SQL Server 2012 :: Convert Rows To Columns Using Dynamic PIVOT Table
Feb 3, 2015
I have this query:
SELECT TOP (100) PERCENT dbo.Filteredfs_franchise.fs_franchiseid AS FranchiseId, dbo.Filteredfs_franchise.fs_brandidname AS Brand,
dbo.Filteredfs_franchise.fs_franchisetypename AS [Franchise Type], dbo.Filteredfs_franchise.fs_franchisenumber AS [Franchise Number],
dbo.Filteredfs_franchise.fs_transactiontypename AS [Transaction Type], dbo.Filteredfs_franchise.fs_franchisestatusname AS [Status Code],
[Code] ....
I need to pivot this so I can get one row per franchiseID and multiple columns for [Franchisee Name Entity] and [Franchise Name Individual]. Each [Franchisee Name Entity] and [Franchise Name Individual] has associated percentage of ownership.
This has to be dynamic, because each FranchiseID can have anywhere from 1 to 12 respective owners and those can be any combination of of Entity and Individual. Please, see the attached example for Franchise Number 129 (that one would have 6 additional columns because there are 3 Individual owners with 1 respective Percentage of ownership).
The question is how do I PIVOT and preserve the percentage of ownership?
View 3 Replies
ADVERTISEMENT
Jan 23, 2014
I am trying to pivot table DYNAMICALLY but couldn't get the desired result .
Here is the code to create a table
create table Report
(
deck char(3),
Jib_in float,
rev int,
rev_insight int,
jib_out float,
[Code] .....
Code written so far. this pivots the column deck and jib_in into rows but thats it only TWO ROWS i.e the one i put inside aggregate function under PIVOT function and one i put inside QUOTENAME()
DECLARE @columns NVARCHAR(MAX), @sql NVARCHAR(MAX);
SET @columns = N'';
SELECT @columns += N', p.' + QUOTENAME(deck)
FROM (SELECT p.deck FROM dbo.report AS p
GROUP BY p.deck) AS x;
[Code] ....
I need all the columns to be pivoted and show on the pivoted table. I am very new at dynamic pivot. I tried so many ways to add other columns but no avail!!
View 1 Replies
View Related
Mar 5, 2015
I have a lookup table, as below. Each triggercode can have several service codes.
TriggerCodeServiceCode
BBRONZH BBRZFET
BBRONZH RDYNIP1
BBRONZP BBRZFET
BCSTICP ULDBND2
BCSTMCP RBNDLOC
I then have a table of accounts, and each account can have one to many service codes. This table also has the rate for each code.
AccountServiceCodeRate
11518801DSRDISC -2
11571901BBRZFET 5
11571901RBNDLOC 0
11571901CDHCTC 0
17412902CDHCTC1 0
14706401ULDBND2 2
14706401RBNDLOC 3
What I would like to end up with is a pivot table of each account, the trigger code and service codes attached to that account, and the rate for each.
I have been able to dynamically get the pivot, but I'm not joining correctly, as its returning every dynamic column, not just the columns of a trigger code. The code below will return the account and trigger code, but also every service code, regardless of which trigger code they belong to, and just show null values.
What I would like to get is just the service codes and the appropriate trigger code for each account.
SELECT @cols = STUFF((SELECT DISTINCT ',' + ServiceCode
FROM TriggerTable
FOR XML PATH(''), TYPE
).value('(./text())[1]', 'VARCHAR(MAX)')
,1,2,'')
[Code] ....
View 1 Replies
View Related
Mar 11, 2015
How to write a Dynamic Pivot Statement to Calculate and Organize Columns like:
CREATE TABLE #mytable
(
Name varchar(50),
GA int,
GB int,
startdate DATETIME,
enddate DATETIME
[Code] ...
Below is Our Sample Table Data.
Name GAGBstartdateenddate
Pavan 261/1/20151/1/2015
Hema 561/1/20151/1/2015
Surya 501/1/20151/1/2015
Pavan 811/2/20151/8/2015
Hema 311/2/20151/8/2015
Surya 121/2/20151/8/2015
Pavan 1041/9/20151/15/2015
Hema 301/9/20151/15/2015
Surya 6131/9/20151/15/2015
How to write Pivot Satement to get Oupt like below:
1/1/2015 Pavan Hema Surya SumTotal
Total 8 11 5 24
GA 2 5 5 12
GB 6 6 0 12
1/8/2015 Pavan Hema Surya SumTotal
Total 9 4 3 16
GA 8 3 1 12
GB 1 1 2 4
1/15/2015 Pavan Hema Surya SumTotal
Total 14 3 19 36
GA 10 3 6 19
GB 4 0 13 17
View 5 Replies
View Related
Mar 26, 2015
I currently have data stored in a temporary table and I would like to transpose the data into a better format. I would like for the query to be dynamic since one of the tables currently has over 500 columns.
