SQL Server 2008 :: How To See Table Variable Data In SSMS Debugger
Jul 28, 2015
is there a way to see the data of a table variable in the SSMS debugger? For example, if I set a breakpoint in SSMS and look at a populated table variable named @MyTable in the Locals tab at the bottom of the IDE, a value of "(table)" is displayed. There does not appear to be a way to expand or drill into this variable in the debugger to see the data. Do you know if there's a way to do this through the debugger or do you use an alternate approach when using the SSMS debugger?
View 1 Replies
ADVERTISEMENT
Apr 1, 2015
I have a specific requirement. I need to insert the DML statements executed from Management Studio into a SQL table. We have SQL Server 2008 R2 and 2012 instances.
View 8 Replies
View Related
Feb 26, 2015
I am writing a query to return some production data. Basically i need to insert either 1 or 2 rows into a Table variable based on a decision as to does the production part make 1 or 2 items ( The Raw data does not allow for this it comes from a look up in my database)
I can retrieve all the source data i need easily but when i come to insert it into the table variable i need to insert 1 record if its a single part or 2 records if its a twin part. I know could use a cursor but im sure there has to be an easier way !
Below is the code i have at the moment
declare @startdate as datetime
declare @enddate as datetime
declare @Line as Integer
DECLARE @count INT
set @startdate = '2015-01-01'
set @enddate = '2015-01-31'
[Code] .....
View 1 Replies
View Related
Mar 21, 2015
I'm trying to quantify the number of times folks use SQL Server Management Studio to change client data in one of our production databases. Does SQL Server keep this statistic? How do I get to this data?
View 6 Replies
View Related
Mar 25, 2015
I can create a temp table like this, and immediately read the data:
declare @NAICSGroups table (NAICS2DigitCode int, NAICSShortTitle varchar(35));
insert into @NAICSGroups (NAICS2DigitCode, NAICSShortTitle)
values
(11,'Agriculture'),
(21,'Mining'),
(22,'Utilities'),
[Code] .....
View 2 Replies
View Related
May 7, 2015
If you write a query that outputs XML, you'll have a long string in the Results window/tab that is also a link. Clicking on this link opens a new tab in SSMS with the formatted XML string easier to read.
My issue is that clicking on the link opens the "formatted XML string" tab ON THE SAME tab as my code and no way to go back to my code after that ... I need to reload the query from disk, if saved, to erase the "formatted XML" window.
View 0 Replies
View Related
Sep 15, 2015
I have to set up log shipping from Prod server "A" to 2 different DR servers ("B" and "C")...What do i have to do differently (or additional) using the GUI (ie not using Tsql Scripts) to accomplish this, in addition to the steps that are done to log ship to just one DR server?
View 0 Replies
View Related
Apr 22, 2008
Hello,
On a windows 2003 server R2 x64, i had the Framework.net 3.5, Sql Server 2005 express (instance s423553 on NT SERVICENetwork) and Visual Web Developper 2008.
I installed Sql Server Express 2008 Express (install .SQLexpress with the local account sqlserv10). The first time (with the account NTSERVICENetwork), it failed. I uninstalled it and Sql Server Management Studio 2005. The second time, the install end properly. But, can't find SSMS. On a MsSql2008 microsoft page, i've found a link for SSMS 2005. So i installed it.
But, on this server, Sql Server Management Studio Express 2005 does not work with Sql Server 2008. I tried to use the 2008 Instance with Visual Web Developper 2008 but it didn't work (only compatible with sql server 2000, 2005....).
Could you help me please ?
Thank you.
View 1 Replies
View Related
Jun 3, 2015
When I execute the following command, I get the output truncated to 79 characters, including three dots (as an ellipsis, I suppose).
EXEC master..xp_cmdshell 'powershell.exe "Get-ChildItem D:Databazepaleontologieprilohyverejneg -filter g417*.* -recurse | select Fullname | out-string -width 255"'When I execute the core command directly in Powershell, whether the text or ISE version, it works correctly, with or without the out-string -width command.
Get-ChildItem D:Databazepaleontologieprilohyverejneg -filter g417*.* -recurse | select Fullname | out-string -width 255What does it take to get SSMS to not truncate my output strings?
View 6 Replies
View Related
Sep 9, 2015
I would like to view the previous executed query error message in SSMS. Is there any way to view the query execution error messages history in SSMS?
View 2 Replies
View Related
Sep 30, 2015
SQL Server 2012 Replication. The command prompt instance of the replication is being run as the same user as the SSMS "version" using the runas option. With SSMS the error is that the client is missing a privilege. There is no error when it runs from the command prompt. All runs well.
