SQL Server 2008 :: Verify Partition Data Load Syntax?
Mar 2, 2015What is the syntax to verify Partition data load.
View 1 Replies
ADVERTISEMENT
SQL Server 2008 :: Verify Partition Data Load Syntax
Feb 28, 2015What is the syntax to verify that the partition data is loaded into the correct partition.
View 0 Replies View RelatedSQL Server 2008 :: Loading Data Into New Partition Table Online
Mar 1, 2015When you load the data into a new partition table, can it to done online without any downtime? because I have few tables that are around 250 gigs and more.
View 5 Replies View RelatedSQL Server 2008 :: Incremental Load Only Required Data?
Apr 30, 2015I have a table in Server A and it has 5 columns. One is Address & ID, CreateDatetime,..
I need to transfer data from this table from Server A to server B for a report pupose. The Address column in this table has some places two address in the table. I am giving ex below
Address
Houston, Dallas
Redmond
Sacramento
New Jersey, New York
I want to avoid the rows where address are two Houston, Dallas & New Jersey, NewYork to the destination table in server B and need to do incremental loads.
how to proceed with this?
The version we are using is Sql Server standard edition 2008r2
SQL Server 2008 :: Load Data For Yesterday And Specific Date
May 31, 2015I have a ssis package, which runs on date parameter. If we dont specify the date it always load data for yesterday's date. And if we give any specific date like '2015-05-10', It should load for that date. How can we achieve this dynamically (using package configuration)? Once we load for any specific date, package should be set for yesterday's date dynamically. How to achieve this as I am new to SSIS.
View 2 Replies View RelatedSQL Server 2008 :: Slow Row Number Over Partition
Jul 28, 2015I have a simple table with 4 columns
(idAuxiliarPF(BIGINT+PK), pf(BIGINT+FK), Data(DateTime), Descr(NVARCHAR))that has aprox. 50k rows.
I need to create a partition of the data to join to another table, the query that i have:
SELECT
ROW_NUMBER() OVER (PARTITION BY pf ORDER BY Data DESC, idAuxiliarPF DESC) AS RN,
pf,
Data,
Descr
FROM dbo.PFAuxiliar
WHERE Data <= GETDATE()This query takes around 40 seconds to return the results
If i remove the Descr column, the query it takes no time.
SELECT
ROW_NUMBER() OVER (PARTITION BY pf ORDER BY Data DESC, idAuxiliarPF DESC) AS RN,
pf,
Data
FROM dbo.PFAuxiliar
WHERE Data <= GETDATE()I have two indexes, Clustered (idAuxiliarPF), NONClustered(pf).
How can i improve the performance of this query?
Please Verify Syntax
Jun 15, 2007I haven't written any .net database updates before. I wrote the following code for a visual web developer application and it appears to work. There is no close function or anything. Will the adapter, builder, dataset, and row objects be cleaned up and disposed of properly? Please tell me if I need to include anything else. The connection object is made elsewhere. ThanksDim adapter As New Data.SqlClient.SqlDataAdapter("SELECT * FROM Inventory WHERE InUnique=" & ListValue.Value, connect)
Dim builder As New Data.SqlClient.SqlCommandBuilder(adapter)Dim dataset As Data.DataSet = New Data.DataSet()
adapter.Fill(dataset, "Inventory")Dim datarow As Data.DataRow = dataset.Tables(0).Rows(0)
datarow("InAgUnique") = Val(InAgUnique.Text)datarow("InTyUnique") = Val(InTyUnique.Text)
datarow("InName") = InName.Textdatarow("InPnUniquePrimary") = Val(InPnUniquePrimary.Text)
datarow("InPnUniqueSecondary") = Val(InPnUniqueSecondary.Text)datarow("InPnUniqueTertiary") = Val(InPnUniqueTertiary.Text)
datarow("InPnUniqueSupervisor") = Val(InPnUniqueSupervisor.Text)datarow("InDescription") = InDescription.Text
datarow("InProblemInstructions") = InProblemInstructions.Text
adapter.Update(dataset, "Inventory")
SQL Server 2008 :: Create Partition On Existing Table?
Mar 4, 2015Can we create the Partition on Existing Table?e.g Create table t ( col1 number(10,0), Col2 Varchar(10)) ;After the table Creation can we alter the table to partition the table.
View 2 Replies View RelatedSQL Server 2008 :: Automate New Partition Creation In Table Partitioning?
May 8, 2013we planning to create partitioning on existing tables. The partitioning is on date column, there should be one partition for each year.
