo.sp_getqueuedarticlesynctraninfo (N'Old_Processing', 7)}
SQL Command : <exec [dbo].[sp_MSsync_upd_TheatreProcess_1] N'dbserver2', N'Old_Processing', '072175', 1, '2004-03-19 00:00:00.000', 1, NULL, '79A114D6-FF31-4E37-AC2D-90C0A0114F40', '072175', 1, '2004-03-19 00:00:00.000', 0, NULL, 'AF61A098-44A3-45D7-B25B-E8EA9CD464A1', 0x2800, 1>
Failed while applying queued message to publisher
Disconnecting from DBSERVER 'DBSERVER'
Worker Thread 692 : Task Failed
Disconnecting from dbserver2 'dbserver2'
Processed 3 queued trans, 3 cmds, 0 conflicts
Queue Reader aborting
In the sql server logs I am getting this message:
Replication-Replication Transaction Queue Reader Subsystem: agent Repl Queue Reader failed. Failed while applying queued message to publisher.
Error: 14151, Severity: 18, State: 1
Any help would be greatly appreciated
We have a database which is (a subset of tables are) replicated to another via transactional replication. Whilst most changes made at the published database reach the subscriber within a matter of seconds, we have a SQL Agent job which performs a calculation in the published database and then immediately exports data from the subscriber using log shipping. The result is that the calculated changes do not make it through to the exported transaction logs in time.
Is there a way to manually "refresh" the subscriber databases using T-SQL?
Hello,
Are there any requirements that dictate the SQL Server version for the distribution agent for a SQL 2000 publisher with a transactional push subscription to a SQL 2005 subscriber?
Thanks in advance,
John
Is there a way to force the snapshot to use a format file when bcp'ng the data to the subscriber?
The publisher and subscriber schemas are slightly different. Mainly added columns to the subscriber.
We have a post snapshot script that updates these additional columns on the subscriber.
I'd like to force the snapshot to use a format file, so it doesn't error when initially loading the data to the subscriber.
Is this possible?
I have a transactional replication environment that creates subscribers on another server as a staging area for an ETL process to a data warehouse application on a 3rd server which is the report repository. Currently the ETL process runs every 10 minutes and performs it's function across approx 150+ subscriber databases and consolidates it to the data warehouse.
I have an SLA of 2 minutes. I'd like to rework the ETL process (which run as SSIS job at the moment) to be specific to a single database and fire that one ETL proces when changes have been applied to that subscriber database only. Of these 150+ databases generally only about 8-10 are updating the subscriber at any given time per Repl Monitor. I'm thinking that if I only have a few transactions to apply to a single db the ETL would run in seconds dynamically as the subscriber is update.
The issue is how to fire the ETL process upon completion of updates to the subscriber DB? I'm thinking of using SP_Start_job passing the DBID to update the warehouse but unsure whether this is possible but if so where to trigger it.
Is there a script to find which non-clustered indices are replicated? I know i can do this easily through GUI , having a script will make my life much easier ....
View 0 Replies View RelatedWe have a large database with a small number of large tables in it (and a larger number of SMALLER tables), and it is a publisher for a transactional replication scenario. When I create a snapshot to initialize a new subscription, I notice with the larger tables that sometimes it generates multiple files in the snapshot folder, usually in multiples of 16, and numbers them like this:
MyTable_3#1.bcp
MyTable_3#2.bcp
...
MyTable_3#16.bcp
With other tables, I'll get just one LARGE snapshot file, named:
MyOtherTable_4.bcp
In the latter case, the file can be very large (most recent is 38GB).
In both cases, the subscription will eventually be initialized, but the smaller files will generate separate log entries every few minutes in the Replication Monitor, showing 'Bulk Copied data into 'MyTable' (34231221 rows)', whereas the larger table will generate only ONE log entry, showing 'Bulk coping data into table 'MyOtherTable', and it may take a couple of hours before there is anything else showing...except for an entry saying, 'The process is running and is waiting for a response from the server.'
My question is: what would be the difference between the two tables that would result in one generating MULTIPLE snapshot files, the other only a single, much larger one? The only difference I can see in the table definition is that the one generating multiple files has a clustered index, whereas the others do not.
I have documentation in the form of extended properties for tables which are subscribers in a replication scheme. The documentation describes the tables in reference to their replication scheme. I don't want to apply them to the source and have them published.I can't apply the extended properties receiving the error, 'don't have permission' yet I am DB creator on all systems. The theory is that I can't modify the subscription. Which makes sense.Can I turn off the replication, apply the extended properties, then turn on replication without causing harm?
View 0 Replies View RelatedThere is a SQL Server 2008 R2 SP3 Clustered Instance that has Transactional Replication. It is by no means a large replication setup in terms of data/article count. SQL Server was recently patched to SP3 and is current on Windows 2008 R2 Patches.
