SQL Server 2012 :: Creating Buckets For Sales Data
Jul 11, 2015
Recently I've been stumbling with a way to properly produce a result that provides me a count of sales orders that fall in a range of sales order totals.
I want to take the Sales Order Total and then count how many times it falls into a specific bucket.
I've included the script where I've left with sample data so you can run in into a tempdb.
I hope to have the end result look like the below summary if you use my sample data.
Count Less Than 5K: 5
Count Greater Than 5K Less Than 10K: 0
Count Greater Than 10K Less Than 25K: 3
Count Greater Than 25K: 2
Here is the script to set up the tempdb
use tempdb
go
/*
drop table #salesinvoice;
drop table #salesinvoicedetail;
[Code] ....
Below is my query, I change it to perform a count on the summarized totals.
select
si.OrderID as OrderNum
,sum(case when sid.LineAmount < 5000 then 1 else 0 end) as LT5K
,sum(case when sid.LineAmount >=5000 and sid.LineAmount < 10000 then 1 else 0 end) as GT5kLT10k
,sum(case when sid.LineAmount >=10000 and sid.LineAmount < 25000 then 1 else 0 end) as GT10kLT25k
How do I find sales trend of an employee via comparing current month and previous month sales?
I got so far query upto following,
;WITH SalesOrderHeader As ( SELECT ROW_NUMBER() OVER (ORDER BY SUM(H.SUBTOTAL)) AS ROWNUMBER, SUM(H.SUBTOTAL),H.SALESPERSONID,
[Code]....
I am getting following error: The ORDER BY clause is invalid in views, inline functions, derived tables, subqueries, and common table expressions, unless TOP, OFFSET or FOR XML is also specified.
I need to list customers in a table that represents sales over the years.
I have tables:
Customers -> id | name |... Orders -> id | idCustomer | date | ... Products -> id | idOrder | unitprice | quantity | ...
I am using this SQL but it only gets one year:
SELECT customers.name , SUM(unitprice*qt) AS total FROM Products INNER JOIN Orders ON Orders.id = Products.idOrder INNER JOIN Customers ON Customers.id = Orders.idCustomer WHERE year(date)=2014 GROUP BY customers.name ORDER BY 2 DESC
I need something like this:
customer | total sales 204 | total sales | 2015 | total sales (2014 + 2015) -------- customer A | 1000$ | 2000$ | 3000$ customer B | 100$ | 100$ | 200$
Is it possible to retrieve these values in a single SQL query for multiple years and grand total?
i am trying to find a way to link an 'initial' Sale ID of a product to 'future' Sale IDs of products that will trace back to the original Sale ID.For example, if I call the original sale , 'Sale ID #123', how can i link future Sale ID's (child[ren]) and all future sales to the original Sale ID #123? Can I use a Surrogate Key or similar function?
Parent:Sale ID #123 Children:Â Sale ID # 456, Sale ID #789, Sale ID #.....
how I can link the original Sales ID (Parent) to Sale ID's (child[ren]) of future purchases currently existing and in the future going forward?
Hi, I've been through Books Online, Technet, MSN and the archives on this site trying to get a difinite answer on this. Everything except Technet indicates a maximum configurable value of 265003. However in Technet, it says that if you are running the enterprise edition with more than 2GB of memory that you can configure this to a much higher number (their example is 700000). Using the calculation involving memory, and based on several dozen performance tests, we would like to set our value to around 666000 (using the prime number of course). However we cannot get SQL to accept any value over the default maximum.
Is Technet wrong? Are we missing something? I cant find any reference other than in Technet on being able to use the higher number.
I want to calculate the sum of actual sales until a date and forecast sales after a date.I am not sure what the best approach to this problem is, but I have tried my best with the following approach. Any better ways to solve this (using DAX).
I have created a parameter table that offers the last date of each month as possible choices to the user. I have tried to create a measure that sums actual sales up until this date.
I need to ensure some naming standards to users while creating tables.
All table name should be in same pattern
(ie., ) TeamName_EmpId_tablename
I need a way to restrict user to follow the naming standard. If any user tries to create table without the above naming standard system should not allow.
Discuss the following sql query with respect to performance in an applicaiton involving more number of concurrent users creating and deleting records. The objective is to create continuous primary key integer values.
Table name: SitePage
Column DataType --------- -----------
PageID BigINT PageName nchar(10)
Query to insert new record
DECLARE @intFlag INT SET @intFlag = 0 WHILE (@intFlag =0) BEGIN BEGIN TRY
[Code] ....
We don't want to use auto increment integer value for primary key because of the following reason
[URL] .....
We also don't want to use SEQUENCE as we have to create 50 sequence for 50 tables
I am having trouble figuring out why the following code throws an error:
declare @cols nvarchar(50), @stmt nvarchar(max) select @cols = ('[' + W.FKStoreID + ']') from (select distinct FKStoreID from VW_PC_T) as W select @stmt = ' select *
[Code] ...
The issue that I am having is:
Msg 245, Level 16, State 1, Line 4 Conversion failed when converting the varchar value '[' to data type int.
I know that I have to use the [ ] in order to run the dynamic sql. I am not sure what is failing and why as the syntax seems to be clean to me (obviously it is not).
I have the following query that will serve as a basis for SSRS report
SELECT TOP (1000) d.Project_Name, d.Status, d.Country, d.Region, p.Period, p.Quarter, p.Year, d.Brand, d.Store_Opens_Actual, d.DA, d.DPN, d.StoreNumber, CONVERT(VARCHAR(10), CASE WHEN ISDATE(d .Store_Opens_Actual) = 1 THEN d .Store_Opens_Actual WHEN ISDATE(d .Store_Opens_Forecast) = 1 AND ISDATE(d .Store_Opens_Actual) = 0 THEN d .Store_Opens_Forecast WHEN ISDATE(d
[Code] ....
This returns a dataset, that I need to convert into a PIVOT table that should look like the attached spreadsheet.
Having trouble writing the PIVOT table query. I feel like I am missing something conceptually as I am not doing any summing or aggregation. I don't know if dynamics SQL is the solution here or which route to take. I don't know if there is such things as PIVOTING without aggregation. CROSS TAB came to my mind as well.
I want to create and drop the global temporary table in same statement.
I am using below command but I am getting below error
Msg 2714, Level 16, State 6, Line 11
There is already an object named '##Staging_Temp' in the database.
if object_id('Datastaging..##Staging_Temp') is not null begin drop table ##Staging_Temp end CREATE TABLE ##Staging_Temp( [COL001] [varchar](4000) NULL,
I am getting error when I am trying to create table on runtime
Declare @FileName varchar(100) Declare @File varchar(100) set @FileName='brkrte_121227102828' SET @File = SUBSTRING(@FileName,1,CHARINDEX('_',@FileName)-1) --=select @File
[Code] ....
Error massage:- Msg 203, Level 16, State 2, Line 16
The name 'CREATE TABLE DataStaging.dbo.Staging_brkrte ( [COL001] VARCHAR (4000) NOT NULL, [Id] Int Identity(1,1), [LoadDate] datetime default getdate() )' is not a valid identifier.
What I'm looking to do is very much the image below. I need to bucket the DOS. I cannot do a calculation in a column because the DOS needs to recalculate based on filter changes or how graphs are setup. My DOS is a calculated field. When I try to create a calculated field to create the buckets I can't use it in a pivot table or powerview.
I could deploy across my environment, which is a mix of 2008R2/2012 servers, to give some information on log files. Running into a silly issue right off the bat. The table that DBCC LogInfo() conjures out of magic is different between the two. In 2012 it gained the RecoveryUnitID column. So I'm trying to write some logic to create a temp table based on which version is running. I would like to avoid a global temp table if possible. Here's what I've tried:
sp_executesql creates a table outside of the scope of my session: DECLARE @PrVers NVARCHAR(128) , @PrVersNum DECIMAL(10,2) , @StageTable NVARCHAR(1024) = N''
I have written a script to pivot a table into multiple columns.
The script works when run on its own but gives an error when i try to create a view or aprocedure from the same script. The temporary table #.... does not work so i have converted it to a cte.
Here is a copy of the script below
-- Dynamic PIVOT IF OBJECT_ID('#External_Referrals') IS NULL DROP TABLE #External_Referrals; GO DECLARE @T AS TABLE(y INT NOT NULL PRIMARY KEY);
I have a table of orders. I was asked to count the orders that fall into specific dollar buckets. Normally I would use a CASE statement for this, but in this case, there are over 100 different buckets!
For example, I need to count the orders in $5 increments up to $400. The CASE statement would look like this:
Code: CASE WHEN sum(revenue) BETWEEN 0.01 AND 5.00 THEN [0.01 to 5.00] WHEN sum(revenue) BETWEEN 5.01 AND 10.00 THEN [5.01 to 10.00] ... WHEN sum(revenue) BETWEEN 395.01 AND 400.00 THEN [395.01 to 400.00]
Is there an easier way to do this, maybe with a loop?
I am creating a query that shows the consumption of stock against Manf Orders (M/O) and struggling on the last hurdle. I am having difficulties calculating a running total based on an Opening Balance. The first line returns the correct results but the following lines do not. I have tried other variants of the "Over Partition" but still no joy?