Creating of new partitions should be automated, and also we dont have any plans of archiving old data, all we want is that new partition creation should be automated.
SQL Server 2008 :: Partition Sliding Window Causing Loads Of Blocks
Oct 29, 2015We have a massive database with an almost massive amount of traffic to and from it.
I've been requested to implement a sliding window partitioning with 2 partitions an active and passive 1,I managed to test this on a very small testbed last month.
I currently moved 97k table on to the partition function leaving me another 26 k to go
I'm using the following stored procedure to implement the sliding window
CREATE PROCEDURE [dbo].[ManageFactSlidingWindow](@pFunction nvarchar(max),@pSchema nvarchar(max),@FG nvarchar(max),@moveDays int)
/*****************************************************************************
PROCEDURE NAME: [ManageFactSlidingWindow]
AUTHOR: Arshad Ali
CREATED: 02/24/2013
DESCRIPTION: This stored procedure manages sliding window for the partitioned table
VERSION HISTORY:
DATE EMAIL Company DESCRIPTION
[Code] .....
When I try to move the partition even a single day I get loads of locks.
SQL Server 2008 :: No Option To Automatically Partition Table Based On Unique Values Of Column?
Jun 17, 2015A common partitioning scenario is when the partition column has the same value for every record in the partition, as opposed to a range of values. Am I the only person who wonders why there isn't an option to automatically partition a table based on the unique values of the partition column? Instead of defining a partition function with constants, you ought to be able to just give it the column and be done. This would be particularly valuable for tables partitioned on a weekly or monthly date; when new data is added it could simply create a new partition if one doesn't already exist.
View 4 Replies View RelatedSQL Server 2008 :: How To Load Dimension And Facts
Apr 15, 2015I have some source tables like Customer, Order, ship, item, invoice. Among these source tables, I have to create 5 dimension tables and 1 Fact called orderFact using sql server queries just to test data. So i have created 5 dimensions and pulled dimension keys from each dimension and loaded into fact using join. For measures I have joined those 5 sources created a Rawfact table which have all measures.
Now loading into fact I have joined Rawfact with all dimensions and get keys and for measures i directly pulled from rawfact. Is this process right or we can do it by some other method?
And I want to avoid any Cartesian product for below queries. What I can do to avoid this?
Dimension:
DimCustomer, DimOrder, DimShip,DimItem, DimInvoice and Fact is FactOrder:
Loading Rawfact:
select o.ord_id, o.full_order_value,o.open_order_value,o.div_code, o.order_type_code,o.order_status,o.order_date,
s.num_of_pallets,s.num_of_cartons,s.shipment_value,s.ppd_coll,s.ship_status,
i.invoice_amt,
it.net_weight, it.gross_weight,it.warranty_days,it.item_type,it.item_num,
c.terr_code, c.largest_bal,c.last_amt_pay,c.last_inv_amt,c.num_invoice_paid,c.cust_num,
from order o
[Code] .....
SQL Server 2008 :: How To Load A Customer Database
May 26, 2015I need to load a customer database onto our SQL 2008 server. I always use restore database option in the management studio and create a new database from device (customer database backup file), it used to work just fine. But when I do the same now, I get this below error:
CREATE DATABASE permission denied in database 'master'.
RESTORE HEADERONLY is terminating abnormally.(Microsoft SQL Server,Error: 262)
I also tried to create new database option in the management studio, but get the same error. I did run management studio as 'Run as admin'.
Server - Windows 2008 R2
SQL Server 2008 R2, SP1
SQL Server 2008 :: Replication Subsystems Failed To Load
Sep 4, 2009I am running SQL 2008 Enterprize Edition with SP1 on Windows 2008. I am trying to set up replication. I have completed the following:
1. Created distribution Database
2. Created publisher
3. Granted SQL Agent access to the ...MSSQL100Com folder to execute the agent_exe files
4. Granted SQL Agent access to ...MSSQLinn where the subsystem_dll files are located
5. Granted SQL Agent write permissions to ...MSSQL
epldata in order the write the bcp files
Each time I try to initialize the snapshot, I get the following errors in the SQL Agent Log
1. Log Step.......cannot be run because the LogReader subsystem failed to load. The job has been suspended.
2. Log Step.......cannot be run because the Snapshot subsystem failed to load. The job has been suspended.
I found posts where the records in the msdb.dbo.syssubsystems pointed to different folders than where the dll and exe files are located. So, I checked that, but they are correct.
