'SELECT E.EmployeeID FROM dbo.EmployeeGroupMapToEmployee E, dbo.Per_Budget B WHERE E.EmployeeID = B.PER_PERSONAL_ID AND B.PEB_Budget_id = 243 AND E.EmployeeGroupID IN (SELECT H.Id FROM dbo.EmployeeGroup H WHERE H.InstitutionsId = 22) GROUP BY E.EmployeeID '
If i Replace @EmpFilterAddDuty with this in a QUERY, it gives me the expected result, but if i try to execute the stored procedure.:
DECLARE@return_value int
EXEC@return_value = [dbo].[EP_Conterbalances]
@Start_Date_For_Totals_Date = N'20120831',
@EmpFilterAddDuty = 'SELECT E.EmployeeID FROM dbo.EmployeeGroupMapToEmployee E, dbo.Per_Budget B
[Code] .....
I get this error code:
Conversion failed when converting the varchar value 'SELECT E.EmployeeID FROM dbo.EmployeeGroupMapToEmployee E, dbo.Per_Budget B WHERE E.EmployeeID = B.PER_PERSONAL_ID AND B.PEB_Budget_id = 243 AND E.EmployeeGroupID IN (SELECT H.Id FROM dbo.EmployeeGroup H WHERE H.InstitutionsId = 22) GROUP BY E.EmployeeID ' to data type int.
I really do not understand why SQL 2012 tries to convert the value to an int, and I want to know how to pass the text string.
I have a stored procedure and in that I will be calling a stored procedure. Now, based on the parameter value I will get stored procedure name to be executed. how to execute dynamic sp in a stored rocedure
at present it is like EXECUTE usp_print_list_full @ID, @TNumber, @ErrMsg OUTPUT
I want to do like EXECUTE @SpName @ID, @TNumber, @ErrMsg OUTPUT
On SQL 2012 (64bit) I have a CLR stored procedure that calls another, T-SQL stored procedure.
The CLR procedure passes a sizeable amount of data via a user defined table type resp.table values parameter. It passes about 12,000 rows with 3 columns each.
For some reason the call of the procedure is verz very slow. I mean just the call, not the procedure.
I changed the procdure to do nothing (return 1 in first line).
So with all parameters set from
command.ExecuteNonQuery()to create proc usp_Proc1 @myTable myTable read only begin return 1 end
it takes 8 seconds.I measured all other steps (creating the data table in CLR, creating the SQL Param, adding it to the command, executing the stored procedure) and all of them work fine and very fast.
When I trace the procedure call in SQL Profiler I get a line like this for each line of the data table (12,000)
SP:StmtCompleted -- Encrypted Text.
As I said, not the procedure or the creation of the data table takes so long, really only the passing of the data table to the procedure.
We have a legacy database that have hundreds of stored procedures.
The previous programmar uses a string like servername.databasename.dbo.tablename in the stored procedures. We now have migrated the database to a new server. The old server is either needed to be replaced by the new server name, or remove it.
I don't know why he used servername as part of the fully qualified name, we don't use linked servers. So I think better removing the servername in all the stored procedures.
I know I can do a generate script, and replace the text and then use alter procedure to recreate all the stored procedures. But since hundreds of them, is there a programmatically way to replace them?
We need to create a pdf file from SQL server preferably from a stored procedure. Application will call the stored procedure and it should generate pdf. From my research it appears it can be done using various external tools with licensing/costs. But is it possible to do this within sql server database without additional costs? I read that this can be done by SSRS in SQL server but not sure if it is a good solution and if it is additional licensing..
I am having a Stored Procedure Or SQL Script to be attached to Job Scheduler. When this Stored procedure executes it generates some output text. I need to store this output to text file when ever this store Procedure (or) SQL Script executed by job Scheduler.
I've been tasked with creating a stored procedure which will be executed after a user has input one or more parameters into some search fields. So they could enter their 'order_reference' on its own or combine it with 'addressline1' and so on.
What would be the most proficient way of achieving this?
