SQL Server 2012 :: How To Insert Data Into Table From Linked Server
Nov 19, 2013
I wonder if it possible to move data from tables on a linked server to a "normal database"?
Name linked server: Covas
Name table on linked server: tblCountries
Name field: cntCountryName
Name "normal" database: CovasCopy
Name "normal" table: Countries (or dbo.Countries)
Name "normal" field: Country
This is just a test setup. I figure that if I get this working the rest will be easier.
My current query:
select * from openquery(COVAS,'
INSERT INTO CovasCopy.dbo.Countries(Country)
SELECT cntCountryName FROM db_covas.tblCountries;')
View 8 Replies
ADVERTISEMENT
Aug 12, 2014
I want Compare two Table data and insert changed field to the third table ...
View 9 Replies
View Related
Apr 3, 2015
I am unable to load data from flat file to sql table using bulk insert sql statement
My code:-
DECLARE @filePath VARCHAR(200)
DECLARE @sql VARCHAR(8000)
Declare @filename varchar(100)
set @filename='CCNVZ_150401054418'
SET @filePath = 'I:IncomingFiles'+@FileName+'.txt'
[Code] .....
View 1 Replies
View Related
Aug 28, 2014
I was trying to figure out what the OPENQUERY Syntax is to Insert into SQL Server Table from Oracle Linked Server.
View 7 Replies
View Related
Oct 23, 2006
Insert statement to remote server is running very slowly. I have run Profiler and find there is a 'sp_cursor' call for each row. The source system is SQL2005 and destination is SQL2000(sp4). The linked server is using 'SQL server' type connection. Source query is against a single table with a where clause. source and destination table are identical with Primary keys. Purpose is just to move the rows. Connection is a slow network connection - should be ok. I have already overcome same problem for related update and delete queries by use of 'EXECUTE (query) AT LinkedServer' that works great - but insert can not take advantage of this...
INSERT [LinkedServSQL2000sp4].dbname.schema.tablename
({column list})
Select
{column list}
from tablename
WHERE col1 = '7/20/2006'
AND col2 in (2,5,7,12,32,54,45,33)
Any thoughts?
View 1 Replies
View Related
Apr 22, 2015
I have a situation that I need to add a field to a table over linked server. The specifications of this is dynamic and it is being done in TQL / Stored procedures and this can not change. My code is generating the statement just fine and if I copy paste it to a new SSMS window and execute it WORKS.. The problem is I need to dynamically generate the statement (I am doing that just fine, I THINK). THEN I need to execute the statement IN THE SPROC, this part is not working.
Here is the code:
SET @AlterSQL = @DestinationServerName + '.[' + @DestinationDBName +'].' + @DestinationSchemaName + '.sp_executesql N'' ALTER TABLE '
+ @DestinationTableName + ' ADD ' + @TempColumn + ' int' + CHAR(39)
The above Creates this when I expose it via a PRINT statement:
addb15.[FSParallel].dbo.sp_executesql N' ALTER TABLE Node ADD ImportIdentity int'
After I create the statement I use:
EXEC @AlterSQL
And this returns the following error:
Msg 2812, Level 16, State 62, Procedure ETLDynamicImport, Line 244
Could not find stored procedure 'FSParallel.dbo.sp_executesql N' ALTER TABLE Node ADD ImportIdentity int''.
<hr noshade size='1' width='250' color='#BBC8E5'>
View 1 Replies
View Related
Oct 12, 2000
Good afternoon one and all,
I have the folowing problem that I could use some help with :
I have an SQL server database acting as a back end to an access dbase. The SQL srv table contains over 32 million records and I am trying to use an append query (in access) to import a further 2 million records to the SQLSRV table. The append query fails with the message 'Insert on table bcdsales failed' followed by an ODBC timeout error message. I can append one record fine but a mass import fails.
Unfortunately i can't use SQL srv to do the import (internal policy says we must stick with access front end for now).
Any and all ideas welcomed.
TIA for your time and attention
Gurmi
View 2 Replies
View Related
Aug 13, 2012
I have a historical table on a dedicated SQL Server (let's call it the reporting db) that is populated every morning with production data that does not already exist. The data in the prod table is purged after 7 days and nothing is ever deleted from the historical table. I have set up the linked server between the two 2008 SQL Servers, but when I try to run this simple query from the reporting DB, it takes more than 5 minutes and still "executing". I eventually have to cancel it:
-- INSERT INTO Temp_Import_historical
SELECT TOP 1 *
FROM [192.168.1.100].ProdDB.dbo.Temp_Import_historical a
WHERE NOT EXISTS (select [Temp_Import_ID] from Temp_Import_historical where a.[Temp_Import_ID] = Temp_Import_historical.[Temp_Import_ID])
I have omitted the INSERT statement on purpose, since I can't even get to output 1 row. Why this is such a resource intensive query?
View 9 Replies
View Related
Jul 12, 2007
I have a 2000 machine which calls a stored procedure on another 2000 machine via a linked server. The results come back and insert into a temporary table.
When I use the same code executing the from the 2000 machine over to 2005 machine via a linked server I cannot insert into the table. But I am able to see the data if I remove the insert statement.
I have tried to place the data into a permanent table without success. I have also checked to be sure the linked server properties are the same.
Any help on this would be appreciated. Below is the code. It is very simple and returns only one value but the bigger procedure that is ran returns several records and mutliple columns. This seems to easy but doesn't work.
DECLARE @retval AS INT
DECLARE @value AS INT
SET @value = 4
CREATE TABLE #TempTable (Value DECIMAL(19, 10) NULL)
INSERT INTO #TempTable
EXEC @RetVal = Server.Database.dbo.testproc @value
SELECT * FROM #TempTable
DROP TABLE #TempTable
View 6 Replies
View Related
Jun 5, 2014
In Oracle when i create any procedure i define parameter datatype linked to under lying table.
For ex
create procedure testprocedure
(param1 customer.name%type,
param2 customer.salary%type )
Here i have defined param1 and param2 with datatype of name and salary of customer table respectively.
This way i do not need to worry about modifying param1 and param2 datatypes when datatypes of name & salary of customer table changes in future.
How can i accomplish this in SQL server.
View 2 Replies
View Related
Feb 26, 2015
I am writing a query to return some production data. Basically i need to insert either 1 or 2 rows into a Table variable based on a decision as to does the production part make 1 or 2 items ( The Raw data does not allow for this it comes from a look up in my database)
I can retrieve all the source data i need easily but when i come to insert it into the table variable i need to insert 1 record if its a single part or 2 records if its a twin part. I know could use a cursor but im sure there has to be an easier way !
Below is the code i have at the moment
declare @startdate as datetime
declare @enddate as datetime
declare @Line as Integer
DECLARE @count INT
set @startdate = '2015-01-01'
set @enddate = '2015-01-31'
[Code] .....
View 1 Replies
View Related
Dec 23, 2013
I just created a new table with over 100 Columns and I need to populated just the first 2 columns.
The first columns to populate is an identify column that is the primary key. The second column is a foreign_key to an other column and I am trying to populate this columns with all the values from the foreign_key value. This is what I am trying to do.
column1 = ID
column2= P_CLIENT_D
SET IDENTITY_INSERT PIM1 ON
INSERT INTO PIM1 (P_CLIENT_ID)
SELECT
Client.ID
FROMP_Client
So I am trying to insert both an identity values and a value from an other table while leaving the other columns blank. How do I go about doing this.
View 1 Replies
View Related
Jul 28, 2015
In a t-sql 2012 sql script, I have the following script, that only works for a few records since the value of TST.dbo.LockCombination.seq only contains the value or 1 in most cases. Basically for every join listed below, there should be 5 records where each record has a distinct seq value of 1, 2, 3, 4, and 5. Thus my goal is to determine how to add the missing rows to the TST.dbo.LockCombination where there are no rows for seq values of between 2 to 5. I would like to know how to insert the missing rows and then do the following update statement. Thus can you show me the sql on how to add the rows for at least one of the missing sequence numbers?
UDATE LKC
SET LKC.combo = lockCombo2
FROM [LockerPopulation] A
JOIN TST.dbo.School SCH ON A.schoolnumber = SCH.type
JOIN TST.dbo.Locker LKR ON SCH.schoolID = LKR.schoolID AND A.lockerNumber = LKR.number
JOIN TST.dbo.Lock LK ON LKR.lockID = LK.lockID
JOIN TST.dbo.LockCombination LKC ON LK.lockID = LKC.lockID
WHERE LKC.seq = 2
A normal select statement looks like the following:
select * from TST.dbo.Locker LKR
JOIN TST.dbo.Lock LK ON LKR.lockID = LK.lockID
JOIN TST.dbo.LockCombination LKC ON LK.lockID = LKC.lockID
where LKR.number in (000,001,1237)
In case you need the ddl statements for the tables affected here are the ddl statements:
CREATE TABLE [dbo].[Locker](
[lockerID] [int] IDENTITY(1,1) NOT FOR REPLICATION NOT NULL,
[schoolID] [int] NOT NULL,
[number] [varchar](10) NOT NULL,
[serialNumber] [varchar](20) NULL,
[type] [varchar](3) NULL,
[locationID] [int] NULL,
[code]...-
View 1 Replies
View Related
Sep 23, 2014
I am finding it difficult to find an example that allows for insertion of additional rows into a table, without dropping the table I'm inserting into. Or inserting specific values. Like this example..
[URL] ....
I have 6 table I am formatting the data to conform to the final table as I'm inserting it into, but none of these examples gives me the example needed. I am using SQL 2012.
<code>
SELECT
CONVERT(VARCHAR(50),[FName]) + ' ' + CONVERT(VARCHAR(50),[LName]) AS [CustName]
,CAST('ALARMCOM' as nvarchar(8)) as VendorName
,CONVERT(VARCHAR(25),[CUSTOMER_CS_ACCOUNT_NUMBER]) AS [Cust_ID]
,CONVERT(VARCHAR(40),[Charge_Description])as [ChargeType]
,CASE
[Code] ....
View 6 Replies
View Related
Apr 20, 2015
I am having 2 tables one is staging temp and another is main import table.
In my staging table there are 3 column Col001,Id,Loaddate
in Col001 column data are present with '¯' delemeter.
I am having function which is used to load data from staging to import table using one function.
this function create a insert statement.
My Existing function
-- Description: To Split a Delimited field by a Delimiter
ALTER FUNCTION [dbo].[ufn_SplitFieldByDelimiter]
(
@fieldname varchar(max)
,@delimiter varchar(max)
,@delimiter_count int
[Code] ....
I am unable to get correct statement with above function.
View 1 Replies
View Related
Aug 31, 2015
I have been tasksed to create a data table and stored procedure to extract a special formatted XML file that is an attachment with a standard XML envelope. The XML file is an attchment in a node within the XML wrapper. There are other MIME files (pdf's ) that are handle by a seperate procedure. But I need to just extract the XML file attached along with those and put it into the datable with some other PK?FK fields.
Is a blob the best datatype. How to I insert that XML file into it?
View 2 Replies
View Related
Oct 2, 2015
In a special request run, I need to update locker and lock tables in a sql server 2012 database, I have the following 2 table definitiions:
CREATE TABLE [dbo].[Locker](
[lockerID] [int] IDENTITY(1,1) NOT NULL,
[schoolID] [int] NOT NULL,
[number] [varchar](10) NOT NULL,
[lockID] [int] NULL
CONSTRAINT [PK_Locker] PRIMARY KEY NONCLUSTERED
[code]....
The locker table is the main table and the lock table is the secondary table. I need to add 500 new locker numbers that the user has given to me to place in the locker table and is uniquely defined by LockerID. I also need to add 500 new rows to the corresponding lock table that is uniquely defined in the lock table and identified by the lockid.
Since lockid is a key value in the lock table and is uniquely defined in the locker table, I would like to know how to update the lock table with the 500 new rows. I would then like to take value of lockid (from lock table for the 500 new rows that were created) and uniquely place those 500 lockids uniquely into the 500 rows that were created for the lock table.
I have sql that looks like the following so far:
declare @SchoolID int = 999
insert into test.dbo.Locker ( [schoolID], [number])
select distinct LKR.schoolID, A.lockerNumber
FROM [InputTable] A
JOIN test.dbo.School SCH ON A.schoolnumber = SCH.type and A.schoolnumber = @SchoolNumber
JOIN test.dbo.Locker LKR ON SCH.schoolID = LKR.schoolID
AND A.lockerNumber not in (select number from test.dbo.Locker where schoolID = @SchoolID)
order by LKR.schoolID, A.lockerNumber
I am not certain how to complete the rest of the task of placing lockerid uniquely into lock and locker tables?
View 7 Replies
View Related
Dec 9, 2014
My xml is in below format:
DECLARE @MyXML XML
SET @MyXML = '<RS>
<R id="6330">
<WF id="71445">
<WFS id="12790"> <fname>John12790</fname> </WFS>
[Code] ....
I need to insert into table with TSQL query:
My output should be similar below:
John12790 12790 71445 6330
Eric 12791 12790 71445 6330
John12793 12793 71446 6331
Eric12794 12794 71446 6331
otherwise i need to write huge c# code to execute such thing..
View 2 Replies
View Related
May 14, 2015
I have a problem described as follows: I have a table with one instead of insert trigger:
create table TMessage (ID int identity(1,1), dscp varchar(50))
GO
Alter trigger tr_tmessage on tmessage
instead of insert
as
--Set NoCount On
insert into tmessage
[code]....
When I execute P1 it returns 0 for Id field of @T1.
How can I get the Identity in this case?
PS: I can not use Ident_Current or @@identity as the table insertion hit is very high and can be done concurrently.Also there are some more insertion into different tables in the trigger code, so can not use @@identity either.
View 5 Replies
View Related
Sep 27, 2012
Is there a way to open EDI file in SQL Server and insert the data into tables?
View 9 Replies
View Related
Jul 22, 2013
Overall goal: Write a Bulk Insert statement using the UNC path of a filetable directory.
Issue: When using the UNC path of the filetable directory in a Bulk Insert Statement, receiving "Operating system error code 50(The request is not supported.)" Looking for confirmation as to whether this is truly not supported.
Environment: SQL Server 2012 Standard. Windows Server 2008 R2 Standard
View 9 Replies
View Related
Jan 30, 2014
I am trying to insert values in a single table with four columns from 4 different sources. is it possible to run these 4 insertions in parallel. all these insertion are independent of each other
View 3 Replies
View Related
Jan 14, 2015
I have a SP with Parameters as:
R_ID
P1
P2
P3
P4
P5
I need to insert into a table as below:
R_ID P1
R_ID P2
R_ID P3
R_ID P4
R_ID P5
How can I get this?
View 2 Replies
View Related
Mar 28, 2015
Our system runs a SQL Server 2012 DB, it has a table (table_a) which has over 10M records. Our system have to receive data file from previous system daily which contains approximate 3M updated or new records for table_a. My job is to update table_a with the new data.
The initial solution is:
1 Create a table (table_b) which structur is as the same as table_a
2 Use BCP to import updated records into table_b
3 Remove outdated data in table_a:
delete from table_a inner join table_b on table_a.key_fileds = table_b.key_fields
4 Append updated or new data into table_a:
insert into table_a select * from table_b
As the test result, this solution is very inefficient. Step 3 costs several hours, e.g. How can I improve it?
View 9 Replies
View Related
Oct 25, 2013
I linked an SQL server table into Access, but when I open the table in Access, no data shows. Do I need to set some permissions on the sql table?
View 1 Replies
View Related
Feb 12, 2014
I have created a trigger that is set off every time a new item has been added to TableA.The trigger then inserts 4 rows into TableB that contains two columns (item, task type).
Each row will have the same item, but with a different task type.ie.
TableA.item, 'Planning'
TableA.item, 'Design'
TableA.item, 'Program'
TableA.item, 'Production'
How can I do this with tSQL using a single select statement?
View 6 Replies
View Related
May 20, 2014
I have a table with PO#,Days_to_travel, and Days_warehouse fields. I take the distinct Days_in_warehouse values in the table and insert them into a temp table. I want a script that will insert all of the values in the Days_in_warehouse field from the temp table into the Days_in_warehouse_batch row in table 1 by PO# duplicating the PO records until all of the POs have a record per distinct value.
Example:
Temp table: (Contains only one field with all distinct values in table 1)
Days_in_warehouse
20
30
40
Table 1 :
PO# Days_to_travel Days_in_warehouse Days_in_warehouse_batch
1 10 20
2 5 30
3 7 40
Updated Table 1:
PO# Days_to_travel Days_in_warehouse Days_in_warehouse_batch
1 10 20 20
1 10 20 30
1 10 20 40
2 5 30 20
2 5 30 30
2 5 30 40
3 7 40 20
3 7 40 30
3 7 40 40
How can I update Table 1 to see desired results?
View 3 Replies
View Related
Apr 24, 2014
I have table A (EmployeeNumber, Grouping, Stages)
and
Table B (Grouping, Stages)
Table A could look like the following where the multiple employees could have multiple types and multiple stages.
EmployeeNumber, Type, Stages
100, 1, Stage1
100, 1, Stage2
100, 2, Stage1
100, 2, Stage2
200, 1, Stage1
200, 2, Stage2
Table B is a list of requirements that each employee must have. So every employee must have a type 1 and 2 and the associated stages listed below.
Type, Stage
1, Stage1
1, Stage2
2, Stage1
2, Stage2
2, Stage3
2, Stage4
So I know that each employee should have 2 Type 1's and 4 Type 2's. I hope that makes sense, I'm trying to change my data because ours is very proprietary.
I need to identify employees who do not have all their stages and list the stages they are missing. The final report should only have employees and the associated missing types and stages.
I do a count by employee to see how many types they have to identify the ones that don't have all the types and stages.
My count would look something like this:
EmployeeNumber Type Total
100, 1, 2
100, 2, 2
200, 1, 1
200 1, 2
So I know that employee 100 should have 2 more Type 2's and employee 200 should have 1 more Type 1 and 2 more Type 2's based on the required list.
The problem I'm having is taking that required list and joining to my list of employees with missing data and pulling from it the types and stages that are missing by employee. I thought I could get a list of the employees that are missing information and right join it to the required list where the missing records would be nulls. But, that doesn't work because some employees do have the required information and so I'm not getting any nulls returned.
View 9 Replies
View Related
Jan 14, 2014
What is the best way to transfer data from the staging table into the main table.
Example:
Staging Table Name: TableA_satge (# of rows - millions)
Main Table Name: TableA_main (# of rows - billions)
Note: Staging table may have some data same as the main table.
Currently I am doing:
- Load data into staging table (TableA_stage)
- Remove any duplication of rows from the staging table (TableA_stage)
- Disable all indexes on main table (TableA_main)
- Insert into main table (TableA_main) from staging table (TableA_stage)
- Remove any duplication of rows from the main table using CTE (TableA_main)
- Rebuild indexes on main_table (TableA_main)
The problem with the above method is that, it takes a lot of time and log file size grows very big.
View 9 Replies
View Related
Aug 14, 2015
Is it possible to allow a user to insert and update data in a table but prevent them from performing deletes against that same table? For auditing purposes I need to prevent the end users from being able to delete data.
View 1 Replies
View Related
Mar 21, 2000
If you are doing an insert into a table with 10 columns, but you only have values for 2, is it better to insert 2 and let the table default the others or is it better to insert all 10 using default values for the 8 you don't know? Do you know of any benefits one way or the other? Thanks in advance.
View 1 Replies
View Related
Apr 16, 2015
what is the best way to push records using linked server. below is my query on Source server
insert into LSDestserver.DB.dbo.tablename
select * from #temp order by abc desc
I initially thought to pull records from Source server to LSDestserver but its a temp table. I don't know whether it is possible or not. Is there any other way we can achieve this in optimal way.
View 9 Replies
View Related
Oct 8, 2007
I had a function like below :Public Sub Getdata2(ByVal query, ByVal db, ByVal name)
Dim selectSQL As StringDim con As SqlConnection
Dim cmd As SqlCommand
Dim reader As SqlDataReader
Trycon = New SqlConnection("User ID=xxx;password=xxx;persist security info=True;Initial Catalog=database1;Data Source=xxx.xxx.xxx.xxx.xxx,xxxxx;")
Dim username As String
username = Request.QueryString("username")
selectSQL = "SET DATEFORMAT DMY;Insert into table1(hse_num, st_name, proj_name, unit_num, postal, n_postal, flr_area, flr_sf, flr_rate, flr_ra_sf, land_area, land_sf, land_rate, lnd_ra_sf, prop_code, cont_date, title, sisv_ref, r_date, rec_num, source, username, DGP, Remarks, Sub_Code, caveat, consider, age) select hse_num, st_name, proj_name, unit_num, postal, n_postal, flr_area, flr_sf, flr_rate, flr_ra_sf, land_area, land_sf, land_rate, lnd_ra_sf, prop_code, cont_date, title, sisv_ref, r_date, rec_num, source, '" & username & "', DGP, Remarks, Sub_Code, caveat, consider, age from [yyy.yyy.yyy.yyy,yyyy].database2.dbo.table2 where " & querycmd = New SqlCommand(selectSQL, con)
con.Open()
reader = cmd.ExecuteReader()
lbl.Text = selectSQLCatch ex As Exception
lbl.Text = ex.Message
Finally
If (Not con Is Nothing) Then
con.Close()
con.Dispose()
End If
End Try
End Sub
'-------------------------------------------------------------------------------------------------------------------------------------------------------------------------
May i know that how do i retrieve data from [yyy.yyy.yyy.yyy,yyyy].database2.dbo.table2 due to diffrent server, diffrent UID and Password
View 1 Replies
View Related
