I have a scenario to bold the total row coming from view.
SalesDate BrandName LeadTypeLeadsSalesCR%
01-Jun-2015XYZ ABC 81 1012.35 %
01-Jun-2015DEF ZXXYY 412 61.46 %
[code]<b>01-Jun-2015 XYZDEF Total 49316 3.25 %</b>
I have a SQL and I want to bold the Total row. I have been unable to do so. I have written a Stored proc to get the HTML table emailed.
I have the following view.
The column prod_Master.M2_Pct is defined as float.Yet for some of the rows, the value in [% of Total Target] comes up as null even though there is a number in prod.Measure column. There is valid non-null data in prod_Master.M2_Pct.
I tried LTRIM(RTRIM(prod.Measure)), but no change.
Use ProdDB
SELECT TOP (100) PERCENT dbo.prod.ProdNo AS [Prod No], dbo.prod.ProdName AS [Prod Name],
CASE WHEN dbo.prod.Measure = 'P1' THEN dbo.prod_Master.P1_Pct
WHEN dbo.prod.Measure = 'P2' THEN dbo.prod_Master.P2_Pct
WHEN dbo.prod.Measure = 'P3' THEN dbo.prod_Master.P3_Pct
WHEN dbo.prod.Measure = 'P4' THEN dbo.prod_Master.P4_Pct
[code]....
I have a scenario to bold the total row coming from view.
SalesDateBrandNameLeadTypeLeadsSalesCR%
01-Jun-2015XYZLive811012.35 %
01-Jun-2015DEFOutbound41261.46 %
01-Jun-2015XYZDEFTotal493163.25 %
Just thought I'd point it out as something that needs fixing. This is inconsistent with every other MS product using the VS.net IDE framework.
I'd post it on Connect but then I'd wait 2 months to get "won't fix - this does not 'fit' with the current Katmai schedule" i.e. if I'm lucky (based on the new improved 3yr delivery of sql) it might get delivered in 2011. Wow.
Imagine if Xbox or PS3 designers told their customers, "sorry we know that up/down/left/right are in fact right/left/down/up, as you may expect on a game controller, but if you wait 3 years we might fix it"
I am trying to add a where condition on an ID column(type - INT) with values coming from a variable (type - STRING). i am using cast to cast the ID as Varchar and then apply the condition, but i am not getting any results back. following is an example of what i am trying to do.using temp table in the example , so you can copy the t-sql and run as is.
CREATE TABLE #TABLE1(ID INT)
INSERT INTO #TABLE1 VALUES (1), (2) , (3) , (4)
DECLARE @ID varchar(8000) = '2,4'
[code]....
I have a multi-tenant database where each row and each table has a 'TenantId' column. I have created a view which has joins on a CTE. The issue I'm having is that entity framework will do a SELECT * FROM MyView WHERE TenantId = 50 to limit the result set to the correct tenant. However it does not limit the CTE to the same TenantId so that result set is massive and makes my view extremely slow. In the included example you can see with the commented line what I need to filter on in the CTE but I am not sure how to get the sql plan executor to understand this or weather it's even possible.I have included a simplified view definition to demonstrate the issue...
ALTER VIEW MyView
AS
WITH ContactCTE AS(
SELECT Col1,
Col2,
TenantId
[code]....
I have written a script to pivot a table into multiple columns.
The script works when run on its own but gives an error when i try to create a view or aprocedure from the same script. The temporary table #.... does not work so i have converted it to a cte.
Here is a copy of the script below
-- Dynamic PIVOT
IF OBJECT_ID('#External_Referrals') IS NULL
DROP TABLE #External_Referrals;
GO
DECLARE @T AS TABLE(y INT NOT NULL PRIMARY KEY);
[Code] ....
We have a LKP table that we will use to decode incoming codes from multiple sales feeds to link to the relevant surrogate key for the ultimate dimension table.
The LKP table has a start date, end date and active row flag to track history of the codes.
