Automated and manual backup done through SQL Management console are failing with error 23 - redundancy check failed.
This is a critical production db. Other db in same instance backs up ok.
Is there a way to fix this?
I was trying to modify a table and I got a "data error: cyclic redundancy check"
So I ran a DBCC CHECKDB and got this:
Server: Msg 823, Level 24, State 1, Line 3
I/O error 23(Data error (cyclic redundancy check)) detected during read of BUF pointer = 0x11c902c0, page ptr = 0x14d66000, pageid = (0x1:0x3d), dbid = 26, status = 0x801, file = d:MSSQL7datacontent_Data.MDF.
Connection Broken
This is scary stuff! What does it mean and how do I fix it?
I am getting the following message when trying to run the below sql
Msg 245, Level 16, State 1, Line 15
Conversion failed when converting the varchar value 'Select COUNT(*) From Adventures.dbo.tblLibrary' to data type int.
Declare @Datestart as Date
Declare @CntBefore as int
Declare @CntNow as int
Declare @Database as varchar(30)
Declare @TableName as varchar(60)
[Code] ....
Hi,
I am administering several SQL Servers running SQL Server 2005 SP2 Build 3042.
I have a common maintenance plan that runs on each of the servers. The maintenance plan runs
fine on all the servers except for one. On the one server the Database Integrity check fails with the following error:
Check Database integrity on Local server connection
Databases: <list of databases>
Include indexes
Task start: 2008-02-21T00:05:42.
Task end: 2008-02-21T00:05:46.
Failed0) Alter failed for Server €˜XYZ€™
I created a test maintenance plan to just do the integrity check and selected one database only and this also failed with the same error message. I ran this test maintenance plan and configured it for each of the databases in question and it failed each time.
If I run the DBCC manually against the databases they all report fine.
I read some of the post that talked about the €œAllow Updates€? being set incorrectly but that does not apply to my problem since my configured and run values are set to 0.
Does anyone know what the problem could be?
Hi i have installed sql server 2000 on xp window and facing error of connection failed, check sql server registration what it mean pleas guide me.
webmaster http://www.GlobalGuideLine.com
Our database crashed this morning and went into recovery mode.how I can track the progress of the recovery to determine how long it might take?The error log shows that it started up all the databases, then shows the recovery messages fr the msdb database, then shows that sql server is ready for client connections. I don't see any messages about my database recovery or the number of transactions to roll forward or background. If i run the sys.sp_readerrorlog and search for my database name, the only line returned is the starting up database message.
I do expect the database to take a while to recovery as it is about 8TB, there is plenty of free disk space about 3TB.The database started recovery while a transaction log backup was running so that backup failed,the last transaction log backup was taken 2 hours before recovery started. The last full backup completed about 5 days ago. The transaction log backup occurs every 2 hours and is typically around 16GB.
whenever I use the below script, it throws the below error.
declare @DbFilePath VARCHAR(max)
set @DbFilePath = ' c:mdndndmmnsn'
if object_id('tempdb.dbo.#fileExist') is not null
drop table #fileExist
[Code] ....
Msg 0, Level 11, State 0, Line 0 A severe error occurred on the current command. The results, if any, should be discarded.
i have 70 SQL database servers and i setup DB Mail on the 70 Servers, i want to know is there a way to find the status of all the jobs which i assigned the DB Mail and if its working/failing... is there a script i can run on powershell or SQL to find out that information
View 1 Replies View RelatedI am working now on optimization of an update query for a particular table and I want to measure the number of page splits after each update. How to check it?
View 6 Replies View RelatedI have groups of records in a table, and I would like to set a necessary condition on each group. The condition is that EXACTLY ONE of the records in each group has a flag field set to True (bit = 1). I can naturally write triggers for update, insert and delete events that test for such a condition.
Something along the lines of this condition:
(select count(ClovekAutoID)
from TableOfClovekNames tCN
where JeHlavni = 1
group by ClovekAutoID
having COUNT(JeHlavni ) > 1) = 1In fact,
I tried this just on whim, but naturally, the SS engine told me to go roll my hoop, that subqueries are not allowed in constraint expressions.
