SQL Server 2012 :: Add Where Condition On ID Column With Values Coming From Variable
Jun 26, 2015
I am trying to add a where condition on an ID column(type - INT) with values coming from a variable (type - STRING). i am using cast to cast the ID as Varchar and then apply the condition, but i am not getting any results back. following is an example of what i am trying to do.using temp table in the example , so you can copy the t-sql and run as is.
CREATE TABLE #TABLE1(ID INT)
INSERT INTO #TABLE1 VALUES (1), (2) , (3) , (4)
DECLARE @ID varchar(8000) = '2,4'
[code]....
View 4 Replies
ADVERTISEMENT
Jul 23, 2014
I want to identify rows that go negative but only for 2 cents or more as well as identify rows that 2 or more.
I have this expression that does not work how I want it to work:
CASE
WHEN (SUM(FavUnfavCostChange) < (2/100) THEN 'Less'
WHEN SUM(FavUnfavCostChange) > (2/100) THEN 'More'
ELSE NULL
END AS 'Flag'
But I get:
0.00000815000000000000More -- this is not more than 2 cents, is just a positive number
-0.00094700000000000000Less -- this is not less than 2 cents, is just negative number
-0.00222000000000000000Less -- this is not less than 2 cents, is just negative number
-0.00012250000000000000Less -- this is not less than 2 cents, is just negative number
0.00000000000000000000NULL -- this is zero so null is fine
0.01188576000000000000More -- this is not more than 2 cents, is just a positive number
View 3 Replies
View Related
Apr 16, 2014
Is there any way to get the Columns Used in where condition in a procedure using SQL?
View 1 Replies
View Related
Apr 3, 2014
I want to loop through rows and append values to a declared variable. The example below returns nothing from Print @output, it's as if my @output variable is being reset on every iteration.
declare @i int,@output varchar(max)
set @i = 1
while @i < 10
begin
set @output = @output + convert(varchar(max),@i) + ','
print @output
set @i = @i +1
end
View 6 Replies
View Related
Mar 28, 2014
select '$ '+ CONVERT(varchar,CONVERT(decimal(10,0),CONVERT(money, Amt_Value)),1) as [Amount]
from Products
How can I sum this column values and need to set a validation like the column has null values it has to return zero.
View 2 Replies
View Related
Sep 26, 2007
Hi,
I have a table as follows
Table Master
{
Id varchar(20),
Cat1 datetime,
Cat2 datetime,
Cat3 datetime,
Cat4 datetime
}
and the data in the table is as follows
Table Master
{
Id cat1 cat2 cat3 cat4
-----------------------------------------------
1 d11 null d13 d14
2 d21 d22 d23 d24
3 NULL d32 d33 d34
4 d41 d42 NULL NULL
}
I want to retrive column names and its values wheb the ID matches to some value.
Can any one please let me know how to do this?
Thanks alot
~Mohan
View 3 Replies
View Related
Sep 21, 2007
Hi,
I have at table as foolows
Table Cat3
{
ID,
Update datetime
}
and also have a master table as follows
Table Master
{
ID,
Cat1 Datetime,
Cat2 datettime
}
My requirement is to alter themaster table schema i.e to add a column with the name as of the table name i.e Cat3 and will lok lie as foolows
Table Master
{
ID,
Cat1 Datetime,
Cat2 datettime,
Cat3 Datetime
}
I would like to insert the data to this column. The sample output is as follows
Before insertng the data of table ;Cat3' into the Master table
Table Master
{
Id Cat1 Cat2
---------------------------------
1 D1 D2
2 D2 NULL
3 D3 D4
}
And The Cat3 table data is as follows
Table Cat3
{
ID Update
--------------------------
1 D5
3 D6
4 D7
}
The final putput of the master table should be as follows
Table Master
{
Id Cat1 Cat2 Cat3
------------------------------------------------------
1 D1 D2 D5
2 D2 NULL NULL
3 D3 D4 D6
4 NULL NULL D7
}
Can any one please let me know the query to achieve this
Thank you very much for your time and support
~Moahn
View 10 Replies
View Related
Aug 7, 2007
Hello all. I hope someone can offer me some help. I'm trying to construct a SQL statement that will be run on a Dataset that I have. The trick is that there are many conditions that can apply. I'll describe my situation:
I have about 1700 records in a datatable titled "AISC_Shapes_Table" with 49 columns. What I would like to do is allow the user of my VB application to 'create' a custom query (i.e. advanced search). For now, I'll just discuss two columns; The Section Label titled "AISC_MANUAL_LABEL" and the Weight column "W". The data appears in the following manner:
(AISC_Shapes_Table)
AISC_MANUAL_LABEL W
W44x300 300
W42x200 200
(and so on)
WT22x150 150
WT21x100 100
(and so on)
MT12.5x12.4 12.4
MT12x10 10
(etc.)