This table in its entirety is required for the FULL history load but we will need a CURRENT version of the table containing only the ACTIVE rows for the DAILY incremental loading.
I am thinking of putting a standard view over the top of the LKP table to present only the ACTIVE rows rather than creating a 2nd table and reloading it each night. We don't have enterprise edition to use materialised views.
My question is, will the LKP cache populate as the SSIS packages begins, loading it with all the rows from the view, as it would if I used the 2nd physical table with only ACTIVE rows?
I have two databases DB1 and DB2 DB1 has a source table named 'Source' I have created a login 'Test_user' in DB2 with Public access. I have also created a view named 'Test_view' in DB2 which references data from DB1.dbo.Source
How can I do the following: AS A Test_user
SELECT * FROM DB2.dbo.Test_view --Should work
SELECT * FROM DB1.dbo.Source --Should Not work
How to find whether an object is used by any sp , view ?
I need a query which will result the sp , view names which uses the given object name .
I have created a view thats pulling data from two different tables to combine them into one report.
table 1 lists the client code and table 2 lists the client partner and they're linked by a variable.
When running the report the result shows the client codes with their respective partner however any client codes that didn't have a partner are not displaying in the report and I need all client codes to be displayed even if there's no partner.
Is there a way I can make this display all results and if the client partner doesn't exist for it to still display as 'Null' for the partner but still display the client code?
Script:
SELECT TOP (100) PERCENT C.cltCode AS ClientCode, C.cltSortName AS SortName, C.cltTerminationDate AS [Term date], dbo.vcltAttrib6.ainTVal AS Department,
C.objInstID AS ClientID
FROM dbo.cdbClient AS C INNER JOIN
dbo.vcltAttrib6 ON C.objInstID = dbo.vcltAttrib6.ainObjectInstID
GROUP BY C.cltSortName, C.cltTerminationDate, dbo.vcltAttrib6.ainTVal, C.objInstID, C.cltCode
ORDER BY ClientID
I would like to have rows presented as columns. That's why I use the PIVOT function at the end.The resultset will be presented in Excel using an external connection to the view.
When I try to save the view I get the error
Msg 4104, Level 16, State 1, Procedure _TEST, Line 47
The multi-part identifier "vk.OppCode" could not be bound.
Code (restricting the columns that I actually have to the relevant columns only):
USE [DBTest]
GO
/****** Object: View [dbo].[_TEST] Script Date: 23-10-2014 17:24:10 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
[code]....
I want to give developers access to view SQL Job history, but not let them inhert permission to create local jobs like they get with the fixed server roles.
how can this be achieved? Or can it only be achieved by giving them access to the tables in msdb and querying them?
I have a function that accespts a string and a delimeter returns the results in a temp table. I am using the funtion for one of the columns in my view that needs be to split and display the column into different columns. The view takes for ever to run and finally it doesn't split and doesn't display in the column.
Function:
-----------------------------------
ALTER FUNCTION [dbo].[func_Split]
(
@DelimitedString varchar(8000),
[Code].....
Not sure what I am missing in the above view why it doesn't split the string.
I have a view I've created which displays client sortname, partner and date added which displays 7 results.
When I add another table to this view to display the Industry it then only gives me 4 results as the other 3 results have no Industry instead of giving me the 7 results and showing the Industry column as empty for the other 3.
Is there a way I can make it show all 7 results and havethe column where the industry is empty display the other results instead of not displaying any results at all for them?
Script:
SELECT dbo.cdbClient.cltSortName AS ClientName, dbo.vcltAttrib4.ainTVal AS ClientPartner, dbo.vcltAttrib422.ainDVal AS [Date Added],
dbo.cdbAttribInst.ainTVal AS Inudstry
FROM dbo.cdbClient LEFT OUTER JOIN
dbo.cdbObject ON dbo.cdbClient.cltCategoryID = dbo.cdbObject.objID LEFT OUTER JOIN
[Code] ....
