SQL Server 2008 :: Status Suspended On Command Killed / Rollback

Mar 4, 2015

I was running a stored procedure it was suspended for about 11 hours so I decided to kill it now its in Killed/Rollback stage for 12 hours and when check the status of roll back it says "Estimated rollback completion: 0%. Estimated time remaining: 0 seconds." its using up CPUTIME 380000 and DiskIO 970000. How to do I stop this co.mpletely

View 4 Replies


ADVERTISEMENT

Killed/Rollback Process Hogging ALL CPU Resources.

Feb 25, 2005

I have a test database for the end users to test their select queries for reports.
One of my users is writing queries that cause locking in the database. I killed the process last evening and they are in Killed/Rollback status but are still hogging 90% of the CPU resources for the past 12 hrs. I tried killing them several times but no go.

I know that the best way to clear of these processes is by restarting SQL Server. If that is not an option is there is any other way we can clean these processes?

Also the user running these queries has a read only and create view access to the database. From my experience processes that go into Kill/Rollback state after you kill them are processes associated with some update transaction. Since the user as far as i know is running Select commands would an infinite loop cause this ?


thanks
nina

View 8 Replies View Related

Waiting For Ole Db Resource And Cannot Kill Process In KILLED/ROLLBACK

Feb 21, 2007

I have a query to refer to the data source in as400 with ODBC 'iSeries Access for Windows ODBC data source' and a linked server with 'oledb for ODBC driver' in SQL2005 (9.0.2047)

Now we got 2 problems,

1. When we refer to the view with openquery e.g select * from openquery (abc, 'select * from dates')

This query continue to run without ending. In Activity monitor, we found that it is waiting for resource ole db

2. Since the process continue to run without ending, I kill the process in activity monitor or by command 'kill'. It shows the status 'KILLED/ROLLBACK' and it returns 'SPID 197: transaction rollback in progress. Estimated rollback completion: 0%. Estimated time remaining: 0 seconds.' in 'kill 197 with STATUSONLY'



In problem 1, I found some ppl encountered the same problem (waiting for resource oledb) with openquery to different data source e.g. vfp, oracle.

In problem 2, we can't restart the sql server for clear the unkillable process

Kindly advise. Thanks in advance.









View 4 Replies View Related

Suspended Status

Sep 25, 2007



Hi All,

Using SQL Server 2005 w/ SP2 I have a simple select query with a parameterized WHERE clause that in Management Studio runs nearly instantly, everytime. Using the same login, when I run the same query using SQL RS the results (only 6 rows) takes upwards of 5 minutes. If I look at the Activity Monitor, it shows the process as suspended and indicates a CXPACKET. Everything I have read on the forums about this indicate it is an issue with not having SP2 , which I do. Or a 64 bit version, I have 32. Or for large bulk updates, I am doing a very simple select. Does anyone have any clue on this?

regards
Bill

View 3 Replies View Related

Process Suspended Status

Aug 13, 2007

Hello,

On my sql server 2005 when I run sp_who, I often see process in suspended status. These process block
my sql server so its utilization is low.

Is there any way to kill suspended process automatically, or can I set any timeoutfor these process?

View 4 Replies View Related

SQL Server 2008 :: Backup Running Long And Backup Threads Show Suspended

Feb 18, 2015

SQL Server 2008 r2 - 6 GB memory...I attempted a backup on a 500GB database but it was taking way too long. I checked the resources on the box and saw the CPU at 100%. I checked the SQL Server activity log and saw a hung query (user was not even logged on) that had multiple threads so I killed it and now the CPU utilization is back to normal.

Trouble is, now all of the threads in the activity monitor for the backup show 'suspended' and the backup appears to be not doing anything.

View 3 Replies View Related

Does Sql Server Has Command Equalent To Rollback To In Oracle

Jun 12, 2006

HI All

does Sql server has command equalent to Rollback to in Oracle. That means when you do some update operation and i want to revertback the original record. If so what is that command.