The attached file provides an example of the table structure along with sample data. Below the first set of data is the desired final format.
View 2 Replies
View Related
Aug 15, 2015
I need to pivot my records in columns into rows. Here is sample data:
create table #columnstorows
(
Payervarchar (5),
IDvarchar (5),
ClMvarchar (2),
Paid1float,
[Code] ....
Desired result:
Payer1Payer2ID1ID2Paid1APaid1BPaid2APaid2BPaid3APaid3B
U001 U002 00100276.58 19.53 153.4896.43 53.48 200
View 6 Replies
View Related
Nov 13, 2014
I have 5 columns in my database. 1 column is coming like a dynamic.
I want to convert records from rows to columns. Currently I have a data like this.
Race AgeRange Amount
W 17-20 500
W 21-30 400
W 31-40 200
A 17-20 100
H 41-50 250
H 51-60 290
So age range is not fixed and it can be any and I have one separate relational table for age range where it's coming from. Now I want to convert it into columns like
Race 17-20 21-30 31-40 41-50 51-60
W 500 400 200 0 0
A 100 0 0 0 0
H 0 0 0 250 290
View 1 Replies
View Related
Mar 26, 2014
I have a query
DECLARE @DynamicPivotQuery AS NVARCHAR(MAX)
DECLARE @ColumnName AS NVARCHAR(MAX)
--Get distinct values of the PIVOT Column
SELECT @ColumnName= ISNULL(@ColumnName + ',','')
+ QUOTENAME(name)
[Code] ....
and so on.
I've tried putting my group by everywhere but it's not working. I'm missing something but what?
View 9 Replies
View Related
Jul 2, 2014
I am having trouble figuring out why the following code throws an error:
declare
@cols nvarchar(50),
@stmt nvarchar(max)
select @cols = ('[' + W.FKStoreID + ']') from (select distinct FKStoreID from VW_PC_T) as W
select @stmt = '
select *
[Code] ...
The issue that I am having is:
Msg 245, Level 16, State 1, Line 4
Conversion failed when converting the varchar value '[' to data type int.
I know that I have to use the [ ] in order to run the dynamic sql. I am not sure what is failing and why as the syntax seems to be clean to me (obviously it is not).
View 6 Replies
View Related
May 29, 2015
I have written a script to pivot a table into multiple columns.
The script works when run on its own but gives an error when i try to create a view or aprocedure from the same script. The temporary table #.... does not work so i have converted it to a cte.
Here is a copy of the script below
-- Dynamic PIVOT
IF OBJECT_ID('#External_Referrals') IS NULL
DROP TABLE #External_Referrals;
GO
DECLARE @T AS TABLE(y INT NOT NULL PRIMARY KEY);
[Code] ....
View 7 Replies
View Related
Feb 15, 2008
I have the following Pivot Table:
Code Snippet
Declare @tblEquipment Table
(
numEquipmentID INT,
txtManufacturer nvarchar(30),
txtModel nvarchar(30)
)
Declare @tblEquipmentFields Table
(
numFieldNameID INT,
txtFieldName nvarchar(25)
)
Declare @tblEquipmentDetails Table
(
numEquipmentDetailsID INT,
numEquipmentID INT,
numFieldNameID INT,
txtFieldValue nvarchar(30)
)
Insert INTO @tblEquipment Values(23, 'Dell', 'Optiplex 270')
Insert INTO @tblEquipment Values(26, 'Dell', '1705FP')
Insert INTO @tblEquipment Values(42, 'Dell', 'Optiples 745')
Insert INTO @tblEquipmentFields Values(1, 'Monitor Size')
Insert INTO @tblEquipmentFields Values(2, 'Processor Type')
Insert INTO @tblEquipmentDetails Values(1077, 23, 2, 'P4M')
Insert INTO @tblEquipmentDetails Values(1146, 26, 1, '17')
Insert INTO @tblEquipmentDetails Values(1026, 42, 2, 'P4 Dual Core')
Select numEquipmentID As EquipmentID, [Monitor Size], [Processor Type]
From
(Select a.numEquipmentID, txtManufacturer, txtModel, txtFieldName, txtFieldValue
From @tblEquipment a JOIN
@tblEquipmentDetails b ON
a.numEquipmentID = b.numEquipmentID
JOIN @tblEquipmentFields c ON
b.numFieldNameID = c.numFieldNameID
) As SourceTable
Pivot
(
Max(txtFieldValue)
For txtFieldName IN ([Monitor Size], [Processor Type])
) As PivotTable
What I'm wondering is if it's possible to have the columns change dynamically. For example:
If lets say I only want the record with numEquipmentID of 23 to show I only want its corresponding information to show
EquipmentID ProcessorType
23 P4M
Now lets say that I want to bring back an additional record, like 23 and 26 I would like the columns to change to the following
EquipmentID ProcessorType Monitor Size
23 P4M NULL
26 NULL 17
So in essence a column will be added based on the equipmentID. Thanks in advanced.