I have to figure out the items that Legal Name implies individual but Legal Entity Structure indicates a incorporation type. In this sample, you can see Alexander, Justin N. is my target. But my problem is how should I use a query to figure out which one is a individual's name? How should I write a function to check the name format (Last, First Middle)?
Legal Name ////////////////////////////////////// Legal_Entity_Struct
S & H Farm Supply, Ltd.////////////////////////////Company
F.M.Abbott Power Equipment,Co.///////////////Company
Ray's Dixie Chopper, Inc.////////////////////////// Company
Alexander, Justin N. ///////////////////////////////// Company
Alameda Power Equipment, Inc.//////////////// Company
[Code] .....
I queried sys.databases in one of the sql server and found "is_encrypted" is "1" for four of the databases.
Does that mean that all those 4 DBs are encrypted ?
How to check if the database itself is encrypted or only the backups ?
Note :- I can see backups of key in a particular folder.
I have a table of languages, identified by a lang_id column as follows:
LANG_IDLANG_NAME
deDeutsche
enEnglish
plPolski
trTurkish
czCzech
I also have a RESOURCES table of phrases (for translation purposes) similar to this:
res_id res_lang res_phrase
AccessDenied en Access Denied
For some rows in the resources table I do not have all language codes present so am missing some translations for a given res_id.My question is what query can I use to determine the RESOURCE.RES_IDs for which I do not have a translation for.
For example I might have a de, en, cz translation for a phrase but not a pl phrase and I need to identofy those rows in order that I can obtain translations for the missing RESOURCE rows.
I'm trying to run a query to check the downtime in production lines, but if a line has assigned more than one cause for the downtime it repeat the info for each cause.
This is the code.
SELECT D.Line AS Line, D.ProductionLine AS ProductionLine, D.Shift AS Shift, D.DownTime, CONVERT(VARCHAR(10), D.DatePacked,101) AS DatePacked, AssignedDowntime, (D.DownTime - AssignedDowntime) AS NOASSIGNED,
R.Enviromental,R.Equipment, R.IT_Systems, R.Material_External,R.Quality,R.Material_Internal,
R.Method,R.PreProduction,R.People
FROM (
SELECT Line, Shift, DatePacked, SUM(Cast(Downtime AS INT)) AS AssignedDowntime,
[Code] ....
I'm expecting that if is more than one "Down Reason "it will include in the same line. At this moment if i have more than one reason it create a line for each one for example:
If i have a total Downtime of 50 minutes and they are assigned 10 for itequipment, 30 by testequipment and 10 assigned to quality issues i will have and output like this:
Line Total_Downttime By itequipment by_testequipment bypeopleissues byquality
line1 50 0 30 0 0
line1 50 10 0 0 0
line1 50 0 0 0 10
What i want is to have a output like this:
Line Total_Downttime By itequipment by_testequipment bypeopleissues byquality
line1 50 10 30 0 10
All in one line.
I need to create a script task in sql server 2008 R2 to check if a file exists in a directory. For example, to see if output.dat exist under c:results. If the file exists, then send out an email stating the file exists, if not then send out another email stating the file does not exists.I noticed there is a huge difference between the script task in sql 2005 and sql 2008 r2.
View 3 Replies View RelatedHow can we monitor the all tables in all databases and send notifications to the team.Is there a way to check to find the no of rows and size of a table last month and find out growth % now
View 4 Replies View RelatedHye all, running WHS 2008, I try to install SQL Server 2005 with reporting services, but on install, in "components to install" wizard, the reporting services box is hided. I can't check this box :/ Do you know whats wrong ? if anyone knows the problem, thanks in advance.
View 1 Replies View RelatedMany a times see the below error in SQL Error log.
Login failed for user 'NT AUTHORITYANONYMOUS LOGON'. Reason: Token-based server access validation failed with an infrastructure error. Check for previous errors. [CLIENT: ]
Is this something to do here?
Note: If I run the below statement I know that the SQL Error log entry will go off, but wanted to know the real significance of this error?