With Regards,

AHARI

View 1 Replies View Related

What The Equivalent Command IN SQL SERVER EXPRESS To POSTGRESQL BEGIN ROLLBACK And COMMIT

Jun 27, 2007

Hello,

First of all, this is my first time using SQL SERVER 2005 express, before that i'm using POSTGRESQL database.

I would like to know how what's the equivalent command for "BEGIN","ROLLBACK","COMMIT", these are the POSTGRESQL COMMAND use to start transaction, rollback transaction and commit transaction.

Example when i use this kind of command is . I need to insert data into 3 table. before insert into table1, i issue "begin", start to insert data into table1, if table1 no error, then i proceed to table 2 and table3. if table2 and table3 no error. then issue "commit" to commit the changes. but if any error happen between table1 and table 2 or table 2 and table3, i will issue "rollback" to roll any changes that i make to table1, table2 and table3.

Maybe some one can teach me how to achieve using SQL SERVER 2005 EXPRESS.

Thanks and Regards.

Beh Chun Yit

View 1 Replies View Related

SQL Server 2008 :: In Query - All Rows With Same Status

Oct 28, 2015

I get records from a query whose status is "Marked". I need another column to be added to result set which just says "Marked" for every record. Is that possible in query?

View 6 Replies View Related

SQL Server 2008 :: Log Shipping Status Report Through Mail?

Feb 29, 2012

i'm writing below this code..

exec msdb..sp_send_dbmail
@profile_name = 'local',@recipients='chintu@www.com'
, @subject ='Log Shipping Job succeeded'
, @QUERY = 'exec sp_executesql @stmt=N'exec sp_help_log_shipping_monitor',@params=N'

I want Log shipping Status Through Mail. Last back up transaction in the day and last restoration trn file in the day...

View 9 Replies View Related

SQL Server 2008 :: Check DB Mail Status On All Servers

Apr 23, 2015

i have 70 SQL database servers and i setup DB Mail on the 70 Servers, i want to know is there a way to find the status of all the jobs which i assigned the DB Mail and if its working/failing... is there a script i can run on powershell or SQL to find out that information

View 1 Replies View Related

SQL Server 2008 :: Setting To Not Rollback A Failed SSIS Package That Inserts 100 Million Records?

May 20, 2015

I have a pretty simple SSIS package that fast loads a 100 million record table into a SQL Server 2008 table on a daily basis. This normally runs fine and completes in about 1 hour. As this is perhaps one of our largest running SSIS packages, about once every 2-3 weeks this SSIS will fail/drop connection. Once it fails, the large number of records will start rolling back. This rollback process can take 1+ hours so I cannot even restart the failed SSIS package immediately. This is a problem.

I am looking for a solution or option so I do not have to wait on that rollback to restart this particular, long running SSIS package. Is there an option/setting to leave the partial data set committed and not rollback? Then I could just restart the SSIS package immediately or set it the SSIS to auto-restart 1 time on failure. The first step in the SSIS does a truncate of the destination table.

View 2 Replies View Related

SQL Server 2008 :: Script To Return Replication Status As Small Int

Mar 26, 2015

I need a script that will return the replication status as small int.

View 1 Replies View Related

SQL Server 2008 :: Reminder Emails - Records Created With Status

Jun 29, 2015

We have a difficult requirement.

When records are initially created, they are given statuses of New, Pending, Closed

By default, the status is New.

If no action has been taken after 15 days since the records were created, users are sent a reminder.

I have this part working.

The problem is that as long as the status is not equal to closed, start sending reminders every 10 days.