The SQL Agent has sysadmin on the SQL Server and is using a windows service account.
I believe it is a security issue because I can run the executables from the command prompt to generate the snapshot for the publication. Have I missed the forest for the trees?
SQL Server 2008 :: Load Latest CSV Files From File Server Automatically
Feb 4, 2015I need to load the latest csv files from file server , The files are placed in a folder called -
Posted 02022015- --> csv files .
I am able to copy the csv files from filserver using bulk insert (manually) , giving the file location
I am having difficulty picking up the latest folder which is posted on the server and import it into database using a stored proc .
SQL Server 2008 :: How To Load SSIS Package For Any Specific Date
May 18, 2015I have a ssis package which runs daily. This ssis package has couple of execute sql tasks which load data for yesterday's transaction. Ex.
INSERT INTO Shipped (Div_Code, shipment_value, ship_l_id, shipped_qty, shipped_date, whse_code,
ord_id, ship_id, ship_l_ord_l_id, Created_date) select ord.DIV_CODE as div_code, ship.SHIPMENT_VALUE as shipment_value, ship_l.SHIP_L_ID as ship_l_id, ship_l.SHIPPED_QTY as shipped_qty, ship.SHIPPED_DATE as shipped_date, ship.WHSE_CODE as whse_code, ord.ORD_ID as ord_id, ship.SHIP_ID as ship_id, ship_l.ord_l_id as ship_l_ord_l_id, Getdate() as Created_date from SHIP ship, ORD ord, SHIP_L ship_l where ship.SHIPPED_DATE=(dateadd(day, -1, CONVERT(VARCHAR(10),GETDATE(),120))) and ship.WHSE_CODE='WPP' and ord.ORD_ID=ship.ORD_ID and ship.SHIP_ID=ship_l.SHIP_ID
All execute sql task has query like above query. and in some query we have date filter which loads data for yesterday. Ex. one query has ship.SHIPPED_DATE=(dateadd(day, -1, CONVERT(VARCHAR(10),GETDATE(),120))). some other query has ord.trans_date=(dateadd(day, -1, CONVERT(VARCHAR(10),GETDATE(),120))). this package runs daily through sql server job, so It loads data for yesterday. Now If i want to run for any particular date, How could we achieve from ssis?
SQL Server 2008 :: Dynamic Script Error - Incorrect Syntax Near Keyword FOR
Apr 17, 2015declare @sql nvarchar(MAX)
SELECT @sql = (SELECT 'UPDATE STATISTICS ' +
quotename(s.name) + '.' + quotename(o.name) +
' WITH FULLSCAN; ' AS [text()]
FROM sys.objects o
JOIN sys.schemas s ON o.schema_id = s.schema_id
WHERE o.type = 'U'
FOR XML PATH(''), TYPE).value('.', 'nvarchar(MAX)');
PRINT @sql
EXEC (@sql)
The below Dynamic TSQL throws Error:
Error:
Msg 156, Level 15, State 1, Line 4
Incorrect syntax near the keyword 'FOR'.
USE master
GO
DECLARE @str varchar(max), @sql nvarchar(MAX), @dbName nvarchar(max);
SET @dbName = 'user_db';
PRINT N'CHECKING DATABASE ' + @dbName;
SET @sql = 'USE ' + @dbname + ';' + '(SELECT '+'''UPDATE STATISTICS ''' + '+ ' + 'quotename(s.name)'+ '+' + '''.''' + '+' + 'quotename(o.name)' + '+' + '''WITH FULLSCAN; ''' + ' AS [text()]
FROM sys.objects o
JOIN sys.schemas s ON o.schema_id = s.schema_id
WHERE o.type ' +'= ' + '''U'' FOR XML PATH('' ''),TYPE).value(''.'''+ ','+ '''nvarchar(MAX)'''+')'
Print @sql
EXEC (@sql)
Not sure, why this is an error at FOR...
SQL Server 2008 :: Syntax Error When Trying To Change Mirroring For Dedicated Network Through Specific IP
Jun 10, 2015We have a database in SQL Server 2008 R2 with mirroring and want that replication is done by dedicated network.We stop the endpoint and when we try to run the following command, syntax error occurred:
Msg 102, Level 15, State 1, Line 1
Incorrect syntax near '192.168.1.14'.
What is the correct syntax of the command line below?
