I created a CTE which finds a subset of records from a table
I then ran a SELECT statement against the same table as
SELECT * FROM TABLE
EXCEPT (SELECT * FROM CTE)
Is it possible to add another EXCEPT statement after the CTE EXCEPT statement to cover a condition not incorporated in the CTE definition?
I have table 'stores' that has 3 columns (storeid, article, doc), I have a second table 'allstores' that has 3 columns(storeid(always 'ALL'), article, doc). The stores table's storeid column will have a stores id, then will have multiple articles, and docs. The 'allstores' table will have 'all' in the store for every article and doc combination. This table is like the master lookup table for all possible article and doc combinations. The 'stores' table will have the actual article and doc per storeid.
What I am wanting to pull is all article, doc combinations that exist in the 'allstores' table, but do not exist in the 'stores' table, per storeid. So if the article/doc combination exists in the 'allstores' table and in the 'stores' table for storeid of 50 does not use that combination, but store 51 does, I want the output of storeid 50, and what combination does not exist for that storeid. I will try this example:
'allstores' 'Stores'
storeid doc article storeid doc article
ALL 0010 001 101 0010 001
ALL 0010 002 101 0010 002
ALL 0011 001 102 0011 002
ALL 0011 002
So I want the query to pull the one from 'allstores' that does not exist in 'stores' which in this case would the 3rd record "ALL 0011 001".
I have a table structure where there are multiple "/" separated values in two columns that I need to parse out into single records.
CREATE TABLE CONFIGNEW(PlanID VARCHAR(100), GroupID VARCHAR(6), SubGroupID VARCHAR(255), AddOnCode VARCHAR(2), ExternalCode VARCHAR(20)
INSERT INTO CONFIGNEW(PlanID, GroupID, SubGroupID, ExternalCode) VALUES('101/201', '000005', 'LAA/OCA/UCA/XCA', '1', 'M231_1)
[Code] .....
The results I am looking to achieve are:
PLanIDGroupIDSubGroupIDAddOnCodeExternalCode
101000005LAA1M231_1
101000005OCA2M231_2
101000005UCA3M231_3
101000005XCA4M231_4
201000005LAA1M231_1
201000005OCA2M231_2
201000005UCA3M231_3
201000005XCA4M231_4
Is there an SQL statement that can be used to accomplish this?
writing the query for the following, I need to collapse the continuity. If the termdate for an ID is one day less than the effdate of the next id (for the same ID) i need to collapse the records. See below example .....how should i write the query which will give me the desired output. i.e., get min(effdate) and max(termdate) if termdate is one day less than the effdate of next record.
ID effdate termdate
556868 1999-01-01 1999-06-30
556868 1999-07-01 1999-10-31
556869 2002-10-01 2004-01-31
556872 1999-02-01 2000-08-31
556872 2000-11-01 2004-01-31
556872 2004-02-01 2004-02-29
output should be ......
ID effdate termdate
556868 1999-01-01 1999-10-31
556869 2002-10-01 2004-01-31
556872 1999-02-01 2000-08-31
556872 2000-11-01 2004-02-29
I'm looking for a way of taking a query which returns a set of date time fields (probable maximum of 20 rows) and looping through each value to see if it exists in a separate table.
E.g.
Query 1
Select ID, Person, ProposedEvent, DayField, TimeField
from MyOptions
where person = 'me'
Table
Select Person, ExistingEvent, DayField, TimeField
from MyTimetable
where person ='me'
Loop through Query 1 and if it finds ANY matching Dayfield AND Timefield in Query/Table 2, return the ProposedEvent (just as a message, the loop could stop there), if no match a message saying all is fine can proceed to process form blah blah.
I'm essentially wanting somebody to select a bunch of events in a form, query 1 then finds all the days and times those events happen and check that none of them exist in the MyTimetable table.
I have two tables that can be created with sample data using the DDL at the bottom of this post. What I'm looking to do is update the QtyReceived column in tblPurchaseOrderLineDetail from the Qty column in tblReceivedItems. However, the tricky part that I can't figure out is splitting these quantities out over multiple lines. I should only be allowed to receive up to the QtyOrdered column in tblPurchaseOrderLineDetail.
For a specific example from the sample data we'll look at PurchaseOrderDetailID 28526. From the tblReceivedItems, there are three records with quantities of 48, 48, and 20. From the tblPurchaseOrderLineDetail there are three records of QtyOrdered of 55, 45, and 20. What I would like to happen is fulfill the records in the tblPurchaseOrderLineDetail sequentially (essentially in order of ExpectedDate). So, the QtyReceived would be 55, 45, and 16 for the corresponding records. If there is already a quantity in the QtyReceived column, but it's less than the QtyOrdered column, the quantity needs to be added to the column (not overwritten).
DDL To CREATE Sample Tables and Data:
CREATE TABLE [dbo].[tblReceivedItems](
[ID] [int] IDENTITY(1,1) NOT NULL,
[PurchaseOrderDetailID] [int] NULL,
[Qty] [int] NULL)
SET IDENTITY_INSERT [dbo].[tblReceivedItems] ON
INSERT [dbo].[tblReceivedItems] ([ID], [PurchaseOrderDetailID], [Qty]) VALUES (1, 28191, 48)
[code]....
i have this query in a proc
declare @bu_id INT,
@CurCaptureDate DATETIME,
@user_id INT,
@col_name VARCHAR(100),
@sort_order VARCHAR(4),
@CityPair_ID INT=NULL,
[code]....
where @reasons and @departure_code can be multiple.
I have a requirement where I have the following separate tables:
Table A:
FldA FldB
34
35
43
53
54
55
64
74
75
Table B:
FldC FldD
1Break Begin
2Break End
3Out
4In
5Dept
Desired Result:
FldA FldD
3 In;Dept
4 Out
5 Out;In;Dept
6 In
7 In;Dept
I have played around with the newly discovered 'for xml path' but I can't quite seem to get the sql syntax right.
One of my varchar columns in a table has multiple key words enclosed in a pattern of special characters.
Eg: William Shakespeare was an English [##poet##], [##playwright##], and [##actor##], widely regarded as the greatest [##writer##] in the English language and the world's pre-eminent [##dramatist##]. He is often called England's national [##poet##] and the "Bard of Avon". His extant works, including some collaborations, consist of about 38 plays, 154 [##sonnets##], two long narrative [##poems##], and a few other [##verses##], of which the authorship of some is uncertain. His plays have been translated into every major living language and are performed more often than those of any other [##playwright##].
I need to write to query to find all distinct key words that are enclosed within [## and ##]. My query should yield the following results from the string in the example above
[##actor##]
[##dramatist##]
[##playwright##] -- 2 occurrances, but I need it only once in my result set
[##poems##]
[##poet##] -- 2 occurrances, but I need it only once in my result set
[##sonnets##]
[##verses##]
[##writer##]
I need to run this on a large table, so I am looking for the best possible way to minimize any performance issues.
Just give you sample code, I have provided below 2 separate snippets, one with table variable and another with temp table.
DECLARE @MyTable TABLE (MyString VARCHAR (8000))
INSERT @MyTable VALUES ('William Shakespeare was an English [##poet##], [##playwright##], and [##actor##], widely regarded as the greatest [##writer##] in the English language and the world''s pre-eminent [##dramatist##]. He is often called England''s national [##poet##] and the "Bard of Avon". His extant works, including some collaborations, consist of about 38 plays, 154 [##sonnets##], two long narrative [##poems##], and a few other [##verses##], of which the authorship of some is uncertain.
[code].....
I have 2 tables People and Scores. A person might have 1-5 scores (unknown at time of Query). I would like to query the two tables into a results table and if person does not have a record the score will be zero. Scores also have a test number so you know which score it is. I can get it done with Stored Proc but I have to use Temp tables and then put the temp tables together.
People
Name ID
Tom5
Dick2
Harry3
Larry4
Curly1
Scores
PrimaryKeyPeopleIDScoreTestNumber
12801
[code]....