CREATE LOGIN [NT AUTHORITYANONYMOUS LOGON] FROM WINDOWS
Declare @specificDB nvarchar(max) = 'AdventureWorksDW2012'
,@tablename nvarchar(max) = 'DimAccount'
declare @localtab INT
SET @localtab = (SELECT Convert(INT,('select count(*) from ' + @specificDB+'.'+'INFORMATION_SCHEMA.Tables WHERE TABLE_TYPE = ''BASE TABLE'' AND Table_name = ' + @tablename)))
Print @localtab
Print @localtab
----
Msg 245, Level 16, State 1, Line 8
Conversion failed when converting the nvarchar value 'select count(*) from AdventureWorksDW2012.INFORMATION_SCHEMA.Tables WHERE TABLE_TYPE = 'BASE TABLE' AND Table_name = DimAccount' to data type int.
We have a maintenance plan that reorganize all indexes in a database. We disabled one of the index on one table this job failed. How to set up to the maintenance plan to without failing to ignore the reorganizing of disabled indexes?
View 1 Replies View RelatedI am running SQL 2008 Enterprize Edition with SP1 on Windows 2008. I am trying to set up replication. I have completed the following:
1. Created distribution Database
2. Created publisher
3. Granted SQL Agent access to the ...MSSQL100Com folder to execute the agent_exe files
4. Granted SQL Agent access to ...MSSQLinn where the subsystem_dll files are located
5. Granted SQL Agent write permissions to ...MSSQL
epldata in order the write the bcp files
Each time I try to initialize the snapshot, I get the following errors in the SQL Agent Log
1. Log Step.......cannot be run because the LogReader subsystem failed to load. The job has been suspended.
2. Log Step.......cannot be run because the Snapshot subsystem failed to load. The job has been suspended.
I found posts where the records in the msdb.dbo.syssubsystems pointed to different folders than where the dll and exe files are located. So, I checked that, but they are correct.
The SQL Agent has sysadmin on the SQL Server and is using a windows service account.
I believe it is a security issue because I can run the executables from the command prompt to generate the snapshot for the publication. Have I missed the forest for the trees?
I have an issue with DBCC Check DB maintenance plan . I run it in my production last nite.
After running for 1 hour , the package failed ( the step failed )
As below :
Executed as user: ETSPDCSQL1-VWSYSTEM. ....0.5500.0 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 22:06:13 Progress: 2015-09-08 22:06:14.11 Source: {F0BABEC1-ECBF-4B7D-86BE-7C2C99A08ED8} Executing query "DECLARE @Guid UNIQUEIDENTIFIER EXECUTE msdb..sp...".: 100% complete End Progress
[Code] .....
I have inherited a server on which is a maintenance plan with two subplans on different schedules. In each subplan there are Execute T-SQL tasks with scripts for index rebuilds. Each task is set up with a Completion arrow to the next task and a Failure arrow to a Notify Operator Task. I was asked to add a task for index rebuilds to a specific subplan for a specific database, which is what the other tasks also do. I discovered that my task was failing but the others were fine. No notification was sent about my task failing even though the job is marked in MSDB as a failed job. I have sent a test email using the "Send Test Email..." option when right clicking Database Mail in SSMSand I receive an email so I know Database Mail works.
I set up a test job to model the index job that I can't get notifications from. I have two T-SQL tasks that just select the top row from a small table. The first task has a syntax error that I did so it would fail. I have a failure arrow to a Notify Operator Task and a Completion arrow to another T-SQL task with no syntax error which has a Success arrow to a Notify Operator task. As expected, when I execute this job I receive one failure email and one success email.
The only other troubleshooting step I know to try is to add a Notify Operator task before my failing task. That Notify Operator task will hopefully fire to tell me that the previous step was successful. I am not having problems with the other steps so I was just thinking I would try to get the subplan to send me a success email about one of the steps that has been working fine.
