SQL Server 2012 :: How To Append Underscores Based On The Level
Oct 8, 2014
I have a table that looks like below.
DECLARE @Tree TABLE
(
NAME VARCHAR(100),
[LEVEL] INT
)
INSERT INTO @Tree
SELECT 'ABCD', 1
UNION
SELECT 'ABBBCDD', 2
UNION
SELECT 'AABBCCDD', 2
UNION
SELECT 'AAAABBBBCCCCDDDD', 3
My question is based on the Level, I want to append that many _(underscores) before the name.
Eg : for level 3 I want the name as ___AAAABBBBCCCCDDDD.
I was thinking to insert this into a temp table and call a while statement based on the number.
View 2 Replies
ADVERTISEMENT
Dec 28, 2014
I have 10k indexes I need to rebuild and each time the script reaches an error it stops all further activity. How can I append 'GO' to the end of each line so it will continue on error messages?
Once I have the syntax I can do a find and replace function in Notepad++
USE [AdventureWorks2014] + char(13) + char(10) + GO
ALTER INDEX [IX_Person] ON [Person].[Person] REBUILD PARTITION = ALL WITH (PAD_INDEX = OFF) + char(13) + char(10) + GO
ALTER INDEX [IX_Emp] ON [HumanResources].[Employee] REBUILD PARTITION = ALL WITH (PAD_INDEX = OFF) + char(13) + char(10) + GO
************** Truncate ***********
View 3 Replies
View Related
Apr 3, 2014
I want to loop through rows and append values to a declared variable. The example below returns nothing from Print @output, it's as if my @output variable is being reset on every iteration.
declare @i int,@output varchar(max)
set @i = 1
while @i < 10
begin
set @output = @output + convert(varchar(max),@i) + ','
print @output
set @i = @i +1
end
View 6 Replies
View Related
Oct 12, 2014
I am trying to enable CDC feature in SQL Server 2012 Enterprise Edition ( 11.0.2424.0).The command to enable CDC for Database worked fine, but the command for enabling CDC on Table failed.Command used for enabling CDC on table is as follows.
USE DatabaseName
GO
EXEC sys.sp_cdc_enable_table
@source_schema = N'dbo',
@source_name = N'TableName',
@role_name = NULL,
@supports_net_changes = 1
Following is the error message got
Msg 22832, Level 16, State 1, Procedure sp_cdc_enable_table_internal, Line 623...Could not update the metadata that indicates table [dbo].[TableName] is enabled for Change Data Capture. The failure occurred when executing the command '[sys].[sp_cdc_add_job] @job_type = N'capture''. The error returned was 22836: 'Could not update the metadata for database DatabaseName to indicate that a Change Data Capture job has been added. The failure occurred when executing the command 'sp_add_ jobstep_ internal'. The error returned was 14234: 'The specified '@server' is invalid (valid values are returned by sp_helpserver).'. Use the action and error to determine the cause of the failure and resubmit the request.'. Use the action and error to determine the cause of the failure and resubmit the request.
View 4 Replies
View Related
Oct 10, 2015
i have below queries each select is fetching records at one level. Is there a way i can write single query to get to nth level (recursion) instead joining same table 10 times (i don't know in some cases there is may be next level) I stopped at 10th level now. In below example i gave only two levels.
SELECT Distinct
a.Col1 AS EmpID,
a.Col1 AS EmpID,
a.Col2 AS Emp_guid,
a.Col2 AS Emp_guid,
case
[code].....
View 1 Replies
View Related
Mar 11, 2015
I've got a fairly large hierarchy table and I'm trying to put together a query to find the lowest level descendants of the hierarchy. I think there must be some way to use the "Breadth-first" approach that's stated in the MSDN technet sites about SQL Server HierarchyID but i'm not sure how to write the necessary T-SQL to traverse that. I know I can get all the descendants of a parent node like this
SELECT *
FROM AdventureWorks2012.HumanResources.Employee
WHERE OrganizationNode.IsDescendantOf(@ParentNode) = 1
However, this query returns all levels for that parent's branch. If I just wanted list of employees that were at the lowest level of the branch(es) for this parent node, how would I do this?
View 1 Replies
View Related
Sep 16, 2014
In one of my environments, I need to grant the ability to view all the logins and agent jobs to an account, but I don't want to give him "sysadmin" or "securityadmin".
View 2 Replies
View Related
Aug 3, 2000
I have this string 'RDYE29M____TNAS__CSRBRUBRU807-CUT-Step-3' and I am taking out the Sku which is '29M____TNAS__'. The first seven spaces represent style, the next three are color and the last three are size. What I am having trouble doing is replacing the underscores with spaces - Does anyone have a solution using SQL 7.0?
Thank-you
Merideth Hogan
Systems Analyst
JERZEES Information Services
View 1 Replies
View Related
Aug 18, 2014
trying to create indexes on two tables:
SF_Affiliate_Customer
SF_Affiliate_Customer_Account
on which the following query is based. I need to build indexes so that the query will perform better. Now its very slow..
SELECT DISTINCT C.[afflt_cust_natl_key],[as_of_dt]
FROM [dbo].[SF_Affiliate_Customer] C
WHERE
( [afflt_intrnl_cust_ind] = 'N'
AND [afflt_empl_ind] = 'N'
AND (ISNULL([phys_addr_st_rgn_cd],'')<>'CA' AND ISNULL([mlng_addr_st_rgn_cd],'')<>'CA')
)AND
[code].....
View 3 Replies
View Related
Jan 13, 2015
We have customer accounts that we measure usage. We want to run a report for all customers whose current usage is 0 and a count of how many months it has been zero consecutively. Here is an example.
declare @YourTable table (
CustomerID int,
ReadDate datetime,
usage int
)
insert into @YourTable select 1,' 1 mar 2014',0
insert into @YourTable select 1,' 1 feb 2014',0
[Code] ....
This should return
1,3
2,1
This is what I am currently using but it isn't working right
WITH cte
AS
(
SELECT *,COUNT(1) OVER(PARTITION BY cnt,CustomerID) pt FROM
(
SELECT tt.*
[Code] .....
View 9 Replies
View Related
Mar 10, 2015
I have the table below and want to show the prop_code if the rent_review_date count is less than 1 in 12 months. This means to show only propcode if there has not been any rent update since the first rent_review_date
DECLARE @table TABLE
( Prop_Code INT
,Current_Rent INT
,Revised_Rent INT
,Rent_Review_Date varchar(10)
,Rent_Review_Time DATEtime)
[Code] .....
View 6 Replies
View Related
Sep 20, 2015
There is a STIG Check that does not allow grant "Connect SQL" directly to any logins except SQL System and the SA account. My way of resolving this is to do the following:
Step One:
We create a Server Role called SQL_APPLICATIONS – for the application accounts
We create a Server Role called SQL_DBA – for the DBA accounts
and give them direct “Connect SQL’ server permissions. MAKE THE ROLE OWNER = sysadmin (group)
Note: I think that creating a Server Role is only available starting with SQL Server 2012, but not sure. I am using SQL 2012
Step two:
I add the members (Logins - SQL & Windows) – in this case any application accounts and DBA accounts to the new roles respectively
Step three:
I remove the “Connect SQL” Permission from each Login
The first problem i noticed is that the maintenance plans failed with "The owner domainusername of job db_backup does not have server access.I am currently using a test system and wondered If you think I will have trouble with the application connecting when I try and implement on the production systems.
View 3 Replies
View Related
Apr 21, 2006
HiI need to set security for row level but not based on Database user'slogin. It should be based on the user table login. For the particularuser I need to allow only the particular records to access insert,update delete and select.Let me explain clearlyFor example think we are using asp/asp.net websiteEg:www.test.comSo take this is our website and if you try this URL then you will get awindow for Login name and password.For example the Login name is windows user name (Here windows usermeans server windows user and not client) and windows password. So ifyou have login user id you can able to login in our site and we haveanother check. We have our own usertable this table consist all theuser login names and user rights. We will check the windows user whologin in our site has rights in the usertable I mean he is present inthe usertable if he is not present then we will display a message youhave no rights to access this site.If he has login id in our usertable then he allowed viewing ourpages. Still if he has the login id we will check the user who loginhas how much right to access to each page and the records of each tableits all depend on the user rights.So, here I need the row level security. For each and every table weneed to check the corresponding user and executing the record producelot of business logic problem for us.So after the user login we need automatically to set row levelsecurity for all the tables. Based on the user who login.So from there if we try select * from <tablename> then we can only ableto get the allowed records to select, insert, update, delete.Please can some one help how to solve this?Note:For some help you can refer the below URL (See in that they only givenabout the row level and column level security for each database usersnot for our required concept)http://www.microsoft.com/technet/pr...5/multisec.mspxThanks in advanceRams
View 1 Replies
View Related
Jun 3, 2006
Hi,
The column names I'm using often have underscores in them. I've noticed that, when writing script in the script component editor, the underscore characters mysteriously dissapear. Is this a known bug? (I can't find any reference to this by Googling)
Thanks in advance,
Lawrie.
