SQL Server 2012 :: How To Append Go Clause To 10k Lines Of Code
Dec 28, 2014
I have 10k indexes I need to rebuild and each time the script reaches an error it stops all further activity. How can I append 'GO' to the end of each line so it will continue on error messages?
Once I have the syntax I can do a find and replace function in Notepad++
USE [AdventureWorks2014] + char(13) + char(10) + GO
ALTER INDEX [IX_Person] ON [Person].[Person] REBUILD PARTITION = ALL WITH (PAD_INDEX = OFF) + char(13) + char(10) + GO
ALTER INDEX [IX_Emp] ON [HumanResources].[Employee] REBUILD PARTITION = ALL WITH (PAD_INDEX = OFF) + char(13) + char(10) + GO
************** Truncate ***********
View 3 Replies
ADVERTISEMENT
Feb 24, 2008
Hello,
I'm using ASP.Net to update a table which include a lot of fields may be around 30 fields, I used stored procedure to update these fields. Unfortunatily I had to use a FormView to handle some TextBoxes and RadioButtonLists which are about 30 web controls.
I 've built and tested my stored procedure, and it worked successfully thru the SQL Builder.The problem I faced that I have to define the variable in the stored procedure and define it again the code behind againALTER PROCEDURE dbo.UpdateItems
(
@eName nvarchar, @ePRN nvarchar, @cID nvarchar, @eCC nvarchar,@sDate nvarchar,@eLOC nvarchar, @eTEL nvarchar, @ePhone nvarchar,
@eMobile nvarchar, @q1 bit, @inMDDmn nvarchar, @inMDDyr nvarchar, @inMDDRetIns nvarchar,
@outMDDmn nvarchar, @outMDDyr nvarchar, @outMDDRetIns nvarchar, @insNo nvarchar,@q2 bit, @qper2 nvarchar, @qplc2 nvarchar, @q3 bit, @qper3 nvarchar, @qplc3 nvarchar,
@q4 bit, @qper4 nvarchar, @pic1 nvarchar, @pic2 nvarchar, @pic3 nvarchar, @esigdt nvarchar, @CCHName nvarchar, @CCHTitle nvarchar, @CCHsigdt nvarchar, @username nvarchar,
@levent nvarchar, @eventdate nvarchar, @eventtime nvarchar
)
AS
UPDATE iTrnsSET eName = @eName, cID = @cID, eCC = @eCC, sDate = @sDate, eLOC = @eLOC, eTel = @eTEL, ePhone = @ePhone, eMobile = @eMobile,
q1 = @q1, inMDDmn = @inMDDmn, inMDDyr = @inMDDyr, inMDDRetIns = @inMDDRetIns, outMDDmn = @outMDDmn,
outMDDyr = @outMDDyr, outMDDRetIns = @outMDDRetIns, insNo = @insNo, q2 = @q2, qper2 = @qper2, qplc2 = @qplc2, q3 = @q3, qper3 = @qper3,
qplc3 = @qplc3, q4 = @q4, qper4 = @qper4, pic1 = @pic1, pic2 = @pic2, pic3 = @pic3, esigdt = @esigdt, CCHName = @CCHName,
CCHTitle = @CCHTitle, CCHsigdt = @CCHsigdt, username = @username, levent = @levent, eventdate = @eventdate, eventtime = @eventtime
WHERE (ePRN = @ePRN)
and the code behind which i have to write will be something like thiscmd.CommandType = CommandType.StoredProcedure;
cmd.Parameters.AddWithValue("@eName", ((TextBox)FormView1.FindControl("TextBox1")).Text);cmd.Parameters.AddWithValue("@ePRN", ((TextBox)FormView1.FindControl("TextBox2")).Text);
cmd.Parameters.AddWithValue("@cID", ((TextBox)FormView1.FindControl("TextBox3")).Text);cmd.Parameters.AddWithValue("@eCC", ((TextBox)FormView1.FindControl("TextBox4")).Text);
((TextBox)FormView1.FindControl("TextBox7")).Text = ((TextBox)FormView1.FindControl("TextBox7")).Text + ((TextBox)FormView1.FindControl("TextBox6")).Text + ((TextBox)FormView1.FindControl("TextBox5")).Text;cmd.Parameters.AddWithValue("@sDate", ((TextBox)FormView1.FindControl("TextBox7")).Text);
cmd.Parameters.AddWithValue("@eLOC", ((TextBox)FormView1.FindControl("TextBox8")).Text);cmd.Parameters.AddWithValue("@eTel", ((TextBox)FormView1.FindControl("TextBox9")).Text);
cmd.Parameters.AddWithValue("@ePhone", ((TextBox)FormView1.FindControl("TextBox10")).Text);
cmd.Parameters.AddWithValue("@eMobile", ((TextBox)FormView1.FindControl("TextBox11")).Text);
So is there any way to do it better than this way ??
Thank you
View 2 Replies
View Related
Oct 7, 2014
I have a report that includes line charts. Some of the charts only show a very little of the line. I have checked the dataset and the data is there. What could be causing this problem? I have included the code below.
/code = "sql"
<?xml version="1.0" encoding="utf-8"?>
<Report xmlns="http://schemas.microsoft.com/sqlserver/reporting/2008/01/reportdefinition" xmlns:rd="http://schemas.microsoft.com/SQLServer/reporting/reportdesigner">
<Body>
[Code] ....
View 9 Replies
View Related
Aug 20, 2015
I am creating a report query that returns all unreconciled P/O lines. I am near completion but I am unable to find a way to remove the reconciled records.
I have included a script to produce some sample table, data & query.
The recordset dispalys 6 rows. All reconciled Supplier Invoices are duplicated and have transaction codes 40, 50 and reconcile code of 9 (5024, 921689471).
All unreconciled only appear once and have transaction codes 40 and reconcile code of 0 (4835 & 921978016). These are the only records that I want to show.
CREATE TABLE [dbo].[Purch_Ledger](
[EPDIVI] [nvarchar](3) NULL,
[EPSUNO] [nvarchar](10) NULL,
[EPSINO] [nvarchar](24) NULL,
[EPDUDT] [numeric](8, 0) NULL,
[EPTRCD] [numeric](2, 0) NULL,
[code].....
Whatever I try I cant find a way to get rid of the unwanted records.
View 3 Replies
View Related
Oct 8, 2014
I have a table that looks like below.
DECLARE @Tree TABLE
(
NAME VARCHAR(100),
[LEVEL] INT
)
INSERT INTO @Tree
SELECT 'ABCD', 1
UNION
SELECT 'ABBBCDD', 2
UNION
SELECT 'AABBCCDD', 2
UNION
SELECT 'AAAABBBBCCCCDDDD', 3
My question is based on the Level, I want to append that many _(underscores) before the name.
Eg : for level 3 I want the name as ___AAAABBBBCCCCDDDD.
I was thinking to insert this into a temp table and call a while statement based on the number.
View 2 Replies
View Related
Jun 17, 2015
I have SQL statement like this ..
CREATE PROCEDURE [dbo].[GetProspectBySearch]
@StartRowIndex AS INT,
@MaximumRows AS INT,
@ModuleType AS VARCHAR(50) = NULL,
@ProspectCategory AS VARCHAR(50) = NULL,
@ProspectsWithoutContact AS BIT = NULL
AS
BEGIN
IF @Status = 'All'
BEGIN
SET @Status = NULL
END
[code]....
1) How do I can write count and paging statements in to single statement ?
2) There is parameter @ProspectsWithoutContact is using for differentiation for count and paging statements. If @ProspectsWithoutContact is "1" then this clause ( AND ContactPerson = NULL AND TelNo = NULL AND FaxNo = NULL) will be added in to both count and paging statements. How do I can write this in to single statement with out IF ELSE ?
write normal SQL with out dynamic SQL ?
View 3 Replies
View Related
Apr 3, 2014
I want to loop through rows and append values to a declared variable. The example below returns nothing from Print @output, it's as if my @output variable is being reset on every iteration.
declare @i int,@output varchar(max)
set @i = 1
while @i < 10
begin
set @output = @output + convert(varchar(max),@i) + ','
print @output
set @i = @i +1
end
View 6 Replies
View Related
Mar 22, 2007
I am trying to sort out the member "Adams" from the committee members, and sum up the total amounts that were donated while he was the committee member.
The Table:
CREATE TABLE contribution_list
(contrib_date DATE NOT NULL,
donor_name VARCHAR(30) NOT NULL,
amount NUMBER(8,2),
program VARCHAR2(30),
committee_member VARCHAR2(20) NOT NULL,
PRIMARY KEY (contrib_date,donor_name,committee_member));
The Code that is giving me errors:(not a group by expression):
CREATE or REPLACE VIEW adams_conrtibution_total as
select program, committee_member, sum(amount)
from contribution_list
where committee_member = 'Adams'
group by program;
View 1 Replies
View Related
May 22, 2007
Does anyone know if there is a limit on characters or lines of code that can be used to create your dataset?