We have reinstalled the replication feature.We have gone through several MSDN articles that indicate exactly what privileges (both within the DB and in Windows) that service account should have. None have worked Incidentally, when I create a new publication and indicate that the SQL Server Agent be used , the publication runs.
View 0 Replies
View Related
Oct 2, 2015
Because of a performance problem, somebody has given me a script which came from a SSRS report.
The code as supplied does not work when multivalued parameters are used.
Testing/tuning/building in SSMS is far superiour than in SSRS. So that's why I like to use SSRS for building the code/script/sql-statement.
Offcourse parameters have to be set correctly. (That is no problem).
Splitting of the multivalued parameter is not a problem either.
View 5 Replies
View Related
Apr 20, 2010
When I go to open a file in SSMS, the Open File dialog box appears. In the left side of that box, there is a panel containing shortcuts to various locations: Desktop, My Projects, and My Computer. I would like to add some shortcuts to folder that I use in this area, but I haven't been able to figure out how. how to do this?
View 9 Replies
View Related
May 18, 2006
Hi all,
I have SQL Server Management Studio Express (SSMS Express) and SQL Server 2005 Express (SS Express) installed in my Windows XP Pro PC that is on Microsoft Windows NT 4 LAN System. My Computer Administrator grants me the Administror Privilege to use my PC. I tried to use SQLQuery.sql (see the code below) to create a table "LabResults" and insert 20 data (values) into the table. I got Error Messages 102 and 156 when I did "Parse" or "Execute". This is my first time to apply the data type 'decimal' and the "VALUES" into the table. I do not know what is wrong with the 'decimal' and how to add the "VALUES": (1) Do I put the precision and scale of the decimal wrong? (2) Do I have to use "GO" after each "VALUES"? Please help and advise.
Thanks in advance,
Scott Chang
///////////--SQLQueryCroomLabData.sql--///////////////////////////
USE MyDatabase
GO
CREATE TABLE dbo.LabResults
(SampleID int PRIMARY KEY NOT NULL,
SampleName varchar(25) NOT NULL,
AnalyteName varchar(25) NOT NULL,
Concentration decimal(6.2) NULL)
GO
--Inserting data into a table
INSERT dbo.LabResults (SampleID, SampleName, AnalyteName, Concentration)
VALUES (1, 'MW2', 'Acetone', 1.00)
VALUES (2, 'MW2', 'Dichloroethene', 1.00)
VALUES (3, 'MW2', 'Trichloroethene', 20.00)
VALUES (4, 'MW2', 'Chloroform', 1.00)
VALUES (5, 'MW2', 'Methylene Chloride', 1.00)
VALUES (6, 'MW6S', 'Acetone', 1.00)
VALUES (7, 'MW6S', 'Dichloroethene', 1.00)
VALUES (8, 'MW6S', 'Trichloroethene', 1.00)
VALUES (9, 'MW6S', 'Chloroform', 1.00)
VALUES (10, 'MW6S', 'Methylene Chloride', 1.00
VALUES (11, 'MW7', 'Acetone', 1.00)
VALUES (12, 'MW7', 'Dichloroethene', 1.00)
VALUES (13, 'MW7', 'Trichloroethene', 1.00)
VALUES (14, 'MW7', 'Chloroform', 1.00)
VALUES (15, 'MW7', 'Methylene Chloride', 1.00
VALUES (16, 'TripBlank', 'Acetone', 1.00)
VALUES (17, 'TripBlank', 'Dichloroethene', 1.00)
VALUES (18, 'TripBlank', 'Trichloroethene', 1.00)
VALUES (19, 'TripBlank', 'Chloroform', 0.76)
VALUES (20, 'TripBlank', 'Methylene Chloride', 0.51)
GO
//////////Parse///////////
Msg 102, Level 15, State 1, Line 5
Incorrect syntax near '6.2'.
Msg 156, Level 15, State 1, Line 4
Incorrect syntax near the keyword 'VALUES'.
////////////////Execute////////////////////
Msg 102, Level 15, State 1, Line 5
Incorrect syntax near '6.2'.
Msg 156, Level 15, State 1, Line 4
Incorrect syntax near the keyword 'VALUES'.
View 7 Replies
View Related
Feb 23, 2015
I am trying to insert bulk data into main table from staging table in sql server 2012. If any error comes, this total activity is rollbacked. I don't want that to happen. I want to know the records where ever the problem persists, and the rest has to be inserted.