ALTER ENDPOINT Endpoint_Mirroring AS TCP (LISTENER_IP = '192.168.1.14')
SQL Server Admin 2014 :: How A New Partition Function Apply For Current Data
Apr 15, 2015I have a heavy database , More than 100 GB only for six month .every Query on it takes me along time and I dont have enough space to add more indexes.by a way I decided to do partitioning. I create a partition function , on date filed and all Data records per month was appointed to a separate file.And is partitioning only for Future data entry?
View 9 Replies View RelatedSQL Server 2012 :: Fast Data Loading With Partition Switching Strategy
Jul 28, 2015I’m looking for clearity on partition switching. The idea is to use many BULK INSERT statements into table dbo.X_n in parallel and when BULK INSERT for table dbo.X_n is completed, switch dbo.X_n into dbo.bigdaddy. I think this is the fastest way to upload a couple hundred GB of data.
In learning about partition switching (in part) from The Data Loading Performance Guide under Partition SWITCH, I hear the instructions to say copy the main table exactly to become a target. But in that same step (#1), I read that we need to change the default file group of the target (dbo.X_n) from the default file group. Then it says I need to match indexes and lists the filegroup as something we need to match with the main table.
As an overview of the partition switching strategy, I think the whole point of BULK INSERT with partitioning is to have seperate files (in same group) to enable concurrent uploading where each table has its own file. Once the upload is completed to a table (dbo.X_n) then we do the partition switch into the main table (dbo.bigdaddy). The data we just uploaded doesn’t actually move, just the metadata for it.
“Don’t have the same filegroup on your target as the main table. You must have the same filegroup on your target as the main table.”
Not Able To Load The Application In Case Web Farm Garden When We Load Data Through Background Thread.
Dec 14, 2007Hi,
Here I will describe my problem.
1. We are loading large amount of data from database on background thread which is starting on Application_start event in global.aspx.cs file.The data is later cached for subsquent request to improve the performance.
2. Now when we put the application on web farm garden, it is not able to load the application.
3. We are sending the request the servers through Router kind of application.
4 This application is working fine on single server enviornment.
Please help us.
Ajay Kumar Dwivedi
Load All Data Without Knowing Old One Was Load In The Previous Time???
Apr 27, 2007I just have done the SSIS example in the tutorial document included when install SQL 2005 ENT. I have a problem that whenever I test to run, the service load all data from source with out noticing about the data (I mean it load all the data to the destination), I do it several time and it continue to load all without checking. That mean the data is dublicated when the schedule run???
I think there should be a paramete or something like that to help the engine just load the new data to the destination. Could you help please?
Thank
Verify If The Data Exist. If Not Insert If It Does Update
Jun 21, 2005Im using a store proc in SQL server.I use one table to store my hockey statistics data of each player in the league.When i submit my form i would like to check if there is any sheet of that player that allready exist .. If so then i do update.. if it does not exist i do the insert statement.Here the way i figured it out ! One store proc to do the work of the insert or update. And one to check if the player exist in the statistics table. But i just cant find a way to return a good value from my second store proc. Does my logic make sence ? any ideas ?thank you<code>create procedure Hockey_Player_UpdateForwardStatistics
@LeagueID int, @GamePlayerID int, @Games int
as
declare @PlayerID int
@PlayerID = Hockey_CheckPlayerStatistics(@LeagueID, @GamePlayerID)
if @PlayerID = 0begininsert into Hockey_PlayerStatistics( Games)values( @Games)end
ELSE
beginupdate Hockey_PlayerStatistics set Games = @Gameswhere LeagueID = @LeagueID and PlayerID = @PlayerIDend</code>
Verify Data Source Viable Before Proceeding
Feb 12, 2004I've completed my first SQL project, for which I've built a DTS Package. First thing it does it drop all records in the destination table, before importing new records from a txt file and then massaging them.
After I got done, I realized that if the data source is not available for some reason, the records will still be dropped, the process will fail, and the destination table will be left empty. In this case, leaving the existing records intact would be preferable to not having any.
How can I test that the txt file exists before dropping the records?
Thanks,
Randy
ps: Users will maintain a link to the table. I plan to update the table after business hours. If someone happens to have their linked application open while I'm trying to update the table, will it fail?
Data Load From The Different Server
Aug 21, 2007I tried to load data from the table in different server.
If I just want to limit one year data ( using date_key in that table ) then what task do I need to do that?
Please let me know.
Thanks.
Integration Services :: Load Flat Files From S3 Into 2008 R2?
May 12, 2014We have a few customers dropping files in Amazon S3. how to load this data into SQL Server 2008 R2 database using SSIS? We are 2008 R2 BIDS environment.
