SQL Server 2008 :: What Happens When The Xact Log Fills Up
May 5, 2015
how SQL handles a full transaction log. I'm running a population of a temp table with a lot of rows (roughly 70M), and when I run dbcc sqlperf(logspace) it says 99% of the tempdb log is full. It doesn't throw an error so is it still working? Does it have to do some sort of disk/memory swapping of the transaction log? Is occasionally filling-up of the xact log ok? Or is it something that has dire consequences for other operations as well?
View 3 Replies
ADVERTISEMENT
May 30, 2007
Hello,
I have the following problem:
I'am running SQL Server 2005 Express Advanced Services on a Windows 2003 Server in a hosted Environment. Some times SQL Server is beginning writing entries into C:ProgrammeMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG until the disk is full.. After that, I have to delete the error log file (some GB of size), restart the server and everything is running fine until the log file runs amok again.
I have installed SQL Server Management Studio.
With SQL server 2005 Standard I can configure or disable Error logging in the Management Studio. But with the Express Edition it seems that is not possible.
What I want to do is (maybe with system stored procedures)
limit number of error log files by cycling it, e.g. 5 files and delete the old ones
limit the size of one log file. e.g. 100 MB
Is there an option to configure this in the Express edition of SQL Server 2005?
Thanks in advance
Regards
Rolf
View 9 Replies
View Related
Oct 1, 2015
I understand that we shouldn't shrink data files as it might cause heavy fragmentation along with log usage, high IO/CPU etc.
In a DB in which lot of DML transaction occur, there will be empty spaces whenever deletions occur.
Will SQL Server fill that part with data when new insertions occur ?.
View 4 Replies
View Related
May 10, 2007
I'm trying to do a very large delete. I set the db to simple mode thinking that the Trans Log will not fill during the delete.
But it does still fill. I thought if you used simple mode the logs are not used?
Any thoughts?
View 1 Replies
View Related
May 10, 2007
I'm trying to do a very large delete. I set the db to simple mode thinking that the Trans Log will not fill during the delete.
But it does still fill. I thought if you used simple mode the logs are not used?
Any thoughts?
View 5 Replies
View Related
Apr 9, 2008
Does anyone know what would cause my log file (.LDF) to grow at a rate of over 1MB per second and quickly fill up the hard drive? I could use a quick answer on this. My experience is in Oracle but I'm assuming you can set the maximum size for a log file for starters? Not sure why it would be growing at this rate anyway though. I could use some quick answers on this one. Thanks!
View 4 Replies
View Related
Mar 31, 2008
When I run an SSIS package that moves up to 2 GB of data from an ODBC source (FoxPro) to SQL Server a large temp file is created at:
c:Documents and SettingsusernameLocal SettingsTemp1filename.tmp
where username is obviously my domain user name, and filename is a seemingly random filename.
My C drive has limited space, but I have other local drives with plenty of space. Can I dictate where these temp files are created?
Thanks,
Chris
View 7 Replies
View Related
Jun 22, 2007
I have SSIS sp2 running on a Win2003 64bit Server with 4processors and 16GB of ram. I am trying to load 1 billion rows of data into 10 tables. The source data is found in 12 different 50GB fixed width flat files stored on 2 different files servers. The destination is 10 different tables in a single SQL Server 2000 database which has 1TB of space allocated to it. I use the MS SQL OLE DB connection for each destination table.
The SSIS package is pretty straight forward. Everything takes place in 1 data flow. The 12 sources each flow through 12 different Row Count Transformations into a single Union All Transformation. From the Union All transformation the data goes into another Row Count Transformation then into a Conditional Split Tranformation. The data is split into 10 streams base on the last digit of one of the ID fields in the data. The 10 streams are fed to the 10 destination tables.
Every time I run the package (Start without Debugging) the avaible physical memory goes from around 15GB to 0 in about 2 minutes. The % comitted bytes in use goes from 5% to 100% in about 5 minutes. Once at 100% it will stay there for around 5 minutes before it will finally give me the following error message:
The system reports 98 percent memory load. There are 17178939392 bytes of physical memory with 189382656 bytes free. There are 8796092891136 bytes of virtual memory with 8742748930048 bytes free. The paging file has 54388109312 bytes with 16056320 bytes free.