In the above script the cbdAttribInst table has the Industry column I need which is 'ainTVal'...
So we got ServerA.dbA and ServerB.dbB and looks like nobody thought about that MVew. IT works thru linked server now, so surely enough it sucks..
Then even more: we got piece of DW on ServerRep with replcicated pieces of ServerA and ServerB, how it works I asked: "Don't worry man, we took care of everything, go directly to ServerRep for everything..."
And I see that our MView sucks even deeper, practically 0 performance, I think what going on it's still hit that linked server between ServerA.dbA and ServerB.dbB on background.I still can use it on ServerRep WITH NOEXPAND hint, which means it was properly defined...
Can we have that scenario at all? Or we can replicate all Tables on ServerRep and then define/redefine this view directly on replicated server ?
I have a view that joins a dozen tables with a million rows added per year by an application. I want to materialize it. The view is always filtered by date first on reports, then there are a few key transaction keys, but then many other fields required to make each row unique. I don't want to add these columns since they are large, many, not used for sorting or filtering, and may not define uniqueness in a future application design. I need a uniqueifier that is application agnostic. I prefer a bigint. So to store the materialized view ideally for reporting, I want to add the following clustered index to materialize the view:
CREATE unique CLUSTERED INDEX idx1
ON [dbo].[myview](myDate, key1, key2, key3, id bigint identity(1,1) NOT NULL)
And I get this error:
Msg 102, Level 15, State 1, Line 3
Incorrect syntax near 'bigint'.
Can I do what I want? If so, how?
I have a table like below:
ItemIdAmountTax1Tax2SrvType
111 100 10 20 1
112 200 10 2
113 300 10 30 3
Now I want to create View that will have an exploded resultset based on SrvType.
For SrvType 1 and 2 there will be 2 lines per Itemid - One for 'Amount' anod another for 'Tax1+Tax2'. But for SrvType 3 there will be 3 lines per 'ItemId' - one for 'Amount', one for Tax1 and another for 'Tax2'.
I have a few hundred source records like this. Now sure how to achieve the exploded resultset with a View.
I can create a string into a local "@" variable. It can include a date/time, and text for my timing testing.
I need to be able to send that string to the results window where table output goes, rather than to the message window where a PRINT statement goes.
How do I do that?
Consider following code:
SELECT e1.EntityIdentity as CompanyID
FROM dbo.Entitye1 --company
JOIN dbo.EntityAssociationea
ON e1.EntityID = ea.EntityID1
JOIN dbo.Entitye2 --user
ON ea.EntityID2 = e2.EntityID
This query occurs as a sub-query in many stored procedures where exists a WHERE clause that includes CompanyID IN (above query).
Since dbo.Entity and dbo.EntityAssociation change infrequently I thought that an indexed view would really improve performance. But I've found one of the seemingly undocumented Microsoft features when trying to create the clustered index and get the following error msg:
Msg 1947, Level 16, State 1, Line 1
Cannot create index on view "ROICore.dbo.vEntityEntityAssociation_CompanyUser". The view contains a self join on "ROICore.dbo.Entity".
I really need to improve performance on this subquery. Entity currently has over 20m rows and EntityAssociation over 35m rows and both are growing.
How to improve performance? Indexes on both tables for the most part give index seeks, but I thought my saviour might be the index view. Obviously this will not work.
I am getting a warning message in my SQL Server 6.5 Error log file .
The warning is
Lazywriter: WARNING, LRU LIST IS EMPTY (177 FREE BUFS,358 TOTAL BUFS)
Please help to resolve this problem.
In one of my environments, I need to grant the ability to view all the logins and agent jobs to an account, but I don't want to give him "sysadmin" or "securityadmin".
View 2 Replies View RelatedI need to do testing on capturing connection coming from outside using Profiler. Basically I need to do something from other SQL servers connecting to this SQL server and test if it is captured by profiler.