I had initially looked at using IF, TRY ie:
IF @SearchField= 'order_reference' BEGIN TRY select data from mytables END TRY
However I'm not sure this is the most efficient way to handle this.
I have a stored procedure that calls several views that rely on each other. In the past these views used to go parallel and use up all 100% of the CPU (12 cores), and now when the same stored procedure runs it only uses 8% of the CPU (1 core). This extends the time spent on the query from roughly 10-15 sec to 2-3min. I'm not quite sure why this is happening.
Are there some obvious things to look at when optimizing views to utilize all cores/threads? Also, it doesn't matter if I set Cost Threshold for Parallelism to 1 or 50 or 5, it is always the same, and I have Max Degree of Parallelism set to 0 as well, which should mean to use all cores when available.
I have a table with the list of all TableNames in the database. I would like to query that table and find any tables used in any stored procedure in that DB.
Select * from dbo.MyTableList where Table_Name in ( Select Name From sys.procedures Where OBJECT_DEFINITION(object_id) LIKE '%MY_TABLE_NAME%' Order by name )
Any way to have a process run that will not write its changes to the transaction log? I have a process that runs every three hours and has a huge impact on the transaction log (it becomes larger than the database itself). We do hourly backups of the transaction log and normally it is reasonably sized but when this process runs, it gets HUGE.
The process takes source data, massages it and writes it to summary tables. It is not something we need to track as we can recreate the summary tables if needed and it has no impact on the source tables.
Everything is driven through a stored procedure. Is there a way to run a stored procedure and tell it that nothing it does should be written to the transaction log?
In a t-sql 2012 stored procedure, I would like to know how I can complete the task I am listing below:
In an existing t-sql 2012 stored procedure, there is a table called 'Atrn' that is truncated every night. The Table 'Atrn' has a column called 'ABS' that is populated with incorrect data.
The goal is to place the correct value into 'ABS' column that is located in the Atrn table while the t-sql 2012 stored procedure is excuting.
**Note: The goal is to fix the problem now since it is a production problem. The entire stored procedure that updates the 'dbo.Atrn' table will be rewritten in the near future.
My plan is to:
1. create a temp table called '#Atrnwork' that will contain the columns called, Atrnworkid int, and ABSvalue with a double value.
2. The value in the column called Atrnworkid in the '#Atrnwork' table, will obtain its value from the key of the 'Atrn' called atrnid by doing a select into. At the same time, the value for ABSvalue will be obtained by running some sql when the select into occurs?
3. The main table called 'Atrn' will be changed with a update statement that looks something like:
Update Atrn set ABS = ABSvalue join Atrn.atrnid = #Atrnwork.Atrnworkid
In all can you tell me what a good solutiion is to solve this problem and/or display some sql on how to solve the problem listed above?
Our developers have gotten this idea lately that instead of having many small stored procedures that do one thing and have small parameter lists that SQL can optimize query plans for, its better to put like 8-10 different queries in the same stored procedure.
They tend to look like this:
create procedure UberProc (@QueryId varchar(50)) as
if @QueryId = 'First Horrible Idea' begin select stuff from something end if @queryid = 'Second really bad idea' begin select otherstuff from somethingelse end
I see the following problems with this practice:
1) SQL can't cache the query plan appropriately 2) They are harder to debug 3) They use these same sorts of things for not just gets, but also updates, with lots of optional NULLable parameters that are not properly handled to avoid parameter sniffing.
calculate age:CREATE PROCEDURE selectage ASSELECT Age = datediff(yy, birthday, getdate()) + case when datepart(dy, birthday) <= datepart(dy, getdate()) then 0 else -1endFROM nopaymy ? is how do fix this problem:I add inWHERE (((Age)>= @age1 And (Age)<= @age2)) and it will complain about Age is not a column, so how would i store the underlined and bold Age aboves value?