View 4 Replies
View Related
May 12, 2015
The first select is running fine but due to extra values added to the table the list of manual difined columns must be added manualy each time new values occur.
Is it possible to make the PIVOT's IN clause dynamicly as stated in the second script (it is based on the same table #source) when running it prompts the next error;
Msg 156, Level 15, State 1, Line 315
Incorrect syntax near the keyword 'select'.
Msg 102, Level 15, State 1, Line 315
Incorrect syntax near ')'.
adding or moving ')' or '(' are not working.......
select *
into #temp
from #source
pivot ( avg(value) for drive in ([C], [D], [E], [F], [G], [H], [T], [U], [V] )) as value
select * from #temp order by .........
versus
select *
into #temp
from #source
pivot ( avg(value) for drive in (select distinct(column) from #source)) as value
select * from #temp order by .....
View 3 Replies
View Related
Jun 15, 2015
I have attached SQL File which Gives me the below resultset Excel.xlsx
But the problem is i am not able to round off the dynamic columns in side my PIVOT, how to rewrite the dynamic query.
View 4 Replies
View Related
Sep 21, 2015
Can we pass dynamic values while pivoting?
Here is example
Declare @a date, @b date
set @a='2015-09-08 22:19:29.330'
set @b='2015-09-17 22:19:29.330'
create table #DateTemp(Full_Date_Text_YYYY_MM_DD datetime,Full_Date date)
insert into #DateTemp(Full_Date_Text_YYYY_MM_DD,Full_Date)
select '2015-09-09 00:00:00.000','2015-09-09'
[Code] ......
View 3 Replies
View Related
Mar 7, 2008
i want to convert the rows of one table to be the column of another table in run time......i have two tables one having student id and name and in another table there are student id, marks and subject as english. hindi and maths in rows...i want to make another a third table which contains student id , name , marks as english, hindi, maths as the column....tried a lot but didnt get the right way...do we have to do it through Join or is there some other technique by which we can solve the query........i dont know wheather i am really informative or not..but am sitting online if incase you wanna know something else even..........
View 4 Replies
View Related
Nov 25, 2013
I am trying to pivot some data as you would normally however I am trying to also group the pivot into three sub column groups too.
Basically the scenario is that I have three sub groups Budget, Person, RenewalDate for each Service (Service being the pivot point). So for each unique service I want to display the budget person and renewal date for each service by company.
I have created two tables to illustrate the base data and the required output.
How to do this dynamically because the number of Services is unknown, i.e. it could be 4 Services or 20, each with three sub columns, budget, person and renewal date.
Please find code below. It should be quite self explanatory as to what I am trying to do.
IMPORTANT:
1. I really need it to be dynamic
2. the Services are not standardised names, they are numbered for illustration purposes only, they vary in naming convention.
create table #BaseData
(
Company nvarchar(100),
Person nvarchar(50),
[Service] nvarchar(100),
Budget int,
RenewalDate datetime
)
[Code] .....
View 4 Replies
View Related
Aug 27, 2015
i have following table columns and i want to convert these all columns into row
SELECT [CASHINHAND]
,[CASHATBANK]
,[DEPOSITS]
,[ACCRECEVABLE]
,[SUNDRYDEBTORS]
,[LOANANDADVANCES]
[Code] ....
required output looks like
CASHINHAND 118950
CASHATBANK 200
DEPOSITS 3000
ACCRECEIVABLE
25000
View 3 Replies
View Related
Dec 11, 2013
I have two dynamic pivot tables that I need to join. The problem I'm running into is that at execution, one is ~7500 characters and the other is ~7000 characters.