SELECT CASE WHEN ROWNUMBER > 1 THEN '' ELSE A.Component END AS Component , CASE WHEN ROWNUMBER > 1 THEN '' ELSE A.SKU
I'm trying to develop a query that provides sales data by Customer.GroupCode in monthly columns as depicted below:
GrpCd JAN FEB MAR APR MAY JUN JUL AUG SEP OCT NOV DEC TOT Film 5,000 15,000 20,000 Aero Elct 3,000 950 3,950 Desg Edu 150 150
Here€™s a simplified version of the DDL: CREATE TABLE invchead ( invoicenum int NULL , invoicedate datetime NULL , invoiceamt decimal(16, 2) NULL , custnum int NULL )
The query below gets me close but it gives me gives me one row for each customer. So if I have 5 customers with the same group code, I get 5 rows for that group code. I need to modify it or come up with a different approach that gives me only one row for each GroupCode.
SELECT distinct c.Name, c.GroupCode, (SELECT SUM(InvoiceAmt) FROM InvcHead WHERE InvcHead.custnum=i.custnum AND DATEPART(year, InvcHead.invoicedate)= DATEPART(year, i.invoicedate) AND DATEPART(month, InvcHead.invoicedate)=1) JAN, (SELECT SUM(InvoiceAmt) FROM InvcHead WHERE InvcHead.custnum=i.custnum AND DATEPART(year, InvcHead.invoicedate)= DATEPART(year, i.invoicedate) AND DATEPART(month, InvcHead.invoicedate)=2) FEB, ...... (SELECT SUM(InvoiceAmt) FROM InvcHead WHERE InvcHead.custnum=i.custnum AND DATEPART(year, InvcHead.invoicedate)= DATEPART(year, i.invoicedate)) TOT
FROM InvcHead i INNER JOIN Customer c ON (i.custnum=c.custnum) WHERE i.invoicedate>='1-1-2007' AND i.invoicedate<'1-1-2008'
Grateful for any advice that will get me closer to accomplishing this.
I have a form with a drop down box so the user can select a quote.. When a quote is selected i need to populate a table of all the records associated with the quote id. I need the table to be created in such a way that the user can add new rows, delete rows and edit the data. Then all of the changes need to be written back to the database. Whats the most efficient/best way of doing this and if you have any ideas can you explain them as thoroughly as possible! I'm currently upgrading an access database to a sql server back end with an asp.net client and it's taking me a while to get to grips with all the changes!Thanks in advance,Chris
My question is what is the proper way to do this? I have been try the ways that it is instructing me to do.
By creating the name, then I go to a list of potential sources, one being: the local, then another being: the actual domain on the network, last one being: the name of the created data source. I have already tried the local & domain, I will try the last one.
But, my question is if this selection is not going to connect to SQL SERVER. Then, "What should I do within the server to make this connection possible to a client computer look for the access?"
I think I am definitely thrashing and am not getting anywhere on something I think should be pretty simple to accomplish: I need to pull the total amounts for compartments with different products which are under the same manifest and the same document number conditionally based on if the document types are "Starting" or "Ending" but the values come from the "Adjust" records.
So here is the DDL, sample data, and the ideal return rows
CREATE TABLE #InvLogData ( Id BIGINT, --is actually an identity column Manifest_Id BIGINT, Doc_Num BIGINT, Doc_Type CHAR(1), -- S = Starting, E = Ending, A = Adjust Compart_Id TINYINT,
[Code] ....
I have tried a combination of the below statements but I keep coming back to not being able to actually grab the correct rows.
SELECT DISTINCT(column X) FROM #InvLogData GROUP BY X HAVING COUNT(DISTINCT X) > 1
One further minor problem: I need to make this a set-based solution. This table grows by a couple hundred thousand rows a week, a co-worker suggested using a <shudder/> cursor to do the work but it would never be performant.
I have an invoice table with customer, date, sales location, and invoice total. I want to total the invoices by location by customer and see what location sells the most to each customer. My table looks like this.
we have some reference tables in in a specific database. that other applications need to have access to them. Is it possible to create a view in the application's database to retrive data from ref database while users just have access to the application Database not the view's underlying tables?
Hopefully there's an easy answer for this. I'm totally new to SQL server and I'm trying to upsize an Access database. Whether I use the upsizing wizard or try to create a data source through the ODBC Data Source Administrator, I get a connection failed error. It tells me the server does not exist or my login is incorrect. I'm using NT authentication to connect to the server on my local drive. I just installed the whole 2005 express edition and the only thing that came up during the install was that I didn't have IIS installed. I didn't see how that would be relevant, so I went ahead with the install.
Shouldn't this work with the default setup? I've searched around trying different "solutions" although I doubt they were specifically related to this very basic problem. I tried giving my login every right I could find through in the database engine properties in the server management studio, which connects fine itself with just my network login name and no password. What am I missing?
I want to write a query where I can see all races and age range as column.
TblRace
ID, RaceName
TblAgeRange
ID,AgeRange.
There is no connection between this two table. I need to display result like below.
Race 17-20 21-30 31-40
A
B
I
W
How do i get this kind of empty data set so that I can fill it out in front end or any better solution. The age range will be displayed as many row as they have. It's not static. Above is just an example.