View 4 Replies View RelatedI like to create an SQL view to divide amount 300,000 between 12 month starting from Month July 2014 to June 2015 as shown below
Amount Month Year
25,000 July 2014
25,000 August 2014
25,000 September 2014
25,000 October 2014
25,000 November 2014
25,000 December 2014
25,000 January 2015
25,000 February 2015
.
.
.
.
25,000 June 2015
We have a hierarchical table of some 2-3k of rows that grows slowly at only 3-5 rows a month, and is never likely to be above 5k, holding file/directory names with an IdParent int value pointing at that items immediate parent or NULL if root
Below is a sample:
Id Name IdParent
1 C: NULL
2 D: NULL
3 ProgramFiles 1
4 DataFiles 2
5 Excel.EXE 3
6 MyDataList.CSV 4
iterative code required to achieve the result I am looking for is best handled in the Application layer, but in this case the design brief is that we must get our results back as a View. Speed of execution and code clarity are secondary 'icing on the cake' issues.
I have tried recursive CTE's and XML FOR solutions but without success, and while I feel the latter is probably the best all rounder the searches I have made and the examples I have read do not seem to solve this particular issue.
Even to find the starting point of the search tree (i.e. the .EXE and the .CSV items) was difficult because the final slash is optional in some of the rows (.e. row 4)
The end result of my view on the above data should return:
Id FilePath
5 C:ProgramFilesExcel.EXE
6 D:DataFilesMyDataList.CSV (note the adding of the missing delimiter between DataFiles and MyDataList)
I have a table which stores date-of-birth in varchar 19861231(yyyymmdd). A view takes this data. I want to store this date as mmddyyyy in the view. How can we achieve this?
View 18 Replies View RelatedI have configured windows failover clustering 2012 on 4 of my test nodes.
I am trying to add another node into this cluster but its not happening. I am not even able to start the cluster service in services.msc
After installing windows failover clustering, when I go to the C:WindowsCluster folder, I am unable to find CLUSDB, CLUSDB.1.container, CLUSDB.2.container and CLUSDB.blf files in the folder.
These files are very much present on the other nodes where cluster service is running.
I tried copying these files manually to server where its missing but still no luck.
This feels like a question that has been asked 1000 times...I'm just not having much luck finding an answer.
I want to bold a single word in a Textbox on a RS2005 report. Is there a way to do this? The text is always bold. Like this:
By signing this document you accept our Terms and Conditions.
Thanks.
Brian
Hi,
Need help. I'm trying to format one of the field bold but need to do this in the expression. This is the example:
=Format(Fields!CMVendor.Value,"Bold") & chr(10) & Fields!CMContractNo.Value
Because I have two fields separated by line feed (chr(10)), I need to format the first field as bold. Obviously, that Format(...,"Bold") does not work. Anybody has came across this before, please enlighten.
Thanks in advance for any help.
I need to use Bulk insert statement for copying a table with 200 million rows to another table on the same server...the table has no primary key or identity column.... script for BULK INSERT ...
View 9 Replies View Related
Hi,
I'm trying to figure out how to insert a special character that will make the values in the column BOLD when I use that table as reference in my Word Mailmerge. For starters, I was able to insert char(10) as carriage return, so when I use the values from that table in my mailmerge, the char(10) is effective, meaning, the carriage returrn is working, but how about making the font bold? Please help.
Example is:
insert into table(customer_address)
values ("123 hayworth drive" + char(10) + "new land grove" + char(10) + "chicago" + char(10))
This value when used in a Word Mailmerge, will be displayed as:
123 hayworth drive
new land grove
chicago
Now, how do I insert a special character for bold font?
I have a string in which I am combining several fields. Is there a way to add formatting to the string as well
="Baud: " & Fields!BAUDRATE.Value & " DL Status: " & Fields!COMMSTATUS.Value
Example, I want my fields to appear in bold and string in normal.. I can't do this in an individual textbox due to space constraints
Any idea on how I do this?
Any advice welcome.........