Currently I add a new stored procedure in Enterprise Manager by right-clicking Stored Procedure and clicking New Stored Procedure then copy/paste text of procedure into window displayed. Whenever we set up new customer, this process is repeated several times to get all of our stored procedures loaded. Is there a way to automate this process? Thanks
I have a SQL 2012 database that has 10 tables. One of the tables is populated by manual import from CSV file. Each time a user calls custom ASP.NET code., records get inserted into a table called forecast_data with incremental increase in FileID. So first import has FileID of 1, second import has FileID of 2 etc.
What I am trying to do is only keep the data that has the highest FileID (MAX(FileID). I would like to write a store procedure that removes all older data once a new import is written into the table.
Select columnname from tablename order by ordercolumn
We will call that "sp_foldersOfFile". It takes 1 parameter, a fileID (int) value.
The result when I execute this from within Management Studio is a single column of 1 to n rows. I want to use these values in another stored procedure like this:
Select @userCount = COUNT(*) from permissions where UserID = @userID and (projectid = @projectID or projectid=0) and clientid = @clientID and folderpermissions in (dbo.sp_FoldersOfFile(@fileID))
The Stored Procedure compiles but it does not query the folderpermissions in the selected values from the sp_FoldersOfFile procedure. I'm sure it is a syntax issue.
I have table named TEMPLATE_ACTIVITY. This is template table I have 27 this kind of tables.
I want to create stored procedure to change name MICHELIN_US_ instead of TEMPLATE_ all remaining name should be same. For that I am using 'Create Table As Select' to keep same structure as Template tables.
I want to create sp as like execute this way Exec @MICHELIN_US_
So that in future if Client change to MICHELIN_US_ to UNITED_ I can just change Exec @UNITED_
And it will change all table names to UNITED_ACTIVITY
Stored procedure A calls another stored procedure B. Rowcount is set properly in called procedure B, but does not seem to return it to calling procedure A. Otherwise the two stored procedures are working correctly. Here is the relevant code from the calling procedure A:
Print statement prints @NumBufferManagerRows as 0.
Here is the called stored procedure B:
CREATE PROCEDURE [persist].[LoadBufferManager] -- Add the parameters for the stored procedure here @StartTicks bigint, @EndTicks bigint, @TimeDiff decimal(9,2), @NumRows int OUTPUT
I got some xml that is essentially an html table that I need to turn into a standard table resultset from a stored proc. If you take this xml and save it as html that is the desired resultset I am looking for. I realize the <td> tags repeat so I would just prefer 'col' + positional index for the col name. Keep in mind that <td> could be is 1 to n.
I have around 100 packages (all [packages run at same time) each package calls a stored Procedure once the Stored proc Execution is completed the package will write the log information into a log table, here how can i capture the CPU and Memory usage for execution of each stored proc.
1.First i need to update the row if the status column is 0 to 1 2.Need to insert the row IF SegmentId=@SegmentId and SubjectId<>@SubjectId and StaffId=@StaffId 3.Need to insert the row IF StaffId<>@StaffId And ClassId=@ClassId and SegmentId<>@SegmentId and SubjectId<>@SubjectId
I have wrote the stored procedure to do this. But the problem is If do the update. It is reflecting in the database by changing 0 to 1. But it shows error like cannot insert the duplicate
Here is the stored Procedure what i have wrote
ALTER PROCEDURE [dbo].[InsertAssignTeacherToSubjects]
I have a data model with 7 tables and I'm trying to write a stored procedure for each table that allows four actions. Each stored procedure should have 4 parameters to allow a user to insert, select, update and delete a record from the table.
I want to have a stored procedure that can accept those 4 parameters so I only need to have one stored procedure per table instead of having 28 stored procedures for those 4 actions for 7 tables. I haven't found a good example online yet of conditional logic used in a stored procedure.
Is there a way to add a conditional logic IF statement to a stored procedure so if the parameter was INSERT, go run this statement, if it was UPDATE, go run this statement, etc?
We have around 5 SP’s which are inserting data into Table A,and these will run in parallel.From the temp tables in the SP,data will be loaded to Table A. We are getting deadlock here.No Begin and End Transaction used in the stored procedure.
