SQL Server 2012 :: Get ID From Lookup Table Based On Value Passed To Function
Dec 19, 2014
I have a requirement regarding a color combination data. I have a lookup table that holds a colorid, p1, p2, p3, p4 to p8 which will be having colors Red, Green and Amber. P1 to P8 columns holds these three colors based on their combinations.
I have attached the look up table data for reference.I need to pass the color values to p1 to p8 and need to retrieve the color id based on the passed color. If we pass values for all p1 to p8 then it is easy to get the color code, however it will not happen. The passed values may be dynamic. ie we will not have all 8 values all the times. sometimes we will have 2 colors passed, sometimes 5 colors will be passed.
If i pass only two colors say red and red, i need the color id of only the row that has red and red for p1 and p2 alone. i dont want want all the colorid's that has red and red in p1 and p2 and some other colors in p3 to p4.
The exact colorid of the combination must be returned on passing the values to p1 and p2.I am passing Red and Red as values to P1 and P2. In the look up table we can have 10 rows that has red and red i p1 and p2 like
colorid p1p2p3p4p5p6p7p8
1 redred
10 redredred
20 redredred
30 redredredred
40 redredredredred
50 redredredredredred
60 redredredredredredred
70 redredredredredredredred
So the result must have only the colorid 1 and not all the colorid's listed above. when I pass 3 red as values for p1, p2, p3 then the result must be 10. Colorid 1, 20, 30, 40, 50, 60 and 70 must not come in the result.I need a function or procedure that will accept the arguments and provide me the result based on the values.
View 2 Replies
ADVERTISEMENT
Apr 22, 2015
I have a function that accepts a date parameter and uses getdate() as its default value. If a date is passed in, I'm going to have to find records using the datediff method based on input. If no date is passed, I am going to bypass the datediff logic and search for records based on a column called "is_current" which will reduce the query time.
However, I don't know how to tell if the date value in the function came from an input or was the default.
View 4 Replies
View Related
Jul 15, 2014
I am writing a stored procedure that takes in a customer number, a current (most recent) sales order quote, a prior (to most current) sales order quote, a current item 1, and a prior item 1, all of these parameters are required.Then I have current item 2, prior item 2, current item 3, prior item 3, which are optional.
I added an IF to check for the value of current item 2, prior item 2, current item 3, prior item 3, if there are values, then variable tables are created and filled with data, then are retrieved. As it is, my stored procedure returns 3 sets of data when current item 1, prior item 1, current item 2, prior item 2, current item 3, prior item 3 are passed to it, and only one if 2, and 3 are omitted.I would like to learn how can I return this as a one data set, either using a full outer join, or a union all?I am including a copy of my stored procedure as it is.
View 6 Replies
View Related
Jun 23, 2015
Using the following:
SQL Server: SQL Server 2012
Visual Studio 2012
I have created an SSIS package where I have added an Execute SQL Task to run an existing stored procedure in my SQL database.
General Tab:
Result Set: None
Connection Type: OLE DB
SourceType: Direct Input
IsQueryStoredProcedure: False (this is greyed out and cannot be changed)
Bypass Prepare: True
SQL Statement: EXEC FL_CUSTOM_sp_ml_location_load ?, ?;
Parameter Mapping:
Variable Name Direction Data Type Prmtr Name Prmtr Size
User: system_cd Input NVARCHAR 0 10
User: location_type_cd Input NVARCHAR 1 10
Variables:
location_type_cd - Data type - string; Value - Store (this is static)
system_cd - Data type - string - ??????
The system code changes based on the system field for each record in the load table
Sample Data:
SysStr # Str_Nm
3 7421Store1
3 7454Store2
1815061Store3
1815063Store4
1615064Store5
1615065Store6
1615066Store7
7725155Store8
STORED PROCEDURE: The stored procedure takes data from a load table and inserts it into another table:
Stored procedure variables:
ALTER PROCEDURE [dbo].[sp_ml_location_load]
(@system_cd nvarchar(10), @location_type_cd nvarchar(10))
AS
BEGIN .....................
This is an example of what I want to accomplish: I need to be able to group all system 3 records, then pass 3 as the parameter for system_cd, run the stored procedure for those records, then group all system 18 records, then pass 18 as the parameter for system_cd, run the stored procedure for those records and keep doing this for each different system in the table until all records are processed.
I am not sure how or if it can be done to pass the system parameter to the stored procedure based on the system # in the sys field of the data.
View 6 Replies
View Related
Sep 26, 2014
Using a string of IDs passed into a stored procedure as a VARCHAR parameter ('1,2,100,1020,') in an IN without parsing the list to a temp table or table variable. Here's the situation, I've got a stored procedure that is called all the time. It's working with some larger tables (100+ Million rows). The procedure passes in as one of the variables a list of IDs for the large table. This list can have anywhere from 1 to ~100 IDs passed to it.
Currently, we are using a function to parse the list of IDs into a temp table then joining the temp table to get the query:
CREATE PROCEDURE [dbo].[GetStuff] (
@IdList varchar(max)
)
AS
SET NOCOUNT ON
SET TRANSACTION ISOLATION LEVEL READ UNCOMMITTED
[Code] .....
The problem we're running into is that since this proc gets called so often, we sometimes run into tempDB contention that slows this down. In my testing (unfortunately I don't have a good way of generating a production load) swapping the #table for an @table didn't make any difference which makes sense to me given that they are both allocated in the tempDB. One approach that I tried was that since the SELECT query is pretty simple, I moved it to dynamic SQL:
CREATE PROCEDURE [dbo].[GetStuff] (
@IdList varchar(max)
)
AS
SET NOCOUNT ON
SET TRANSACTION ISOLATION LEVEL READ UNCOMMITTED
[Code] ....
The problem I had there, is that it creates an Ad Hoc plan for the query and only reuses it if the same list of parameters are passed in, so I get a higher CPU cost because it compiles a plan and it also causes the plan cache to bloat since the parameter list is almost always different. Is there an approach that I haven't considered that may get the best of both worlds, avoiding or minimizing tempDB contention but also not having to compile a new plan every time the proc is run?
View 9 Replies
View Related
Dec 4, 2014
I'm trying to get a calculation based on count(*) to format as a decimal value or percentage.
I keep getting 0s for the solution_rejected_percent column. How can I format this like 0.50 (for 50%)?
select mi.id, count(*) as cnt,
count(*) + 1 as cntplusone,
cast(count(*) / (count(*) + 1) as numeric(10,2)) as solution_rejected_percent
from metric_instance mi
INNER JOIN incident i
on i.number = mi.id
WHERE mi.definition = 'Solution Rejected'
AND i.state = 'Closed'
group by mi.id
id cnt cntplusone solution_rejected_percent
-------------------------------------------------- ----------- ----------- ---------------------------------------
INC011256 1 2 0.00
INC011290 1 2 0.00
INC011291 1 2 0.00
INC011522 1 2 0.00
INC011799 2 3 0.00
View 5 Replies
View Related
Nov 19, 2014
I'm using SS 2012.
I started with an inline table returning function with a hard coded input table name. This works fine, but my boss wants me to generalize the function, to give it in input table parameter. That's where I'm running into problems.
In one forum, someone suggested that an input parameter for a table is possible in 2012, and the example I saw used "sysname" as the parameter type. It didn't like that. I tried "table" for the parameter type. It didn't like that.
The other suggestion was to use dynamic sql, which I assume means I can no longer use an inline function.
This means switching to the multi-line function, which I will if I have to, but those are more tedious.
Any syntax for using the inline function to accomplish this, or am I stuck with multi-line?
A simple example of what I'm trying to do is below:
Create FUNCTION [CSH388102].[fnTest]
(
-- Add the parameters for the function here
@Source_Tbl sysname
)
RETURNS TABLE
AS
RETURN
(
select @Source_Tbl.yr from @Source_Tbl
)
Error I get is:
Msg 1087, Level 16, State 1, Procedure fnTest, Line 12
Must declare the table variable "@Source_Tbl".
If I use "table" as the parameter type, it gives me:
Msg 156, Level 15, State 1, Procedure fnTest, Line 4
Incorrect syntax near the keyword 'table'.
Msg 137, Level 15, State 2, Procedure fnTest, Line 12
Must declare the scalar variable "@Source_Tbl".
The input table can have several thousand rows.
View 9 Replies
View Related
Aug 25, 2014
We have a database and have 6-7 growing tables. All the tables have Primary and foreign key relation. I want to do partition based on the date column.
I need 3 partitions
First partition has to hold present data
second partition need to hold the previous year data (SAS storage)
Third partition need to hold all the old data and need to be in the archive database
I understand that first we need to disable the constraints (Indexes PK & FK)
Then create partition function and partition schema
Then Create the Constraints again
View 9 Replies
View Related
Nov 13, 2014
I could deploy across my environment, which is a mix of 2008R2/2012 servers, to give some information on log files. Running into a silly issue right off the bat. The table that DBCC LogInfo() conjures out of magic is different between the two. In 2012 it gained the RecoveryUnitID column. So I'm trying to write some logic to create a temp table based on which version is running. I would like to avoid a global temp table if possible. Here's what I've tried:
sp_executesql creates a table outside of the scope of my session:
DECLARE @PrVers NVARCHAR(128)
, @PrVersNum DECIMAL(10,2)
, @StageTable NVARCHAR(1024) = N''
[code]....
View 9 Replies
View Related
Jun 27, 2007
Hi All,
Actually this is in regard to SCD Type 2 Dimension, Scenario is like that I am moving Fact table from some old source and I have dimensionA description value in fact which I want to replace with appropriate id from Dimension Table and that Dimension table is SCD Type 2 based on StartDate and EndDate and Fact Table doesn't contains direct date value rather there is timeId in Fact so to update the value in Fact table I have to Join Time Dimension table and other Dimension Table to replace fact Description with proper Id.
Lets assume DimensionA Structure
id
Description
StartDate
EndDate
Fact Table
id
measure1
measure2
TimeId
Description
Time Dimension
TimeId
Date
Day
Hour ...
View 1 Replies
View Related
May 20, 2014
I have a table with PO#,Days_to_travel, and Days_warehouse fields. I take the distinct Days_in_warehouse values in the table and insert them into a temp table. I want a script that will insert all of the values in the Days_in_warehouse field from the temp table into the Days_in_warehouse_batch row in table 1 by PO# duplicating the PO records until all of the POs have a record per distinct value.
Example:
Temp table: (Contains only one field with all distinct values in table 1)
Days_in_warehouse
20
30
40
Table 1 :
PO# Days_to_travel Days_in_warehouse Days_in_warehouse_batch
1 10 20
2 5 30
3 7 40
Updated Table 1:
PO# Days_to_travel Days_in_warehouse Days_in_warehouse_batch
1 10 20 20
1 10 20 30
1 10 20 40
2 5 30 20
2 5 30 30
2 5 30 40
3 7 40 20
3 7 40 30
3 7 40 40
How can I update Table 1 to see desired results?
View 3 Replies
View Related
Oct 1, 2015
The objective is to identify orders where an order fee has been applied incorrectly. I have multiple orders per customer, my table contains an orderID and a customerID. Currently if the customer places additional orders before the previous orders have been closed/cancelled, then additional fees are being applied.
Let's say I'm comparing order #1 to order #2. I need to identify these rows where the following is true:-
The CustID is the same.
Order #2 has a more recent order date.
Order #2 has a FeeDate Before the CancelledDate of Order #1 (or Order #1 has no cancellation date).
So in the table the orderID:2835692 of CustID: 24643 has a valid order fee. But all the subsequently placed orders have fees which were applied before the first order was cancelled and so I want to update the FeeInvalid column with a 'Y'. The first fee will always be valid.
I think I understand why the code I am trying doesn't achieve the result I want but I can't figure out how to write it correctly. Below is one example of code I've tried and also code to create the table and insert some test data.
update t1
SET FeeInvalid = 'Y'
FROM MockData t1 Join MockData t2 on t1.CustID = t2.CustID
WHERE t1.CustID = t2.CustID
AND t2.OrderDate > t1.OrderDate
AND t2.FeeDate > t1.CancelledDate
CREATE TABLE [dbo].[MockData](
[OrderID] [float] NULL,
[code]....
View 4 Replies
View Related
Sep 29, 2015
Currently i am using SQL Server 2012 Import/Export Wizard to upload data to sql tables manually. However i was trying to write a procedure to update that table. and on the time of execution, if i can pass excel. Is there any way to pass excel to stored procedure parameter?
View 1 Replies
View Related
Mar 13, 2014
I am creating a function where I want to pass it parameters and then use those parameters in a select statement. When I do that it selects the variable name as a literal not a column. How do I switch that context.
Query:
ALTER FUNCTION [dbo].[ufn_Banner_Orion_Employee_Comparison_parser_v2]
(
@BANNER_COLUMN AS VARCHAR(MAX),
@ORION_COLUMN AS VARCHAR(MAX)
)
RETURNS @Banner_Orion_Employee_Comparison TABLE
[code]....
Returns:
I execute this:
select * from ufn_Banner_Orion_Employee_Comparison_parser_v2 ('a.BANNER_RANK' , 'b.[rank]')
and get:
CerecerezNULLNULLa.BANNER_RANKb.[rank]
View 7 Replies
View Related
Oct 16, 2015
I need removing cursor in my table valued function with alternate code.
ALTER FUNCTION [dbo].[eufn_e5_eSM_SE_GetCurrentContentForContainer]
(
@containerSqlId SMALLINT,
@containerIncId INT
)
RETURNS @Results TABLE
[Code] ....
View 2 Replies
View Related
Apr 24, 2014
I have table A (EmployeeNumber, Grouping, Stages)
and
Table B (Grouping, Stages)
Table A could look like the following where the multiple employees could have multiple types and multiple stages.
EmployeeNumber, Type, Stages
100, 1, Stage1
100, 1, Stage2
100, 2, Stage1
100, 2, Stage2
200, 1, Stage1
200, 2, Stage2
Table B is a list of requirements that each employee must have. So every employee must have a type 1 and 2 and the associated stages listed below.
Type, Stage
1, Stage1
1, Stage2
2, Stage1
2, Stage2
2, Stage3
2, Stage4
So I know that each employee should have 2 Type 1's and 4 Type 2's. I hope that makes sense, I'm trying to change my data because ours is very proprietary.
I need to identify employees who do not have all their stages and list the stages they are missing. The final report should only have employees and the associated missing types and stages.
I do a count by employee to see how many types they have to identify the ones that don't have all the types and stages.
My count would look something like this:
EmployeeNumber Type Total
100, 1, 2
100, 2, 2
200, 1, 1
200 1, 2
So I know that employee 100 should have 2 more Type 2's and employee 200 should have 1 more Type 1 and 2 more Type 2's based on the required list.
The problem I'm having is taking that required list and joining to my list of employees with missing data and pulling from it the types and stages that are missing by employee. I thought I could get a list of the employees that are missing information and right join it to the required list where the missing records would be nulls. But, that doesn't work because some employees do have the required information and so I'm not getting any nulls returned.
View 9 Replies
View Related
Dec 19, 2013
My overarching goal is to generate sets of random Symptom records for each Enrollee in a drug study, so that for each cycle (period of time), the code will insert a random number of random records for each enrollee.
I'm trying to return a number of random records from a table, but inside a table-valued function... (which could be my problem).
CREATE FUNCTION dbo.ufn_GetTopSymptoms (
@enrollID INT
, @CTCVersion VARCHAR(20)
, @NumRecords INT
)
RETURNS TABLE
[Code] ....
But that ORDER BY NEWID() clause is illegal apparently, because here's the error it throws:
Msg 443, Level 16, State 1, Procedure ufn_GetTopSymptoms, Line 13
Invalid use of a side-effecting operator 'newid' within a function.
I was hoping I could return a set of enrollmentIDs and then use CROSS APPLY to generate a random set of records for each enrollmentID... is this not possible with APPLY? I was trying to avoid using a cursor...
The idea is basically to create all the Symptom records for all the patients in treatment cycle at once by using Enrollee OUTER APPLY dbo.ufn_GetTopSymtoms(dbo.Enrollment.EnrolleeID)
but that's clearly not working. Is there a way to do this without resorting to a cursor?
View 9 Replies
View Related
Sep 19, 2014
SELECT MAX(ID)
FROM [LinkedServer].[Database].dbo.[TableName] (NOLOCK)
WHERE <Condition>
The above SQL Script ran successfully up to yesterday. But today its throws the below error message.
Remote table-valued function calls are not allowed.
Now i have modified the SQL script as follows
SELECT MAX(ID)
FROM [LinkedServer].[Database].dbo.[TableName] WITH (NOLOCK)
WHERE <Condition>
I want to know how the 1st SQL script runs successfully up to yesterday.
View 7 Replies
View Related
Aug 6, 2014
We have a LKP table that we will use to decode incoming codes from multiple sales feeds to link to the relevant surrogate key for the ultimate dimension table.
The LKP table has a start date, end date and active row flag to track history of the codes.
This table in its entirety is required for the FULL history load but we will need a CURRENT version of the table containing only the ACTIVE rows for the DAILY incremental loading.
I am thinking of putting a standard view over the top of the LKP table to present only the ACTIVE rows rather than creating a 2nd table and reloading it each night. We don't have enterprise edition to use materialised views.
My question is, will the LKP cache populate as the SSIS packages begins, loading it with all the rows from the view, as it would if I used the 2nd physical table with only ACTIVE rows?
View 3 Replies
View Related
Aug 3, 2007
Hi all - this one has me stumped... PLEASE HELP!!!
I have a back/forward navigation link that passes a URL.startrow number (lets call it n) - based on n - I only want to select the record that is the n'th record based on a sort order (gall_order) - (SQL SERVER).
<cfquery name="gallHomePic1st" datasource="id" maxrows="1">
SELECT id
FROM gall_home
ORDER BY gall_order asc
</cfquery>
For e.g. - I want the 7th (14th - 21st etc) record based on gall_order asc.
Thanks guys - this has me stumped!
View 4 Replies
View Related
Dec 20, 2014
I have a requirement regarding a color combination data. I have a lookup table that holds a colorid, p1, p2, p3, p4 to p8 which will be having colors Red, Green and Amber. P1 to P8 columns holds these three colors based on their combinations.
I have attached the look up table data for reference.
I need to pass the color values to p1 to p8 and need to retrieve the color id based on the passed color.
If we pass values for all p1 to p8 then it is easy to get the color code, however it will not happen. The passed values may be dynamic. ie we will not have all 8 values all the times. sometimes we will have 2 colors passed, sometimes 5 colors will be passed.
If i pass only two colors say red and red, i need the color id of only the row that has red and red for p1 and p2 alone. i dont want want all the colorid's that has red and red in p1 and p2 and some other colors in p3 to p4.
The exact colorid of the combination must be returned on passing the values to p1 and p2.
To elaborate; I am passing Red and Red as values to P1 and P2. In the look up table we can have 10 rows that has red and red i p1 and p2 like
colorid p1p2p3p4p5p6p7p8
1 redred
10 redredred
20 redredred
30 redredredred
40 redredredredred
50 redredredredredred
60 redredredredredredred
70 redredredredredredredred
So the result must have only the colorid 1 and not all the colorid's listed above. when I pass 3 red as values for p1, p2, p3 then the result must be 10. Colorid 1, 20, 30, 40, 50, 60 and 70 must not come in the result.
I need a function or procedure that will accept the arguments and provide me the result based on the values.
[URL]
View 1 Replies
View Related
May 16, 2008
On my Home page I have a gridview that has Four columns: CustomerID, Product, Quantity, then a link (which appears on each row..called View). When a user clicks View on a particular row it will then send that particular CustomerID to the next page (CustomerProfile.aspx).
On the CustomerProfile.aspx page I have a textbox where the Customer Name should appear. How do I go about displaying the customer name in the textbox based on the CustomerID passed to the customerprofile.aspx page? Do I need to call a stored procedure? Do i need to call the Customer Table in my code?
(i'm using C#) Thanks!! Ur help is very much appreciated!
Side Note: i am passing the CustomerID by a SESSION variable called customerID ~~~>this is in my pageLoad method labelCustomerID.Text = Session["customerID"].ToString();
but i'm wanting to have the Customer Name in a textbox based on the above ^^^ session variable. My textbox is called txtCustomerName.Text
*** Customer Table***CustomerIDCustomerNameCustomerAddress
^^^wanting to call the customer name and put it in the customer name text box based on the particular customerID
View 22 Replies
View Related
Aug 16, 2007
Hello,
I need to check if the IDs in table A on the server X exist in table B (if not check table C, if not in C, check table D ) on the server Y. The problem is that the table name changes every year and I need to use the variable for the reference table name in LookUp component in the Dataflow Task.
Can anyone help me?
View 1 Replies
View Related
Sep 21, 2006
Hey,First, sorry if this post appear twice, because, I can not find my postrecently send, trying to post it once again.I'm out of ideas, so, I thought, will search help here again :(I'm trying to prepare a view for ext. app. This is in normal cases veryeasy, but what if the view structure should be dynamic?!Here is my point (I will siplify the examples).I have a table:create table t_data (id bigint identity (1,1) not null,valvarchar(10) not null,data varchar(100) not nullconstraint [PK_t_data] primary key clustered(id) with fillfactor = 90 on [PRIMARY] )goinsert into t_data (val, data) values('1111111111','1234567890abcdefghijklmnoprstuvwxyz 1234567890abcdefghijklmnoprstuvwxyz67890abcdefghij klmnoprstuvwxyz')insert into t_data (val, data) values('2222222222','1234567890abcdefghijklmnoprstuvwxyz 1234567890abcdefghijklmnoprstuvwxyz12345abcdefghij klmnoprstuvwxyz')insert into t_data (val, data) values('3333333333','12345abcdefghijklmnoprstuvwxyz12345 67890abcdefghijklmnoprstuvwxyz1234567890abcdefghij klmnoprstuvwxyz')insert into t_data (val, data) values('4444444444','67890abcdefghijklmnoprstuvwxyz12345 67890abcdefg12345hijklmnoprstuvwxyz67890abcdefghij klmnoprstuvwxyz')insert into t_data (val, data) values('5555555555','1230abcdefghijklmnoprst12345uvwxyz1 234567890abcdefghijklmnoprstuvwxyz67890abcdefghijk lmnoprstuvwxyz')gocreate table t_dataVal (id bigint identity (1,1) not null,valvarchar(10) not null,fill varchar(4) not nullconstraint [PK_t_dataVal] primary key clustered(id) with fillfactor = 90 on [PRIMARY] )goinsert into t_dataVal (val, fill) values ('1111111111','AAAA')insert into t_dataVal (val, fill) values ('2222222222','KKKK')insert into t_dataVal (val, fill) values ('3333333333','DDDD')insert into t_dataVal (val, fill) values ('4444444444','ZZZZ')insert into t_dataVal (val, fill) values ('5555555555','CCCC')gocreate table t_conf (id bigint identity (1,1) not null,start int not null,length int not null,description varchar(20) not null,constraint [PK_t_conf] primary key clustered(id) with fillfactor = 90 on [PRIMARY] )goinsert into t_conf (start, length, description) values (1,10,'value_1')insert into t_conf (start, length, description) values (11,3,'value_2')insert into t_conf (start, length, description) values(55,15,'value_3')insert into t_conf (start, length, description) values (33,2,'value_4')insert into t_conf (start, length, description) values (88,1,'value_5')insert into t_conf (start, length, description) values (56,7,'value_6')goNow here is the issue:table t_conf contain data, which can be modified by user. The user isseting the appropriate values.Now, there should be a view, which returns:- as headers (collumn names) this what is defined in description columnof t_conf (for example: value_1, value_2 ... value_6)- as values, substrings of all data from t_data, cutted with start andlength values for appropriate decription from t_conf.- first two columns of view, should be column val and fill of t_dataValtableSo the effect should be like this:valfillvalue_1value_2value_3value_4value_5value61111111111AAAA1234567890abc....2222222222KKKK1234567890abc....3333333333DDDD12345abcdefgh....4444444444ZZZZ67890abcdefgh....5555555555CCCC1230abcdefghi....of course, for all other value_x should be the appropriate substringsshown.Sounds simple, hm?Well, I'm trying to do this, since yesterday evening, and can not :(In real life, the call of view/function might happend a lot.The table t_data might have around 4000 records, but the data string islonger (around 3000 characters).Application, might acess a udf, which returns table, and I was focusingin that.Was trying, to create local temp table in function, to insert values,using cursor over t_conf.Unfortunately, everything what I get, is just a vertical representationof the data, and I need it horizontal :(The other problem in function is, that I can not use exec() (wll known)so I can not even create a table,dynamicly, using as column names description value from table t_conf,and as size of field length from this table.Sorry, that the description is maybe not exactly for my problem, butthis is because I'm not even sure, which way to use :(any help will be appreciated!Thank You - Matik
View 1 Replies
View Related
Dec 15, 2005
Hi,
We are seeing memory issues with a simple C# based TVF that splits an input string into a table based a delimiter. Entries such as the following show up in the SQL log:
AppDomain 8 (DBName.dbo[runtime].7) is marked for unload due to memory pressure.
AppDomain 8 (DBName.dbo[runtime].7) unloaded.
These entries only show up after the TVF has been called many times (~ half million times or more).
We encountered the same memory issues with June CTP, but they appeared to be fixed in Sepetmber CTP. Somehow the issues come back for us in the SQL Server 2005 RTM version. With June CTP after these errors show up many many times, the SQL server had to be re-started.
I'd appreciate any comments/ideas regarding these error messages in the SQL log?
We are using the RTM version of SQL2005: Microsoft SQL Server 2005 - 9.00.1399.06 (Intel X86)
Oct 14 2005 00:33:37
Copyright (c) 1988-2005 Microsoft Corporation
Enterprise Edition on Windows NT 5.2 (Build 3790: Service Pack 1)
Thanks,
Wenbin Zhang
View 10 Replies
View Related
May 28, 2015
I have this table:
with actividades_secundarias as (
select a.*, r.Antigo, r.Novo, rn = row_number()
over (PARTITION BY a.nif_antigo, r.novo ORDER BY a.nif_antigo)
from ACT_SECUNDARIAS a inner join
((select
[Code] ....
I want to make a delete statement like this:
select * into #table1 from actvidades_secundarias where rn>1
Delete from act_secundarias where act_secundarias.nif_antigo = #table1.nif_antigo and act_secundarias.cod_cae = #table1.cod_cae
But it seems that I cant delete like this.
View 5 Replies
View Related
Nov 12, 2004
Does anyone know what the above error message means?
View 4 Replies
View Related
Mar 3, 2014
I have a sql job which will execute the below stored proc.
Basically it Refresh the data by truncating the tables and using BCP to import the data. Job was running fine but today got a error message.
Invalid length parameter passed to the substring function. [SQLSTATE 42000] (Error 536). The step failed.
USE [database]
GO
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE Procedure [dbo].[Refresh_tables]
[Code] ......
View 2 Replies
View Related
Feb 1, 2008
Hi,
I was trying to execute the following query.
select substring(ISNULL(CAST(FullAdress AS NVARCHAR(MAX)),''),1,charindex(',',ISNULL(CAST(FullAdress AS NVARCHAR(MAX)),''))-1) from tbl_lrf_company_details_with_codes
but i am getting the error as "Invalid length parameter passed to the SUBSTRING function."
Please advice
Thanks In advance
View 4 Replies
View Related
May 27, 2008
SELECT
C.Description,
SUBSTRING (
(CONVERT (VARCHAR (255), D.CurrentXmlValue)), --expression
(CHARINDEX ('>', CONVERT (VARCHAR (255), D.CurrentXmlValue)) + 1), --start
( (LEN (CONVERT (VARCHAR (255), D.CurrentXmlValue))) -
(CHARINDEX ('>', CONVERT (VARCHAR (255), D.CurrentXmlValue))*2) - 1
)--length
) AS Version
FROM
:
:
WHERE
:
:
This does not work while
:
:
--SUBSTRING (
(CONVERT (VARCHAR (255), D.CurrentXmlValue)) as expression, --expression
(CHARINDEX ('>', CONVERT (VARCHAR (255), D.CurrentXmlValue)) + 1) as start, --start
( (LEN (CONVERT (VARCHAR (255), D.CurrentXmlValue))) -
(CHARINDEX ('>', CONVERT (VARCHAR (255), D.CurrentXmlValue))*2) - 1
) as length --length
--) AS Version
:
:
works!!
I get
Msg 536, Level 16, State 5, Line 2
Invalid length parameter passed to the SUBSTRING function.
Error.
Any idea why i am getting this??
I am trying to get rid of xml tags in the column.
Thanks,
View 4 Replies
View Related
Sep 28, 2007
Hi,
I am using a simple procedure to pivot results (found in another forum and adapted it). It is done on SQL Server 2005 server with all service packs. Procedure:
**************
ALTER Procedure [dbo].[EthnicityPivot] @StDate as Datetime, @EndDate as Datetime
as
begin
DECLARE @Teams varchar(2000)
truncate table ForEthnicPivot
INSERT INTO ForEthnicPivot
SELECT DISTINCT COUNT(ID), Team, Ethnicity
FROM dbo._EthnicityByTeamEpisode
where Startdate between @StDate and @EndDate
GROUP BY Ethnicity, Team
SET @Teams = ''
--// Get a list of the pivot columns that are important to you.
SELECT @Teams = @Teams + '[' + Team + '],'
FROM (SELECT Distinct Team FROM ForEthnicPivot) Team
--// Remove the trailing comma
SET @Teams = LEFT(@Teams, LEN(@Teams)-1)
--// Now execute the Select with the PIVOT and dynamically add the list
--// of dates for the columns
EXEC( 'SELECT * FROM ForEthnicPivot PIVOT (SUM(countID) FOR Team IN (' + @Teams + ')) AS X' )
end
************
I can call the function:
exec EthnicityPivot '01/01/2007','09/09/2007'
and it works fine in SQL analyzer, but when I want to use it in Visual Studio in a new report I am getting this error
message:
There is an error in the query. Invalid length parameter passed to the SUBSTRING function. Incorrect syntax near ')'.
Anyone had similar error and sorted it?
Cheers
Polda
View 4 Replies
View Related
May 28, 2015
I have a procedure that calls a SVF to convert an xmldocument. The ultimate purpose is to update the xml in a column in a multi-million row table. The xml is stored as varchar(MAX), it was supposed to carry any type of text, initially at least.
My question is: why is the xml-parsing performed inside the function much slower when i pass the xmldocument as type xml than when it is passed as varchar(MAX) and the CAST to xml is within the function? Does processing the xml input parameter in SlowFunction involve expensive crossing of some context border?
The two versions of the SVF (they return the rowcount in this simplified example):
CREATE FUNCTION [dbo].[FastFunction]
(
@inDetaljerText varchar(MAX)
)
RETURNS int
[Code] ....
The two versions of the SP
CREATE PROCEDURE [dbo].[FastProcedure]
AS
BEGIN
SET NOCOUNT ON;
select
dbo.FastFunction(al.Detaljer)
[Code] ....
View 2 Replies
View Related
Oct 9, 2006
Hi,
I am new at sql 2000 and 2005, I have created a package in 2005 which I am trying to execute on a daily bases by creating a job. At first because of security issues the job would not execute. Hence, I had to create a credential and a proxy to run the job with sa account. Now it is giving me this error,
€œSQLServer Error: 536, Invalid length parameter passed to the SUBSTRING function. €œ
Through research I have no clue as what I need to do, or where to look.
The package runs without error when I execute the package itself.
Any help is greatly appreciated.
Thanks,
Lori
View 1 Replies
View Related
