Write the query that produces the below results. I'm not ale to join the two sets in a way so that it displays NULLs if no purchase was made on a given day for a particular product. I need NULLs or s so that it shows up correctly on my SSRS report.
;with testdata as(
SELECT 1 AS Id,'1/6/2014' AS Date, 21 As Amount UNION ALL
SELECT 1 ,'1/8/2014', 25 UNION ALL
SELECT 1 ,'1/9/2014', 30 UNION ALL
SELECT 1 ,'1/10/2014', 60 UNION ALL
SELECT 1 ,'1/5/2015', 3800 UNION ALL
SELECT 1 ,'1/6/2015', 7120 UNION ALL
Create Table Sample (ID int not null primary key, RefID int , SeqNo int , Name varchar(10) )
insert into Sample
select 1, 1000, 1, 'Mike' union select 2, 1000, 2, 'Mikey' union select 3, 1000, 3, 'Michel' union select 4, 1001, 1, 'Carmel' union
[code]....
select * from SampleI have here sample data given. What I want to do is, I want to check the RefID which is not having proper order of sequence number. If you see the RefID 1000, 1001 they are having properly sequence order in SeqNo field. But it is not in RefID 1002. RefID 1002 does not have proper order. It is because user has deleted a row which was having seqno 2. So i want to get what are all the RefID's are not having properly sequenced. So that I would be able to know these are all the RefID's are affected by delete statement that was done by user.
I have a table that stores Terminal ID, Product Name, Cost and Effective Date. I need to generate query that will produce record set with start effective date and end date based on terminal and product. Table has over million records. In example below you could see table structure/data and desired outcome.
SELECT fmc_terminal, fmc_date = CAST(d. fmc_date AS DATETIME) ,d.fmc_prodlnk, d. fmc_cost INTO #TestTable FROM ( SELECT 1, '2014-12-03 00:04:00.000','A', 2.25 UNION ALL
I've started using a SEQUENCE in a table instead of an identity.
I seem to be experiencing problems of the sequence getting reset to a lower value periodically. Inserting will work on the table, producing the next bigint in the sequence as the primary key, for days and then all of the sudden duplicate primary key errors show up. When I check, the last primary key value in the table is higher than the current value of the sequence.
For example: right now I have primary key values 6000 through 7032 contiguously in the table, all of which were generated with the sequence. Suddenly I'm getting duplicate primary key errors. A quick check of the sequence shows it's at 7002, but the last inserted row has a primary key of 7032!
I'm populating this table in one place (in the application layer), leaving the primary key null, which allows the default constraint to get the next sequence.
When the problem shows up, I've reset the sequence to the higher number in the past and all is well for many days, then the problem occurs again.
The definition for the sequence is:
CREATE SEQUENCE [dbo].[IntegrationQueueSEQ] AS [bigint] START WITH 1 INCREMENT BY 1 MINVALUE 0 MAXVALUE 9223372036854775807 CYCLE CACHE 50
The default constraint for the primary key on the table is defined as:
ALTER TABLE [dbo].[IntegrationQueue] ADD CONSTRAINT [DF_IntegrationQueue_IntegrationQueueID] DEFAULT (NEXT VALUE FOR [dbo].[IntegrationQueueSEQ]) FOR [IntegrationQueueID]
I need to be able to identify breaks in a sequence so I can evaluate the data more correctly. In the sample I have given I need to be able to identify the break in sequence at 69397576, ideally I would set that as a D. My query also needs to recognize that the 3 sequences following 69397576 are sequential and would belong to that set. so the out come would look like this.
We are running SQL Server 2012 on Windows Server 2008. Just wondering what type of actions would break the backup-chain or backup sequence? For instance, if you have tlog backups being taken every 10 minutes and you stop the SQL Server Service for say 30 minutes. Would this action break the backup chain? Or would everything return to normal once the SQL Server Service is restarted?
I have a Contact table where I enter a "Parent" (Mother or Father) with IsSubscriber = 1. I also enter all of their children in this same table, with IsDependent = 1.
I then have a Relationship table that relates each child to the appropriate parent record in the Contact table.
I need to assign a sequence number to each child ONLY if they were a multiple birth (twins, triplets, etc.; all have the same DOB). I've been successful at writing a query using ROW_NUMBER(), but it includes the single births (no other child of the same parent has the same DOB).
Stripped down version of Tables and Data and my failed attempt to write a query to do what I want:
IF OBJECT_ID('TempDB..#Contact','U') IS NOT NULL DROP TABLE #Contact CREATE TABLE #Contact ( ContactId INT IDENTITY(1,1) PRIMARY KEY CLUSTERED , IsSubscriber BIT
In a t-sql 2012 sql update script listed below, it only works for a few records since the value of TST.dbo.LockCombination.seq only contains the value of 1 in most cases. Basically for every join listed below, there should be 5 records where each record has a distinct seq value of 1, 2, 3, 4, and 5. Thus my goal is to determine how to add the missing rows to the TST.dbo.LockCombination where there are no rows for seq values of between 2 to 5. I would like to know how to insert the missing rows and then do the following update statement. Thus can you show me the sql on how to add the rows for at least one of the missing sequence numbers?
UPDATE LKC SET LKC.combo = lockCombo2 FROM [LockerPopulation] A JOIN TST.dbo.School SCH ON A.schoolnumber = SCH.type JOIN TST.dbo.Locker LKR ON SCH.schoolID = LKR.schoolID AND A.lockerNumber = LKR.number
I need to replace all the "User Friendly Names" with "System Names" in the calculations, i.e., I need "Sales Units" to be replaced with "cSalesUnits", "AUR" replaced with "cAUR", "Comp Sales Units" with "cCompSalesUnits", and "Comp AUR" with "cCompAUR". (It isn't always as easy as removing spaces and added 'c' to the beginning of the string...)
I have created a CTE of all the "Look-up" values, and have tried all kinds of joins, and other functions to achieve this, but so far nothing has quite worked.
How can I accomplish this?
Here is some SQL for set up. There are over 500 formulas that need updating with over 400 different "look up" possibilities, so hard coding something isn't really an option.
Today I have a very similar situation, only today I am dealing with missing text data, not numeric data.
DECLARE @MissingTextData TABLE ( RowID int ,UserID int , EmailAddress varchar(20) ,StreetAddress varchar(20)
[code]...
I would like to fill in the NULL columns with data from the other row, and then select the one row that is filled with all data. I was able to use MAX() for a numeric value, but I am really stumped on the text data. Everything that I have tried is not working.
I am trying to get a count by product, month, year even if there are is no record for that particular month.
Current outcome: Product Month Year Count XYZ January 2014 20 XYZ February 2014 14 XYZ April 2014 34 ...
Desired outcome: Product Month Year Count XYZ January 2014 20 XYZ February 2014 14 XYZ March 2014 0 XYZ April 2014 34 ...
The join statement is simple: Select Product, Month, Year, Count(*) As Count From dbo.Products Group By Product, Month, Year
I have also tried the following code and left joining it with my main query but the product is left out as is seen:
DECLARE @Start DATETIME, @End DATETIME; SELECT @StartDate = '20140101', @EndDate = '20141231'; WITH dt(dt) AS ( SELECT DATEADD(MONTH, n, DATEADD(MONTH, DATEDIFF(MONTH, 0, @Start), 0)) FROM ( SELECT TOP (DATEDIFF(MONTH, @Start, @End) + 1) n = ROW_NUMBER() OVER (ORDER BY [object_id]) - 1 FROM sys.all_objects ORDER BY [object_id] ) AS n )
2nd attempt: Product Month Year Count XYZ January 2014 20 XYZ February 2014 14 NULL March 2014 0 XYZ April 2014 34 ...
What I want is this (as is shown above). Is this possible?
Desired outcome: Product Month Year Count XYZ January 2014 20 XYZ February 2014 14 XYZ March 2014 0 XYZ April 2014 34 ...
i have a table whose Primary Key is "UserID". the sample "UserID" are M1,M2,M3,M4,B1,B2,B3 . i want that when i insert a valuse "M4" in the table ,by pressing Submit Button. it should not be at the end or at the start of table. Rather it should be next to M3. like the following M1 M2 M3 M4 M5 B1 B2 B3 i need the C# code of how to do that !!!! Thanks
I have recently started using replication in SQL 2012 SP1. When a stored procedure is altered on the source, the changes are replicated to the subscribers; however, the comment headers are removed at the subscribers. Due to the vast number of stored procedures I have, I do not want to move the comments below the Create Procedure statement. Are there any other ways to have comment header move with the stored procedures?
Here is what I am experiencing
Source SP
ALTER PROCEDURE [dbo].[SPTest] AS BEGIN SELECT GETDATE() END
Destination SP
ALTER PROCEDURE [dbo].[SPTest] AS BEGIN SELECT GETDATE() END
missing witness server information and the fail-over is broken suddenly? 4:00am no maintenance job. I have one sql job on 10pm for backup on database transaction log only.
I can see the primary have problem then perform fail-over to mirror database, the auto fail-over was broken.
I re-build the sql mirror is OK , but i want to find the root cause.
Windows application event was full when there have many failed event, i have increase log size for application event.
I want to compare two columns in the same table called start date and end date for one clientId.if clientId is having continuous refenceid and sartdate and enddate of reference that I don't need any caseopendate but if clientID has new reference id and it's start date is not continuous to its previous reference id then I need to set that start date as caseopendate.
I have a query to run a report where the results has a column named “Due Date” which holds a date value based on the project submission date.Now, I need to add 4 columns named, “45 Days Expectant”, “30 Days Overdue”, “60 Days Overdue” and “90 Days Overdue”.I need to do a calculation based on the “Due Date” and “System (I mean default computer date) Date” that if “System Date” is 45 days+ to “Due Date” than put “Yes” in “45 Days Expectant” row.
Also, if “Due Date” is less than or equal to system date by 30 days, put “Yes” in “30 Days Overdue” and same for the 60 and 90 days.how to write this Case Statement? I have some answers how to do it in SSRS (Report Designer) but I want to get the results using T-SQl.
I'm writing a view to check record counts in a table that has numerous datasets and therefore various "Activity Dates". Is it possible as part of the SQL statement to have a CASE statement for example so that it can identify the field to use as the activity date?
The field to use is being identified using a seperate table so at the moment I have CASE WHEN FieldToUse = '2' THEN MapCol ELSE '[Activity_Date]' END, where FieldToUse = '2' identifies the date field to use and the MapCol data is the field name to be used as the activity date.
as you can see, the records have a 30minutes time interval. i need to create a query to know if there are missing records in the table. so basically the result should be this:
So I know that each employee should have 2 Type 1's and 4 Type 2's. I hope that makes sense, I'm trying to change my data because ours is very proprietary.
I need to identify employees who do not have all their stages and list the stages they are missing. The final report should only have employees and the associated missing types and stages.
I do a count by employee to see how many types they have to identify the ones that don't have all the types and stages.
My count would look something like this:
EmployeeNumber Type Total 100, 1, 2 100, 2, 2 200, 1, 1 200 1, 2
So I know that employee 100 should have 2 more Type 2's and employee 200 should have 1 more Type 1 and 2 more Type 2's based on the required list.
The problem I'm having is taking that required list and joining to my list of employees with missing data and pulling from it the types and stages that are missing by employee. I thought I could get a list of the employees that are missing information and right join it to the required list where the missing records would be nulls. But, that doesn't work because some employees do have the required information and so I'm not getting any nulls returned.
I would like to know different possible ways in appending extra values like new uniqueidentifiers, sequence numbers, random number. Can you please tell what type of data flow components helps us ?
I have two databases with different collation sequences, let them be called A (SQL_Latin1_General_CI_AS) and B (Latin1_General_CI_AS). Now I need to join between the two (including through temp tables with server collation being Latin1_General_CI_AS). In order to get rid of the errors when trying to do so I changed all my statements in the WHERE and ON clauses to
If I were to change the collation of the character typed columns in database A to the one in database B, would it make any difference in terms of performance, or would it just be a useless exercise? Just asking because many of those columns are part of a primary or foreign key that would need to first be dropped and then recreated after changing the collation, and I'd prefer to save myself the effort of writing scripts to do so if the answer is NO.
BTW, I tried to change the database's collation sequence, but that leaves the collation of the columns unchanged.
Hi, I'm inserting a datetime values into sql server 2000 from c#
SQL server table details Table nameate_test columnname datatype No int date_t DateTime
C# coding SqlConnection connectionToDatabase = new SqlConnection("Data Source=.\SQLEXPRESS;Initial Catalog=testdb;Integrated Security=SSPI"); connectionToDatabase.Open(); DataTable dt1 = new DataTable(); dt1.Columns.Add("no",typeof(System.Int16)); dt1.Columns.Add("date_t", typeof(System.DateTime)); DataRow dr = dt1.NewRow(); dr["no"] = 1; dr["date_t"] = DateTime.Now; dt1.Rows.Add(dr); for(int i=0;i<dt1.Rows.Count;i++) { string str=dt1.Rows["no"].ToString(); DateTime dt=(DateTime)dt1.Rows["date_t"]; string insertQuery = "insert into date_test values(" + str + ",'" + dt + "')"; SqlCommand cmd = new SqlCommand(insertQuery, connectionToDatabase); cmd.ExecuteNonQuery(); MessageBox.Show("saved"); } When I run the above code, data is inserted into the table The value in the date_t column is 2007-07-09 22:10:11 000.The milliseconds value is always 000 only.I need the millisecond values also in date_t column. Is there any conversion needed for millisecond values?
If Exists ( Select c.name from sys.columns c where object_id = object_id('HH835HP') and C.name = 'ID_1' ) Begin UPDATE HH835HP SET ID_1 = ( select ROW_NUMBER() OVER(ORDER BY CHKDTS ASC) AS ID_1 FROM HH835HP ) ; End;
Obviously... The stuff inside the IF is wrong syntax...I mean
UPDATE HH835HP SET ID_1 = ( select ROW_NUMBER() OVER(ORDER BY CHKDTS ASC) AS ID_1 FROM HH835HP ) ;
