SQL Server 2012 :: Calculation In CASE And Out
May 8, 2015
USE ODS_ST
/*
I am having trouble with the CASE statement when ">50". It comes out as zero (0) when according to the data in the example should be ".9".
*/
CREATE TABLE #CLASS_TIMES
(
START_TIME DATETIME,
END_TIME DATETIME
)
INSERT INTO #CLASS_TIMES (START_TIME, END_TIME)
SELECT '2015-05-08 10:00:00.000','2015-05-08 10:45:00.000' UNION ALL --The record in question
[Code] ...
View 0 Replies
ADVERTISEMENT
Feb 3, 2015
I have some location assignment data that I need to convert. I need to know how long each account spent in a certain location for each month of it's overall startdate/enddate period.
E.g.
Account 1 stayed in USA for 31 days in January, and 15 days in February.
Account 1 stayed in UK for 13 days in February and 26 days in March.
Etc.
create table #temp(account int, loc varchar(10), startdate datetime, enddate datetime)
insert into #temp select 1,'USA','2014-01-01','2014-02-15'
insert into #temp select 1,'UK','2014-02-16','2014-03-26'
insert into #temp select 1,'AU','2014-03-27','2014-06-07'
insert into #temp select 2,'UK','2014-08-15','2014-09-01'
insert into #temp select 2,'AU','2014-09-02','2014-10-17'
select * from #temp
drop table #temp
View 6 Replies
View Related
Aug 15, 2014
New column calculation
CREATE TABLE MAIN
(
ORDERNO VARCHAR(20),
LASTUPDATEDDATE DATE,
ORDERCLIENTINITIALFEE NUMERIC ,
[Code] .....
---OUTPUT
--=======
INSERT INTO MAIN VALUES ('1000', '1/1/2014',3000,1000,700,1500)
INSERT INTO MAIN VALUES ('1000', '3/5/2014',1000,2000,650,200)
INSERT INTO MAIN VALUES ('1000', '5/10/2014',500,5000,375,125)
INSERT INTO MAIN VALUES ('1000', '11/20/2014',100,2000,400,300)
INSERT INTO MAIN VALUES ('1000', '8/20/2014',100,3500,675,1300)
[Code] ....
View 2 Replies
View Related
Dec 4, 2014
I'm trying to get a calculation based on count(*) to format as a decimal value or percentage.
I keep getting 0s for the solution_rejected_percent column. How can I format this like 0.50 (for 50%)?
select mi.id, count(*) as cnt,
count(*) + 1 as cntplusone,
cast(count(*) / (count(*) + 1) as numeric(10,2)) as solution_rejected_percent
from metric_instance mi
INNER JOIN incident i
on i.number = mi.id
WHERE mi.definition = 'Solution Rejected'
AND i.state = 'Closed'
group by mi.id
id cnt cntplusone solution_rejected_percent
-------------------------------------------------- ----------- ----------- ---------------------------------------
INC011256 1 2 0.00
INC011290 1 2 0.00
INC011291 1 2 0.00
INC011522 1 2 0.00
INC011799 2 3 0.00
View 5 Replies
View Related
May 14, 2015
I am using Sql Server 2012.
This is how I calculate the ratio of failures in an order:
31 Days Table 1 query
sum(CASE
WHEN (datediff(dd,serDATE,'2015-01-21')) >= 31 THEN 31
WHEN (datediff(dd,serDATE,'2015-01-21')) < 0 THEN 0
ELSE (datediff(dd,serDATE,'2015-01-21'))END) as 31days1 .
How do i loop and pass dates dynamically in the Datediff?
31 Failures Table 2 query
SUM(Case when sometable.FAILUREDATE BETWEEN dateadd(DAY,-31,CONVERT(DATETIME, '2015-01-21 23:59:00.0', 102))
AND CONVERT(DATETIME, '2015-01-21 23:59:00.0', 102)Then 1 Else 0 END) As Failures31,31 Day Cal(Formula) combining both Table 1 and Table 2
((365*(Convert(decimal (8,1),T2.Failures31)/T1.31day))) [31dayCal]This works fine when done for a specific order.
I want a similar kind of calculation done for day wise and month wise.
2. what approach should I be using to achieve day wise and month wise calculation?
I do also have a table called Calender with the list of dates that i can use.
View 3 Replies
View Related
Jul 19, 2007
Hi I am having to convert some oracle reports to Reporting Services. Where I am having difficulty is with the
calculations.
Oracle
TO_DATE(TO_CHAR(Visit Date+Visit Time/24/60/60,'DD-Mon-YYYY HH24:MISS'),'DD-Mon-YYYY HH24:MISS')
this is a sfar as I have got with the sql version
SQLSERVER2005
= DateAdd("s",Fields!VISIT_DATE.Value,Fields!VISIT_TIME.Value246060 )
visit_date is date datatype visit_time is number datatype. have removed : from MI(here)SS as was showing as smiley.
using:
VS 2005 BI Tools
SQLServer 2005
View 5 Replies
View Related
Aug 5, 2014
My table structure like below.
id date value1 value2
1 5-june-2104 Yes No
1 6-june-2014 No Yes
2 5-june-2104 Yes Yes
Want to calculate yes count on any day for same id
View 5 Replies
View Related
Dec 20, 2013
I have a set of data where a column contains titles which have been formatted as follows:
"FirstWordSecondWordThirdWord...." etc.
That is, all the words have been concatenated but can be visually separated by their capital first letters.
For reporting purposes, I need to break this column into the separate words so that it looks like:
"First Word Second Word Third Word...." etc.
how this can be achieved?
View 9 Replies
View Related
Apr 21, 2014
I have a table called SrcReg which is having a column name called IsSortSeqNo smallint. I am mapping this column in SSIS and the problem comes when I try to execute against different database which has this table but the column name as ISSortSeqNo. I mean both databases having same name but one with upper case. So SSIS fails executing due to meta validation issue.Is there any way to check whether the column name is in small case or upper case through query?
View 8 Replies
View Related
Aug 4, 2015
I'm getting an error as "Incorrect syntax near the keyword 'CASE' ". When trying to run this query.
CREATE PROCEDURE dbo.SP_CDB_EA2
@RiskRef varchar(100)
--drop table #Tmp
AS
BEGIN
[code]....
View 9 Replies
View Related
Feb 4, 2014
Below is the scenario which I have currently in my query. I need to write this query without any hardcode values , so that it will work til n number of years without modifications.
Startdate =
CASE WHEN
Trandate between '06-04-2013' and '05-04-2014' then '06-04-2013'
Trandate between '06-04-2012' and '05-04-2013' then '06-04-2012'
Trandate between '06-04-2011' and '05-04-2012' then '06-04-2011'
Trandate between '06-04-2010' and '05-04-2011' then '06-04-2010'
Trandate between '06-04-2009' and '05-04-2010' then '06-04-2009'
Trandate between '06-04-2008' and '05-04-2019' then '06-04-2008'
END
View 5 Replies
View Related
Aug 20, 2014
Is this possible, I am trying to execute a stored procedure depending on what parameter is selected, something like this????
Case
when field = 'value' then execute sp_procedure else execute sp_procedure_2 end
case
View 1 Replies
View Related
Aug 21, 2014
How I am using a CASE statement within a WHERE clause to filter data:
CREATE PROCEDURE dbo.GetSomeStuff
@filter1 varchar(100) = '',
@filter2 varchar(100) = ''
AS
BEGIN
SELECT
[Code] .
What I want, is to be able to pass in a single value to filter the table, or if I pass in (at the moment a blank) for no filter to be applied to the table.
Is this a good way to accomplish that, or is there a better way? Also, down the line I'm probably going to want to have multiple filter items for a single filter, what would be the best way to implement that?
View 5 Replies
View Related
Oct 6, 2014
I have a bit of trouble getting values into one alias field, my code is below. I am trying to get values into the alias extension, Agent_ID is sometimes null, and so is agent_id2, however sometimes they both have values in them, and then only one of the values is every returned. When in the example below only Agent_ID (11111) is ever returned by I want both of them returned.
Agent_ID Agent_ID2
11111 22222
<code>
SELECT DISTINCT
CASE WHEN [AGENT_ID] is not null then AGENT_ID
when agent_id2 is not null then agent_id2 end as extension
FROM [AA_Helper].[dbo].[tblEmpData]
</code>
View 9 Replies
View Related
Oct 14, 2014
1. I have a simple JOIN statement between A and B, e.g. Cities A JOIN Countries B:
SELECT A.City_Name, B.Country_Code, B.Country_Area
FROM Cities A
JOIN Countries B
ON B.Country_Id = A.Country_Id
WHERE B.Country_Type='ABC';
That statement works absolutely fine, very fast (less than a second) and returns me 2 records
2. I need to replace Country Area column with 1 for Europe and 0 for all the rest. I implement so in the following way:
SELECT A.City_Name, B.Country_Code, CASE B.Country_Area WHEN 'EUR' THEN 1 ELSE 0 AS Country_Area
FROM Cities A
JOIN Countries B
ON B.Country_Id = A.Country_Id
WHERE B.Country_Type='ABC';
Now to get the same two records it takes 03:55 minutes (!)
I have looked into Estimated Execution Plan, but couldn't spot any difference - all straight forward.
It is SQL 2012 SP1 with compatibility level set to 110
View 9 Replies
View Related
Apr 9, 2014
Is this a correct syntax to populate a field name PHONES in my CUSTOMERS TABLE
case when(d.phone = (SELECT phone from CALLS where exists(select home_phone, mobile, toll_free from CALLS2) Then 1 END 'PHONES'
View 1 Replies
View Related
Oct 20, 2014
I have a stored proc that contains an update which utilizes a case statement to populate values in a particular column in a table, based on values found in other columns within the same table. The existing update looks like this (object names and values have been changed to protect the innocent):
UPDATE dbo.target_table
set target_column =
case
when source_column_1= 'ABC'then 'XYZ'
when source_column_2= '123'then 'PDQ'
[Code] ....
The powers that be would like to replace this case statement with some sort of table-driven structure, so that the mapping rules defined above can be maintained in the database by the business owner, rather than having it embedded in code and thus requiring developer intervention to perform changes/additions to the rules.
The rules defined in the case statement are in a pre-defined sequence which reflects the order of precedence in which the rules are to be applied (in other words, if a matching value in source_column_1 is found, this trumps a conflicting matching value in source_column_2, etc). A case statement handles this nicely, of course, because the case statement will stop when it finds the first "hit" amongst the WHEN clauses, testing each in the order in which they are coded in the proc logic.
What I'm struggling with is how to replicate this using a lookup table of some sort and joins from the target table to the lookup to replace the above case statement. I'm thinking that I would need a lookup table that has column name/value pairings, with a sequence number on each row that designates the row's placement in the precedence hierarchy. I'd then join to the lookup table somehow based on column names and values and return the match with the lowest sequence number, or something to that effect.
View 9 Replies
View Related
Apr 14, 2015
how SQL 2012 would treat a literal string for a comparison similar to below. I want to ensure that the server isn't implicitly converting the value as it runs the SQL, so I'd rather change the data type in one of my tables, as unicode isn't required.
Declare @T Table (S varchar(2))
Declare @S nvarchar(255)
Insert into @T
Values ('AR'), ('AT'), ('AW')
Set @S = 'Auto Repairs'
Select *
from @T T
where case @S when 'Auto Repairs' then 'AR'
when 'Auto Target' then 'AT'
when 'Auto Wash' then 'AW' end = T.STo summarise
in the above would AR, AT and AW in the case statement be treated as a nvarchar, as that's the field the case is wrapped around, or would it be treated as a varchar, as that's what I'm comparing it to.
View 3 Replies
View Related
Jun 3, 2015
I have an Address column that I need to Substring. I want to remove part of the string after either, or both of the following characters i.e ',' OR '*'
Example Record 1. Elland **REQUIRES BOOKING IN***
Example Record 2. Theale, Nr Reading, Berkshire
Example Record 3. Stockport
How do I achieve this in a CASE Statement?
The following two case statements return the correct results, but I some how need to combine them into a single Statement?
,LEFT(Address ,CASE WHEN CHARINDEX(',',Address) =0
THEN LEN(Address )
ELSE CHARINDEX(',' ,Address ) -1 END) AS 'Town Test'
,LEFT(Address ,CASE WHEN CHARINDEX('*',Address ) =0
THEN LEN(Address)
ELSE CHARINDEX('*' ,Address ) -1 END) AS 'Town Test2'
View 8 Replies
View Related
Sep 17, 2015
I have created calcalated measures in a SQL Server 2012 SSAS multi dimensional model by creating empty measures in the cube and use scope statements to fill the calculation.
(so I can use measure security on calculations
as explained here )
SCOPE [Measures].[C];
THIS = IIF([B]=0,0,[Measures].[A]/[Measures].[B]);
View 2 Replies
View Related
Aug 13, 2014
i was tasked to created an UPDATE statement for 6 tables , i would like to update 4 columns within the 6 tables , they all contains the same column names. the table gets its information from the source table, however the data that is transferd to the 6 tables are sometimes incorrect , i need to write a UPDATE statement that will automatically correct the data. the Update statement should also contact a where clause
the columns are [No] , [Salesperson Code], [Country Code] and [Country Name]
i was thinking of doing
Update [tablename]
SET [No] =
CASE
WHEN [No] ='AF01' THEN 'Country Code' = 'ZA7' AND 'Country Name' = 'South Africa'
ELSE 'Null'
END
What is the best way to script this
View 1 Replies
View Related
Aug 31, 2015
How can I change my T-SQL text editor from text sensitive to text insensitive?
View 2 Replies
View Related
Jan 6, 2005
Hello:
I have created an SQL server table in the past on a server that was all case sensative. Over time I found out that switching to a server that is not case sensative still caused my data to become case sensative. I read an article that said you should rebuild your master database then re-create your tables. So after rebuilding the master database, a basic restore would not be sufficient? I would have to go and manually re-create every single table again?
Any suggestions?
View 4 Replies
View Related
May 4, 2007
Can someone point me to a tutorial on how to search against a SQL Server 2000 using a case insensitive search when SQL Server 2000 is a case sensitive installation?
thanks in advance.
View 3 Replies
View Related
Aug 17, 2005
We need to install CI database on CS server, and there are some issueswith stored procedures.Database works and have CI collation (Polish_CI_AS). Server hascoresponding CS collation (Polish_CS_AS). Most queries and proceduresworks but some does not :-(We have table Customer which contains field CustomerID.Query "SELECT CUSTOMERID FROM CUSTOMER" works OK regardless ofcharacter case (we have table Customer not CUSTOMER)Following TSQL generate error message that must declare variable @id(in lowercase)DECLARE @ID INT (here @ID in uppercase)SELECT @id=CustomerID FROM Customer WHERE .... (here @id in lowercase)I know @ID is not equal to @id in CS, but database is CI and tablenames Customer and CUSTOMER both works. This does not work forvariables.I suppose it is tempdb collation problem (CS like a server collationis). I tried a property "Identifier Case Sensitivity" for myconnection, but it is read only and have value 8 (Mixed) by default -this is OK I think.DO I MISS SOMETHING ????
View 4 Replies
View Related
Jun 29, 2015
SELECT
SUM(((CASE WHEN
o.date>= a.activity_date, other filter condition, other filter condition
THEN
(select coalesce(d.balance,d2.balance) from drawtable d where coalesce(d.date, d2.date) < a.activity_date order by d.date desc limit 1) - ( select coalesce(d.balance, d2.balance) from drawtable d where coalesce(d.date, d2.date) = interval 'current date'
else end ))
from
emailtable a
LEFT JOIN opportunity o
left join drawtable d
left join drawtable d2
etc
The tricky part is I'm joining that same table twice.....would this be better in a max/min case when statement?
View 9 Replies
View Related
Jul 24, 2015
I have successfully built a messaging system into my application, I now in the process of displaying the messages in the UI.
The following are how my tables are constructed.
CREATE TABLE [MailBox].[Message](
[Id] [bigint] IDENTITY(1,1) NOT NULL,
[SenderId] [bigint] NOT NULL,
[Message] [nvarchar](max) NOT NULL,
[SentDate] [datetime] NOT NULL,
CONSTRAINT [PK_MailBox.Message] PRIMARY KEY CLUSTERED
[Code] .....
Now I haven't set the foreign key on the MessageReceipient table yet. When someone sends me an email I insert a record into [MailBox].[Message] and output the insert id into MessageReceipient along with the ReceipientId this is working as expected, when I then click on my inbox I call the following stored procedure:
Select p.Username, count(mr.RecipientId) [TotalMessages],
CASE
WHEN mr.ReadDate is null then 1 -- New message
WHEN mr.ReadDate is not null then 0 -- Message has been read
END AS NewMessage
FROM [User].[User_Profile] p
JOIN [MailBox].[Message] m on p.Id = m.SenderId
JOIN [MailBox].[MessageRecipient] mr on m.Id = mr.MessageId
GROUP BY p.Username, mr.RecipientId, mr.ReadDate
This will give me the person who has emailed me, the total amount of messages and if the message is new or its been read, I do this by checking the ReadDate column as shown in the case statement (but this gives me duplicates, which is not what I want). Lets say user1 emails me 5 times so when I call this proc I will have the same user displayed to me 5 times, what I'm trying to achieve with the proc is it will show User1 as the following:
User1 5 Messages 1 or 0 New Messages
I can get it to display as follow when I remove the case statement
User1 5 Messages
but as soon as I add the case statement back in then I get 5 rows.
How can I change this proc in such a way that it will display the data as follows;
User1 5 Messages 1 or 0 New Messages
New Messages is dependent on ReadDate if its null then we have a new message, otherwise its been read.
View 3 Replies
View Related
Aug 24, 2015
I'm trying to create a case statement that if a field = a certain code, I'd like to take another field * 0.9. But, I'm getting a Null value for the answer..here is the statement:,case when parts.ndc = '50242-0138-01' then labels.BAGSDISP*0.9 end "Units Dispensed"..For this example labels.BAGSDISP is a value of 2. So, in theory it should be 2 * 0.9 and the result should be 1.8 but I'm getting a NULL
View 9 Replies
View Related
Oct 1, 2015
I have a DistributorInvoiceNumber that can end with in 'R', 'A', 'CRR' or 'CR'.I am trying to write a case statement like so:
CASE WHEN RIGHT([ih].[DistributorInvoiceNumber],1) = 'A'
THEN 'ADJ'
WHEN RIGHT([ih].[DistributorInvoiceNumber],1) = 'R'
THEN 'REV'
WHEN RIGHT([ih].[DistributorInvoiceNumber],3) = 'CRR'
THEN 'REV'
WHEN RIGHT([ih].[DistributorInvoiceNumber],2) = 'CR'
THEN 'CREDIT'
ELSE NULL END AS 'Status'
For the most part the code is working, with the exception of the fields that just end in 'R'. An example of this is 471268R, 2525125901CRR, 11100325230CR
Basically if the number ends with an A, then its an Adjustment, if it ends with JUST an R, then its a Reversal; if it ends with just a CR then it is a Credit and if it ends with CRR then it is a Reversal (Credit Reversal). How can I differentiate between the different R's since three of them end with R? Would I use a RTRIM command somehow?
View 1 Replies
View Related
May 13, 2015
I am relatively new to complex queries and need creating a query using a CASE in order to update columns to be either A or B. A few things about this is that I am joining tables from linked servers as well. This is the last part. I execute the query and receive the error:
Incorrect syntax near the keyword 'from'.
select (select FirstName from [ZZZXXX].HCM.dbo.tPerson where PersonGUID = tPersonJobHistAlias.SupervisorPersonGUID) as supervisorFirstName,
(select LastName from [ZZZXXX].HCM.dbo.tPerson where PersonGUID = tPersonJobHistAlias.SupervisorPersonGUID) as supervisorLastName,
(select PersonID from [ZZZXXX].HCM.dbo.tPerson where PersonGUID = tPersonJobHistAlias.SupervisorPersonGUID) as SupervisorEmployeeID,
[Code] .....
View 4 Replies
View Related
Jun 15, 2015
Select * FROM TAB1 wher AI_TEXT_VALUE like '%PE%'
The unfortunate thing is i get entries like <Perennial allergic rhinitis>
I am looking specifically for the term PE ( All upper case ) But keep in mind, I would need to use the LIKE operator in my where clause.
( just like in the example above )
View 7 Replies
View Related
Sep 9, 2015
I'm trying to set up a statement that gives me a field called 'BINNO' if the payor = Commercial. But, I have a few customers that don't have Commercial. They have a Payor of Grant or Part D. How would I set up a statement that looks for Commerical 1st...then Grant or Part D. I started with this
case when inscomp.payor = 'COMMERCIAL' then INSCOMP.BINNO
View 9 Replies
View Related
Jul 9, 2014
I am selecting the count of the students in a class by suing select COUNT(studentid) as StCount FROM dbo.student But I need to use a case statement on this like if count is less than 10 I need to return 'Small class' if the count is between 10 to 50 then I need to return 'Medium class' and if the count is more than 50 then 'Big class'.
Right now I am achieving this by the following case statement
SELECT 'ClassSize' = CASE WHEN Stcount<10 THEN 'Small Class'
WHEN Stcount>=10 and StCount<=50THEN 'Medium Class'
WHEN Stcount>50 THEN 'Big Class'
END
FROM(
select COUNT(studentid) as Stcount FROM dbo.student) Stdtbl
But can I do this with just one select statement?
View 2 Replies
View Related