I have a listbox which users can select MULTIPLE "Manual Labels" or shapes. They then select a property (W for weight, in this case) and a limitation (greater than a value, less than a value, or between two values). From all this, I create a custom Query string or filter to apply to my BindingSource.Filter method. However I have to use the % wildcard to deal with exceptions. If the user only wants W shapes, I use "...LIKE 'W%'" and "...NOT LIKE 'WT%" to be sure to select ONLY W shapes and no WT's. The problems arises, however, when the user wants multiple shapes in general. If I want to select all the "AISC_MANUAL_LABEL" values with W <= 40, I can't do it. An example of a statement I tried to use to select WT% Labels and MT% labels with weight (W)<=100 is:
Code SnippetSELECT AISC_MANUAL_LABEL, W
FROM AISC_Shape_Table
WHERE (W <= 100) AND ((AISC_MANUAL_LABEL LIKE 'MT%') AND (AISC_MANUAL_LABEL LIKE 'WT%'))
It returns a NULL value to me, which i know is NOT because no such values exist. So, I further investigated and tried to use a subquery seeing if IN, ANY, or ALL would work, but to no avail. Can anyone offer up any suggestions? I know that if I can get an example of ONE of them to work, then I'll easily be able to apply it to all of my cases. Otherwise, am I just going about this the hard way or is it even possible? Please, ANY suggestions will help. Thank you in advance.
Regards,
Steve G.
View 4 Replies
View Related
May 1, 2014
I have the following view.
The column prod_Master.M2_Pct is defined as float.Yet for some of the rows, the value in [% of Total Target] comes up as null even though there is a number in prod.Measure column. There is valid non-null data in prod_Master.M2_Pct.
I tried LTRIM(RTRIM(prod.Measure)), but no change.
Use ProdDB
SELECT TOP (100) PERCENT dbo.prod.ProdNo AS [Prod No], dbo.prod.ProdName AS [Prod Name],
CASE WHEN dbo.prod.Measure = 'P1' THEN dbo.prod_Master.P1_Pct
WHEN dbo.prod.Measure = 'P2' THEN dbo.prod_Master.P2_Pct
WHEN dbo.prod.Measure = 'P3' THEN dbo.prod_Master.P3_Pct
WHEN dbo.prod.Measure = 'P4' THEN dbo.prod_Master.P4_Pct
[code]....
View 3 Replies
View Related
May 31, 2015
I have a scenario to bold the total row coming from view.
SalesDate BrandName LeadTypeLeadsSalesCR%
01-Jun-2015XYZ ABC 81 1012.35 %
01-Jun-2015DEF ZXXYY 412 61.46 %
[code]<b>01-Jun-2015 XYZDEF Total 49316 3.25 %</b>
I have a SQL and I want to bold the Total row. I have been unable to do so. I have written a Stored proc to get the HTML table emailed.
View 1 Replies
View Related
May 29, 2014
I am writing a query to update table variable. It is throwing me some error.
I have a table variable declared and inserted the data with three columns. I want to update col1 of that table variable when the second column of that table variable= one column from a physical table
update @MYtabvar set @Mytabvar.LatestDate=B.LatestDate from TableB B where @Mytabvar.id=B.ID
View 9 Replies
View Related
Nov 28, 2014
I need to round UP values but they should never be rounded down, below is my expected output in RoundVal column.