Here is what I am working with:

SELECT [ID] , [Name], [Email],
Status
FROMmyTable
WHERE Status_Name != 'Closed' AND Status_Name IS NOT NULL and Status_Name = 'New' and Status='Pending'
AND CONVERT(Char,DateAdd(day,-15,getdate()),101) = CONVERT(Char,Date_Entered,101)

View 2 Replies View Related

Saving Some Data Despite A Rollback Transaction Command

Sep 12, 2007



I am working on reformating, cleaning, adding derived elements, etc... on data with no data validity checks on the front-end, source data. Its an incremental process where each month I add new data to the prior months' history. Sometimes the new monthly source data "surprises" me -- different values, different data definitons, etc. than expected.

I deal with these surprises by accumulating the fields/values that are unexpected after converting them to varchar with some explanatory language into a table [program_newdataprobs]

If there are any records in [program_newdataproblem] I rollback the transactions so the prior months' history remains unaltered. The problem is I then "lose" the contents of [program_newdataproblem] which I would like to hand to the source data people to troubleshoot.

I have tried the following:


Begin Transaction tran1

.... code that reformats data here
if (select count(*) from program_newdataproblem)>0

BEGIN



Begin Transaction tran2

select * into #t1 from program_newdataproblem

Commit Transaction tran2

Rollback Transaction tran1

insert into program_newdataproblem
Select * from #t1


END


This bombs because because #t1 no longer exits

Any way I can "keep" the data from program_newdataproblem when I Rollback the other transactions? (without having to store the history in separate tables that I can then access if new data errors occur)

Thanks,




View 3 Replies View Related

SQL Server 2008 :: Command For Adding New Drives?

Aug 26, 2015

Currently we're running everything on C: but I've convinced management to split out, what's the command to add drives?

View 9 Replies View Related

SQL Server 2008 :: Executing Query / SPs Through Command Line

Sep 23, 2015

How do I execute below scripts using CMD:

Please Note: SQL server 2008r2, default instance with window Authentication.

1. Select * from Adventurewoks2008.Person.Person where Id = 5

2. Exec usp_getemployee (with parameter Manager_id = 100)

3. I have a folder named 'MyFolder' which contains 3 store procedures (usp_A, usp_B and usp_C).

How do I execute all 3 using CMD against AdventureWorks database.

View 9 Replies View Related

SQL Server 2008 Express Command Line Installation

Mar 25, 2008



Hi
I need to Install the SQL server 2008 express with Instance name and Sa password parameter in silent mode . I tried couple of command line arguments for this. but It didn't work, I got the setup failure error message
"The setting 'QB' specified is not recognized.Error code 0x84B40003."
Can any one help me with this?

These are the commands I tried.

1) sqlexpr.exe /qb instancename="MACHINENAMESQLEXPRESS2008" SCCCHECKLEVEL=IncompatibleComponents:1;MDAC25Version:0 ERRORREPORTING=1 SQLAUTOSTART=1 SAPWD="PWD" SECURITYMODE=SQL DISABLENETWORKPROTOCOLS=0"

2)SQLexpr.exe /qb /ACTION=Install /FEATURES=SQL /instancename="MACHINENAMESQLEXPRESS2008" SAPWD="PWD" SECURITYMODE=SQL


Thanks in advance.

Regards,
Nav.

View 1 Replies View Related

SQL Server 2008 :: File Formatting Export To Excel Using BCP Command

Aug 28, 2015

Declare@QRYvarchar(8000)
Select@QRY='bcp "Select COL1, COl2 From table(nolock)" queryout "D: est.xls" -c -T -S ' + convert(varchar(20), serverproperty('servername'))
Select@QRY
Execmaster..xp_cmdshell@qry

The file test.xls is getting generated but when opening getting the message

"File you are trying to open is in a different format than specified by the file extension"

Is there any property that can be set to avoid this message?

View 6 Replies View Related

SQL Server 2008 :: Replication Works From A Command Prompt But Not From SSMS?

Sep 30, 2015

SQL Server 2012 Replication. The command prompt instance of the replication is being run as the same user as the SSMS "version" using the runas option. With SSMS the error is that the client is missing a privilege. There is no error when it runs from the command prompt. All runs well.