DB-Library Error 10007: General SQL Server error: Check messages fromthe SQLServer.CREATE PROCEDURE [dbo].[spu_Import_Export_Image](@srvr varchar(50),@db varchar(50),@usr varchar(15),@pwd varchar(50),@tbl varchar(50),@col varchar(50),@mod varchar(1),@imgpath1 varchar(1000),@pk varchar(50))ASBEGINdeclare @path varchar(50)declare @whr varchar(200)declare @fil varchar(100)declare @cmd varchar(1000)declare @imgpath varchar(800)declare @ext varchar(5)--declare @pk varchar(50)declare @KeyValue varchar(8000)declare @image varchar(50)--declare @imgpath1 varchar(1000)declare @imgpath2 varchar(1000)declare @sellist varchar(2000)set @path = 'c: extCopy.exe'select @sellist = 'DECLARE curKey CURSOR FOR SELECT ' + @pk +' FROM '+ @tbl + ' ORDER BY ' + @pkexec (@sellist)OPEN curKeyFETCH NEXT FROM curKey INTO @KeyValueWHILE (@@fetch_status = 0)BEGINset @whr = '"where '+ @pk +' = "' + @KeyValueset @fil = @imgpath1 + '' + @KeyValue --+ @extset @cmd = @path + ' /S ' + @srvr + ' /D ' + @db + ' /U ' + @usr+ ' /P ' + @pwd+ ' /T ' + @tbl + ' /C ' + @col + ' /W ' + @whr + '/F ' + @fil+ ' /' + @modexec Master..xp_cmdShell @cmdFETCH NEXT FROM curKey INTO @KeyValueENDCLOSE curKeyDEALLOCATE curKeyENDGOAbove srcipt runs fine with image data type in one table but when irun for some other table it gives me Error MessageTEXTCOPY Version 1.0DB-Library version 8.00.194SQL Server 'WSQL01' Message 170: Line 1: Incorrect syntax near '99'.(Concerning line 1)DB-Library Error 10007: General SQL Server error: Check messages fromthe SQLServer.ERROR: Could not use database 'test1'NULL-----------Aslo it only runs on server console if i run it from workstation uingsame files and tables it gives me an error again. Can anybody help meand reply me at Join Bytes! asap.thnx,dharmesh
View 1 Replies View RelatedI have an very long ntext field, made up of many sentences that I append a full stop to every one, I also strip out any line breaks within the text. However I get this error, when I look it up it comes up with "Failed to locate the ending boundary of a sentence."
View 0 Replies View RelatedI have a pretty simple SSIS package that fast loads a 100 million record table into a SQL Server 2008 table on a daily basis. This normally runs fine and completes in about 1 hour. As this is perhaps one of our largest running SSIS packages, about once every 2-3 weeks this SSIS will fail/drop connection. Once it fails, the large number of records will start rolling back. This rollback process can take 1+ hours so I cannot even restart the failed SSIS package immediately. This is a problem.
I am looking for a solution or option so I do not have to wait on that rollback to restart this particular, long running SSIS package. Is there an option/setting to leave the partial data set committed and not rollback? Then I could just restart the SSIS package immediately or set it the SSIS to auto-restart 1 time on failure. The first step in the SSIS does a truncate of the destination table.
Hi,
I am trying to create a linked server between 2 SQL Server 2005 boxes.
When I create the linked server I specify a login for the connection.
The strange part is that I get the following error when it goes to test the connection:
The test connection to the linked server failed
Login failed for user 'Domainuser'. (Microsoft SQL Server, Error: 18456)
I can use the SQL mangement studio to conenct to the database using this same login.
The login has all the server roles assigned to it also.
Can anyone shed some light as to what may be the problem?
Thanks,
Hi
I am a SAP Basis Administrator. One of the job has failed miserably that deals with the MSSQL database.
The error message is been pasted below:
Executed as user: NT AUTHORITYSYSTEM. ...ile: C:Program FilesMicrosoft SQL ServerMSSQLCCMS_CHEC
K_DB_HIST_2007.txt [SQLSTATE 01000] (Message 50000
) Table error: Object ID 0, index ID 0, page (1:2
881160). Test (m_headerVersion == HEADER_7_0) fail
ed. Values are 0 and 1. [SQLSTATE 42000] (Error 89
39) Table error: Object ID 0, index ID 0, page (1
:2881160). Test ((m_type >=DATA_PAGE && m_type <=
UNDOFILE_HEADER_PAGE) (m_type == UNKNOWN_PAGE &
& level == BASIC_HEADER)) failed. Values are 0 and
101. [SQLSTATE 42000] (Error 8939) Table error:
Object ID 0, index ID 0, page (1:2881160). Test (m
_freeData >= PAGEHEADSIZE && m_freeData <= (UINT)P
AGESIZE - m_slotCnt * sizeof (Slot)) failed. Value
s are 0 and 8192. [SQLSTATE 42000] (Error 8939) T
able error: Object ID 0, index ID 0, page ID (1:28
81161). The PageId in the page header = (0:0). [SQ
LSTATE 42000] (Error 8909) Table error: Object ID
0, index ID 0, page ID (1:2881162). The PageId in
the page header = (0:0). [SQLSTATE 42000] (Error
8... The step failed.
Please let me know how to rectify the error.
Sathish
on sql server 2000, try to do integrity check on several database once a week but failed, what would be main area to look up? thank you
View 3 Replies View RelatedI found the following error in my maintenance plan please help me on this
Under maintenace plan history i found this error:-
[Microsoft SQL-DMO (ODBC SQLState: 42000)] Error 1934: [Microsoft][ODBC SQL Server Driver][SQL Server]UPDATE STATISTICS failed because the following SET options have incorrect settings: 'QUOTED_IDENTIFIER'.
and jobs failed with following error
i found this error in job history of optimization & integrity check jobs:-
Executed as user: XXXXadmin. sqlmaint.exe failed. [SQLSTATE 42000] (Error 22029). The step failed.
Please help me find out the solution
Thanks in advance
Regards,
Sumit
I have setup a full maintenance plan on SQL2005. When I run the job, I don't see any error but by loooking at the Log file viewer it appears that Check Database Integrity step failed because :
Alter failed for Server 'LUMONT001'.
Moreover, when I run DBCC CHECKDB from the console I have no error message. Any clue?
Thanks, Paul
Hello everyone! Looking for some insight here on database backups that fail.
We have many SQL servers that we maintain by storing Job/Maintenence Plan history on a central server, which then emails out daily reports to let us know what backed up last night and what didn't
This was easy to do in SQL 2000, not so much in SQL 2005. I have put together a query that gathers the info I need for the successes:
SELECT DISTINCT '00000000-0000-0000-0000-000000000001' AS Plan_ID, mpld.line1 as "Plan Name", bud.database_name as "Database", mpld.server_name, 'Backup Database' as Activity, mpld.succeeded, bs.backup_finish_date, DATEDIFF (MS,bs.backup_start_date,bs.backup_finish_date) as Duration, bs.backup_start_date, mpld.error_number, mpld.error_messageFROM msdb.dbo.sysmaintplan_logdetail mpld
INNER JOIN msdb.dbo.backupset bs
on (select convert(char(12),mpld.start_time,109))=(select convert(char(12),bs.backup_start_date,109))-- on bs.database_name=bud.database_name
inner join
msdb.dbo.bu_dbs bud
on bs.database_name = bud.database_name
WHERE mpld.succeeded = 1 and mpld.line2 like 'Backup%' and bs.type='d'
and bs.backup_start_date > ( SELECT CONVERT(char(12), (GETDATE()-1), 109) )
ORDER BY bud.database_name DESC
But I am having trouble using a query to determine the databases the FAILED during backup. MSDB.BackupSet and MSDB.SYSMaintPlan_LogDetail really have nothing,because often times, even if a step in a Maint. Plan fails, the plan finishes reporting success.
Does anyone know of a good way to gather info about failed database backups?
Thank you!
Mario
Recently one of our DB went to suspect mode, we have resolved it(repair_allow_dataloss) and DB came online but when we fire CheckDB on that it is throwing following error
Msg 7985, Level 16, State 2, Line 2
System table pre-checks: Object ID 3. Could not read and latch page (1:355) with latch type SH. Check statement terminated due to unrepairable error.
DBCC results for 'xxxxxxx'.
Msg 5233, Level 16, State 98, Line 2
Table error: alloc unit ID 196608, page (1:355). The test (IS_OFF (BUF_IOERR, pBUF->bstat)) failed. The values are 12716041 and -4.
CHECKDB found 0 allocation errors and 1 consistency errors not associated with any single object.
CHECKDB found 0 allocation errors and 1 consistency errors in database 'xxxxxxx'.
And error log is also continuously popping the below message
Error:
824,
Severity: 24,
State: 2.
SQL
Server detected a logical consistency-based
I/O
[code]....