SQL Server 2012 :: Check To See If Multiple VALUES Exist In A Table

Dec 6, 2013

I know how to check for a sinle vlaue but how do I chekc to see if multiple values exist. I need to check for certain email addresses from a list that I have.

Let us say I ahve 3 email addresses, I want to check for all of them in a table and for eevery email address that is present I want to print something like "You email address is XXX" and if one of those 3 is not found my results should look like

"You email address is XXX"
YYYYY not found
"You email address is ZZZZ"

I'm attaching some TSQL that I tried on [AdventureWorks2012].[Person].[EmailAddress]

/****** Select ALL if where an email address is present in the list ******/
SELECT EmailAddressID,EmailAddress
FROM [AdventureWorks2012].[Person].[EmailAddress]
WHERE EmailAddress IN
(
'ken0@adventure-works.com', --1
'terri0@adventure-works.com', --2

[Code] ....

-- Test to see if a single email address is present

IF EXISTS
(
SELECT EmailAddress FROM [AdventureWorks2012].[Person].[EmailAddress]
WHERE EmailAddress IN ('25rob0@adventure-works.com')
)
BEGIN
SELECT 'Email address is presnt'

[Code] ....

When I check multiples using EXISTS it works as per its design and says YES even if a single item is present.

View 4 Replies


ADVERTISEMENT

SQL Server 2012 :: Update Table Based On Existing Values In Multiple Rows?

Oct 1, 2015

The objective is to identify orders where an order fee has been applied incorrectly. I have multiple orders per customer, my table contains an orderID and a customerID. Currently if the customer places additional orders before the previous orders have been closed/cancelled, then additional fees are being applied.

Let's say I'm comparing order #1 to order #2. I need to identify these rows where the following is true:-

The CustID is the same.

Order #2 has a more recent order date.

Order #2 has a FeeDate Before the CancelledDate of Order #1 (or Order #1 has no cancellation date).

So in the table the orderID:2835692 of CustID: 24643 has a valid order fee. But all the subsequently placed orders have fees which were applied before the first order was cancelled and so I want to update the FeeInvalid column with a 'Y'. The first fee will always be valid.

I think I understand why the code I am trying doesn't achieve the result I want but I can't figure out how to write it correctly. Below is one example of code I've tried and also code to create the table and insert some test data.

update t1
SET FeeInvalid = 'Y'
FROM MockData t1 Join MockData t2 on t1.CustID = t2.CustID
WHERE t1.CustID = t2.CustID
AND t2.OrderDate > t1.OrderDate
AND t2.FeeDate > t1.CancelledDate
CREATE TABLE [dbo].[MockData](
[OrderID] [float] NULL,

[code]....

View 4 Replies View Related

SQL 2012 :: Check Command That Ensures Only Certain Values Inserted In Table?

Jan 14, 2015

I am trying to create a check command that ensures only A'B','c','D','E','F','G and s1, s2 can be inserted in the table, is this even applicable? Heres my code:

Create Table GRADE (
GradeVARCHAR2(1) CONSTRAINT pk_Grade PRIMARY KEY
CONSTRAINT check_grade
CHECK (substr(Grade = 'A','B','c','D','E','F','G')),

Salary_Scale VARCHAR2(2) CONSTRAINT check_SScale
CHECK (substr(Salary_Scale = 'S1', 'S2')),
)
/

View 1 Replies View Related

SQL Server 2012 :: Insert Row With Values From Previous Row If Does Not Exist?

Jan 7, 2014

CREATE TABLE #MyTable
(
Teams VARCHAR(10),
StartDate DATETIME,
Count INT
)
INSERT INTO #MyTable (Teams,StartDate,Count)
SELECT 'Team A', '01/01/2014',10

[Code] ....

'Team A' Has No records for '01/02/2014' and '01/03/2014' so I need to insert values of '01/01/2014' StartDate for Team A for the missing dates

So 'Team A' will now have 3 records

Team A2014-01-01 00:00:00.00010
Team A2014-01-02 00:00:00.00010
Team A2014-01-03 00:00:00.00010

'Team B' Has No records for '01/03/2014' so I need to insert values of '01/02/2014' StartDate for Team B for the missing date

So 'Team B' will now have 3 records

Team B2014-01-01 00:00:00.00030
Team B2014-01-02 00:00:00.00040
Team B2014-01-03 00:00:00.00040

As for 'Team C' we have values for all 3 dates, no inserts needed.