View 2 Replies
View Related
Feb 13, 2015
I have a report that summarizes hospital readmissions. Some months may only have a female or male patient that is readmitted but, I want to show both months either way.
create table dbo.Scott_TEST
(
YearMonth char(9),
Gender char(1),
NumOfFemale int,
NumOfMale int
[Code] ....
View 2 Replies
View Related
Jun 24, 2015
MyTable has the following data (Just a sample)
parent | NAme | Checked | contactmethod|Check2 | Other
974198 | Employment | true | Face to Face | true | null
974224 | Other | true | Face to Face | true | skills
974224 | Other | true | Contact | true | skills
I'd like to pivot on "parent"
In a perfect world I'd like to see output like
974198 | Employment | true | Face to Face | true | null
974224 | Other | true | Face to Face, Collateral Contact | true | skills
If there are more than one name or contactmethod for the same parent then they would be strung along with commas
View 1 Replies
View Related
Sep 11, 2015
I need to update the Denominator column in one row with the value from the Numerator column in a different row. For example the last row in the table is
c010A92NULL
I need to update the Denominator, which is currently NULL, with the value from the Numerator where the MeasureID=c001 and GroupID=A.
This value is 668 so, the row should look like
c010A92668
create table dbo.TEST
(
MeasureID varchar(10),
GroupID char(1),
Numerator float,
Denominator float
)
[Code] .....
View 7 Replies
View Related
Jan 25, 2011
I have a XML data passed on to the stored proc in the following format, and within the stored proc I am accessing the data of xml using the nodes() method
Here is an example of what i am doing
DECLARE @Participants XML
SET @Participants = '<ArrayOfEmployees xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<Employees EmpID="1" EmpName="abcd" />
<Employees EmpID="2" EmpName="efgh" />
</ArrayOfEmployees >'
SELECT Participants.Node.value('@EmpID', 'INT') AS EmployeeID,
Participants.Node.value('@EmpName', 'VARCHAR(50)') AS EmployeeName
FROM
@Participants.nodes('/ArrayOfEmployees /Employees ') Participants (Node)
the above query produces the following result
EmployeeID EmployeeName
--------------- -----------
1 abcd
2 efgh
How do I join the data coming out from the above query with another table in the database, for example Employee in this case
i.e. somewhat like this (note the following query does not perform the join correctly)
SELECT Participants.Node.value('@EmpID', 'INT') AS EmployeeID,
Participants.Node.value('@EmpName', 'VARCHAR(50)') AS EmployeeName
FROM
@Participants.nodes('/ArrayOfEmployees /Employees ') Participants (Node)
INNER JOIN
Employee EMP ON EmployeeID = EMP .EmployeeID
My desired output after the join would be
EmployeeID EmployeeName Email Home Address
--------------- ----------- --------------- -----------
1 abcd abcd@abcd.com New York
2 efgh efgh@efgh.com Austin
View 8 Replies
View Related
Mar 23, 2015
I want to bulk insert data into a table named scd_event_tab inside a database named rdb.
When I do select * from rdb.dbo.scd_event_tab, i get :
JOB_ID RUN_ONPRIORITYPAYLOADTIMEOUT_INTERVALSTATUSPICKUP_TIMESCD_TYPESCHEDULE_IDDB_ADMIN_LOGIN_REQUIRED_YN
I saved the result into a csv file and then truncated the table. Now, I am trying to bulk insert the data into the table. So I used:
bulk insert
rdb.dbo.scd_event_tab from 'C:userssluintel.ctrdesktopeventtab.csv'
with
(
codepage = 'RAW',
datafiletype = 'native',
fieldterminator = ' ',
keepidentity,
keepnulls
);
go
However, I get this error:
Msg 4867, Level 16, State 1, Line 1
Bulk load data conversion error (overflow) for row 1, column 1 (JOB_ID).
Msg 4866, Level 16, State 5, Line 1
The bulk load failed. The column is too long in the data file for row 1, column 3. Verify that the field terminator and row terminator are specified correctly.
Msg 7399, Level 16, State 1, Line 1
The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.
Msg 7330, Level 16, State 2, Line 1
Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".