When I added a new article to replication (via 2014 SSMS GUI) it seems to add everything correctly (replication tables/procs show the new article as part of the publication).
The Publication is set to allow the snapshot to generate for just new articles (setting immediate_sync & allow_anonymous to false).
When the snapshot agent is run, it runs without error and claims to have generated a snapshot of 1 article. However the snapshot folder only contains a folder for the instance (that does have the modified time of the snapshot agent execution) and none of the regular bcp/schema files.
The tables never make it to the subscribers and replication continues on without error for the existing articles. No agents produce any errors and running the snapshot agent w/ verbose output provides no errors or insight into any possible issues.
I have tried:
- dropping/re-adding the article in question.
- Setting up a new Snapshot Folder
- Validated all the settings and configurations
I'm hesitant to reinitialize a subscriber since I am not confident a snapshot can be generated. Also wondering if this is related to the SP3 Upgrade, every few months new articles are added to the publication and this is the first time since the upgrade to SP3 that it has been done.
I setup Transactional replication between two SQL Servers.
I am getting the following errors: " Could not find stored procedure 'sp_MSins_stores'." and the job fails.
I dont have any idea why I am getting these errors. I am getting this error for every table in the publication.
Any suggestions are welcome.
Thanks in advance.
I am investigating the feasibility of a configuration with 3 databases on SQL2005
DB_A is an OLTP database and serves up transactional publication pub_txn - with updateable subscriptions
DB_B is a subscriber database which subscribes to pub_txn
DB_B is also a publisher which serves up merge publication pub_merge
DB_C is a subscriber database which pulls pub_merge
===============================
Updates on DB_A are successfully replicated to DB_B
Howvever, when DB_C pulls updates, it doesn't find the update sent to DB_B
===============================
Updates on DB_B are successfully replicated to both DB_A and DB_C
===============================
Updates on DB_C initially failed with the error
Msg 916, Level 14, State 1, Procedure trg_MSsync_upd_course_type, Line 0
The server principal "repllinkproxy" is not able to access the database
"DB_C" under the current security context.
I then changed the login repllinkproxy to be a db_owner in DB_C
I now get the error
Msg 208, Level 16, State 1, Procedure sp_check_sync_trigger, Line 23
Invalid object name 'dbo.MSreplication_objects'.
=================================
I have three questions as a result
1) Is there anything fundamentally wrong with what I am trying to achieve?
2) Why is update on DB_A not reaching DB_C
3) Why can't I update DB_C?
Any suggestions gratefully received
aero1
Hi,
I have more than 80 databases on my publisher (SQL Server 2000 SP4), I tried to enable Transaction Replication on all of those databases instantly through some T-SQL programming and DTS Packages. Every thing works fine until the snapshot agents starts to take sanpshot from the publisher databases. As soon as their snapshot agents start for those 80 databases, they start giving the deadlock error. All 80 snapshot agents starts at the same time.
Error Message:
Transaction (Process ID xxx) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction.
Error Detail:
Transaction (Process ID xxx) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction.
(Source: Server_Distribution (Data source); Error number: 1205)
---------------------------------------------------------------------------------------------------------------
WHY???
I received alerts from a couple of the production servers last night stating that the log file is running out of space. So, I took some log backups and shrunk those files. However, I would like to find out what made the log grow like that. After all, I have t-log backups scheduled every 30 minutes.Is there a way I can find out the reason behind the log growth?
View 9 Replies View RelatedI recently updated the datatype of a sproc parameter from bit to tinyint. When I executed the sproc with the updated parameters the sproc appeared to succeed and returned "1 row(s) affected" in the console. However, the update triggered by the sproc did not actually work.
The table column was a bit which only allows 0 or 1 and the sproc was passing a value of 2 so the table was rejecting this value. However, the sproc did not return an error and appeared to return success. So is there a way to configure the database or sproc to return an error message when this type of error occurs?
I need to monitor my database growth, as few of databases are growing rapidly. My client wants the growth list of my databases. have report of database growth of specific databases, at least of one month.
View 3 Replies View RelatedScript to find DATEWISE MDF FILE GROWTH Like
30/6/2015 10%
1/7/2015 8%
I have a SQL Server 2008 R2 database.
I have modified the autogrowth configuration several times. The strangest thing... they keep reverting back to the original configuration.
Any good starting point to understand for a specific db, how many max VLFs are good to have so that it does not cause long startup or backup times?
Also, I need some calculation so that I can identify a best growth parameter I will setup for each database ?
I'm seeing the below msg in errorlog and curious to know the changes (right sizing/growth) to be done? As of now 100 MB of log file growth value is set (refer: [URL] ....)
Database BizTalkMsgBoxDb has more than 1000 virtual log files which is excessive. Too many virtual log files can cause long startup and backup times. Consider shrinking the log and using a different growth increment to reduce the number of virtual log files.
Does there a way or script to find the rows, space used by the specific tables based on every year.
View 9 Replies View Related