This message is followed by a bunch of other messages:
SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Union All" (2073) failed with error code 0x8007000E. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread1" has exited with error code 0x8007000E. There may be error messages posted before this with more information on why the thread has exited.
The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "Dr 2" (663) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
...
SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "Dr 3" (898) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread2" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited.
I have tried adjusting the Engine threads down from 5 to 4 to 2. I have tried adjusting the FastLoadMaxInsertCommitSize from 1000000 to 100000 to 1000 (Destinations are tablocked and Check Constraints). I have tried moving the DefaultBufferMax up to 16500 and down to 2000.
Nothing works. The package fails everytime within 20 minutes of its start.
I would prefer not to have to rewrite the package and process each file sequentially as that would take forever.
Any ideas would be greatly appreciated.
Thanks.
-Scott
View 5 Replies
View Related
Nov 1, 2007
I currently have a SQL backup process that backs up my databases via the network to a backup hard drive on a separate system. I recently began getting strange issues with my backup process in which it continually writes to the backup drive until the drive fills up and then the job fails. I also noticed that when I kill the job on the host server, the backup file drops to the normal file size. The normal file size is 300 GB but it has grown to over 400GB. I looked at various logs and even performed several backup tests with success.
I am trying to figure out if this is a known SQL Server issue or an issue with the OS?
specs:
windows 64bit/sql server 2k5 64bit
Thanks in advance for the help.
View 5 Replies
View Related
Aug 14, 2014
I have this query I need for a report. Originally it was 4 queries to be used in Crystal Reports. Now I want to create the same report with SSRS and therefore I incorporated all queries in one in order not to use subreports [URL].....
Tempdb fills up to nearly 90 GB. I am running SQL Server on a local box, so I am sure there is no other traffic. Here is the query:
SELECT AdHaupt.NSprache_ID
,AdHaupt.mengentext AS mengentextHaupt
,AdHaupt.Einzelpreis
,AdHaupt.Anzeigebezeichnung
,AdHaupt.Gesamtpreis
[Code] ...
I ran it with TOP 10 as well, just to see if it will finish at all, but it never did (ran for an hour now).
View 9 Replies
View Related
May 10, 2006
Hi,The tempdb file on one of our servers grew very large and used allavailable disk space. This is SQL Server 2000 SP4. I have installedhotfix version 8.00.2187. I opened a profiler trace but can't still getto the root of the problem. Any help will be appreciated.Egbon*** Sent via Developersdex http://www.developersdex.com ***
View 1 Replies
View Related
Dec 21, 2007
I am amazed to see this morning that log file consuming whole disk space even though the database is in simple recovery mode.
What could be the reasons to fill in the space even in simple recovery mode??
View 10 Replies
View Related
Mar 31, 2008
There are a few features in the new SQL Server - Reporting Services that I really need in production. I have tested everything and it works great. I am running the CTP version since Microsoft is saying they aren't releasing the release version until 3rd quarter 2008.
Since Microsoft won't sell SQL 2008 until 3rd quarter, can I run the CTP in production until the release and then purchase SQL 2008?
Jim
View 1 Replies
View Related
Apr 23, 2008
Hello - does anyone have experience w/SQL Server 2005 in a virtual environment? I'm considering this for a production environment but not sure if performance will suffer. Our databases will have a lot of writing but not too much reading. A SSRS solution is currently the only app. connecting to the SQL db. Max users to server at any given time will be very low (~10 users max). But the databases are pulling in data from other, outside multiple data sources on a daily basis.
Any pointers to documentation or any advice?
Thanks,
A Brown
View 1 Replies
View Related
Feb 25, 2008
Hello!
Recently, I set up server with Windows Web Server 2008 RC1, SQL 2008 Express beta, .NET 3.5, IIS 7.
I'm running ASP.NET web application with SQL database. Everything works fine until the first application state on the server expires. After that, any postback that starts a new application state on the server and connects to the database, results in the following error:
Failed to generate a user instance of SQL Server due to a failure in starting the process for the user instance. The connection will be closed.
Is this a bug that will be fixed in release of Windows / SQL or am I doing something wrong?
Many thanks for help,
Jan
View 1 Replies
View Related
Mar 7, 2008
Hi all,
New to this so please be patient and please help.