I can't set them both up as CTEs and query, the statement gets truncated.
I can't use a temp table because those get dropped when the query finishes.
I can't use a real table because the insert statement gets truncated.
Do I have any other good options, or am I in Spacklesville?
View 7 Replies
View Related
Mar 9, 2015
I have tried building an Inline TVF, as I assume this is how it would be used on the DB; however, I am receiving the following error on my code, I must be missing a step somewhere, as I've never done this before. I'm lost on how to implement this clr function on my db?
Error:
Msg 156, Level 15, State 1, Procedure clrDynamicPivot, Line 18
Incorrect syntax near the keyword 'external'.
CREATE FUNCTION clrDynamicPivot
(
-- Add the parameters for the function here
@query nvarchar(4000),
@pivotColumn nvarchar(4000),
[code]....
View 1 Replies
View Related
May 16, 2007
Hi,
I have the following data in a table called "Products" :
Product Qty LHinging RHinging
-------- ----- -------- --------
Panel_1 1 R
Panel_1 1 L
Panel_1 1 R
Panel_1 1 R
Panel_2 1
Panel_2 1 L
I need to group this data like this :
Product Qty LHinging RHinging
-------- ----- -------- --------
Panel_1 3 L R
Panel_2 1
Panel_2 1 L
How can I do that ???
Thanks !
View 3 Replies
View Related
Dec 18, 2014
I need to convert the column to rows but within group. example
Group Name Value
p a 1
p b 2
p c 3
p d 4
q a 5
q b 6
q d 7
r a 8
r b 9
r c 10
r d 11
This need to be transposed to :
Group a b c d
p1234
q56NULL7
r891011
View 3 Replies
View Related
Sep 10, 2015
I have a single table that consist of 4 columns. Entity, ParamName, ParamsValue and ParamiValue. This table stores normalized Late Fee related parameters for apartments. The Entity field contains a code that identifies the apartment complex. The ParamName in a textual field that contains the name of the parameter that the other 2 fields define the value for; ParamsValue and ParamiValue. If the Late Fee parameter (as named in ParamName is something numerical then the value for that parameter can be found in ParamiValue else its in ParamsValue.
I don't know if 'Pivot' is the correct term to use for describing what I am trying to do because I've looked at the Pivot examples and I don't see how that will work for this. Using the Table and data as provided below, how would I construct a query so that I get 1 row per Entity in which the columns are the ParamsValue or ParamiValue for the ParamName listed in the column header (for the query)?
Below is the DDL to create the table and populate it.
USE [DBA_UTIL]
CREATE TABLE [dbo].[PARAMEXAMPLE](
[Entity] [varchar](16) NULL,
[Code]....
View 4 Replies
View Related
May 11, 2006
I have a table with 40k terms and I need to map these to a set of objects where each object is represented as a column(tinyint). The object/column name is represented as a guid and columns are added/removed dynamically to support new objects for a set of terms.
I can get the rows needed:
guid1guid2guid3guid4guid5
================================
01100
01101
I think I need to then convert this set of rows to a table which I can join to the object runtime table to start these objects if the column has a count/sum greater than 0. This is the table I think I need in order to join on guids to the runtime table:
NAME Count
===========
guid10
guid22
guid32
guid40
guid51
I don't know how to construct this table for the former table. I think it may be a pivot table, but I don't know. I have the column names:
SELECT NAME
FROM SYSCOLUMNS
WHERE ID = OBJECT_ID(#Temp)
ORDER BY COLID
NAME is a sysname, which doesn't seem to cast into a guid, also a problem when joining the runtime table with this #Temp table.
I also don't want to use a cursor to construct a table.
Thanks for any help,
James
View 1 Replies
View Related
Feb 13, 2015
I am working on to convert my static Store procedure to Dynamic.
I have created a Store procedure with Merge statement which is inserting new record and updating existing record.
This SP I will use in SSIS Insted of Data Flow Task I will run in Execute SQL Task.
Now my biggest problem is I dont know how to convert static code toi dynamic
Below is my Store procedure code.
As you can see my Source Query
I have a filemaster table as shown below which consist of Input filename,Source table ,Destination table and BBX expression.
Input_FilenameSourceTableName DestinationTableName BBxKeyDerExpr
CCTFB ImportBBxCctfb ArchiveBBxCctfb SUBSTRING(Col001,1,6)
CEMXR ImportBBxCemxr ArchiveBBxCemxr SUBSTRING(Col001,1,10)
In my source query I want to change the value of Source table ,Destination table and BBX expression dynamically on the basis of input file.
Purpose of making dynamic is that I have created separate sp for all the input, my clients want to have sungle dynamic sp which will execute on the basis of input file.this input file name I wil get fromm variable which i have created in SSIS Package.
Lets consider @File_name is the variable in package which store the file name
if file name is CCTFB then my query should take the Source table ,Destination table and BBX expression value from file master table.
Like that I have 100 of source query and evry query have diffrent number of columns. How can I change the column number in uodate and insert statement dynamically on run time.
CAST(SUBSTRING(Col001,1,6) + SUBSTRING(Col002,1,10) AS varchar(100)) :-It creates a key for comparing, this value i can take it from filemaster
HASHBYTES('MD5', CAST(CHECKSUM(Col001, Col002,Col003,Col004) AS varchar(max))) -here numberv of column need to be changed .
(SUBSTRING(SOURCE.Col001,1,6) + SUBSTRING(SOURCE.Col002,1,10)) this condition also i can take it from file master.
[Code] ....
I am able to get inserted and updated rowcount, but not able to get the matching records count.
View 0 Replies
View Related
Aug 3, 2007
I am trying to do a PIVOT on a query result, but the column names created by the PIVOT function are dynamic.
For example (modified from the SQL Server 2005 Books Online documentation on the PIVOT operator) :
SELECT
Division,
[2] AS CurrentPeriod,
[1] AS PreviousPeriod
FROM
(
SELECT
Period,
Division,
Sales_Amount
FROM
Sales.SalesOrderHeader
WHERE
(
Period = @period
OR Period = @period - 1
)
) p
PIVOT
(
SUM (Sales_Amount)
FOR Period IN ( [2], [1] )
) AS pvt
Let's assume that any value 2 is selected for the @period parameter, and returns the sales by division for periods 2 and 1 (2 minus 1).
Division CurrentPeriod PreviousPeriodA 400 3000 B 400 100 C 470 300 D 800 2500 E 1000 1900
What if the value @period were to be changed, to say period 4 and it should returns the sales for periods 4 and 3 for example, is there a way I can change to code above to still perform the PIVOT while dynamically accepting the period values 4 and 3, applying it to the columns names in the first SELECT statement and the FOR ... IN clause in the PIVOT statement ?
Need a way to represent the following [2] and [1] column names dynamically depending on the value in the @period parameter.
[2] AS CurrentPeriod,
[1] AS PreviousPeriod
FOR Period IN ( [2], [1] )
I have tried to use the @period but it doesn't work.
Thanks in advance.
Kenny
View 1 Replies
View Related
Apr 23, 2015
I found this Microsoft article for creating crosstab-like queries in SSMS.Is it possible, however, to create this same query if I do not know what the values for the columns will be? Using their example for my problem, I will not know what the values in the "IN" criteria will be because my query would be for a "rolling" 12 months (thus causing that IN criteria to change every month).I've tried declaring variables to pull in the values, but since this will eventually go into a view, I don't think that I can use declared variables.
View 3 Replies
View Related
Oct 13, 2015
Can I force the following measure to be visible for all rows in a pivot table?
Sales Special Visibility:=IF(
HASONEVALUE(dimSalesCompanies[SalesCompany])
;IF(
VALUES(dimSalesCompanies[SalesCompany]) = "Sales"
;CALCULATE([Sales];ALL(dimSalesCompanies[SalesCompany]))
;[Sales]
)
;BLANK()
)
FYI, I also have other measures as well in the pivot table that I don't want to affect.
View 3 Replies
View Related
Jan 13, 2008
Hi,
I have a client with the following table structure:
ItemNumber, Name, Description
containing the following Data (example):
ItemNumber
Name
Value
6473764
SDRAM
4GB
6473764
Xeon
2300 Mhz
6473764
Video
256 MB
6473764
Bus
1300 Mhz
6473759
SDRAM
2GB
6473759
Xeon
2000 Mhz
6473759
Video
128 MB
6473759
Bus
1066 Mhz
I am trying to use PIVOT to convert this into Columns:
Item Number
SDRAM
Xeon
Video
Bus
6473764
4GB
2300 Mhz
256 MB
1300 Mhz
6473759
2 GB
2000 Mhz
128 MB
1066 Mhz
The problem is that I do not know the names of the columns before I run the query. I retrieve them based on a a list of Item Numbers:
SELECT DISTINCT Name FROM TableName WHERE ItemNumber IN (...)