Results
PrimaryKeyPeopleIdScore1Score2Score3Score4Score5Name
1110090807090Curly
22800000Dick
33909010000Harry
44507090900Larry
559070000Tom
I have a table with the following variables:
patid cddate nadcd4
Patients (patid) have multiple records. I am trying to find the lowest nadcd4 for each patient along with the associated cddate. I can do a min(nadcd4) and find the lowest nadcd4 by patid but I can't seem to get the associated cddate. Any suggestions? Thanks
wal
I ran the below 2 select statements and ended up seeing multiple cached instances of the same stored procedure. The majority have only one cached instance but more than a handful have multiple cached instances. When there are multiple cached instances of the same sproc, which one will sql server reuse when the sproc is called?
SELECT o.name, o.object_id,
ps.last_execution_time ,
ps.last_elapsed_time * 0.000001 as last_elapsed_timeINSeconds,
ps.min_elapsed_time * 0.000001 as min_elapsed_timeINSeconds,
ps.max_elapsed_time * 0.000001 as max_elapsed_timeINSeconds
[code]...
I have created a table but i forget in which database. I know the table name but i dont know the database name..
I have to filter my table from all database ... how can i do and find....
I am trying to find books which have the same title and publisher name as at least two other books and need to also show the book ref (ISBN number). I have the below script so far:
SELECT isbn, title, publishername
FROM book
WHERE title in (SELECT title
FROM book
GROUP BY title
HAVING count(title)>2 or count(publishername)>2)
order by title;
This is a snap shot of the output:
ISBN Title Publishername
0-1311804-3-6 C Prentice Hall
* 0-0788132-1-2 C OSBORNE MCGRAW-HILL
* 0-0788153-8-X C OSBORNE MCGRAW-HILL
* 0-9435183-3-4 C Database Development MIS
* 1-5582806-2-6 C Database Development MIS
[Code] ....
What I should be seeing is only the ones I have put an * next to. What am I missing from the scrip?
I have created some dynamic sql to check a temporary table that is created on the fly for any columns that do contain data. If they do the column name is added to a dynamic sql, if not they are excluded. This looks like:
If (select sum(Case when [Sat] is null then 0 else 1 end) from #TABLE) >= 1 begin set @OIL_BULK = @OIL_BULK + '[Sat]' +',' END
However, I am currently running this on over 230 columns and large tables 1.3 mil rows and it is quite slow. How I can dynamically create a sql script that only selects the columns in the table where there is data in a speedier manner. Unfortunately it has to be on the fly because the temporary table is created on the fly.
Can't seem to make this SQL query work!
Given one table, Table1, with columns Key1 (int), Key2 (int), and Type (varchar)...
I would like to get the rows where Type is equal to 'TypeA' and Key2 is Null that do NOT have a corresponding row in the table where Type is equal to 'TypeB' and Key2 is equal to Key1 from another row
So, given the data
**KEY1** **Key2** **Type**
1 NULL TypeA
2 5 TypeA
3 1 TypeB
4 NULL TypeA
5 NULL TypeB
I would like to return only the row where Key1 = 4 because that row meets the criteria of Type='TypeA'/Key2=NULL and does not have a corresponding row with Type='TypeB'/Key1=Key2 from another row.
I have tried this and it doesn't work...
SELECT t1.Key1, t1.Key2, t1.Type
FROM Table1 t1
WHERE t1.Key2 IS NULL
AND t1.Type LIKE 'TypeA'
AND t1.Key1 NOT IN
(SELECT Key1
FROM Table1 t2
WHERE t1.Key1 = t2.Key2
AND t1.Key1 <> t2.Key1
AND t2.Type LIKE 'TypeB')
I have the following Games table:
CREATE TABLE [dbo].[Games](
[ID] [int] IDENTITY(1,1) NOT NULL,
[Lge] [nvarchar](255) NULL,
[GameDate] [date] NULL,
[HomeTeam] [nvarchar](255) NULL,
[Home_Score] [float] NULL,
[AwayTeam] [nvarchar](255) NULL,
[Away_Score] [float] NULL)
with the following data:
INSERT INTO [dbo].[Games2]
([Lge]
,[GameDate]
,[HomeTeam]
,[Home_Score]
,[AwayTeam]
[Code] ....
This gives the standings as:
Team B4 - 1 -
Team C1 - 1 1.5
Team A2 - 5 3
How can I query the data to find the "games behind" at any date?
I am trying to update a small subset of records of a given table (TRValue) using the records contained in ParcelTemp. The difficult part is getting the summation from a child file, TRGreen, for those same parcels contained in ParcelTemp. Instead of updating just a few records, all the records in TRValue are being updated, with the wrong values of course!
Basically, Update records in TRValue that are equal to:
Year = P.Year
Code = 'LG01'
Parcel = P.Parcel
with the summation of child records where the child records needed are:
Year = P.Year
Parcel = P.Parcel
Code:
UPDATE TRValue SET
Acres = SumAcres,
CurrentMarket = SumMarket,
CurrentTaxable = SumTaxable,
CurrentTaxAmt = ((SumTaxable * D.CertifiedRate) + 0.50)
FROM ParcelTemp P
[code]....
Hello,
I need to pull records from single table such that I get a subset defined like this:
(
acctcode = 'xh364'
and
product = 'T&E'
)
And return all of the rest of the records:
(
acctcode = '%'
and
product = '%'
)
Can I do this within a WHERE clause, or will this require CASE / ELSE? There will be other specific acctcode/product rules that will be added later. I could do this with a UNION, but I need to avoid that if possible.
Thank you for your help!
cdun2
Hi,
OK, trying to return the results from two SQL statements into a DataSet using SqlDataAdapter. The SELECT statements query the same table but are looking for different records based on the date that the records were inserted - the 1st query looks for records fro the current month and the 2nd one looks at the same records but for the previous month. The goal is to be able to do some math within a repeater and get the difference between the two records.
Sounds easy enough and it has worked for me in different variations of the same idea but not this time - here's the code:
Protected Sub buildPartsReport(ByVal varHC) objConn.Open() sSQL = "SELECT ap.id,item_model,item_sn,aircraft_id,item_loc=item_type+ ' on ' +(SELECT tnum FROM T_Aircraft WHERE id=aircraft_id),apt.tot_time As endTimes,apt.tot_cycles as endCycles FROM T_Aircraft_Parts ap, T_Aircraft_Parts_Totals apt WHERE ap.id=apt.part_id AND report_date= '" & rD & "' AND item_type LIKE 'engine%';SELECT ap.id,apt.part_id,apt.tot_time as startTimes,apt.tot_cycles as startCycles FROM T_Aircraft_Parts ap, T_Aircraft_Parts_Totals apt WHERE ap.id=apt.part_id AND report_date= '" & oldRD & "' AND item_type LIKE 'engine%'" Dim objCommand As New SqlDataAdapter(sSQL, objConn) DS = New DataSet() objCommand.Fill(DS) Repeater1.DataSource = DS Repeater1.DataBind() DS.Dispose() objCommand.Dispose() objConn.Close() End Sub
Sorry if it wrapped a bit. The "rD" and "oldRD" are the variables for the date ranges (currently set to static numbers for testing). I'm getting the following error when I run this on an ASP.Net page:
System.Web.HttpException: DataBinding: 'System.Data.DataRowView' does not contain a property with the name 'startTimes'.
The code works fine when run via the Query Tool on the SQL server (SQL 2005 Std) though it produces two distinct "tables" which I'm guessing is the problem. I've tried variations on the code including creating a 2nd dataset and then attempting a merge (no joy) and I've tried the ".TableName" route but it complains about trying to add the tablename twice.
Thoughts? I need to get this to work - it is part of a reporting component for an application that I'm developing and I'm stuck. Thanks as always...
I am trying to add multiple records to my table (insert/select).
INSERT INTO Users
( User_id ,
Name
)
SELECT ( SELECT MAX(User_id) + 1
FROM Users
) ,
Name
But I get the error:
Violation of PRIMARY KEY constraint 'PK_Users'. Cannot insert duplicate key in object 'dbo.Users'.
But I am using the max User_id + 1, so it can't be duplicate
This would insert about 20 records.
Why the error?
I need to create a table from these 2 tables and want all the data. Table 1 has 15000 records and table has around 1000 records.
I have 2 tables.
SELECT [UniqueID]
,[Company]
,[CustID]
,[CustomerName]
,[FiscYr]
[Code] ....
CREATE TABLE DHS(CUSTOMERNBR VARCHAR(20), CONTRACT VARCHAR(20), SUBCONTRACT VARCHAR(20) , STARTDATE DATETIME, ENDDATE DATETIME, EFLAG VARCHAR(20), HFLAG VARCHAR(20))
The data which will be going into this table is from two table which have a 1 to many relationship:
Here is the 1 side and data:
CREATE TABLE CUSTOMERS(
CUSTOMERNBR VARCHAR(20),
CONTRACT VARCHAR(20),
SUBCONTRACT VARCHAR(20),
STARTDATE DATETIME,
ENDDATE DATETIME DEFAULT '12/31/2099')
[Code] ....
Here is the Many side and data:
CREATE TABLE FLAGS(CUSTOMERNBR VARCHAR(20), FLAGCODE VARCHAR(20), STARTDATE DATETIME, ENDDATE DATETIME DEFAULT '12/31/2099')
INSERT INTO FLAGS(CUSTOMERNBR, FLAGCODE, STARTDATE, ENDDATE) VALUES('10001000101', 'H', '02/01/2014', '03/31/2014')
[Code] ....
The CUSTOMERS table holds the record date span into which the FLAGS table records have to "fit". In no case will the date spans from the FLAGS table fall outside the STARTDATE - ENDDATE span in the CUSTOMERS table for any CUSTOMERNBR. Here is an example of the final expected output in the DHS table from combining records in the CUSTOMERS and FLAGS tables:
CUSTOMERNBRCONTRACTSUBCONTRACTSTARTDATEENDDATEEFLAGHFLAG
10001000101A910400801/01/201401/31/2014
10001000101A910400802/01/201403/21/2014H
10001000101A910400804/01/201404/30/2014
10001000101A910400805/01/201405/31/2014H
10001000101A910400806/01/201412/31/2099E
10001000102A555500101/01/201403/31/2014E
10001000102A555500104/01/201404/30/2014EH
10001000102A555500105/01/201406/30/2014E
10001000102A555500107/01/201412/31/2099
10001000103A666600401/01/201410/01/2014
I've 2 tables ResumeSkill (Child table) and Skill (Parent table), There are duplicates in the parent table and after removing the foreign key constraint in child table deleted all duplicate values from Parent table. But those deleted duplicate values has references in child table which need to be deleted now.
ResumeSkill Skill
Id SkillId
SkillId Name
I want to delete all the records from ResumeSkill that dont have matching skillId in Skill table.
My overarching goal is to generate sets of random Symptom records for each Enrollee in a drug study, so that for each cycle (period of time), the code will insert a random number of random records for each enrollee.
I'm trying to return a number of random records from a table, but inside a table-valued function... (which could be my problem).
CREATE FUNCTION dbo.ufn_GetTopSymptoms (
@enrollID INT
, @CTCVersion VARCHAR(20)
, @NumRecords INT
)
RETURNS TABLE
[Code] ....
But that ORDER BY NEWID() clause is illegal apparently, because here's the error it throws:
Msg 443, Level 16, State 1, Procedure ufn_GetTopSymptoms, Line 13
Invalid use of a side-effecting operator 'newid' within a function.
I was hoping I could return a set of enrollmentIDs and then use CROSS APPLY to generate a random set of records for each enrollmentID... is this not possible with APPLY? I was trying to avoid using a cursor...
The idea is basically to create all the Symptom records for all the patients in treatment cycle at once by using Enrollee OUTER APPLY dbo.ufn_GetTopSymtoms(dbo.Enrollment.EnrolleeID)
but that's clearly not working. Is there a way to do this without resorting to a cursor?
Our system runs a SQL Server 2012 DB, it has a table (table_a) which has over 10M records. Our system have to receive data file from previous system daily which contains approximate 3M updated or new records for table_a. My job is to update table_a with the new data.
The initial solution is:
1 Create a table (table_b) which structur is as the same as table_a
2 Use BCP to import updated records into table_b
3 Remove outdated data in table_a:
delete from table_a inner join table_b on table_a.key_fileds = table_b.key_fields
4 Append updated or new data into table_a:
insert into table_a select * from table_b
As the test result, this solution is very inefficient. Step 3 costs several hours, e.g. How can I improve it?
There is a valuable script out there that will take the rows from a table and display INSERT STATEMENTS.
Good thing is this script converts the data to HEXADECIMAL ( or some other ) and we don't have to worry about dealing with apostrophies embedded in varchar fields.
Here is my requirement, How to handle using SSIS.
My flatfile will have multiple columns like :
ID key1 key2 key3 key 4
I have SP which accept 3 parameters ID, Key, Date
NOTE: Key is the coulm name from the Excel. So my sp call look like
sp_insert ID, Key1, date
sp_insert ID, Key2,date
sp_insert ID, Key3,date
i have below queries each select is fetching records at one level. Is there a way i can write single query to get to nth level (recursion) instead joining same table 10 times (i don't know in some cases there is may be next level) I stopped at 10th level now. In below example i gave only two levels.
SELECT Distinct
a.Col1 AS EmpID,
a.Col1 AS EmpID,
a.Col2 AS Emp_guid,
a.Col2 AS Emp_guid,
case
[code].....
How to create insert statements of the data from a table for top 'n' rows. I know we can create using generate scripts wizard, but we can't customize the number of rows. In my scenario i got a database with 10 tables where every table got millions of records, but the requirement is to sample out only top 10000 records from each table.
I am planning to generate table CREATE statements from GENERATE Scripts wizard and add this INSERT STATEMENT at the bottom.
EX : INSERT [dbo].[table] ([SERIALID], [BATCHID] VALUES (126751, '9100278GC4PM1', )
I have two tables called ECASE and PROJECT
In the ECASE table there is trigger to get the max value of case_id column in ecase based on project and increment one to that case_id value and insert into ecase table .
When we insert a new record to the ECASE table this trigger calls and insert the case_id column value.
When i run with multiple threads , the transaction is rolled back because of trigger . The reason is , on the project table the lock is happening while getting the max value of case_id column based on project.
I need to prevent the deadlock .
Assuming I should be using values from temp inserted to insure correct record...
Need help coding IF...THEN INSERT statements in following After TRIGGER:
Create TRIGGER trg_insertItemRows
ON dbo.a_form
AFTER INSERT
AS
SET NOCOUNT ON
-- Checkbox Driven:
IF a_form.missingCheckbox = -1 THEN
Insert into b_items (form_ID, parent_ID, ItemTitle)
Values (Select Distinct i.form_ID,i.parent_ID from inserted i)', '+ 'User checked Missing Data')
-- Textbox Driven:
IF a_form.incorrectTxtbox <> 'na' THEN
Insert into b_items (form_ID, parent_ID, ItemTitle)
Values (Select Distinct i.form_ID,i.parent_ID from inserted i)', '+ Correction: Replace '+ incorrectTxtbox + ' with '+replaceWithTxtbox)
Sample code below:
-- Source table the Trigger acts on
Create Table a_form (
form_ID int Not Null,
parent_ID int,
missingCheckbox bit,
missingNote varchar(100),
incorrectTxtbox varchar(50),
replaceWithTxtbox varchar(50)
)
--Target table Trigger inserts into
Create Table b_items (
items_ID int Not Null,
form_ID int Not Null,
parent_ID int,
ItemTitle varchar(150)
)
I am monitoring our production server, and noticed that periodically we have spikes of Memory Paging Rate (pages/sec).
How to find particular queries/stored procedures that causing this?