I have developed an SQL 2005 Express command line option install for our company which has been working seamlessly for the last 18 months.
http://msdn2.microsoft.com/en-us/library/ms144259.aspx
I downloaded the €śMicrosoft SQL Server 2008 Express CTP, February 2008€? from http://www.microsoft.com/downloads/details.aspx?FamilyId=749BD760-F404-4D45-9AC0-D7F1B3ED1053&displaylang=en
I simply replaced the 2005 file €śSQLEXPR.EXE€? with the 2008 file €ś€?, recompiled the installation and tested only for it to fail. I than read the 2008 books online and noted the change in command line options.
http://www.microsoft.com/downloads/details.aspx?familyid=19DB0B42-A5B2-456F-9C5C-F295CDD58D7A&displaylang=en
http://msdn2.microsoft.com/en-us/library/ms144259(SQL.100).aspx
I then changed the command line to suit the Microsoft 2008 books online, recompiled the installation and tested only for it to fail once more.
Interestingly I tested the install from the default GUI and at the point of adding the €śsa€? login credentials it fails to allow the installation to proceed. Strangely by selecting the windows authentication credentials, €śnext€? than €śback€? it now allows me to add the €śsa€? login credentials and continues to install correctly as required.
I hope I have explained this clearly enough.
1. Is this a bug in the €śMicrosoft SQL Server 2008 CTP, February 2008€? installation?
2. If so is this causing the command line install options to fail?
3. How do I obtain a version of €śMicrosoft SQL Server 2008 Express€? that will work installing from the command line?
Thanks in advance.
View 1 Replies
View Related
Jan 4, 2013
if you can restore a database to Server B using Server A as the service. Meaning we would issue the command on Server A but somehow point to Server B as where we want the restore to happen.
The backup file would be in a location independent of both servers.
View 4 Replies
View Related
Apr 15, 2008
Hi all,
Please tell me about difference between SQL Server 2005 and SQL Server 2008 SSRS(Sql Server report)
Why to upgrade for Sql Server 2008
Thanks,
Ashok
View 3 Replies
View Related
Dec 23, 2007
when I try to make a sqldatasource with visual studio 2008 and SQLServer 2008 . I found that there are a message that the visual studio 2008 can support only SQLServer 2005 and SQLServer 2000how to make my visual studio 2008 support SQLServer 2008
View 1 Replies
View Related
Jul 7, 2015
I have two calls to stored procedures that in an SSIS package fails silently. They are simply not executed in production but works fine in test, nothing happens and the sql server agent reports that everything has gone just fine.
In test they have 1 server with db A and B. No issue here.
In prod they have 2 servers with db A and B. On server 1 sql server agent executes a job that includes an SSIS package that on server 2 runs a couple of sp's. That user is db owner on server 2 db B and yet nothing happens. The sp's are not executed.
If I in prod run the job manually then it works, but not when run with the sql server agent account that as said is even db owner.
View 2 Replies
View Related
Aug 26, 2007
I have a question about a problem that I cannot seem to tackle. I have installed the following programs on Windows Vista:
- SQL Server 2005
- Visual Studio 2008
- SQL Server Compact Edition 3.5
- SQL Server Compact Edition 3.5 Server Tools
I want to do the following:
1. I want to create a SQL Server Compact Edition 3.5 database in the SQL Server Management Studio
2. I want my SQL Express server in SQL Server 2005 to be a distributor and publisher
About 1. In SQL Server Management Studio I cannot choose SQL Server Compact Edition 3.5 .
ABout 2. I tried to setup my server to be a distrubutor by running a stored procedure with the following name: sp_adddistributor. I get the following error: This edition of SQL Server cannot act as a Publisher or Distributor for replication.
Does anyone have a solution to both problems.
View 1 Replies
View Related
Jun 20, 2008
1) I can't get the 'copy database' function to work from SQL Server 2008 to SQL Server 2005. I connect ok. Everything goes to the last step and then it fails.2) I cant get a SQL server 2008 backup to restore on SQL SEerver 2005 either.
The only way I know that works is to script the creation of all tables then export and import. This does work.
How can I get the 'entire' database, structure and data, from 2008 to 2005?
ThanksSQL newbie.
View 2 Replies
View Related
Feb 4, 2015
I need to load the latest csv files from file server , The files are placed in a folder called -
Posted 02022015- --> csv files .
I am able to copy the csv files from filserver using bulk insert (manually) , giving the file location
I am having difficulty picking up the latest folder which is posted on the server and import it into database using a stored proc .
View 2 Replies
View Related
Feb 18, 2015
Production and development servers are on different domains and they do not trust each other. How do I import data from the table t1 from a database db1 in production and load it into table t1 inside database db1 in development?
View 3 Replies
View Related
Feb 23, 2015
I have the linked server connection created and works perfectly well. I mean I am able to see the tables while I am on my database.
how do I write a SQL statement to reference the linked server ?
I tried the following:
Select top 100 * from casmpogdbspr1.MPOG_Collations.dbo.AsaClass_Cleaned
Then I get the error message....
Msg 7314, Level 16, State 1, Line 1
The OLE DB provider "SQLNCLI10" for linked server "casmpogdbspr1" does not contain the table ""MPOG_Collations"."dbo"."AsaClass_Cleaned"". The table either does not exist or the current user does not have permissions on that table.
View 2 Replies
View Related
Apr 16, 2015
Using a 32-Bit SQL Server 2008 Express on my LOCAL PC. I downloaded the Advantage 8.1 OLE DB Provider and created a linked server to a REMOTE Advantage 8.1 database server. There is no data dictionary on the Advantage server.
Here is my linked server:
EXEC master.dbo.sp_addlinkedserver @server = N'1xx.1xx.xx.1xx', @srvproduct=N'Advantage', @provider=N'Advantage OLE DB Provider', @datasrc=N'1xx.1xx.xx.1xxeccET', @provstr=N'servertype=ads_local_server;tabletype=ads_cdx;'--tabletype=’ADS_ADT’ (this test works too)
EXEC master.dbo.sp_addlinkedsrvlogin @rmtsrvname=N'1xx.1xx.xx.1xx',@useself=N'False',@locallogin=Null,@rmtuser='adssys',@rmtpassword=Null
Testing the link succeeds with above. Using “ads_REMOTE_server” instead of “ads_local_server” and the test fails. Here is my problem, using the following queries will not work. Perhaps it’s a permissions issue? When I specify my local credentials for the remote server in the linked server it still does not work.
SELECT * FROM OPENQUERY([1xx.1xx.xx.1xx], 'SELECT * FROM ActType')
OLE DB provider "Advantage OLE DB Provider" for linked server "1xx.1xx.xx.1xx" returned message "Error 7200: AQE Error: State = HY000; NativeError = 5004; [Extended Systems][Advantage SQL][ASA] Error 5004: Either ACE could not find the specified file, or you do not have sufficient rights to access the file. Table name: ActType SELECT * FROM ActType".
Msg 7321, Level 16, State 2, Line 2
An error occurred while preparing the query "SELECT * FROM ActType" for execution against OLE DB provider "Advantage OLE DB Provider" for linked server "1xx.1xx.xx.1xx".
View 0 Replies
View Related
Sep 4, 2015
A recent SharePoint upgrade has rendered several views obsolete. I am redefining them so that our upper level executive reports show valid data.(yes, I know that doing anything to sharepoint could cause MS to deny support, having said that, this is something I've inherited and need to fix, pronto) The old view was created like so:
USE [AHMC]
GO
/****** Object: View [dbo].[vwSurgicalVolumes] Script Date: 09/04/2015 09:28:03 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE VIEW [dbo].[vwSurgicalVolumes] AS
SELECT
[code]....
As I said, this view is used in a report showing surgical minutes.SharePoint is now on a new server, which is linked differently (distributed?) I've used OPENQUERY to get my 'new' query to work;
SELECT *
FROM OPENQUERY ([PORTALWEBDB], 'SELECT
--AllLists
AL.tp_ID AS ALtpID
,AL.tp_WebID as altpwebid
,AL.tp_Title AS ALTitle
[code]....
My data (ie surgical minutes, etc) seems to be in the XML column, AUD.tp_ColumnSet . So I need to parse it out and convert it to INT to maintain consistency with the previous view. How do I do this within the context of the view definition?Here is a representation of the new and old view data copied to excel :
<datetime1>2014-08-14T04:00:00</datetime1><float1>2.000000000000000e+000</float1><float2>4.190000000000000e+002</float2><float3>1.600000000000000e+001</float3><float4>8.110000000000000e+002</float4><sql_variant1 xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:sqltypes="http://schemas.microsoft.com/sqlserver/2004/sqltypes"
[Code] ....
can't format it to make it look decent. InHouseCases =2, InHouseMinutes=419, OutPatientCases =16, OutPatientMinutes=1230. This corresponds to the new data I can see in the XML column; 2.000000000000000e+000 is indeed 2 and 4.190000000000000e_002 is indeed 419.