SELECT 89 AS Val, 100 AS RoundVal UNION ALL
SELECT 329, 1000 UNION ALL
SELECT 6329, 10000 UNION ALL
SELECT 43299, 100000 UNION ALL
SELECT 155329, 1000000
View 1 Replies
View Related
Oct 14, 2014
With the data example below I am trying to consolidate the duplicate rows by flattening the dealer and billcode, or putting those values in each of the columns instead of creating separate rows...
74 MARTHA PATNE RIPLEY 1 23,327,76 ROTTINGDAM AAC SPRINGFIELD 3052 USA MPATRIP@AMERICANALARM.COM,MPATRIP@COMCAST.NET,PRIPLEY@ONECOMMUNICATIONS.COM
[table]
arnumbercustomernamedealerbillcodeaddl_addraddr1addr2branchcityzipcodecountryemaildefaultEmail
39SUSAN THALKER 2271BOTTOMWOOD RDAACHAMMOND02180-2703USASUWS3@COMCAST.NET1
56ANN REBELLO 123SHERIDAN AVEAACMEDFORD2155USANULLNULL
58DARRELL/PATTI SANDERS 6020DOTY AVENUEAACDANVERS1923USANULLNULL
74MARTHA PATNE RIPLEY 123ROTTINGDAM DRAACSPRINGFIELD3052USAMPATRIP@AMERICANALARM.COM1
74MARTHA PATNE RIPLEY 1327ROTTINGDAM DRAACSPRINGFIELD3052USAMPATRIP@COMCAST.NET1
74MARTHA PATNE RIPLEY 176ROTTINGDAM DRAACSPRINGFIELD3052USAPRIPLEY@ONECOMMUNICATIONS.COM1
[/table]
View 1 Replies
View Related
Aug 12, 2015
I need to merge column values (#Status.Status) based on OrderID onto #Orders.NewStausCombined field separated by commas .
CREATE TABLE #Status
(
ID INT IDENTITY (1,1) PRIMARY KEY,
OrderID INT,
Status VARCHAR(20)
)
INSERT INTO #Status ( OrderID, Status )
[code].....
View 3 Replies
View Related
Sep 25, 2014
I have two tables table1 and table2 and having a common column "col1"
When i ran the following query
UPDATE table1, table2 SET col1=FALSE WHERE id = 1;
getting the following error
Error Code: 1052 Column 'col1' in field list is ambiguous
id column exist in both the tables and need to update both the tables to false where the id is equivalent to 1.
how to achieve this in single query?
View 4 Replies
View Related
Nov 2, 2015
I have some transactions with the same card number that needs to add value amount to its existing balance. For example:
Card Number Balance Amount Issue Date Issue Branch.
4000111122223333 $100.00 10/1/2015 123 <= This is an existing row in Card Number SQL table.
Now, the same card number with additional $50 dollars that I want to add to this card number to make the total to become $150. This additional $50 is from another transaction table. On the contrary, I will have -$20 from the same card number in different transaction that I will need to deduce $150-$20 to become $130. How can I update the card number table with debit/credit transactions to keep the outstanding balance?
View 4 Replies
View Related
Dec 11, 2013
How do I write a query using the split function for the following requirement.I have a table in the following way
Identity Name Col1 Col2 Col3
1 Test1 1,2,3 200,300,400 3,4,6
2 Test2 3,4,5 300,455,600 2,3,8
I want an output in the following format
Identity Name Col1 Col2 Col3
1 Test1 1 200 3
1 Test1 2 300 4
1 Test1 3 400 6
2 Test2 3 300 2
2 Test2 4 455 3
2 Test2 5 600 8
If you see the data, first element in col1 is matched to first element in col2 and 3 after splitting the string.
View 2 Replies
View Related
Jan 21, 2014
How do I add column names as Total and SubTotal for NULL values.
SELECT DISTINCT
--[Group]
[Month]
,[Market]
,[Environment]
,[type]
, COUNT(*)
[code]....
View 9 Replies
View Related
Apr 23, 2014
I have a table that has the following structure:
EntryID int,
Categories varchar(200)
values look like:
541,'A,B,C'
345,'B,C'
234,'A,C'
657,'D,E'
435,'D'
what I want to do is extract the Categories column to a normalized separate table:
541,'A'
541,'B'
541,'C'
345,'B' ....