I cut and pasted some sql code of a report in there and it's cutting off the last 100 lines or so.
View 1 Replies
View Related
Sep 8, 2005
First and foremost, thanks for reading and responding!Does it matter how big a stored procedure is if you do things in the stored procedure such as:declare the parametersIF @Parm_Select = '<ALL>'do a select IF @Parm_Select <> '<ALL> and @Parm_Report = '1'do a selectIF @Parm_Select <> '<ALL> and @Parm_Report = '2'do select This goes on and on and on and I have written a couple of stored procedures that are about 1500 lines of code based upon parameters passed I do not create any tables - they are just all select statements based upon the parameters passed.I thought I was doing the right thing cause I did not want to have to write a procedure that called a procedure, (I read this and got confused on the return prarmeters cause there is a lot of data being returned from the select ----- I don't think I said that correctly! . I am just learning this SQL stuff and I it is cool and I am excited - but I don't want to develop any bad habits in the beginning - and I try to look these things up on the www - but I just don't get explicit answers from reading all of this stuff. Thank to all in advance!
View 1 Replies
View Related
Nov 3, 2015
How to encrypt the java application code using the 'with encryption' clause from sql server stored procedure or function.
View 3 Replies
View Related
Feb 4, 2014
From MS Dynamics NAV 2013 I get a lot of querries that have a where clause like this:
where [Field1] like @p1 and [Field1] < @p2.
Field1 is the only primary key field and clustered index. The query also has a TOP 50 clause.
@p1 is always a "Starts-With"-value (something like N'abc%').
The query plan uses a clustered index seek but the number of reads look more like a clustered index scan.
Depending on the table size I see 1M or more reads for these querries.
If I rebuild the query in SSMS, but replace the paramerters with actual values I only see a few reads.
I was able to reproduce the issue with a temp table. See code below.
Is there a way to make SQL Server use another strategy when using the parameterized query?
SQL Server Version is 11.0.3401.
if object_id('tempdb..#tbl') is not null
drop table #tbl;
create table #tbl
(
[No] nvarchar(20)
,[Description1] nvarchar(250)
[Code] ....
View 9 Replies
View Related
May 16, 2014
Right now I have to do something like this and it is time consuming every time I have to query a specific table...
SELECT lots_of_columns
FROM table
WHERE (column5 = '1' OR column6 = '1' OR column7 = '1' OR column8 = '1' OR column9 = '1' OR column10 = '1' OR column11 = '1' OR column12 = '1')
AND other_query_critiera_here
Typing out the OR statement gets long, time consuming and prone to errors because that first where line with all the ORs can sometimes have 20+ ORs in it. As some insight, the columns are text columns, sometimes they have data, sometimes they are NULL. Sometimes they have the same data (i.e., column5 and column6 and column12 could both have '1' as values).
View 4 Replies
View Related
May 5, 2015
I found a code snippet that use the curious following sintax on the creation of View:
CREATE VIEW [dbo].[vw_EvenValues]
AS
SELECT [TestColumn]
FROM [dbo].[TestTable]
WHERE [TestColumn] % 2 = 1
[code]....
IF [TestColumn] on the Select is varchar, then error occurs and say:"Conversion failed when converting for the varchar value 'A001' to data type int"
View 7 Replies
View Related
May 8, 2015
I would like to be able to combine the functionality of IN and LIKE in a WHERE clause. Although the simple AdventureWorks2012 example below illustrates the concept with 3 search criteria, the real-world example I need to apply the concept to has a couple dozen. This returns 50 rows, but requires multiple OR ... LIKE functions:
SELECT DISTINCT c.Name
FROM Sales.Store c
WHERE c.Name LIKE '% sports %'
OR c.Name LIKE '% exercise %'
OR c.Name LIKE '%toy%'
What I would like to do is something like this, which doesn't work:
SELECT DISTINCT c.Name
FROM Sales.Store c
WHERE c.Name IN(LIKE '% sports %', LIKE '% exercise %', LIKE '%toy%')
I could load up a cursor and loop through it, but the syntax is more cumbersome than the multiple LIKE statements, not to mention most SQL programmers are horrified at the mention of the abominable word 'cursor' for performance reasons.
View 7 Replies
View Related
May 28, 2015
A while back, a "quirky update" method was proposed for lightning fast running totals based on the three-part MSSQL UPDATE's SET statement and tally tables. However, some claimed this was not 100% absolutely guaranteed behavior.
How does the new OVER clause compare in terms of performance ?
DECLARE @Tbl TABLE
(
pk int not null primary key identity,
N int
)
INSERT INTO @Tbl (N) SELECT TOP 1000 1 FROM syscolumns a CROSS JOIN syscolumns b
SELECT pk, SUM(pk) OVER (ORDER BY pk )
FROM @Tbl
View 9 Replies
View Related
Jul 2, 2015
I am creating a dynamic query where i am appending a where clause something like -
IF (@CurCaptureDate IS NOT NULL)
SET @where_clause = @where_clause + CHAR(10) + 'AND CD.CaptureDate = ' + @CurCaptureDate
PS - CD.CaptureDate is datetime and @CurCaptureDate is also datetime
but when executing , it gives this error - Msg 241, Level 16, State 1, Line 169 Conversion failed when converting date and/or time from character string.
i am not able to use convert here with these quotes.
i tried this - SET @where_clause = @where_clause + CHAR(10) + 'AND CD.CaptureDate = ' + CONVERT(VARCHAR(25),@CurCaptureDate )
but it makes it to -
AND CD.CaptureDate = Jul 19 2014 12:00AM. I would need the date in quotes.
View 4 Replies
View Related
Sep 11, 2015
Because of the way in which a specific piece of code is written, I'm bound into using a WHERE clause for a report generation.Each Inspection generates a unique Inspection Number. Any re-inspection created from that inspection is assigned that Inspection Number and appended with ".A", ".B", ".C" and so on.
The problem is this: Each row's Primary Key is the "InspectionId" in "dbo.v_InspectionDetailsReports". I need to return not only the data related to that particular InspectionId, but also the data related to any previous related inspection. For example, if I have a main number of CCS-2012 and three re-inspections, CCS-2012.A, CCS-2012.B and CCS-2012.C, and I report on CCS-2012.B, I need all the data for CCS-2012, CCS-2012.A and CCS-2012.B but NOT CCS-2012.C.
I would prefer to not have to do everything in a WHERE statement, but my hands are a bit tied.
The "SELECT * FROM dbo.v_InspectionDetailsReports WHERE . . ." is already hardcoded (don't ask).
SELECT *
FROM dbo.v_InspectionDetailsReports
WHERE ( RefOnly = 0
OR RefOnly IS NULL
[code]...
View 5 Replies
View Related
Sep 29, 2015
I am using an aggregate with the OVER clause.Running the script is fast less than 1 second but when I say insert into a temp table the execution plan is very different at it take 8 seconds.I have attached the execution plans. Also the Statistics IO, Time messages. I am using SQL Server 2014 with backward compatibility to 2008 R2.
if (select OBJECT_ID('tempdb..#MM')) is not null drop table #MM
CREATE TABLE #MM ([MyTableID] [int], [ParticipantID] [int], [ConferenceID] [nvarchar](50), [Points] [money], [DateCreated] [datetime], [StartPoints] [money], [EndPoints] [money], [LowPoints] [money], [HighPoints] [money])
insert into #MM ([MyTableID], [ParticipantID], [ConferenceID], [Points], [DateCreated], [StartPoints], [EndPoints], [LowPoints], [HighPoints])
selectmm.MyTableID, mm.ParticipantID, mm.ConferenceID, mm.Points, mm.DateCreated,
[code]....
View 2 Replies
View Related
Nov 6, 2014
I'm looking at various methods for deleting duplicate rows. Among the alternatives, one works just fine but gives me results that make me go?.
Consider this script:
declare @t table (a int, b int, c int, d int, e int)
insert into @t (a, b, c, d, e) values
(1, 2, 3, 4, 5),
(3, 4, 2, 3, 4),
(1, 2, 3, 4, 5)
select a,b,c,d,e, rn = row_number() over (
partition by a,b,c,d,e
[Code] ....
The code works -- that is, the duplicate row is deleted. However the output clause returns:
abcdern
123451
So....why? Why does the output clause show that the row with rn=1 was deleted, when the where clause stipulates rn > 1?
View 9 Replies
View Related
Aug 21, 2014
How I am using a CASE statement within a WHERE clause to filter data:
CREATE PROCEDURE dbo.GetSomeStuff
@filter1 varchar(100) = '',
@filter2 varchar(100) = ''
AS
BEGIN
SELECT
[Code] .
What I want, is to be able to pass in a single value to filter the table, or if I pass in (at the moment a blank) for no filter to be applied to the table.
Is this a good way to accomplish that, or is there a better way? Also, down the line I'm probably going to want to have multiple filter items for a single filter, what would be the best way to implement that?
View 5 Replies
View Related
Jun 4, 2015
the code below works (this is only a quick dumbed down version of the actual code, it might not work 100% for all cases). Is it at all possible to exploit the functions that were added to SSQL since v. 2005 to simplify this code ?
In SSRS, a parameter allows the user to create a list of invoices (from CRM) to be ordered in any of the following ways the user prefers:
'Document Date (most recent date first)'
'Document Number (highest number first)'
'Document Date (most recent first) and Number'
'Document Number (lowest number first)'
The invoices have a (supposedly) sequential identity-generated number. However Accounting may want to set a different date than the creation date on some invoices. So there is no way the invoice numbers will be in the same sequence as the invoice dates.
So I just created the "sorting fields" - they appear as junk in the output dataset (just do not drop them in the SSRS tablix - they have to be part of the SELECT statement to be usable in the ORDER BY clause.
The code is:
DECLARE @ls_OrderBy varchar(80)
--'Document Number (highest number first)'
--'Customer and Document Date (most recent date first)'
--'Customer and Document Number (highest number first)'
--'Document Date (most recent first) and Number'
[code]....
View 9 Replies
View Related
Jun 8, 2015
I have a two tables each having a uniqueidentifier column person_id
I am trying to a select statement where I want a list of the person_id's in one table that are not in another table.
-- insert into wch_needed those who need checked
insert into #wch_needed (person_id, rendered_by )
select distinct e.person_id, e.rendered_by
from #wch_who o, encounter e
where o.person_id not in (select distinct person_id from #wch_have )
and o.person_id = e.person_id
the where conditional
where o.person_id not in (select distinct person_id from #wch_have )
does not work.
How can I do this?
View 4 Replies
View Related
Feb 19, 2014
I'm trying to write a query to select various columns from 3 tables. In the where clause I use a set of conditions, but most important condition is that I only want to see all results from the different columns where the ph.ProdHeaderDossierCode contains at least 25 lines of processed hours. I tried this with group by and having, but I constant get error messages on all other columns that I want to see: "is invalid in the select list because it is not contained in either an aggregate function or the GROUP BY clause". How can I make this so I can see all information I need?
Here is my code so far:
selectph.CalculatedTotalTime,
ph.ProdHeaderDossierCode,
ph.MachGrpCode,
ph.EmpId,
pd.PartCode
fromdbo.T_ProcessedHour ph,
[Code] ....
View 8 Replies
View Related
Jul 27, 2014
I want to create the following scenario. I have a table that stores employees working on projects and their project hours by week, but now I also need a running total per week for each of those projects. For example take a look below:
EmployeeID, Project, Sunday, Monday, Tuesday,....Saturday, ProjectHours, TotalProjectHoursPerWeek(this is the column I am trying to derive), FiscalWeek
101, ProjectABC, 5,5,5,...5, 20, 40,25
102, ProjectXYZ 4,4,4,....4, 20 ,40,25
103,ProjectQWE, 2,2,2,...2, 8, 32,26
104, ProjectPOP, 6,6,6,...6, 24, 32,26
What I have tried so far:
Correlated Subquery:
SELECT EmployeeID,Project, Sunday, Monday,....Saturday, ProjectHours, SELECT(SUM(ProjectHours) FROM dbo.TableABC ap GROUP BY FiscalWeek),
FROM
dbo.TableABC a
I got this to work one time before, but now I am getting the following error:
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
View 2 Replies
View Related
Oct 11, 2014
I can't understand why I get 2 different results on running with a Bracket I get 'NULL' and without a bracket I get the declared variable value which is 'Noname'
Below is Query 1:
Declare @testvar char(20)
Set @testvar = 'noname'
Select @testvar= pub_name
FROM publishers
WHERE pub_id= '999'
Select @testvar
Out put of this query is 'Noname'
BUT when I type the same query in the following manner I get Null-------Please note that the only difference between this query below is I used brackets and Select in the Select@testvar statement
Declare @testvar char(20)
Set @testvar = 'noname'
Select @testvar=(Select pub_name
FROM publishers
WHERE pub_id= '999')
Select @testvar
View 4 Replies
View Related
Jul 31, 2015
I wrote code to archive Data.I created a table that set the maximum number of records to archive and delete and loop until finished or a set a flag in a table to stop archiving. I was able to limit the number of records to commit.
View 9 Replies
View Related
Sep 9, 2014
I am writing a stored procedure and have a query where I create a variable from other table
Declare @Sem varchar (12) Null
@Decision varchar(1) Null
Select emplid,name, Semester
Decision1=(select * from tbldecision where reader=1)
Decision2=(select * from tbldecision where reader=2)
Where Semester=@Sem
And Decision1=@Decision
But I am getting error for Decision1 , Decision2. How can I do that.
View 6 Replies
View Related
Jun 4, 2015
I Want to monitor Replication count of object (Table )if it is not equal to Publication (Table ) and subscriber (Table ), It have to send mail with count difference.
View 9 Replies
View Related
Sep 8, 2015
I am querying with a SELECT statement against an address table that has a post code column with corrupt data.
Sample record:- Northants NN4 0NB
Should be NN4 0NB
I have used the following on another column:-
LEFT(A.Addr1,CASE WHEN CHARINDEX ('(', A.Addr1) =0 THEN LEN(A.Addr1) ELSE CHARINDEX('(' ,A.Addr1) -1 END) AS 'Address 1'
but unable to correct this problem?
View 9 Replies
View Related
Sep 14, 2015
Any better way to query SQL 2012 to display the code of a stored proc to a single line. I'm trying to write a script to insert the contents of the procs between my devestprod environments. So people can query a single table for any proc that is different between environments. At the moment I am using the syscomments view and the text column but the problem here is if you get a lengthy proc it cuts it up into multiple rows.
I can get around it by converting the text to a varchar(max) and outer joining the query, but as you can see by my code below I have to try and guess what the maximum number of rows I'm going to get back for my largest proc. If someone adds a new one that returns 8 rows I'm going to miss it with this query.
Select col1.[type],col1.[name],convert(varchar(max),col1.text) + isnull(convert(varchar(max),col2.Text),'')
+ isnull(convert(varchar(max),col3.Text),'')
+ isnull(convert(varchar(max),col4.Text),'')
+ isnull(convert(varchar(max),col5.Text),'')
+ isnull(convert(varchar(max),col6.Text),'')
+ isnull(convert(varchar(max),col7.Text),'')
[Code] .....
View 3 Replies
View Related
Jun 4, 2008
hello friends
my one insert code lines is below :) what does int32 mean ? AND WHAT IS DIFFERENT BETWEEN ONE CODE LINES AND SECOND CODE LINES :)Dim conn As New SqlConnection(ConfigurationManager.ConnectionStrings("ConnectionString").ConnectionString)
Dim cmd As New SqlCommand("Insert into table1 (UserId) VALUES (@UserId)", conn)
'you should use sproc instead
cmd.Parameters.AddWithValue("@UserId", textbox1.text)
'your value
Try
conn.Open()Dim rows As Int32 = cmd.ExecuteNonQuery()
conn.Close()Trace.Write(String.Format("You have {0} rows inserted successfully!", rows.ToString()))
Catch sex As SqlExceptionThrow sex
Finally
If conn.State <> Data.ConnectionState.Closed Then
conn.Close()
End If
End Try
MY SECOND INSERT CODE LINES IS BELOWDim SglDataSource2, yeni As New SqlDataSource()
SglDataSource2.ConnectionString = ConfigurationManager.ConnectionStrings("ConnectionString").ToString
SglDataSource2.InsertCommandType = SqlDataSourceCommandType.Text
SglDataSource2.InsertCommand = "INSERT INTO urunlistesi2 (kategori1) VALUES (@kategori1)"
SglDataSource2.InsertParameters.Add("kategori1", kategoril1.Text)Dim rowsaffected As Integer = 0
Try
rowsaffected = SglDataSource2.Insert()Catch ex As Exception
Server.Transfer("yardim.aspx")
Finally
SglDataSource2 = Nothing
End Try
If rowsaffected <> 1 ThenServer.Transfer("yardim.aspx")
ElseServer.Transfer("urunsat.aspx")
End If
cheers
View 2 Replies
View Related
Jul 2, 2014
We're getting
Msg 1013, Level 16, State 1, Line 1
The objects "MYTEST2.TEST" and "mytest.TEST" in the FROM clause have the same exposed names. Use correlation names to distinguish them.use of fully qualified names is allowed without having to alias them.One workaround is changing compatibility mode to 80.Is there another (startup flag?).Reason for no alias: MS Reportbuilder doesn't provide them when building queries
CREATE SCHEMA MYTEST;
go
CREATE SCHEMA MYTEST2;
go
CREATE TABLE MYTEST.TEST
[code]....
View 2 Replies
View Related