What I was trying to do is the following, but I am not exactly sure what is wrong:
WITH ProductLines (ItemNumber, ItemName, ItemValue)
AS
(
SELECT ItemNumber, Name, Value FROM ProductItems WHERE ItemNumber IN (...)
)
SELECT * FROM ProductLines -- Don't know the column names
PIVOT
(
... -- Not sure what should come here
FOR ItemNumber IN (...)
)
Thanks a lot,
Aric Levin
View 3 Replies
View Related
Jun 2, 2014
I am running sqlserver 2012.
My output data is like
COL1
aaa
bbb
ccc
Now, i want to convert the output to
aaa;bbb;ccc
How can i do this?
View 2 Replies
View Related
Nov 11, 2014
I have an excel file which has dynamic columns
i.e. Col1, Col2, Col3 this week. next week i will have a new Col4 in the sheet. This will keep on adding every week.
My problem is to Unpivot the data
Date 8/2/2013 8/9/2013 8/16/2013
Stock 1,561 1,661 1,761
i.e. the abobe table should become as
Date Stock
8/2/2013 1561
8/9/2013 1661
8/16/2013 1,761
How can I unpivot the dynamic columns given that the columns will keep on increasing every week.
View 1 Replies
View Related
Jul 10, 2006
Hi everybody.
I have this table that contains how many items were sold (and their value) into two departments:
SellerID(PK)
Year(PK)
ItemsSoldDPT1
ItemsSoldDPT2
ValueSoldDPT1
ValueSoldDPT2
1
2002
10
20
300.00
400.00
1
2003
13
71
450.00
320.00
1
2004
8
4
350.00
640.00
1
2005
2
15
110.00
680.00
2
2001
3
1
130.00
100.00
2
2005
1
7
190.00
200.00
2
2006
6
9
170.00
500.00
...
...
...
...
...
...
I'm trying to write a query that puts the data present in the "Year" column as if they were in a row (column definitions)..making sums of pieces and values.. or.. to be more clear..
I want to obtain this:
SellerID
2001 Items
2001 Values
2002 Items
2002 Values
2003 Items
2003 Values
2004 Items
2004 Values
2005 Items
2005 Values
2006 Items
2006 Values
...
1
(NULL)
(NULL)
30
700.00
84
770.00
12
990.00
17
790.00
(NULL)
(NULL)
...
2
4
230.00
(NULL)
(NULL)
(NULL)
(NULL)
(NULL)
(NULL)
8
390.00
15
670.00
...
...
...
..
...
...
...
...
...
...
...
...
...
...
...
Any ideas? I think I should use the PIVOT keyword to write the sql but I can't figure how it works and how can I do that sums.
Please note: I don't know how many distinct values of "Year" exists and the min and max year can be specified by the user.
Thank you for your help.
View 5 Replies
View Related
Aug 28, 2014
I would like to reach out in converting rows to cols.
Format:
NodeName|upsBasicIdentName|upsBasicIdentModel | upsAdvIdentSerialNumber | upsAdvIdentDateOfManufacture | upsBasicBatteryLastReplaceDate
I have this query. the values of each are under status.
SELECT
Nodes.Caption AS NodeName, CustomNodePollers_CustomPollers.MIB AS MIB, CustomNodePollerStatus_CustomPollerStatus.Status AS Status
FROM
((Nodes INNER JOIN CustomPollerAssignment CustomNodePollerAssignment_CustomPollerAssignment ON
[Code] ....
View 3 Replies
View Related
Aug 15, 2015
I need to pivot my records in columns into rows. Here is sample data:
create table #columnstorows
(
Payer varchar (5),
ID varchar (5),
ClM varchar (2),
Paid1 float,
Paid2 float,
Paid3 float
)
[code]....
Desired result:
Payer1 Payer2
ID1 ID2
Paid1A Paid1B
Paid2A Paid2B
Paid3A Paid3B
U001 U002
001 002
76.58 19.53
153.48 96.43
53.48 200
View 10 Replies
View Related