I found the split using the tally table useful to split one-by-one, but how can it be applied when you are referring to a table?
View 2 Replies
View Related
Sep 28, 2015
In a t-sql 2012, I want to declare variables with multiple values and I am having problems since sql server thinks I am working with numbers when I am really working with character and bit values. Here is a copy of the sql that I am trying to use:
DECLARE @Account varchar(100)
DECLARE @Processed bit
set @Account = '58100,98326,09897'
set @Processed ='0,1'
Thus would you show me what I can do so that the sql server knows that I want the values in the set states above to be varchar or character value for @Account and bit value for @Processed?
View 7 Replies
View Related
Mar 6, 2015
I am currently reading through Itzik Ben-Gan's "Microsoft SQL Server 2012 High-Performance T-SQL using Windows Functions." In attempt to test the SUM OVER() function in SQL 2008 because that's what I've got. I do not currently have sample data (trying to generate it has become a major PITA), but I have some pseudocode.
My current code (actual production code) pulls a bunch of ITD (inception to date) contracts then calculates a certain dollar amount based on monthly changes. Not all contracts have values during a given month, so here's what I cobbled together a few months ago. (Per our finance team, these numbers ARE accurate).
WITH MonthlyVals AS
(SELECT ContractID, SUM(Col1 - (Col2 + Col3 + Col4 + Col5)) AS MyTotal
FROM MyTable
WHERE MyDate >= @ThisMonthStartDate AND MyDate <= @ThisMonthEndDate
AND StatementType IN (8,4,2)
[code]....
To test the totals, I also added a COMPUTE SUM(MyTotal) to the end of each query. (Yes, I know COMPUTE is deprecated. Just wanted a quick check.). The difference between the two bits of code was over 68k, with the SUM OVER() code coming up with a total higher than the CTE code. I know CTE code is correct for a fact. It went through extensive testing before getting put in Production. Is it the way I joined the table for the SUM OVER()? Or is it the use of PARITION BY?
View 5 Replies
View Related
Jul 25, 2015
I have a four tables called plandescription, plandetail and analysisdetail. The table plandescription has the columns DetailQuestionID which is the primary and identity column and a QuestionDescription column.
The table plandetail consists of the column PlanDetailID which the primary and identity column, DetailQuestionID which is the foreign key attribute of plandescription table and a planID column.
The third table analysisdetail consists of a analysisID which the primary and identity column, PlanDetailID which is the foreign key attribute of plandetail table and a scenario.
Below is the schema of the three tables
I have a two web form that will insert, update and delete data into these three tables in a two transaction. One web form will perform CRUD operations in plandescription and plandetail table. When the user inserts QuestionDescription and planid in this web form, I will insert the QuestionDescription Value in the plandescription table and will generate a DetailQuestionID value and this value is fed to the plandetail table with the planid. Here I will generate a PlanDetailID.
Once this transaction is done, I will show the second web form in which the user enters the scenario and this will be mapped with the plandescription using the PlanDetailID.
This schema cannot be changes as this is the client requirement. When I insert values I don’t have any problem. However when I update existing data, I need to delete existing PlanDetailID in the plandetail table and recreate PlanDetailID data for that DetailQuestionID and planID. This is because, the user will be adding or deleting a planID associated with the QuestionDescription.
Once I recreate PlanDetailID for that DetailQuestionID and planID, I need to update the old PlanDetailID with the new PlanDetailID in the third table analysisdetail for the associated analysisID.
I created a #Temp table called #DetailTable to insert the values analysisID, planid and old PlanDetailID and new PlanDetailID so that I can have them in update statement once I delete the data from plandetail table for that PlanDetailID.
Then I deleted the plandetailid from the plandetail table and recreate PlanDetailID for that DetailQuestionID. During my recreation I fetched the new PlanDetailID’s created into another temp table called #InsertedRows
After this I am running a while loop to update the temp table #DetailTable with the newly created PlanDetailID for the appropriate planID’s. The problem is here. When I have the same number of planID’s for example 2 planID’s 1,2 I will have only two old PlanDetailID and new PlanDetailID for that planID and analysisID.But When I add a new PlanID or remove a existing planID I am getting null value for that newly added or deleted planID. This is affecting my update statement of analysisdetail table as PlanDetailID cannot be null.