View 9 Replies
View Related
Apr 14, 2015
I have a query needs to look for 5 records data in a table. Basically i need to hardcode. Below is my query which didn't work out.
select BF_ORGN_CD, BF_BDOB_CD, BF_TM_PERD_CD,data
from BF_DATA
WHERE (BF_ORGN_CD,BF_BDOB_CD,BF_TM_PERD_CD) in ***** i guess this is the wrong query****
('A1', 'B1', 'C1')
('A2', 'B2', 'C2')
('A3', 'B3', 'C3')
('A4', 'B4', 'C4')
('A5', 'B5', 'C5')
but if i use the query below it will generate more records than these 5 records
select BF_ORGN_CD, BF_BDOB_CD, BF_TM_PERD_CD,data
from BF_DATA
WHERE (BF_ORGN_CD) in ('A1', 'A2', 'A3', 'A4', 'A5')
and (BF_BDOB_CD) in ('B1', 'B2', 'B3', 'B4', 'B5')
and (BF_TM_PERD_CD) in ('C1', 'C2', 'C3', 'C4', 'C5')
View 4 Replies
View Related
Jun 1, 2015
I want to create a XML file with data in my table. I have a question about tags.
SELECT
-- Root element attributes
'http://tempuri.org/Form.xsd' AS 'xmlns',
'http://www.w3.org/2001/XMLSchema-instance' AS 'xmlns:xsd',
(
SELECT
-- Creating a default element
[Code] ....
This is my query. When I use 'xmlns' namespace the result is below:
<Form xmlns="http://tempuri.org/Form.xsd" xmlns:xsd="http://www.w3.org/2001/XMLSchema-instance">
<Veri xmlns="">
<Satir>
<Id>1</Id>
</Satir>
</Veri>
</Form>
I dont want to see 'xmlns' in 'Veri' tag. When I use xmlna or another word instead of 'xmlns' the result is below:
<Form xmlns="http://tempuri.org/Form.xsd" xmlna:xsd="http://www.w3.org/2001/XMLSchema-instance">
<Veri>
<Satir>
<Id>1</Id>
</Satir>
</Veri>
</Form>
How can I remove 'xmlns' from 'Veri' tag while using it in 'Form' tag
View 2 Replies
View Related
Jul 25, 2015
I have the following two tables:
CREATE TABLE [MailBox].[Message](
[Id] [bigint] IDENTITY(1,1) NOT NULL,
[SenderId] [bigint] NOT NULL,
[Message] [nvarchar](max) NOT NULL,
[SentDate] [datetime] NOT NULL,
CONSTRAINT [PK_MailBox.Message] PRIMARY KEY CLUSTERED
[Code] ....
I'm building a messaging functionality in to my application, I'm able to insert a message into the database and this message then appears inside the other users inbox. The issue I have it when I click on this message to view the conversation I make a call to the following sp as shown here:
@UserId bigint,
@SenderId bigint
AS
BEGIN
SET NOCOUNT ON;
[Code] .....
The problem with this is I'm trying to connect to the user photos table to return their profile picture, but for some reason even though I have specified IsProfilePic I get all the photos returned, instead it should be two photos, one for the @UserId and the other for the @SenderId, its equivalent to me doing this:
Select *
From [User].[User_Photos]
where (UserId = 1 or UserId = 2) and IsProfilePic = 1
And this returns me the correct information.
View 3 Replies
View Related
Feb 18, 2015
Production and development servers are on different domains and they do not trust each other. How do I import data from the table t1 from a database db1 in production and load it into table t1 inside database db1 in development?
View 3 Replies
View Related
Feb 9, 2015
There are 2 tables
1. Table Name : TRNNUM Field Name : TRNID
2. Table Name : TRNPRD Field Name : TRNID, PRDID
Sample of tables
Table TRNNUM
TRNID
-----
1234
2565
3458
Table TRNPRD
TRNID PRDID
----- -----
1234 AA
1234 BB
1234 CC
2565 CC
2565 EE
2565 FF
2565 HH
3458 AA
3458 BB
Desired output is
TempTable
TRNID PRDID PRDSEQ
----- ----- ------
1234 AA START
1234 BB START:AA
1234 CC START:AA:BB
2565 CC START
2565 EE START:CC
2565 FF START:CC:EE
2565 HH START:CC:EE:FF
3458 AA START
3458 BB START:AA
View 2 Replies
View Related
Feb 25, 2015
I want to store Images as binary data in SQL table and compare it each time with a image file I am getting. I've tried below approach but getting error:
DROP TABLE #BLOBTest
CREATE TABLE #BLOBTest
(
TestID int IDENTITY(1,1),
BLOBName varChar(50),
BLOBData varBinary(MAX)
);
[Code] ....
Error: Msg 4861, Level 16, State 1, Line 10
Cannot bulk load because the file "C:Files12656.jpg" could not be opened. Operating system error code 3(failed to retrieve text for this error. Reason: 15105).
View 4 Replies
View Related
Mar 1, 2015
When you load the data into a new partition table, can it to done online without any downtime? because I have few tables that are around 250 gigs and more.
View 5 Replies
View Related
Apr 2, 2015
I am trying to create a small data set for use in a charting program. However, I am not getting the results that I expected.
********QUERY BEGIN*****************
DECLARE @BeginDate datetime
DECLARE @EndDate datetime
SET @BeginDate = '2014-01-01'
SET @EndDate = '2014-12-31';
WITH CTE AS (
SELECT bkg_nbr
[Code] ....
The raw data from the CTE is:
Bkg_nbr STATE_NBR Ranking
20140000943200060000 1
20140000131500140000 1
20140000682200140000 2
20140000504100210000 1
The result of the query above was:
Category RecCount
Non-Recidivists3
Recidivists 1
The outcome I was looking for was:
Category RecCount
Non-Recidivists2
Recidivists 1
What I am trying to do is count persons in buckets "non-recidivists" and "recidevists" based on how many bkg_nbr they have per STATE_NBR. If they have more than 1 bkg_nbr per STATE_NBR then put them in the "recdivists" bucket. If they only have a 1 to 1 then put them in the "non-recidivists" bucket.
View 2 Replies
View Related
Apr 10, 2015
I am trying to create a trigger on a table. Let's call it table ABC. Table looks like this:
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[ABC](
[id] [uniqueidentifier] NOT NULL,
[Code] ....
When someone updates a row on table ABC, I want to insert the original values along with the current date and time getdate() into table ABCD with the current date and time into the updateDate field as defined below:
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[ABCD](
[id] [uniqueidentifier] NOT NULL,
[Code] .....
The trigger I've currently written looks like this:
/****** Object: Trigger [dbo].[ABC_trigger] Script Date: 4/10/2015 1:32:33 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TRIGGER [dbo].[ABC_trigger] ON [dbo].[ABC]
[Code] ...
This trigger works, but it inserts all of the rows every time. My question is how can I get the trigger to just insert the last row updated?
I can't sort by uniqueidentifier in descending as those can be random.
View 9 Replies
View Related
Jun 18, 2015
I have two identical table structure with at least 60 or more columns!!
Table A
ID numeric(18, 0) Primary Key,
RefID numeric(18, 0),
CoNum Varchar(15),
PrevCode Varchar(15),
DispCode VArchar(15),
EffDate Date,
Sal numeric(18, 0),
SDeposit numeric(18, 0) Etc....
I need to compare Data between two table and provide result like this!
RefId ID, CoNum, PrevCode, DispCode, EffDate, Sal, SDeposit
1, ,No Match, ,20,5200,0
So condition like. If table A Column Data does not Equal Table B Column data then
If datatype is Date then display Difference of Days.
if Datatype is Numeric then display Difference between value.( it display 0 if doesn't have difference)
if Datatype is Varchar then display No Match word.
View 0 Replies
View Related
Aug 4, 2015
I have created procedure that creates a temptable with the users from a certain business unit.
I need to save the output from the username field to my variable @TheUsers as I will be using this variable in ssrs.
CREATE TABLE #TEMP_TABLE
(
useriduniqueidentifier,
usernamevarchar(200),
unitiduniqueidentifier,
unitnamevarchar(200)
[Code] ....
View 6 Replies
View Related
Jan 13, 2013
Or can it record before and after column changes based on the LSN only?
An extract from a file based legacy accounting system is performed every night. The system does not have a primary key because transactions are managed through program code. (the more things change...). The extract is copied to text in Unix and FTP'd to Windows, where the file is loaded into SQL Server by kill & fill. Because of the expense of modifying the source system, there is enormous inertia/resistance to injecting a primary key at the source, so kill & fill it stays.
In reading about Change Data Capture, it seemed to me that column level insert update and delete are stored in tables that remember the before and after content of each column tracked. In my reading I have seen many references to the LSN to decide when and what to record as changed, but I have not seen any refereference to the necessity of a primary key for Change Data Capture to work. This is in contrast to replication, where the requirement for the existence of a primary key is made plain.
Is it possible to use Change Data Capture against a table without a primary key? How to use it to change the extract from kill and fill to incremental.
View 9 Replies
View Related
Feb 11, 2015
I have a table 300+GB. it holds 10 years of Data. I need to delete 5 years of data and put it to another server so I can have more space.
If I delete 5 years of data, Transaction log gets so huge and size of the database even gets bigger because of the .ldf file which even gets bigger! I think I can shrink the log file and the data file. Is this the best way to do it?
View 8 Replies
View Related