View 5 Replies View RelatedThe SSIS Data Flow Task Could Not Be Created. Verify That DTSPipeline.dll Is Available And Registered.
Jul 19, 2007Hi all,
We are running SQL Server 2005 Standard edition on a Vista Business machine. Whenever we try to use DTS to import or export data we get this message:
The SSIS Data Flow Task could not be created. Verify that DTSPipeline.dll is available and registered.
Of course we have explicitly registered this dll and others.
Also we reinstalled SQL Server (and did it again. And did it again).
And we did the same for Visual Studio Standard (and again).
Any ideas in this elaborate group?
Thanks,
Tjerk
SQL Server 2012 :: How To Load Historical Data From Old System Into A New One
Aug 12, 2014I want to load historical data from an old system into a new one.Thing is, that old system stored dates as Datetime and the new one uses DateTimeOffset.
All data was collected in the same Time Zone... but with the Daylight Saving Time (DST)
The offset is either +04:00 or +05:00, based on the calendar date. To add to the complexity, the rules for DST changed a couple of years ago.
To determine the offset, I'd need to know what was or would have been the server Timezone for each historical date.
Transact SQL :: Load JSON Type Data To Server
Jan 15, 2012Tried loading JSON data to Sql Server ? Sample format is given below..Don't see any easy way doing it except writing some C# code deserialize it.
[ {
"name" : "peter_2.jpg",
"createdDate" : 1259728960000,
"lastModifiedDate" : 1308174976000,
"Secondary" : [ {
"Id" : 106275817,
"Sid" : 1
[code]...
VB Web 2008, Incorrect Syntax Near 'nvarchar'
Jun 18, 2008I"ve had some issues in developing the sql server portion of my site. The issue is editing, deleting, inserting data from a form (at least from what I can understand, I'm a beginner). Below is the error. Any help I can get is greatly appreciated!
Josh
Server Error in '/WebSite4' Application.
Incorrect syntax near 'nvarchar'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Incorrect syntax near 'nvarchar'.Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[SqlException (0x80131904): Incorrect syntax near 'nvarchar'.]
System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) +925466
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +800118
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +186
System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +1932
System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString) +149
System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async) +1005
System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) +132
System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) +149
System.Data.SqlClient.SqlCommand.ExecuteNonQuery() +135
System.Web.UI.WebControls.SqlDataSourceView.ExecuteDbCommand(DbCommand command, DataSourceOperation operation) +404
System.Web.UI.WebControls.SqlDataSourceView.ExecuteInsert(IDictionary values) +447
System.Web.UI.DataSourceView.Insert(IDictionary values, DataSourceViewOperationCallback callback) +72
System.Web.UI.WebControls.FormView.HandleInsert(String commandArg, Boolean causesValidation) +388
System.Web.UI.WebControls.FormView.HandleEvent(EventArgs e, Boolean causesValidation, String validationGroup) +602
System.Web.UI.WebControls.FormView.OnBubbleEvent(Object source, EventArgs e) +95
System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +35
System.Web.UI.WebControls.FormViewRow.OnBubbleEvent(Object source, EventArgs e) +109
System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +35
System.Web.UI.WebControls.LinkButton.OnCommand(CommandEventArgs e) +115
System.Web.UI.WebControls.LinkButton.RaisePostBackEvent(String eventArgument) +132
System.Web.UI.WebControls.LinkButton.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +177
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1746
Equivalent Of Load Data Infile Of MySQL In SQL Server 2005?
Aug 1, 2007hey all,
i want to know Equivalent of Load Data Infile of MySQL in SQL Server 2005?
in mysql we can direclty load file with Load Data infile query.
my question is how to do this in sql server 2005?
thanks.
SQL Server 2008 :: Function To Replace Data In A Column With X Based On LEN Of Data
Sep 4, 2015I need to create a function that replaces the data in a column with an 'X' based on the LEN of the data in the column. I created one that does a replacement, but it fills the column based on the max data length, and not the current length of the string or integer. An example of what I'm trying to accomplish.
Original data in a varchar(30) column:
thisisavalue
thisisanothervalue
thisisanothervalueagain
shortval
replaced with
xxxxxxxxxx
xxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxx
xxxxxxx
My current function is replacing the data like this:
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
How To Verify If SQL Server Is Installed
Apr 1, 2008
Hi, guys,
I've to build a program that verify if SQL Server is installed. How can I verify that?
Thanks in advance.
Vagner