I tried to remove the Null value from the #DetailTable by running the update statement of analysis detail in a while loop however its not working.
DECLARE @categoryid INT = 8
DECLARE @DetailQuestionID INT = 1380
/*------- I need the query to run for the below three data.
Here i'm updating my planids that already exists in my database*/
DECLARE @planids VARCHAR(MAX) = '2,4,5'
[code].....
View 2 Replies
View Related
May 22, 2008
My task is to bind and show 3 different values coming from three different queries into three different columns of GridView. I had done this as mention in below. Program was successful. But I want to excute these three queries in same Stored Procedure. I can do that and stored in seperated variables. I need help how to call these three different values in data adapters and store each value in three different columns of grid view.
Simply I want to below statement in stored procedures and call from program. Can any one help me plz.
con = DataBaseConnection.GetConnection();
DataSet ds = new DataSet();
SqlDataAdapter da = new SqlDataAdapter("select isnull(sum(PA_DAmt),0) from PA_Deposits where PA_UID = @PA_UID", con);
da.SelectCommand.Parameters.Add("@PA_UID", SqlDbType.Int).Value = Convert.ToInt32(Session["PA_UID"]);
da.Fill(ds,"Dep");
SqlDataAdapter da1 = new SqlDataAdapter("select isnull(sum(PA_EAmt),0) from PA_Expenses where PA_UID = @PA_UID", con);
da1.SelectCommand.Parameters.Add("@PA_UID", SqlDbType.Int).Value = Convert.ToInt32(Session["PA_UID"]);
da1.Fill(ds,"Exp");
SqlDataAdapter da2 = new SqlDataAdapter("select isnull(sum(PA_IAmt),0) from PA_Income where PA_UID = @PA_UID", con);
da2.SelectCommand.Parameters.Add("@PA_UID", SqlDbType.Int).Value = Convert.ToInt32(Session["PA_UID"]);
da2.Fill(ds,"Inc");
string deposits = Convert.ToString(ds.Tables["Dep"].Rows[0].ItemArray[0]);
string expenses = Convert.ToString(ds.Tables["Exp"].Rows[0].ItemArray[0]);
string income = Convert.ToString(ds.Tables["Inc"].Rows[0].ItemArray[0]);
GridView1.DataSource = ds;
GridView1.DataBind();
GridView1.Rows[0].Cells[0].Text = "Total";
GridView1.Rows[0].Cells[1].Text = deposits
GridView1.Rows[0].Cells[2].Text = expenses;
GridView1.Rows[0].Cells[3].Text = income;
//The above program was success.
// This is another way I had tried. But failed. I am getting Index out of bound error. Can any solve this if possible to u.
SqlCommand cmd = new SqlCommand("select isnull(sum(PA_DAmt),0) from PA_Deposits where PA_UID = @PA_UID", con);
cmd.Parameters.Add("@PA_UID", SqlDbType.Int).Value = (int)Session["PA_UID"];
GridView1.Rows[0].Cells[1].Text = cmd.ExecuteScalar().ToString();
cmd.CommandText = "select isnull(sum(PA_EAmt),0) from PA_Expenses where PA_UID = @PA_UID";
GridView1.Rows[0].Cells[2].Text = cmd.ExecuteScalar().ToString();
cmd.CommandText = "select isnull(sum(PA_IAmt),0) from PA_Income where PA_UID = @PA_UID";
GridView1.Rows[0].Cells[3].Text = cmd.ExecuteScalar().ToString();
ASPX Code for Grid View
<h2>Account Summary</h2><br />
<asp:GridView ID="GridView1" runat="server" AutoGenerateColumns="False" emptydatatext="There are no data records to display." Width="238px" >
<Columns>
<asp:TemplateField >
<ItemTemplate>
<asp:Label ID="Label1" runat="server" Text="Total"></asp:Label>
</ItemTemplate>
</asp:TemplateField>
<asp:TemplateField ><%--HeaderText="Deposits"--%>
<ItemTemplate>
</ItemTemplate>
<HeaderTemplate>
<a href="Deposits.aspx" >Deposits</a>
</HeaderTemplate>
<ItemStyle HorizontalAlign="Center" />
</asp:TemplateField>
<asp:TemplateField >
<HeaderTemplate>
<a href="Expenses.aspx">Expenses</a>
</HeaderTemplate>
<ItemStyle HorizontalAlign="Center" />
<ItemTemplate>
</ItemTemplate>
</asp:TemplateField>
<asp:TemplateField >
<HeaderTemplate>
<a href="Income.aspx">Income</a>
</HeaderTemplate>
<ItemStyle HorizontalAlign="Center" />
<ItemTemplate>
<%-- <%# Eval("Course") %>--%>
</ItemTemplate>
</asp:TemplateField>
</Columns>
</asp:GridView>
Plz solve this.