View 4 Replies
View Related
Sep 18, 2015
we are having the same code base in both the environment but we have different version of SQL Server Version(Env 1 - SQL 2012, Env 2 - SQL 2008). We are getting the expected result in Env - 1 but not in the ENV -2. So we tried to get the SQL trace for the web request we found that Date format getting changed.
2012 - Date Format in the SQL Trace for the request '2015-09-10 00:00:00' which is working as expected.
2008 - Date Format in the SQL Trace for the request 'Sep 10 2015 12:00:00:000AM' which is Not working.
Complete SQL Trace for Request.
Evn - 1 - SQL Server 2012
exec dbo.usp_GetWorkQueue @ClientName='CLT',@HasFilter=1,@FacilityName='',@StartDate='2015-09-10 00:00:00',@EndDate='2015-09-18 00:00:00',@OrderDirection='D',@StartIndex=1,@PageSize=20
[code]...
View 3 Replies
View Related
Apr 3, 2008
Hi All,
After I installed sql server 2005 64bit standard edition on Windows Server Enterprise 2008 64bit, I cannot connect to the sql instance using the sql management studio on the same machine!
I verified that:
service is running,
in surface area configuration: remote connections to local and remote are enabled, for TCP/IP and named pipes.
ran the command netstat -avn| findstr 49279 to make sure that the server is listening.
firewall is off, but this does not matter since I'm connecting locally to local instance
I'm using domain controller account to login to sql server / also tried the sa account.
what else can be wrong?
thanks.
View 4 Replies
View Related
Mar 12, 2008
Does anyone know how to properly install SQL server 2005 express reporting services on windows server 2008. When ever i try to access the report manager I get an error "Cannot access the remote server" even though the report server is on the local machine. I only have the web server role installed on the server. Im still quite a newbie at managing servers so please keep it as simple as possible.
Thanks
Matthew
View 2 Replies
View Related
Feb 1, 2012
I am task with identifying the source database name, id, and server name for each staging table that I create. I need to add this to a derived column on all staging tables created from merging same tables on different servers together.
When doing a Merge Join, there is no way to identify the source of data so I would like to see if data came from one database more than the other servers or if their are duplicates across servers.
The thing that bugs me about SSIS Data Flow task is there is no way to do an easy Execute SQL Task after I select my ADO.NET Source to get this information because my connection string is dynamic and there is no way of know which data source is being picked up at runtime.
For Example I have Products table on Server 1 and 2:
Server 2 has more Products and would like to join the two together to create a staging table.
I want see the following:
Product ID, Product Name, Qty, Src_DB_ID, Src_DB_Name, Src_Server_Name
1 IPAD 1000 2, MyDB1, Server1
100 ASUS Pad 40 1, YourDB, Server2
get database name and server name in DATA FLOW only (without using a for each in Control Flow)
View 5 Replies
View Related
Feb 16, 2015
Is it possible to view the Connection String information of a remote login/session? I want to know if the login is looking-up the database server via IP address, servername (NetBIOS name) or fully-qualified domain name (FQDN).
Using these DMVs I can get a lot of relevant information:
sys.dm_exec_sessions
Program Name (eg. Microsoft SQL Server Management Studio),
Client Interface Name (eg. .Net SqlClient Data Provider)
sys.dm_exec_connections
Net Transport (eg. TCP),
Client Net Address and TCP Port
but not how the server's IP address was resolved. Is the connection string ever sent by the client to the server, or just used for DNS lookup?
View 0 Replies
View Related
Apr 21, 2008
Hi,
Is it possible to install SQL Server 2005 Eval on a Virtual PC 2007
client running Server 2008 Beta? Nothing says it isn't possible, it
says I need to service pack it right away, but before it gets started
it comes up with the error 'sqlcu.dll failed to load'. Anyone know
what this is all about?
Any ideas?
Any help would be appreciated.
Thanks!
View 1 Replies
View Related