View 4 Replies
View Related
Feb 17, 2014
I have two tables with this info:
TABLE 1
COL1 COL2 COL3
AAA BBB CCC
QQQ WWW EEE
AAA SSS DDD
WWW EEE RRR
BBB BBB BBB
TABLE 2
COL1 COL2 COL3 COL4
b b b 343
a a a 344
c c c 345
d d d 346
e e e 347
I want to insert TABLE 1 into TABLE 2 with a query that will auto increment to COL4 looking like this:
COL1 COL2 COL3 COL4
b b b 343
a a a 344
c c c 345
d d d 346
e e e 347
AAA BBB CCC 348
QQQ WWW EEE 349
AAA SSS DDD 350
WWW EEE RRR 351
BBB BBB BBB 352
I know this can be done easily by just altering the column to have an auto-increment datatype, but I currently cannot do that at this moment.
View 5 Replies
View Related
Feb 19, 2014
CREATE TABLE #Names
( ID INT IDENTITY(1,1),
NAME VARCHAR(100)
)
INSERT INTO #Names VALUES ('S-SQLXX')
INSERT INTO #Names VALUES ('S-SQLXX.NA.SN.ORG')
INSERT INTO #Names VALUES ('S-SQLYY')
INSERT INTO #Names VALUES ('S-SQLYY.NA.SN.ORG')
INSERT INTO #Names VALUES ('S-SQLCL-HR')
INSERT INTO #Names VALUES ('S-SQLCL-MIS')
SELECT * FROM #Names
--I want to filter out S-SQLXX.NA.SN.ORG because S-SQLXX.NA.SN.ORG is a duplicate of S-SQLXX eliminating .NA.SN.ORG from it.
--I want to filter out S-SQLYY.NA.SN.ORG because S-SQLYY.NA.SN.ORG is a duplicate of S-SQLYY eliminating .NA.SN.ORG from it.
--However I want to keep S-SQLCL-HR and S-SQLCL-MIS in my list of names as they do not have .NA.SN.ORG as a part of their name
--I want ONLY these returned IN the SELECT
SELECT * FROM #Names WHERE ID IN (1,3,5,6)
DROP TABLE #Names
View 1 Replies
View Related
Feb 21, 2014
I am trying to update records based on the results of a query with a subquery.
The result set being produced shows the record of an item number. This result produces the correct ItemNo which I need to update. The field I am looking to update is an integer named Block.
When I run the update statement all records are updated and not the result set when I run the query by itself.
Below you will find the code I am running:
create table #Items
(
ItemNovarchar (50),
SearchNo varchar (50),
Historical int,
Blocked int
[Code] ....
Below is the code I am using in an attempt to update the block column but it updates all records and not the ones which I need to have the Blocked field set to 1.
Update #items set Blocked = 1
Where Exists
(
SELECT ItemNo=MAX(CASE rn WHEN 1 THEN ItemNo END)
--,SearchNo
--,COUNT(*)
[Code] ...
Why is the update changing each record? How can I change the update to choose the correct records?
View 6 Replies
View Related
Feb 25, 2014
I have a very simple query like the following…
SELECT table2.column_code2,
table2.column_description2,
table2.column_code1,
table1.column_description1
FROM database_001.table2 table1 LFET OUTER JOIN database_001.table2 table1 on (table2.column_code1 = table1.column_code1)
From this query, its returning me a result set of something like below:
--------------------------------------------------------------------------------------------------
column_code1 column_description1 column_code2 column_description2
--------------------------------------------------------------------------------------------------
RO1 BOOK RL1 PDF/ECOPY
RO2 PAPER RL2 CONFERENCE
RO5 JOURNAL RL11 OTHER
Now, on the above query I want to insert three extra columns with the name (status, location and contact) where the results in the extra three columns would be based on the conditions I want to define in the query based on the above results…
Something for example (I am not trying to write a condition: my question is how to write it),
if column_code1 = RO1 and column_description2 = PDF/ECOPY on status column it should return a value ‘ONLINE’ & on location column it should return ‘WEB’ and on contact column it should write ‘BOB’.
Also, if column_code1 = RO5 and column_description1 = JOURNAL on status column it should return a value ‘ON PRESS FOR PRINT’ & on location column it should return ‘S.R STREET, LONDON’ and on contact column it should write ‘SMITH’ like below result…so the final output should be the top four columns and the extra three columns…
See the attachment for better formatting...
---------------------------------------------------------------------------------------------
status location contact
---------------------------------------------------------------------------------------------
ONLINE WEB BOB
ON PRESS FOR PRINT S.R STREET, LONDON SMITH
View 7 Replies
View Related
Mar 21, 2014
What I need to do it select the top 80 percent of records per group based on the group total. To be clear I am not trying to just grab the top x percent of rows.
Table 1:
DealerID RepairID
1 1
1 2
1 3
1 4
1 5
1 6
1 7
1 8
1 9
1 10
2 11
2 12
2 13
Table 2:
RepairID Tire
1 225/65R17 102T
2 225/65R17 102T
3 225/65R17 102T
4 235/60R18 102V
5 235/60R18 102V
6 235/60R18 102V
7 235/60R18 102V
8 205/55R16 89H
9 205/70R15 89H
13 225/65R17 102T
Table 1 has the total number of repair orders per dealer. This can be obtained by simply grouping on DealerID and counting the number of RepairIDs.
Table 2 has information on some of the repair orders and it is needed to select the top 80% of tire sizes. This table will be joined to Table 1 and grouped by DealerID and Tire.
Desired Output:
DealerIDTire RepairsOfThisTireRepairCount PercentOfTotalRepairOrders
1 235/60R18 102V4 10 40
1 225/65R17 102T3 10 30
1 205/55R16 89H1 10 10
2 225/65R17 102T1 3 33
The equation I am given to calculate the top tires per dealer is as follows: Total # of tires for the size / Total # of repair orders per dealer.
Here is what I have so far though I think I might have to rewrite all of it.
SELECT
DealerID ,
COUNT(RepairID)
INTO #TotalDealerRepairOrders
FROM
dbo.Table1
GROUP BY
DealerID
SELECT
[code].....
View 9 Replies
View Related
Sep 24, 2014
I've two tables A, B. In A table, I need to define the primary key with combination of 2 columns and this Primary Key will be a foreign key in table B. Based on these PK and FK I'll be writing a join to get the second column in table B.
View 0 Replies
View Related
Nov 10, 2014
I am wanting to creating a column based on a value in a flatfile, and insert that value into the destination table...
I have a flatfile and a oledb destination, I dropped a script component on the dataflow tab, and I am wanting to take an existing field and create a for lack of a better word, "CODE" field based on that value. How would I accomplish this?
Example--- where description = Test1 code = 1, Test2 code = 2, and same thing for Test3
Description code
Test1 1
Test2 2
Test3 3
View 6 Replies
View Related
May 7, 2015
I would like to replace the value in the Select query of CO OWNER with a space ' ' or NULL if the ORDINAL value = 0.
The CO OWNER name is stored in the CARDNAME table, and the OWNER name is stored in the NAME table. I can not change the db structure.
JEAN is the ACCOUNT owner and BILL is CO OWNER of two cards.
Current Select Results:
ACCOUNT CARD ORDINAL CO OWNER OWNER
200500 9999999999999100 2 BILL JEAN
200500 9999999999999101 1 BILL JEAN
200500 9999999999999102 0 BILL JEAN
Desired Select Results:
ACCOUNT CARD ORDINAL CO OWNER OWNER
200500 9999999999999100 2 BILL JEAN
200500 9999999999999101 1 BILL JEAN
200500 9999999999999102 0 NULL JEAN
Current SQL Select statement:
SELECT DISTINCT
CARD.PARENTACCOUNT AS ACCOUNT,
CARD.NUMBER AS CARD,
CARD.ORDINAL,
CARD.STATUS,
CARDNAME.FIRST AS CO_OWNER,
[code]....
View 9 Replies
View Related
Aug 17, 2015
I am trying to select records based on a year.
DECLARE @Date
SET @Date = 2012
DECLARE @Year int
SET @Year = (SELECT DATEPART(yyyy,@Date))
SELECT @Year AS Year
--SELECT *
-- FROM [Orders].[dbo].[Orders] od
-- WHERE .Orderl_Date < @Date;
----WHERE DATEPART(yyyy,@Date)= @Year
----WHERE DATEPART(yyyy,od.Order_Date)= @ArchiveYear
View 5 Replies
View Related
Aug 17, 2015
DECLARE @Date
SET @Date = 2012
DECLARE @Year int
SET @Year = (SELECT DATEPART(yyyy,@Date))
SELECT @Year AS Year
--SELECT *
-- FROM [Orders].[dbo].[Orders] od
-- WHERE .Orderl_Date < @Date;
----WHERE DATEPART(yyyy,@Date)= @Year
----WHERE DATEPART(yyyy,od.Order_Date)= @ArchiveYear
View 1 Replies
View Related
Sep 15, 2015
Lets say I have a set of columns as follows:
Table.Name - Table.ID - Table.Code
I want to write a query that will cycle through the results and if it comes across another record that has a matching Table.ID I want to exclude that row from the result set.
I am not all too familiar with how to use either a Case or If..Else Statement within a Sql statement that would accomplish this.
View 7 Replies
View Related
Sep 29, 2015
I have a table that has multiple transactions for stock items.
This table holds all records relating to items that are inducted onto the system and there movement. For each stock item i am interested in getting the drop destination, if it has one, and only when it follows the sequential order of "Inducted>OnTransport>Dropped" (this sequence isn't always the case). Also note the CreatedDate for the Inducted and OnTransport records for the valid sequences are always the same. Below is a valid sequence for a stock item so i would want to return 'Lane01' for the Destination of this occurrence of the stock item, if this item didn't have a valid drop location then destination would be blank. Also note each stock item can be inducted more than one time per-day.
I think i have managed to build the below sql but it will only do one item at a time, so would have to wrap it in a function. Is there a way of writing a set based select statement that gets all the inducted items and for the ones that do follow the "Inducted>OnTransport>Dropped" return the destination it was dropped at? I've attached scrips below:
DECLARE @StockItemID nVarchar(128)
DECLARE @CreateDate DATETIME
Set @StockItemID='8cbe17da-6079-4170-b27a-41c0d38830f6'
Set @CreateDate = CAST('2015-08-31 13:52:39.890' AS datetime)
[Code] ....
View 9 Replies
View Related
Mar 19, 2014
create table #sample
(
Name varchar(100),
value int
[code]....
From that I wanted to delete some records based on following condition. randomly select any number of records but sum(value) = 125 and name = xxx
View 2 Replies
View Related
Jul 31, 2014
I have a data set that looks something like like this:
Row# Data
1 A
2 B
3 B
4 A
5 B
6 B
7 A
8 A
9 A
I need wanting to assign a group ID to the data based on consecutive values. Here's what I need my data to look like:
Row# Data GroupID
1 A 1
2 B 2
3 B 2
4 A 3
5 B 4
6 B 4
7 A 5
8 A 5
9 A 5
You'll notice that there are only two values in DATA but whenever there is a flip between them, the GroupID increments.
View 2 Replies
View Related
Aug 15, 2014
New column calculation
CREATE TABLE MAIN
(
ORDERNO VARCHAR(20),
LASTUPDATEDDATE DATE,
ORDERCLIENTINITIALFEE NUMERIC ,
[Code] .....
---OUTPUT
--=======
INSERT INTO MAIN VALUES ('1000', '1/1/2014',3000,1000,700,1500)
INSERT INTO MAIN VALUES ('1000', '3/5/2014',1000,2000,650,200)
INSERT INTO MAIN VALUES ('1000', '5/10/2014',500,5000,375,125)
INSERT INTO MAIN VALUES ('1000', '11/20/2014',100,2000,400,300)
INSERT INTO MAIN VALUES ('1000', '8/20/2014',100,3500,675,1300)
[Code] ....
View 2 Replies
View Related
Aug 25, 2014
We have a database and have 6-7 growing tables. All the tables have Primary and foreign key relation. I want to do partition based on the date column.
I need 3 partitions
First partition has to hold present data
second partition need to hold the previous year data (SAS storage)
Third partition need to hold all the old data and need to be in the archive database
I understand that first we need to disable the constraints (Indexes PK & FK)
Then create partition function and partition schema
Then Create the Constraints again
View 9 Replies
View Related
Nov 12, 2014
I am working on a sql data that has a list of product names, shipment type and the count of shipments. The values are listed as rows in the database. it will be in the below format.I want to transpose only the shipment type and the corresponding count of each product name in the below format.I tried to do this but i am not able to achieve in the correct format.
View 6 Replies
View Related
Dec 19, 2014
I have a requirement regarding a color combination data. I have a lookup table that holds a colorid, p1, p2, p3, p4 to p8 which will be having colors Red, Green and Amber. P1 to P8 columns holds these three colors based on their combinations.
I have attached the look up table data for reference.I need to pass the color values to p1 to p8 and need to retrieve the color id based on the passed color. If we pass values for all p1 to p8 then it is easy to get the color code, however it will not happen. The passed values may be dynamic. ie we will not have all 8 values all the times. sometimes we will have 2 colors passed, sometimes 5 colors will be passed.
If i pass only two colors say red and red, i need the color id of only the row that has red and red for p1 and p2 alone. i dont want want all the colorid's that has red and red in p1 and p2 and some other colors in p3 to p4.
The exact colorid of the combination must be returned on passing the values to p1 and p2.I am passing Red and Red as values to P1 and P2. In the look up table we can have 10 rows that has red and red i p1 and p2 like
colorid p1p2p3p4p5p6p7p8
1 redred
10 redredred
20 redredred
30 redredredred
40 redredredredred
50 redredredredredred
60 redredredredredredred
70 redredredredredredredred
So the result must have only the colorid 1 and not all the colorid's listed above. when I pass 3 red as values for p1, p2, p3 then the result must be 10. Colorid 1, 20, 30, 40, 50, 60 and 70 must not come in the result.I need a function or procedure that will accept the arguments and provide me the result based on the values.
View 2 Replies
View Related
Jul 1, 2015
I have a client data which has the candidate id, a start date which will have only the date in varchar format and a time value associated to that date in varchar format in a seperate column.
To give a brief explanation about the data a candidate will come to study center at any time point in a day for example 10:00 AM on 20-10-2014. The start date will be 20-10-2014 and from 10:00 AM he will have test based on the time point. So if the time point is 2 HR, then at 12:00 PM he will have a test. If the time point is 8 HR, it will get added with 10:00 AM and based on this he will have the test at 06:00 PM. When the timepoint reaches 00:00 the start date needs to be the next date instead of 20-10-2014.
The start date needs to be appended with the time value such that when it crosses over the time 00:00, the start date needs to get increased by 1 ie the next day. I have added the start date to the time by using the code below
CAST(STARTDATE as datetime) + CAST(CAST(STUFF([TIME],3,0,':') as time(0)) as datetime) as [EXPECTEDDATETIME]
By this above code i have created the expected datetime however
I will not be able to hardcode the value due to dynamic data. I tried to apply >= and < to the time value something like
case when MyTime >= '00:00' and MyTime < '08:10' the Dateadd(day, 1, date)
This works perfect but my concern is that I cannot put the value 08:10 because it will not a constant value for all rows.
I have provided a screenshot of my data and a expected date column for reference.
Candidate StartDateStartTimeExpected DateTime Timepoint
1 20141020 1000 2014-10-20 10:00:00 0 HR
1 201410201200 2014-10-20 12:00:00 02 HR
1 201410201400 2014-10-20 14:00:00 04 HR
1 201410201800 2014-10-20 18:00:00 08 HR
1 201410200000 2014-10-21 00:00:00 12 HR
1 201410201200 2014-10-21 12:00:00 24 HR
2 20141020 1100 2014-10-20 11:00:00 0 HR
[Code] ....
I have also attached the data for reference.
View 9 Replies
View Related