View 4 Replies
View Related
Oct 6, 2014
I am trying to use a stored procedure to update a column in a sql table using the value from a variable table I getting errors because my syntax is not correct. I think table aliases are not allowed in UPDATE statements.
This is my statement:
UPDATE [dbo].[sessions_teams] stc
SET stc.[Talks] = fmt.found_talks_type
FROM @Find_Missing_Talks fmt
WHERE stc.sessionid IN (SELECT sessionid FROM @Find_Missing_Talks)
AND stc.coupleid IN (SELECT coupleid FROM @Find_Missing_Talks)
View 2 Replies
View Related
Sep 7, 2015
Create report with SharePoint list. Columns are displaying on the report I used out of the group SUM function and it is group by report. one group total is showing correct total and other groups are showing wrong total and showing too much big value even there is whole column is empty.where value is not in column I am using "-" with IIF function. these columns are calculating by using date difference function between two date columns. these values coming with minus value . so ABS function is also using.
Columns calculation expression:
=IIF(ISNOTHING(Fields!DateCAPackage.Value)
OR (ISNOTHING(Fields!Date_CA_Application.Value)) ,
"-" , CINT(Abs(DateDiff("d",Fields!Date_CA_Application.Value,Fields!DateCAPackage.Value))))
Total calculation expression:
=Sum(ABS(DateDiff(
"d",Fields!Date_CA_Application.Value,Fields!DateCAPackage.Value)))
View 5 Replies
View Related
Apr 23, 2015
Is it possible to stop a query from running if a condition is not met?
I have a stored procedure that returns some email addresses. A condition is that a load of new data should have happened in the current month.
If a load of new data hasn't happened I want the stored procedure to stop and return an error message instead of returning the email addresses.
I have a variable that finds the maximum data load date and I thought I could use an IF... ELSE... to check if new data had been loaded. Like this:
DECLARE @MaxLoadDate as date = (select max(load_date)
from #table)
IF @MaxLoadDate<Dateadd(month, Datediff(month, 0, Getdate()), 0) --First Day of Current Month
<Something here to kill the query>
ELSE
SELECT email_address
FROM... etc
I've tried a couple of things like PRINT 'Error', and SET NO EXEC ON, but the query seems to happily carry on past the IF condition and return the email addresses. I know that data hasn't been loaded this month, so it should fail.
View 2 Replies
View Related
Feb 25, 2014
I have a very simple query like the following…
SELECT table2.column_code2,
table2.column_description2,
table2.column_code1,
table1.column_description1
FROM database_001.table2 table1 LFET OUTER JOIN database_001.table2 table1 on (table2.column_code1 = table1.column_code1)
From this query, its returning me a result set of something like below:
--------------------------------------------------------------------------------------------------
column_code1 column_description1 column_code2 column_description2
--------------------------------------------------------------------------------------------------
RO1 BOOK RL1 PDF/ECOPY
RO2 PAPER RL2 CONFERENCE
RO5 JOURNAL RL11 OTHER
Now, on the above query I want to insert three extra columns with the name (status, location and contact) where the results in the extra three columns would be based on the conditions I want to define in the query based on the above results…
Something for example (I am not trying to write a condition: my question is how to write it),
if column_code1 = RO1 and column_description2 = PDF/ECOPY on status column it should return a value ‘ONLINE’ & on location column it should return ‘WEB’ and on contact column it should write ‘BOB’.