View 3 Replies View Related

SQL Server 2012 :: Join To Find All Records From One Table That Do Not Exist In Other Table

Apr 29, 2014

I have table 'stores' that has 3 columns (storeid, article, doc), I have a second table 'allstores' that has 3 columns(storeid(always 'ALL'), article, doc). The stores table's storeid column will have a stores id, then will have multiple articles, and docs. The 'allstores' table will have 'all' in the store for every article and doc combination. This table is like the master lookup table for all possible article and doc combinations. The 'stores' table will have the actual article and doc per storeid.

What I am wanting to pull is all article, doc combinations that exist in the 'allstores' table, but do not exist in the 'stores' table, per storeid. So if the article/doc combination exists in the 'allstores' table and in the 'stores' table for storeid of 50 does not use that combination, but store 51 does, I want the output of storeid 50, and what combination does not exist for that storeid. I will try this example:

'allstores' 'Stores'
storeid doc article storeid doc article
ALL 0010 001 101 0010 001
ALL 0010 002 101 0010 002
ALL 0011 001 102 0011 002
ALL 0011 002

So I want the query to pull the one from 'allstores' that does not exist in 'stores' which in this case would the 3rd record "ALL 0011 001".

View 7 Replies View Related

SQL Server 2012 :: Add Columns To Result That Don't Exist In Table?

Oct 7, 2015

I am trying to produce a query result that will be using a Case statement to determine values based on scores in a table for each row. The result needs to be exported to be used to upload to a state reporting website. My problem is that the state requires in the CSV file that is uploaded a lot of fields that we do not actually have in the database table we are creating the result set from. After I receive my result set using the Case statement, is there a way to add additional columns that don't actually exist in a table so I can export directly from SQL?

View 6 Replies View Related

SQL Server 2012 :: Replace All Values In String With Values From Look Up Table

Mar 19, 2014

I have a table that lists math Calculations with "User Friendly Names" that look like the following:

([Sales Units]*[AUR])
([Comp Sales Units]*[Comp AUR])

I need to replace all the "User Friendly Names" with "System Names" in the calculations, i.e., I need "Sales Units" to be replaced with "cSalesUnits", "AUR" replaced with "cAUR", "Comp Sales Units" with "cCompSalesUnits", and "Comp AUR" with "cCompAUR". (It isn't always as easy as removing spaces and added 'c' to the beginning of the string...)

The new formulas need to look like the following:

([cSalesUnits]*[cAUR])
([cCompSalesUnits]*[cCompAUR])

I have created a CTE of all the "Look-up" values, and have tried all kinds of joins, and other functions to achieve this, but so far nothing has quite worked.

How can I accomplish this?

Here is some SQL for set up. There are over 500 formulas that need updating with over 400 different "look up" possibilities, so hard coding something isn't really an option.

DECLARE @Synonyms TABLE
(
UserFriendlyName VARCHAR(128)
, SystemNames VARCHAR(128)
)
INSERT INTO @Synonyms
( UserFriendlyName, SystemNames )

[Code] .....

View 3 Replies View Related

Check Constraint - Compare Sum Of Two Values In One Table Against Values Located In Another Table

Jul 26, 2014

I am relatively new to SQL and as a project I have been asked to create the SQL for a simple database to record train details. I want to implement a check constraint which will prevent data from being inserted into a table if the weight of the train is more than the maximum towing weight of the locomotive. FOr instance, I need to add the unladen weight and maximum capacity of each wagon (located in the wagon type table) and compare it against the locomotive maximum pulling weight (the locomotive class table). I have the following SQL but it will not work:

check((select SUM(fwt.unladen_weight+fwt.maximum_payload) from
hauls as h,freight_wagon as fw,freight_wagon_type as fwt,train as t where
h.freight_wagon_serial_number = fw.freight_wagon_serial_number and
fw.freight_wagon_type = fwt.freight_wagon_type and
h.train_number = t.train_number) <
(select lc.maximum_towing_weight from locomotive_class as lc,locomotive as l,train as t where
lc.locomotive_class = l.locomotive_class and l.locomotive_serial_number = t.locomotive_serial_number))

The hauls table is where the constraint has been placed and is the intermediary table between train and freight wagon.

I may not have explained this very well; but in short, i need to compare the sum of two values in one table against a values located in another table...At present I keep getting a message telling me the sub query cannot return more than one row.

View 2 Replies View Related

SQL Server 2012 :: Return Values With Multiple Entries Only

May 9, 2014

Very basically, I need to return a result set based on another value and only if there are multiples of that other value.

Example. select * from mytable

Returns (--column separater)

John---1---1
John---1---1
John---2---2
John---3---3
John---3---3
John---4---4

So I want a query that would return only

John---1---1
John---1---1
John---3---3
John---3---3

The query cannot be something as simple as this:

Select * from mytable where John=1 or John=3

I have to many possible results to plan like that. I am thinking some kind of aggregate with a group.

View 9 Replies View Related

SQL Server 2012 :: Putting Multiple Values In The Variables?

Jan 28, 2015

how can i put multiple values in the variables.

for eg:

Declare @w_man as varchar
set @w_man = ('julial','BEVERLEYB', 'Lucy') and few more names.

I am getting syntax error(,)

View 5 Replies View Related

SQL Server 2012 :: When Invoice Contains Multiple Values Set Value Equal To A Value

May 18, 2015

All I have a table full of invoices and in that table there is a field named HCC. An invoice can contain multiple HCC's. I also have a table named hierarchical codes (below is an example)

(COL1)HCC...........(COL2)If any of the HCCs in this column exist on an invoice along with the HCC in column 1 then use HCC listed in column one
1
2
3.......................4
4
6
8.......................9 ,10 ,11 ,12 ,13

[code]...

I want to return invoice 1 with HCC set to 34 since the hierarchy for when any of these HCCs (35 ,36 ,37 ,38) exist on an invoice along with 34 is 34.

View 4 Replies View Related

SQL Server 2012 :: Replace Multiple Values Without Looping

Jul 13, 2015

I need one query...

create table #task(TaskId bigint unique, Name varchar(2000))
insert into #task values(1, 'Text Text Text Text Text Text Text <<Name>> Text Text Text <<Salary>>')
insert into #task values(2, 'Text Text Text <<Name>> Text Text Text Text <<Company>> Text Text Text <<Salary>> Text Text Text')
-- select * from #task

[Code] ....

Now I need to create an inline function who resolve the task name with appropriate values and return me the resolved task name

select * from fn_TaskResolver(1, 'Text Text Text Text Text Text Text <<Name>> Text Text Text <<Salary>>')

I try this function but its return multiple rows as i just want to return one row. as I have big data set so i don't want to use scaler or Multi Line function.

create function fn_TaskResolver(@TaskId bigint, @name varchar(2000)
Return table
as
return
(
with data as

[Code] ....

View 7 Replies View Related

SQL Server 2012 :: Splitting Column Values In Multiple Columns And Assigning It To Row

Dec 11, 2013

How do I write a query using the split function for the following requirement.I have a table in the following way

Identity Name Col1 Col2 Col3
1 Test1 1,2,3 200,300,400 3,4,6
2 Test2 3,4,5 300,455,600 2,3,8

I want an output in the following format

Identity Name Col1 Col2 Col3
1 Test1 1 200 3
1 Test1 2 300 4
1 Test1 3 400 6
2 Test2 3 300 2
2 Test2 4 455 3
2 Test2 5 600 8

If you see the data, first element in col1 is matched to first element in col2 and 3 after splitting the string.

View 2 Replies View Related

SQL Server 2012 :: Row Counts Based On Distinct Values From Multiple Tables

Jan 15, 2015

I am trying to create a query that outputs the following data from multiple tables. Here is an example of the raw data right now

Date | MachineNumber | TestName
---------------------------------------
1/1/2015 | 500 | Something
1/1/2015 | 500 | Something
1/1/2015 | 500 | Something
1/1/2015 | 500 | Something
1/1/2015 | 510 | NewTest
1/1/2015 | 510 | NewTest
1/1/2015 | 510 | NewTest
1/1/2015 | 620 | Test#1

Here is the desired counted output, I would like to pull distinct Date, MachineNumber, TestName and then count how many times they occur in the raw data form.I do need to perform a case on the date because right now its in a datetime format and I only need the date.

Date | MachineNumber | TestName | TestOccuranceCount
-----------------------------------------------------------------
1/1/2015 | 500 | Something | 4
1/1/2015 | 510 | NewTest | 3
1/1/2015 | 620 | Test#555 | 1

I am pulling three columns with the same names from 8 different tables. What I need to display the date, machine & test name and count how many times a test was run on a machine for that date. I have a feeling this can be handled by SSAS but haven't built an analysis cube yet because I am unfamiliar with how they work. I was wondering if this is possible in a simple query. I tried to set something up in a #Temp table. Problem is the query takes forever to run because I am dealing with 1.7 Million rows. Doing an insert into #temp select columnA, columnB, columnC from 8 different tables takes a bit.

View 9 Replies View Related

SQL Server 2012 :: How To Replace Multiple Values In Single Select Statement

Aug 18, 2015

how we can replace the multiple values in a single select statement? I have to build the output based on values stored in a table. Please see below the sample input and expected output.

DECLARE @V1 NVARCHAR(100)
SELECT @V1 = 'FirstName: @FN, LastName: @LN, Add1: @A1, Add2: @A2 '
DECLARE @T1 TABLE
(FN VARCHAR(100), LN VARCHAR(100), A1 VARCHAR(100), A2 VARCHAR(100))

[code]....

View 7 Replies View Related

Check To See If File Exist On Server

Nov 9, 2007

Hi Folks,

I'm attempting to check to see if a file exists on our server before showing a link it.

I put this function in the Report Properties:




Code Block
Function isFile(PathFileName As String) As Boolean
Return isFile = System.IO.FileExists(PathFileName)
End Function



I chose a situation where I'm getting back two rows of data, one row is true and the other row is false however, when I run the report they're both coming back as 'True'.

We created a virtual directory to the file system that houses our files, so my PathFileName variable will contain something like http://Sales/North/Sales110907.pdf.

Can I use the FileExists in this fashion or am I going down the wrong path?

I appreciate any help you can give.

Best regards,

View 7 Replies View Related

SQL 2012 :: How To Check Existing Values In A Column For Duplicates Before Inserting

Aug 12, 2014

I have the following objective:

1. I want to check a column to see if there are values (to Eliminate dups)
2. Once checked the values in a column, if not found insert the new value

Here is my code for this:

ALTER TRIGGER DUPLICATES ON AMGR_User_Fields_Tbl
-- When inserting or updating
AFTER INSERT, UPDATE AS

-- Declare the variables
DECLARE @AN varchar(200)

[Code] ....

View 1 Replies View Related

Transact SQL :: Update One Table Based On Another Table Values For Multiple Values

Apr 26, 2015

I have two tables  A(uname,address,full_name) and B(uname,full_name). I want to update table A for all matching case of uname in table B. 

View 5 Replies View Related

SQL Server 2012 :: Create New Table From Multiple Table?

Feb 19, 2015

I need to create a table from these 2 tables and want all the data. Table 1 has 15000 records and table has around 1000 records.

I have 2 tables.

SELECT [UniqueID]
,[Company]
,[CustID]
,[CustomerName]
,[FiscYr]

[Code] ....

View 5 Replies View Related

SQL Server 2012 :: Script For Integer Values Used In A Table

Dec 29, 2014

I'm looking for a script that identifies max values used in a table for all smallints, ints and bigints to determine if they are being used correctly.

View 3 Replies View Related

SQL Server 2008 :: Table Valued Function Where Parameter Has Multiple Values

Jan 29, 2015

Is it possible to pass multiple values to a TVF, such as using an IN clause?

View 6 Replies View Related

SQL Server 2012 :: Insert Values In A Single Table With Four Columns From 4 Different Sources?

Jan 30, 2014

I am trying to insert values in a single table with four columns from 4 different sources. is it possible to run these 4 insertions in parallel. all these insertion are independent of each other

View 3 Replies View Related

SQL Server 2012 :: Normalize Values From Column Split Using Tally Table?

Apr 23, 2014

I have a table that has the following structure:

EntryID int,
Categories varchar(200)

values look like:

541,'A,B,C'
345,'B,C'
234,'A,C'
657,'D,E'
435,'D'

what I want to do is extract the Categories column to a normalized separate table:

541,'A'
541,'B'
541,'C'
345,'B' ....

I found the split using the tally table useful to split one-by-one, but how can it be applied when you are referring to a table?

View 2 Replies View Related

Check Table Values In The Store Procedure...

Oct 22, 2007

HI
I have a problem related Store Procedure, that i  am trying to extact a  value from Database (Like FirstName,LastName,Email Address) through Store Procedure and Display it in the DropDownList(Like: FirstName LastName ,(xyz@xyz.com)) , and this is working correctly.
Now i try to check the value at the same time if it is NULL value in the Database then pass EmptyString to the DropDownList Like ("" "" ,(xyz@xyz.com))
how i can do that in the store procedure.
Comments will be appreciated.

View 3 Replies View Related

SQL Server 2012 :: Sales Over Years - Retrieve Values In Single Query For Multiple Years And Grand Total?

Apr 24, 2015

I need to list customers in a table that represents sales over the years.

I have tables:

Customers -> id | name |...
Orders -> id | idCustomer | date | ...
Products -> id | idOrder | unitprice | quantity | ...

I am using this SQL but it only gets one year:

SELECT customers.name , SUM(unitprice*qt) AS total
FROM Products
INNER JOIN Orders ON Orders.id = Products.idOrder
INNER JOIN Customers ON Customers.id = Orders.idCustomer
WHERE year(date)=2014
GROUP BY customers.name
ORDER BY 2 DESC

I need something like this:

customer | total sales 204 | total sales | 2015 | total sales (2014 + 2015)
--------
customer A | 1000$ | 2000$ | 3000$
customer B | 100$ | 100$ | 200$

Is it possible to retrieve these values in a single SQL query for multiple years and grand total?

View 6 Replies View Related

SQL Server 2012 :: Multiple Level Join On Same Table?

Oct 10, 2015

i have below queries each select is fetching records at one level. Is there a way i can write single query to get to nth level (recursion) instead joining same table 10 times (i don't know in some cases there is may be next level) I stopped at 10th level now. In below example i gave only two levels.

SELECT Distinct
a.Col1 AS EmpID,
a.Col1 AS EmpID,
a.Col2 AS Emp_guid,
a.Col2 AS Emp_guid,
case

[code].....

View 1 Replies View Related

SQL Server 2014 :: How To Update Values Based On Column Into Multiple Columns In Another Table

Jul 31, 2015

I have a table #vert where I have value column. This data needs to be updated into two channel columns in #hori table based on channel number in #vert table.

CREATE TABLE #Vert (FILTER VARCHAR(3), CHANNEL TINYINT, VALUE TINYINT)
INSERT #Vert Values('ABC', 1, 22),('ABC', 2, 32),('BBC', 1, 12),('BBC', 2, 23),('CAB', 1, 33),('CAB', 2, 44) -- COMBINATION OF FILTER AND CHANNEL IS UNIQUE
CREATE TABLE #Hori (FILTER VARCHAR(3), CHANNEL1 TINYINT, CHANNEL2 TINYINT)
INSERT #Hori Values ('ABC', NULL, NULL),('BBC', NULL, NULL),('CAB', NULL, NULL) -- FILTER IS UNIQUE IN #HORI TABLE

One way to achieve this is to write two update statements. After update, the output you see is my desired output

UPDATE H
SET CHANNEL1= VALUE
FROM #Hori H JOIN #Vert V ON V.FILTER=H.FILTER
WHERE V.CHANNEL=1 -- updates only channel1
UPDATE H
SET CHANNEL2= VALUE
FROM #Hori H JOIN #Vert V ON V.FILTER=H.FILTER
WHERE V.CHANNEL=2 -- updates only channel2
SELECT * FROM #Hori -- this is desired output

my channels number grows in #vert table like 1,2,3,4...and so Channel3, Channel4....so on in #hori table. So I cannot keep writing too many update statements. One other way is to pivot #vert table and do single update into #hori table.

View 5 Replies View Related

SQL Server 2012 :: Insert Rows Based On Number Of Distinct Values In Another Table

May 20, 2014

I have a table with PO#,Days_to_travel, and Days_warehouse fields. I take the distinct Days_in_warehouse values in the table and insert them into a temp table. I want a script that will insert all of the values in the Days_in_warehouse field from the temp table into the Days_in_warehouse_batch row in table 1 by PO# duplicating the PO records until all of the POs have a record per distinct value.

Example:

Temp table: (Contains only one field with all distinct values in table 1)

Days_in_warehouse
20
30
40

Table 1 :

PO# Days_to_travel Days_in_warehouse Days_in_warehouse_batch
1 10 20
2 5 30
3 7 40

Updated Table 1:

PO# Days_to_travel Days_in_warehouse Days_in_warehouse_batch
1 10 20 20
1 10 20 30
1 10 20 40
2 5 30 20
2 5 30 30
2 5 30 40
3 7 40 20
3 7 40 30
3 7 40 40

How can I update Table 1 to see desired results?

View 3 Replies View Related

SQL 2012 :: SSRS Report Not Displaying Time Values Correctly From Server Table

Feb 26, 2015

I am having problems displaying time values in my SSRS report. below is info. Tried expressions still does not work. I want the values to show what in the SQL Server table 00:00:00.82. I tried stored proc still does not work.

SQL Server table time value shown in milliseconds:
00:00:00.82

Reporting Services report value shown:
00:00:00

View 3 Replies View Related

SQL Server 2012 :: Dynamic Table Pivot With Multiple Columns

Jan 23, 2014

I am trying to pivot table DYNAMICALLY but couldn't get the desired result .

Here is the code to create a table

create table Report
(
deck char(3),
Jib_in float,
rev int,
rev_insight int,
jib_out float,

[Code] .....

Code written so far. this pivots the column deck and jib_in into rows but thats it only TWO ROWS i.e the one i put inside aggregate function under PIVOT function and one i put inside QUOTENAME()

DECLARE @columns NVARCHAR(MAX), @sql NVARCHAR(MAX);
SET @columns = N'';
SELECT @columns += N', p.' + QUOTENAME(deck)
FROM (SELECT p.deck FROM dbo.report AS p
GROUP BY p.deck) AS x;

[Code] ....

I need all the columns to be pivoted and show on the pivoted table. I am very new at dynamic pivot. I tried so many ways to add other columns but no avail!!

View 1 Replies View Related

SQL Server 2012 :: Merge Multiple Rows From Single Table

Nov 17, 2014

I have resulting rows from a query similar to the following:

The data is coming from a single table that contains only one coverage code column and one coverage code date, but the end user wants the two coverage code types and dates combined into a single row. So the SELECT looks something like this:

SELECT
[Employee ID] = emp.employee_id,
[Coverage Code 1] = enr.coverage_code,
[Coverage Date 1] = enr.coverage_date,
[Coverage Code 2] = case when enr.product_type = 'Accident.Accident'
then enr.coverage_code else NULL end,

[Code] ....

I basically want to merge the like Employee ID's together into a single row like the following:

I know I have done this before and it is probably pretty simple.

View 4 Replies View Related

SQL Server 2012 :: Insert XML (with Multiple Nodes ) Into Table With Query

Dec 9, 2014

My xml is in below format:

DECLARE @MyXML XML
SET @MyXML = '<RS>
<R id="6330">
<WF id="71445">
<WFS id="12790"> <fname>John12790</fname> </WFS>

[Code] ....

I need to insert into table with TSQL query:

My output should be similar below:

John12790 12790 71445 6330
Eric 12791 12790 71445 6330
John12793 12793 71446 6331
Eric12794 12794 71446 6331

otherwise i need to write huge c# code to execute such thing..

View 2 Replies View Related

SQL Server 2012 :: How To Add Column To Multiple Table Using Single Script

Feb 12, 2015

I am looking a script which allow me add single coilumn to multiple table of my database.

For Example :-

I am having 4 table

1-Emp , 2-Dept , 3-Location , 4-Salary like this I have around 100 of table

Now I want to run below command to add column Rowchecksum in all table where table name start with Archivebbx keywords.

Alter table EMP
Add Rowchecksum varbinary(8000)

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved