I am trying to store the server name from a query into a variable or table.
Declare @ServerName Varchar(30)=cast(@@SERVERNAME as varchar(30))
Print @servername
It keeps returning null.
I am trying to use a stored procedure to update a column in a sql table using the value from a variable table I getting errors because my syntax is not correct. I think table aliases are not allowed in UPDATE statements.
This is my statement:
UPDATE [dbo].[sessions_teams] stc
SET stc.[Talks] = fmt.found_talks_type
FROM @Find_Missing_Talks fmt
WHERE stc.sessionid IN (SELECT sessionid FROM @Find_Missing_Talks)
AND stc.coupleid IN (SELECT coupleid FROM @Find_Missing_Talks)
How to use table variable in SSIS 2012, is it possible to use table variable in SSIS.
I want to insert some results from EXECUTE SQL TASK to this table variable and use this variable in OLEDB SOURCE task in data flow where it is used in SQL query with IN Operation.
The table variable contain multiple values like '100','234','XYZ' Is it possible to do or is there any other solution to achieve this?
I want to update one table with the value from variable using a set based approach.
so the line
>> select @List = coalesce(@list + ',','') + cast(id as varchar(10)) + cast(feetype as varchar(25))
works fine but I want to take @list and use it to update my customers table. here is the full code.
create table customers
(custid int, fee_history varchar(max))
insert into customers
(custid
, fee_history
[code]....
I am writing a query to update table variable. It is throwing me some error.
I have a table variable declared and inserted the data with three columns. I want to update col1 of that table variable when the second column of that table variable= one column from a physical table
update @MYtabvar set @Mytabvar.LatestDate=B.LatestDate from TableB B where @Mytabvar.id=B.ID
I have started working with dynamic queries recently. I am using a table variable and need to add a join in query dynamically.
For Eg- @TableVariable
SET @query_from = @query_from + CHAR(10) + ' JOIN @TableVariable on ABC.ID = @TableVariable.ID '
BUt it gives an error that @TableVariable must be declared
What is the purpose of creating table variable and inserting data into it and selecting from table variable inside of stored proc?
Why can't the stored proc just have select statement instead of creating table variable?
I have created procedure that creates a temptable with the users from a certain business unit.
I need to save the output from the username field to my variable @TheUsers as I will be using this variable in ssrs.
CREATE TABLE #TEMP_TABLE
(
useriduniqueidentifier,
usernamevarchar(200),
unitiduniqueidentifier,
unitnamevarchar(200)
[Code] ....
how do I get the variables in the cursor, set statement, to NOT update the temp table with the value of the variable ? I want it to pull a date, not the column name stored in the variable...
create table #temptable (columname varchar(150), columnheader varchar(150), earliestdate varchar(120), mostrecentdate varchar(120))
insert into #temptable
SELECT ColumnName, headername, '', '' FROM eddsdbo.[ArtifactViewField] WHERE ItemListType = 'DateTime' AND ArtifactTypeID = 10
--column name
declare @cname varchar(30)
[code]...
I am having a hard time getting a variable recognized in a function. The variable is not being seen properly in the charindex function.
@ExtType contains = X
@PhoneNo contains = +1 (202) 123-9876 X012
select @intPos = charindex(@ExtType,Upper(@PhoneNo))
I have created a variable in a SQL Task and assigned it to a string variable. When I debug the container with a breakpoint, I can see the correct date value being assigned to the variable.
I have an ADO Net source setup to an Oracle connection. I need to pull the Oracle data down that has an updated date greater than the updated date in my ODS.
My issue is that the variable is not being passed through to my expression that I use for an ADO Net source.
"SELECT * FROM BI_EDW.GL_JE_HEADERS WHERE LAST_UPDATE_DATE > To_Date('" + (DT_WSTR, 19) @[User::varLastUpdateDate] + "','yyyy-mm-dd hh24:mi:ss')"
I wish my transform variable, so that adding the OR operator, and the words within the quotes are not to put the OR.
ALTER PROCEDURE
@Product = ' 'ORANGE LEMON' BANANA APPLE 'PEACH PEAR' '
AS
-- I WANT TRANSFORM THE WORDS
@PRODUCT = 'ORANGE LEMON' OR BANANA OR APPLE 'PEACH PEAR'
SELECT Description
FROM Production.ProductDescription
WHERE CONTAINS(Description, @PRODUCT)
GO
I am trying to add a where condition on an ID column(type - INT) with values coming from a variable (type - STRING). i am using cast to cast the ID as Varchar and then apply the condition, but i am not getting any results back. following is an example of what i am trying to do.using temp table in the example , so you can copy the t-sql and run as is.
CREATE TABLE #TABLE1(ID INT)
INSERT INTO #TABLE1 VALUES (1), (2) , (3) , (4)
DECLARE @ID varchar(8000) = '2,4'
[code]....
I need to use Bulk insert statement for copying a table with 200 million rows to another table on the same server...the table has no primary key or identity column.... script for BULK INSERT ...
View 9 Replies View RelatedI want to loop through rows and append values to a declared variable. The example below returns nothing from Print @output, it's as if my @output variable is being reset on every iteration.
declare @i int,@output varchar(max)
set @i = 1
while @i < 10
begin
set @output = @output + convert(varchar(max),@i) + ','
print @output
set @i = @i +1
end
The following works in query if I specify one student (PlanDetailUID) when running query. If I try to specify multiple students (PlanDetailUID) when running query, I get variable cannot take multiple entries. I assume I would need to replace (variables) in PART 2 with (case statements / using select everywhere) to get around the issue or is there a better way ?
CREATE TABLE #AWP (
[TransDate] [datetime] NULL,
[Description] [varchar](1000) NULL,
[Amount] [float] NULL,
[TotalDueNow] [float] NULL,
[code]....
I am writing a stored procedure and have a query where I create a variable from other table
Declare @Sem varchar (12) Null
@Decision varchar(1) Null
Select emplid,name, Semester
Decision1=(select * from tbldecision where reader=1)
Decision2=(select * from tbldecision where reader=2)
Where Semester=@Sem
And Decision1=@Decision
But I am getting error for Decision1 , Decision2. How can I do that.
I have created stored procedure to find out first word of the keyword. I am getting error below on execution:
"Must declare the scalar variable "@SubjectBeginning"."
I am facing a strange problem in executing stored procedure. Basically my sproc will take a values from Java application and create a Insert statement. see stored procedure below.Just to give some more background- I am re writing the procedure which was written in oracle already.
Problem I am facing now is with the statement below . When I execute the procedure for first time it works fine however when I execute for second time onwards it is setting to empty. Not sure what is the problem with my declaration and setting up with values. For reference I have pasted my complete stored procedure code below.
select @L_STMT= 'INSERT INTO '+ @l_table_name + '(' + LTRIM(RTRIM((substring (@L_INS_STMT,2,len(@L_INS_STMT))))) + ') VALUES (' + LTRIM(RTRIM((substring (@L_INS_STMT1,2,len(@L_INS_STMT1))))) +')';
ALTER PROCEDURE [dbo].[PKG_OBJ_API$CREATE_OBJ]
(
@P_TYPE VARCHAR(4000),
@P_SCOPE VARCHAR(4000),
@Arrlist varchar(max),
[code]....
create a table using the value of a variable
example:
create uspCreateTable
@ NameTable varchar (10)
the
begin
create table @ NameTable (
id int,
Name varchar (20))
end
the intention is to create a procedure that creates tables changing only the name.
I wonder if it possible to move data from tables on a linked server to a "normal database"?
Name linked server: Covas
Name table on linked server: tblCountries
Name field: cntCountryName
Name "normal" database: CovasCopy
Name "normal" table: Countries (or dbo.Countries)
Name "normal" field: Country
This is just a test setup. I figure that if I get this working the rest will be easier.
My current query:
select * from openquery(COVAS,'
INSERT INTO CovasCopy.dbo.Countries(Country)
SELECT cntCountryName FROM db_covas.tblCountries;')
I want Compare two Table data and insert changed field to the third table ...
View 9 Replies View Relatedi am inserting something into the temp table even without creating it before. But this does not give any compilation error. Only when I want to execute the stored procedure I get the error message that there is an invalid temp table. Should this not result in a compilation error rather during the execution time.?
--create the procedure and insert into the temp table without creating it.
--no compilation error.
CREATE PROC testTemp
AS
BEGIN
INSERT INTO #tmp(dt)
SELECT GETDATE()
END
only on calling the proc does this give an execution error
What is the best way to transfer data from the staging table into the main table.
Example:
Staging Table Name: TableA_satge (# of rows - millions)
Main Table Name: TableA_main (# of rows - billions)
Note: Staging table may have some data same as the main table.
Currently I am doing:
- Load data into staging table (TableA_stage)
- Remove any duplication of rows from the staging table (TableA_stage)
- Disable all indexes on main table (TableA_main)
- Insert into main table (TableA_main) from staging table (TableA_stage)
- Remove any duplication of rows from the main table using CTE (TableA_main)
- Rebuild indexes on main_table (TableA_main)
The problem with the above method is that, it takes a lot of time and log file size grows very big.
I have table 'stores' that has 3 columns (storeid, article, doc), I have a second table 'allstores' that has 3 columns(storeid(always 'ALL'), article, doc). The stores table's storeid column will have a stores id, then will have multiple articles, and docs. The 'allstores' table will have 'all' in the store for every article and doc combination. This table is like the master lookup table for all possible article and doc combinations. The 'stores' table will have the actual article and doc per storeid.
What I am wanting to pull is all article, doc combinations that exist in the 'allstores' table, but do not exist in the 'stores' table, per storeid. So if the article/doc combination exists in the 'allstores' table and in the 'stores' table for storeid of 50 does not use that combination, but store 51 does, I want the output of storeid 50, and what combination does not exist for that storeid. I will try this example:
'allstores' 'Stores'
storeid doc article storeid doc article
ALL 0010 001 101 0010 001
ALL 0010 002 101 0010 002
ALL 0011 001 102 0011 002
ALL 0011 002
So I want the query to pull the one from 'allstores' that does not exist in 'stores' which in this case would the 3rd record "ALL 0011 001".
I'm using SS 2012.
I started with an inline table returning function with a hard coded input table name. This works fine, but my boss wants me to generalize the function, to give it in input table parameter. That's where I'm running into problems.
In one forum, someone suggested that an input parameter for a table is possible in 2012, and the example I saw used "sysname" as the parameter type. It didn't like that. I tried "table" for the parameter type. It didn't like that.
The other suggestion was to use dynamic sql, which I assume means I can no longer use an inline function.
This means switching to the multi-line function, which I will if I have to, but those are more tedious.
Any syntax for using the inline function to accomplish this, or am I stuck with multi-line?
A simple example of what I'm trying to do is below:
Create FUNCTION [CSH388102].[fnTest]
(
-- Add the parameters for the function here
@Source_Tbl sysname
)
RETURNS TABLE
AS
RETURN
(
select @Source_Tbl.yr from @Source_Tbl
)
Error I get is:
Msg 1087, Level 16, State 1, Procedure fnTest, Line 12
Must declare the table variable "@Source_Tbl".
If I use "table" as the parameter type, it gives me:
Msg 156, Level 15, State 1, Procedure fnTest, Line 4
Incorrect syntax near the keyword 'table'.
Msg 137, Level 15, State 2, Procedure fnTest, Line 12
Must declare the scalar variable "@Source_Tbl".
The input table can have several thousand rows.
I just created a new table with over 100 Columns and I need to populated just the first 2 columns.
The first columns to populate is an identify column that is the primary key. The second column is a foreign_key to an other column and I am trying to populate this columns with all the values from the foreign_key value. This is what I am trying to do.
column1 = ID
column2= P_CLIENT_D
SET IDENTITY_INSERT PIM1 ON
INSERT INTO PIM1 (P_CLIENT_ID)
SELECT
Client.ID
FROMP_Client
So I am trying to insert both an identity values and a value from an other table while leaving the other columns blank. How do I go about doing this.
Why the Indexes on table slow down the DML operation on table, what is the exact reason?
View 5 Replies View RelatedI have a function that returns a table from a comma-delimited string.
I want to take this a step further and create a function that will return a set of tablenames in a table based on a 'group' parameter which is a simple integer...1->9, etc.Obviously, what I am doing is not working out.
CREATE FUNCTION dbo.fnReturnTablesForGroup
(
@whichgroup int
)
RETURNS @RETTAB TABLE (
TABLENAME VARCHAR(50)
[code]....
I'm trying to create a simple function that will do a count on a table. I want to pass the table name in form of a parameter to the variable and this function will return the count as an int. See my function below...
CREATE FUNCTION count_rows (@tablename varchar(100)
RETURNS int AS
BEGIN
DECLARE @emp_count AS int
declare @declaration varchar(100)
[Code] ....
The errors I am getting are as follows:
Msg 102, Level 15, State 1, Procedure count_rows, Line 3
Incorrect syntax near 'RETURNS'.
Msg 102, Level 15, State 1, Procedure count_rows, Line 10
Incorrect syntax near '@declaration'.
Msg 178, Level 15, State 1, Procedure count_rows, Line 14
A RETURN statement with a return value cannot be used in this context.
I can create a temp table like this, and immediately read the data:
declare @NAICSGroups table (NAICS2DigitCode int, NAICSShortTitle varchar(35));
insert into @NAICSGroups (NAICS2DigitCode, NAICSShortTitle)
values
(11,'Agriculture'),
(21,'Mining'),
(22,'Utilities'),
[Code] .....
is there a way to see the data of a table variable in the SSMS debugger? For example, if I set a breakpoint in SSMS and look at a populated table variable named @MyTable in the Locals tab at the bottom of the IDE, a value of "(table)" is displayed. There does not appear to be a way to expand or drill into this variable in the debugger to see the data. Do you know if there's a way to do this through the debugger or do you use an alternate approach when using the SSMS debugger?
View 1 Replies View RelatedI have a 2010 SSIS package where I am reading csv files with different fields and formatted data, I have created separate packages for each file and I am formatting the data to fit the final destination tables data elements, I've been instructed to create 7 separate packages to read each file and the format the data from the 7 csv files, and insert into their table tbl1, tbl2, tbl3...etc then, I'm taking a execute sql task and wanting to insert the tbl1, tbl2, tbl3...etc into destination table that will be the final table for all reports and other uses.
1- should I create a ID?
2- these files will be read once a month
3- I want to append the data, not drop and recreate each run,
4- It's 2012 SQL and 2010 SSIS
Each csv file is in a different format, some have 15 columns, other have 8 I have to parse the data, in SP to align with the fields in the destination table.
5- Can I force RowID to be the next auto gen number from tbl1,for the start of insert for tbl2, then last row of tbl2 for insert of tbl3???