Also, if column_code1 = RO5 and column_description1 = JOURNAL on status column it should return a value ‘ON PRESS FOR PRINT’ & on location column it should return ‘S.R STREET, LONDON’ and on contact column it should write ‘SMITH’ like below result…so the final output should be the top four columns and the extra three columns…
See the attachment for better formatting...
---------------------------------------------------------------------------------------------
status location contact
---------------------------------------------------------------------------------------------
ONLINE WEB BOB
ON PRESS FOR PRINT S.R STREET, LONDON SMITH
View 7 Replies
View Related
Sep 15, 2015
Lets say I have a set of columns as follows:
Table.Name - Table.ID - Table.Code
I want to write a query that will cycle through the results and if it comes across another record that has a matching Table.ID I want to exclude that row from the result set.
I am not all too familiar with how to use either a Case or If..Else Statement within a Sql statement that would accomplish this.
View 7 Replies
View Related
Oct 6, 2015
IF OBJECT_ID('tempdb..#test') IS NOT NULL
DROP TABLE #test
CREATE TABLE #test (TestID CHAR(5) NOT NULL PRIMARY KEY)
INSERT INTO #test
SELECT '1'
[code]....
i am trying to build a dynamic where "or" clause finding difficulties.
View 7 Replies
View Related
Nov 4, 2015
I have a field in a table that contains a different formula (varchar(1000)) for each record. It's along the lines of something like this, although each formula is different: ([ColumnA] - [ColumnB])/([ColumnC] - [ColumnD]). I plug that into a dynamic SQL statement so that it can get executed in a select statement.
Due to the variations of the formulas, checking for Divide by Zero, etc, we want to move this to a .NET method. We'd like to replace "ColumnA" and "ColumnB", etc., with the actual values so that we're passing something like (5-3)/(6-2). I haven't been able to figure out a way to do this without actually executing it. We don't want to pass the solution, but the equation filled with the actual values rather than the column names.
View 3 Replies
View Related
Mar 19, 2014
create table #sample
(
Name varchar(100),
value int
[code]....
From that I wanted to delete some records based on following condition. randomly select any number of records but sum(value) = 125 and name = xxx
View 2 Replies
View Related
Oct 12, 2015
I want to join 2 tables, table a and table b where b is a lookup table by left outer join. my question is how can i generate a flag that show whether match or not match the join condition ?
**The lookup table b for column id and country are always not null values, and both of them are the keys to join table a. This is because same id and country can have multiples rows in table a due to update date and posting date fields.
example table a
id country area
1 China Asia
2 Thailand Asia
3 Jamaica SouthAmerica
4 Japan Asia
example table b
id country area
1 China Asia
2 Thailand SouthEastAsia
3 Jamaica SouthAmerica
5 USA America
Expected output
id country area Match
1 China Asia Y
2 Thailand SouthEastAsia Y
3 Jamaica SouthAmerica Y
4 Japan Asia N
View 3 Replies
View Related
Mar 19, 2014
I have a table that lists math Calculations with "User Friendly Names" that look like the following:
([Sales Units]*[AUR])
([Comp Sales Units]*[Comp AUR])
I need to replace all the "User Friendly Names" with "System Names" in the calculations, i.e., I need "Sales Units" to be replaced with "cSalesUnits", "AUR" replaced with "cAUR", "Comp Sales Units" with "cCompSalesUnits", and "Comp AUR" with "cCompAUR". (It isn't always as easy as removing spaces and added 'c' to the beginning of the string...)
The new formulas need to look like the following:
([cSalesUnits]*[cAUR])
([cCompSalesUnits]*[cCompAUR])
I have created a CTE of all the "Look-up" values, and have tried all kinds of joins, and other functions to achieve this, but so far nothing has quite worked.
How can I accomplish this?
Here is some SQL for set up. There are over 500 formulas that need updating with over 400 different "look up" possibilities, so hard coding something isn't really an option.
DECLARE @Synonyms TABLE
(
UserFriendlyName VARCHAR(128)
, SystemNames VARCHAR(128)
)
INSERT INTO @Synonyms
( UserFriendlyName, SystemNames )
[Code] .....
View 3 Replies
View Related