We have reinstalled the replication feature.We have gone through several MSDN articles that indicate exactly what privileges (both within the DB and in Windows) that service account should have. None have worked Incidentally, when I create a new publication and indicate that the SQL Server Agent be used , the publication runs.

View 0 Replies View Related

Passing Status Back From Command Line Application To SQL Job

Jun 4, 2007

Hi,



I have created a job in SQL Server 2005 in which one of the step executes a .NET console application which is created in .NET to update some status to database before the next step. i need some help in sending some status back to sql job when i come accross any problem in the console application for ex when there is a exception i need to send some status to the job, so the job gets failed permanently. i tried few other methods of updating some temporary status database with this error information and have another intermediate step in the job to check for the status... it worked but i dont like doing it. please let me know if there is any other method to do this.



Thanks in advance

Hariharan

View 5 Replies View Related

Open Transaction With Sleeping Status And Wait Type As AWAITING COMMAND

Sep 4, 2015

During our DR drill we found that the same code which used to run perfectly fine on our Primary Data Centre is running very slow on Disaster Recovery DB Server and there are Lot's of open transaction with sleeping status and waittype as 'AWAITING COMMAND'.CPU, Memory and disk utilization are good. The ping reply between the app server and the DB server is well within the limit's even blocking is not their, also nothing is reported in the error logs. We are using SQL server 2014 STD 64 BIT on Windows Server 2012.

View 6 Replies View Related

SQL Server 2008 :: How To Append Hostname / Computername To Text File Using Windows Batch Command

Mar 9, 2015

How to append an hostname/computername to a text file using windows batch command?

View 1 Replies View Related

SQL Server 2008 :: List Of Commands That Require Exclusive Access In Order For Command To Complete

Aug 10, 2015

Any list of commands that require exclusive access in order for the command to complete? I had an instance today where a DBA executed sp_changedbowner command which is the alter database command on a production database and it locked it up.

View 0 Replies View Related

Reporting Services :: SSRS 2008 Wants To Filter The Prod Order Status Report

Jul 9, 2015

Created Prod order status report, in status, we have different status

created =0
start =4
released =3
reported as finished =5
ended =7

I have the report, in report don't want to show the Prod order for ended status, how can I add the filter for this so it can show for all the other status not ended status. when I did on filter  <7 ,  it did not work

View 4 Replies View Related

SQL Server 2005 SP2 Cannot Be Installed Because The Database Engine Setup Remains In Suspended Installation Mode

Feb 23, 2007

SP2 refuses to install for the Database Engine because €œthe previous upgrade did not complete€?, i.e. it detects a suspended installation. The same thing happened to me when I installed SP1. I then remember opening the maintenance dialog and completing the setup, after which SP1 installed just fine.

When I try to do the same thing this time, I€™m presented with the €?complete the suspended installation€? option, which when I run it reports the installation completed successfully. However, in reality the installation still remains in suspended mode for whatever reason. If I reboot and open the maintenance dialog, I€™m still presented with the €?complete the suspended installation€? option. I€™ve even tried to run it more than once, but it doesn€™t help. Needless to say, SP2 still refuses to install.

I don't know why the installation is in a suspended state. I know every part of SP1 installed successfully in the end, and the computer never crashed during the installation. I've been using it every day since then, without any problems. All other parts of SP2 did install successfully.

I created a feedback entry on Microsoft Connect, where you can find the log files created by Windows Installer. The URL is:
https://connect.microsoft.com/SQLServer/feedback/ViewFeedback.aspx?FeedbackID=259606

Any ideas what I can do to resolve this problem?

View 1 Replies View Related

Deleting Killed Processes From Current Process

Aug 25, 2005

When I was trying to get my maintenance plans to work there were many processes I had to kill. These processes were killed over a week ago but they still list in the Current Activity | Process Info list. Under Command it says "Killed/Rollback". If I go into QA and run kill 65 with statusonly it says the process is complete. How do I get these processes off the list?

View 4 Replies View Related

SQL CE 3.5, VS 2008 Beta2: Could Not Get A Simple INSERT Command To Work!

Sep 13, 2007

Hello,

I have installed VS 2008 Beta 2 which includes SQL CE 3.5, (I have VS 2005 installed too).

I can not get any INSERT command to work!

First i have tried the VS wizard for a new connection and a dataset. but after inserting a row into one of the dataset tables and then updating it to SQL CE with tha data adapter, nothing happens! NO ERROR and NO inserted row in the database file! so the identity of the inserted row in dataset table doesnt get updated.

Then i tried a simple code without any dataset in a clean solution:





Code Snippet

Dim con As New SqlCeConnection("Data Source=|DataDirectory|MyDatabase#1.sdf")
Dim cmd As New SqlCeCommand("INSERT INTO [Table1](Name) VALUES('TestValue')", con)
Try
con.Open()
cmd.ExecuteNonQuery()
Catch ex As SqlCeException
MessageBox.Show(ex.Message)
Finally
con.Close()
End Try
NO ERROR! NO INSERTED ROW! Nothing happen!

I'm using it in a desktop application.

Why?

Regards,
Parham.

View 5 Replies View Related

DB Engine :: How To Catch Who Killed Active Session / Connection

May 20, 2015

Is there any specific event i have to select in SQL profiler to monitor the process / user that kills active connection which is performing a batch data transfer. Any other alternative other than profiler that catches this (like XEvents)?

View 4 Replies View Related

Job Suspended.

Jan 22, 2001

Is anyone aware of how to start a scheduled job once it has been marked as "suspended"? (SQL Server 7)

Thanks Brian

View 2 Replies View Related

How Can I Always Close A Text File From A CLR Stored Procedure Even When The Process Is Killed?

Mar 6, 2007

I have a C# SQL 2005 .net stored procedure which scrubs a text file looking for characters not in a range of characters and replacing them with another character.  This works fine except when the process is killed.  When this happens the file handle of the file being scrubbed is not released.  I use a try catch finally block when opening the file and the output file.  The finally section fiushes the output file and closes all files and streams but still when I go to access the file again or use the file in explorer it says the file is still in use.  Should I be handling this some other way?  How do I know the files will always be closed correctly.

View 1 Replies View Related

Reporting Services Configuration Killed Several Summary Report Functions

Nov 22, 2006

I installed 2K5 developer on my box. I was impressed with the Summary tab report functions and the reports available there. Then I ran the "Reporting services configuration" tool to get RS running, but now several of the summary reports are broken. There are several different error messages given in the summary window, depending on the report selected.

For example, the "server dashboard" now displays












Summary Unavailable











The information needed to display a summary page for the selected object is not available.








Error:









"sql_handle" is not a recognized table hints option. If it is intended as a parameter to a table-valued function, ensure that your database compatibility mode is set to 90.



The next two reports work, but the "Scheduler Health" report displays


















Summary Unavailable











The information needed to display a summary page for the selected object is not available.








Error:









Incorrect syntax near '.'.



"Memory Consumption" works GREAT, but "Activity - All blocking transaction" shows:


















Summary Unavailable











The information needed to display a summary page for the selected object is not available.








Error:









Incorrect syntax near '.'.
Incorrect syntax near '.'.
Incorrect syntax near the keyword 'as'.
Incorrect syntax near the keyword 'as'.



What could be the cause of such errors? Is there an "easy fix"? I wouldn't know how to "unconfigure" reporting services and have a feeling that wouldn't help anyway...



View 11 Replies View Related

SUSPENDED Processes

Apr 1, 2008

Hi All

When i see the result of Sp_who2, i see the status of a process as
"SUSPENDED" for some of the processes like logwriter, checkpoint etc.
and also found the same status for "IF @@TRANCOUNT>0 COMMIT TRAN"

Please let me know what does it mean in the context of SQL 2005

Thanks in advance.

View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved