I have a SP with Parameters as:
R_ID
P1
P2
P3
P4
P5
I need to insert into a table as below:
R_ID P1
R_ID P2
R_ID P3
R_ID P4
R_ID P5
How can I get this?
Can we Pass table valued parameters and normal params like integer,varchar etc..to a single stored procedure?
View 1 Replies View RelatedI am creating a function where I want to pass it parameters and then use those parameters in a select statement. When I do that it selects the variable name as a literal not a column. How do I switch that context.
Query:
ALTER FUNCTION [dbo].[ufn_Banner_Orion_Employee_Comparison_parser_v2]
(
@BANNER_COLUMN AS VARCHAR(MAX),
@ORION_COLUMN AS VARCHAR(MAX)
)
RETURNS @Banner_Orion_Employee_Comparison TABLE
[code]....
Returns:
I execute this:
select * from ufn_Banner_Orion_Employee_Comparison_parser_v2 ('a.BANNER_RANK' , 'b.[rank]')
and get:
CerecerezNULLNULLa.BANNER_RANKb.[rank]
I've been tasked with creating a stored procedure which will be executed after a user has input one or more parameters into some search fields. So they could enter their 'order_reference' on its own or combine it with 'addressline1' and so on.
What would be the most proficient way of achieving this?
I had initially looked at using IF, TRY ie:
IF @SearchField= 'order_reference'
BEGIN TRY
select data
from mytables
END TRY
However I'm not sure this is the most efficient way to handle this.
Here is the scenario,
I have 2 stored procedures, SP1 and SP2
SP1 has the following code:
declare @tmp as varchar(300)
set @tmp = 'SELECT * FROM
OPENROWSET ( ''SQLOLEDB'', ''SERVER=.;Trusted_Connection=yes'',
''SET FMTONLY OFF EXEC ' + db_name() + '..StoredProcedure'' )'
EXEC (@tmp)
SP2 has the following code:
SELECT *
FROM SP1 (which won't work because SP1 is a stored procedure. A view, a table valued function, or a temporary table must be used for this)
Views - can't use a view because they don't allow dynamic sql and the db_name() in the OPENROWSET function must be used.
Temp Tables - can't use these because it would cause a large hit on system performance due to the frequency SP2 and others like it will be used.
Functions - My last resort is to use a table valued function as shown:
FUNCTION MyFunction
( )
RETURNS @retTable
(
@Field1 int,
@Field2 varchar(50)
)
AS
BEGIN
-- the problem here is that I need to call SP1 and assign it's resulting data into the
-- @retTable variable
-- this statement is incorrect, but it's meaning is my goal
INSERT @retTableSELECT *FROM SP1
RETURN
END
Hello Gurus,
I have a stored procedure that gathers data from three tables and joins them, two of the tables need to have different rowcounts set, ie. pull only a certain number of rows from one table and only a certain number of rows from another table... The number of rows it should pull are stored within a table for each. Let me explain.... these tables hold Exchange storage group and mailstore data for a number of servers. Each server has a table entry with the number of child storage groups and each storage group has a table entry with the number of child mailstores. The tables get updated every two minutes via a program. I need to be able to get the most Data with the correct child counts for each server and storage group.
I believe that i've found a way to do this with a stored procedure that calls a table-valued function. The table-valued function simply filters down the storage group table to it's number of storage groups, ordered by timestamp. I may be way off here, but i can't tell because both the stored procedure and function check out fine but when i execute the stored procedure it gives me the following error:
Cannot find either column "dbo" or the user-defined function or aggregate "dbo.GetExchSGInfo", or the name is ambiguous.
My code is below:
Stored Procedure:
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE PROCEDURE [dbo].[GetExchangeData2]
@top INT,
@SID INT,
@SGCount INT,
@ServerName VARCHAR(50)
AS
Set @SID = (SELECT ServerID FROM dbo.Servers WHERE ServerName = @ServerName)
Set @top = (SELECT sum(Children) FROM dbo.ExchangeSG WHERE ServerID = @SID)
Set @SGCount = (SELECT SGCount FROM dbo.Servers WHERE ServerID = @SID)
SET ROWCOUNT @top
SELECT dbo.ExchangeMSData.*, dboExchangeMailStore.*, dbo.GetExchSGInfo(@SID,@SGCount) As ExchangeSG, dbo.Servers.*
FROM dbo.Servers INNER JOIN
ExchangeSG ON dbo.Servers.ServerID = ExchangeSG.ServerID INNER JOIN
dbo.ExchangeMailStore ON ExchangeSG.StorageGroupID = dbo.ExchangeMailStore.StorageGroupID INNER JOIN
dbo.ExchangeMSData ON dbo.ExchangeMailStore.MailstoreID = dbo.ExchangeMSData.MailstoreID
WHERE (dbo.Servers.ServerName = @ServerName)
ORDER BY dbo.ExchangeMSData.[TimeStamp] DESC, dbo.ExchangeSG.[TimeStamp] DESC
SET ROWCOUNT 0
And the Function:
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE FUNCTION [dbo].[GetExchSGInfo]
(
@SID INT,
@SGCount INT
)
RETURNS TABLE
AS
RETURN
(
SELECT TOP (@SGCount) *
FROM dbo.ExchangeSG
WHERE ServerID = @SID
ORDER BY [TimeStamp]
)
Can anyone help me?
Thanks.
Hi,
I'm trying to call a Stored Procedure from a Inline Table-Valued Function. Is it possible? If so can someone please tell me how? And also I would like to call this function from a view. Can it be possible? Any help is highly appreciated. Thanks
I am writing a stored procedure that takes in a customer number, a current (most recent) sales order quote, a prior (to most current) sales order quote, a current item 1, and a prior item 1, all of these parameters are required.Then I have current item 2, prior item 2, current item 3, prior item 3, which are optional.
I added an IF to check for the value of current item 2, prior item 2, current item 3, prior item 3, if there are values, then variable tables are created and filled with data, then are retrieved. As it is, my stored procedure returns 3 sets of data when current item 1, prior item 1, current item 2, prior item 2, current item 3, prior item 3 are passed to it, and only one if 2, and 3 are omitted.I would like to learn how can I return this as a one data set, either using a full outer join, or a union all?I am including a copy of my stored procedure as it is.
We are trying to create a TVF that executes a CLR Stored Procedure we wrote to use the results from the SP and transform them for the purposes of returning to the user as a table.
Code Snippet
[SqlFunction ( FillRowMethodName = "FillRow",
TableDefinition = "CustomerID nvarchar(MAX)",
SystemDataAccess = SystemDataAccessKind.Read,
DataAccess = DataAccessKind.Read,
IsDeterministic=false)]
public static IEnumerable GetWishlist () {
using (SqlConnection conn = new SqlConnection ( "Context Connection=true" )) {
List<string> myList = new List<string> ();
conn.Open ();
SqlCommand command = conn.CreateCommand ();
command.CommandText = "GetObject";
command.Parameters.AddWithValue ( "@map", "Item" );
command.CommandType = System.Data.CommandType.StoredProcedure;
using ( SqlDataReader reader = command.ExecuteReader ( System.Data.CommandBehavior.SingleRow )) {
if (reader.Read ()) {
myList.Add ( reader[0] as string );
}
}
return (IEnumerable)myList;
}
}
When command.ExecuteReader is called, I am getting an "Object not defined" error. However, the stored procedure can be used in SQL Management Studio just fine.
Code SnippetEXEC GetObject 'Item'
Is there some sorf of trick I am missing?
Thank you!
I have Table Staffsubjects
with columns and Values
Guid AcademyId StaffId ClassId SegmentId SubjectId Status
1 500 101 007 101 555 1
2 500 101 007 101 201 0
3 500 22 008 105 555 1
I need to do 3 scenarios in this table.
1.First i need to update the row if the status column is 0 to 1
2.Need to insert the row IF SegmentId=@SegmentId and SubjectId<>@SubjectId and StaffId=@StaffId
3.Need to insert the row IF StaffId<>@StaffId And ClassId=@ClassId and SegmentId<>@SegmentId and SubjectId<>@SubjectId
I have wrote the stored procedure to do this. But the problem is If do the update. It is reflecting in the database by changing 0 to 1. But it shows error like cannot insert the duplicate
Here is the stored Procedure what i have wrote
ALTER PROCEDURE [dbo].[InsertAssignTeacherToSubjects]
@AcademyId uniqueidentifier,
@StaffId uniqueidentifier,
@ClassId uniqueidentifier,
@SegmentId uniqueidentifier,
@SubjectId uniqueidentifier
[Code] ....
We have around 5 SP’s which are inserting data into Table A,and these will run in parallel.From the temp tables in the SP,data will be loaded to Table A. We are getting deadlock here.No Begin and End Transaction used in the stored procedure.
What could be done to avoid deadlock.
I need looping through each row of Table valued parameter. I have user defined type
CREATE TYPE [dbo].[PCS_SPEC_ATTR_VALUE] AS TABLE(
[ATTR_NAME] [varchar](256) NULL,
[ATTR_VAL] [varchar](4000) NULL
)
I am using this type in my procedure like
@P_TYPE VARCHAR(4000),
@P_SCOPE VARCHAR(4000),
@P_PART_CLS_ATTR PCS_SPEC_ATTR_VALUE readonly
I am using P_PART_CLS_ATTR as input where I can insert the data as attr_name and attr_value. I want to access each row of inserted values like row by row. I need take attribute name and value process them and return for inserting.. How to access the values in row by row?
I need removing cursor in my table valued function with alternate code.
ALTER FUNCTION [dbo].[eufn_e5_eSM_SE_GetCurrentContentForContainer]
(
@containerSqlId SMALLINT,
@containerIncId INT
)
RETURNS @Results TABLE
[Code] ....
My overarching goal is to generate sets of random Symptom records for each Enrollee in a drug study, so that for each cycle (period of time), the code will insert a random number of random records for each enrollee.
I'm trying to return a number of random records from a table, but inside a table-valued function... (which could be my problem).
CREATE FUNCTION dbo.ufn_GetTopSymptoms (
@enrollID INT
, @CTCVersion VARCHAR(20)
, @NumRecords INT
)
RETURNS TABLE
[Code] ....
But that ORDER BY NEWID() clause is illegal apparently, because here's the error it throws:
Msg 443, Level 16, State 1, Procedure ufn_GetTopSymptoms, Line 13
Invalid use of a side-effecting operator 'newid' within a function.
I was hoping I could return a set of enrollmentIDs and then use CROSS APPLY to generate a random set of records for each enrollmentID... is this not possible with APPLY? I was trying to avoid using a cursor...
The idea is basically to create all the Symptom records for all the patients in treatment cycle at once by using Enrollee OUTER APPLY dbo.ufn_GetTopSymtoms(dbo.Enrollment.EnrolleeID)
but that's clearly not working. Is there a way to do this without resorting to a cursor?
SELECT MAX(ID)
FROM [LinkedServer].[Database].dbo.[TableName] (NOLOCK)
WHERE <Condition>
The above SQL Script ran successfully up to yesterday. But today its throws the below error message.
Remote table-valued function calls are not allowed.
Now i have modified the SQL script as follows
SELECT MAX(ID)
FROM [LinkedServer].[Database].dbo.[TableName] WITH (NOLOCK)
WHERE <Condition>
I want to know how the 1st SQL script runs successfully up to yesterday.
Using the following:
SQL Server: SQL Server 2012
Visual Studio 2012
I have created an SSIS package where I have added an Execute SQL Task to run an existing stored procedure in my SQL database.
General:
Result Set: None
Connection Type: OLE DB
SourceType: Direct Input
IsQueryStoredProcedure: False (this is greyed out and cannot be changed)
Bypass Prepare: True
When I use the following execute statement where I am "Hard Coding" in the parameters, the stored procedure runs successfully and it places the data into the table per the stored procedure.
SQLStatement: dbo.sp_ml_location_load @system_cd='03', @location_type_cd=Store;
However, the @system_cd parameter can change, so I wanted to set these parameters up as variables and use the parameter mapping in the Execute SQL Task.
I have set this up as follows and it runs the package successfully but it does not put the data into the table. The only thing I can figure is either I have the variables set up incorrectly or the parameter mapping set up incorrectly.
Stored procedure variables:
ALTER PROCEDURE [dbo].[sp_ml_location_load]
(@system_cd nvarchar(10), @location_type_cd nvarchar(10))
AS
BEGIN .....................
Here is my set up, what is wrong here:
I Created these Variables:
Name Scope Data Type Value
system_cd Locations String '03'
location_type_cd Locations String Store
I added these parameter mappings in the Execute SQL Task
Variable Name Direction Data TypeParameter NameParameter Size
User::system_cd Input NVARCHAR@system_cd -1
User::location_type_cd Input NVARCHAR@location_type_cd -1
I used this SQLStatement: EXEC dbo.sp_ml_location_load ?,
It runs the package successfully but it does not put the data into the table.
What is the purpose of creating table variable and inserting data into it and selecting from table variable inside of stored proc?
Why can't the stored proc just have select statement instead of creating table variable?
I want to insert lots of data into two tables. For this I want to use table valued parameters and a stored procedure. So, what is the better way for best performance? Using two stored procedures or a single procedure with two parameters? How does SQL Server consume the data if I use a single procedure with two parameters. Is it really streaming the data? I mean, is SQL Server already starting to insert the first rows as soon as it gets it even if the client is still sending more and more rows and than the same with the next table?
e.g. I have a procedure like this:
CREATE PROCEDURE [dbo].[usp_UpdateElements] (
@tvpElementsToInsert As [dbo].[tvpElements] Readonly,
@tvpElementValuesToInsert As [dbo].[tvpElementValues] Readonly) AS
Begin
Insert Into Elements Select * From @tvpElementsToInsert;
Insert Into ElementValues Select * From @tvpElementValuesToInsert;
End
I have this SP
ALTER PROCEDURE GetDelayIntervalData(@start datetime, @stop datetime, @step int)
AS
DECLARE @steps bigint
SET @steps = DATEDIFF(hour, @start, @stop)/ @step
DECLARE @i bigint
SET @i=0
[Code] ....
I got some xml that is essentially an html table that I need to turn into a standard table resultset from a stored proc. If you take this xml and save it as html that is the desired resultset I am looking for. I realize the <td> tags repeat so I would just prefer 'col' + positional index for the col name. Keep in mind that <td> could be is 1 to n.
<table>
<tr>
<td>cell1</td>
<td>cell2</td>
<td>cell3</td>
[Code] .....
This is my attempt but I can't figure out how to get separate cols
declare @GridData xml = '<table><tr><td>cell1</td><td>cell2</td><td>cell3</td></tr><tr><td>cell4</td><td>cell5</td><td>cell6</td></tr><tr><td>cell7</td><td>cell8</td><td>cell8</td></tr></table>'
select T.C.value('.', 'nvarchar(max)')
from @GridData.nodes('//tr') T(C)
Using the following:
SQL Server: SQL Server 2012
Visual Studio 2012
I have created an SSIS package where I have added an Execute SQL Task to run an existing stored procedure in my SQL database.
General Tab:
Result Set: None
Connection Type: OLE DB
SourceType: Direct Input
IsQueryStoredProcedure: False (this is greyed out and cannot be changed)
Bypass Prepare: True
SQL Statement: EXEC FL_CUSTOM_sp_ml_location_load ?, ?;
Parameter Mapping:
Variable Name Direction Data Type Prmtr Name Prmtr Size
User: system_cd Input NVARCHAR 0 10
User: location_type_cd Input NVARCHAR 1 10
Variables:
location_type_cd - Data type - string; Value - Store (this is static)
system_cd - Data type - string - ??????
The system code changes based on the system field for each record in the load table
Sample Data:
SysStr # Str_Nm
3 7421Store1
3 7454Store2
1815061Store3
1815063Store4
1615064Store5
1615065Store6
1615066Store7
7725155Store8
STORED PROCEDURE: The stored procedure takes data from a load table and inserts it into another table:
Stored procedure variables:
ALTER PROCEDURE [dbo].[sp_ml_location_load]
(@system_cd nvarchar(10), @location_type_cd nvarchar(10))
AS
BEGIN .....................
This is an example of what I want to accomplish: I need to be able to group all system 3 records, then pass 3 as the parameter for system_cd, run the stored procedure for those records, then group all system 18 records, then pass 18 as the parameter for system_cd, run the stored procedure for those records and keep doing this for each different system in the table until all records are processed.
I am not sure how or if it can be done to pass the system parameter to the stored procedure based on the system # in the sys field of the data.
I have a stored procedure that I have written that manipulates date fields in order to produce certain reports. I would like to add a column in the dataset that will be a join from another table (the table name is Periods).
The structure of the periods table is as follows:
[ID] [int] NOT NULL,
[Period] [int] NULL,
[Quarter] [int] NULL,
[Year] [int] NULL,
[PeriodStarts] [date] NULL,
[PeriodEnds] [date] NULL
The stored procedure is currently:
USE [International_Forecast_New]
GO
/****** Object: StoredProcedure [dbo].[GetOpenResult] Script Date: 01/07/2014 11:41:35 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
[Code] ....
What I need is to add the period, quarter and year to the dataset based on the "Store_Open" value.
For example Period 2 looks like this
Period Quarter Year Period Start Period End
2 1 20142014-01-27 2014-02-23
So if the store_open value is 02/05/2014, it would populate Period 2, Quarter 1, Year 2014.
I have a need to insert stored procedure output a table and in addition to that add a datetimestamp column.. For example, Below is the process to get sp_who output into Table_Test table. But I want to add one additional column in Table_test table with datetimestamp when the procedure was executed.
insert into Table_Test execute sp_who
Using a string of IDs passed into a stored procedure as a VARCHAR parameter ('1,2,100,1020,') in an IN without parsing the list to a temp table or table variable. Here's the situation, I've got a stored procedure that is called all the time. It's working with some larger tables (100+ Million rows). The procedure passes in as one of the variables a list of IDs for the large table. This list can have anywhere from 1 to ~100 IDs passed to it.
Currently, we are using a function to parse the list of IDs into a temp table then joining the temp table to get the query:
CREATE PROCEDURE [dbo].[GetStuff] (
@IdList varchar(max)
)
AS
SET NOCOUNT ON
SET TRANSACTION ISOLATION LEVEL READ UNCOMMITTED
[Code] .....
The problem we're running into is that since this proc gets called so often, we sometimes run into tempDB contention that slows this down. In my testing (unfortunately I don't have a good way of generating a production load) swapping the #table for an @table didn't make any difference which makes sense to me given that they are both allocated in the tempDB. One approach that I tried was that since the SELECT query is pretty simple, I moved it to dynamic SQL:
CREATE PROCEDURE [dbo].[GetStuff] (
@IdList varchar(max)
)
AS
SET NOCOUNT ON
SET TRANSACTION ISOLATION LEVEL READ UNCOMMITTED
[Code] ....
The problem I had there, is that it creates an Ad Hoc plan for the query and only reuses it if the same list of parameters are passed in, so I get a higher CPU cost because it compiles a plan and it also causes the plan cache to bloat since the parameter list is almost always different. Is there an approach that I haven't considered that may get the best of both worlds, avoiding or minimizing tempDB contention but also not having to compile a new plan every time the proc is run?
I am trying to write a stored procedure that is an INSERT INTO <sql table> FROM <other sql tables> WHERE <where clause>.
I need to insert 3 columns from multiples SQL tables into one SQL table. Here is my code snippet:
ALTER PROCEDURE [dbo].[sp_insert_test]
@MID INT OUTPUT,
@CIDINT OUTPUT,
@MemberNVARCHAR OUTPUT
[Code] ....
i cannot pass any of the values to the tblVotings table and not sure how to enter the @MID, @CID and @Member to the INSERT INTO statement.
I need to create a Stored Procedure in SQL server which passes 6 input parameters Eg:
ALTER procedure [dbo].[sp_extract_Missing_Price]
@DisplayStart datetime,
@yearStart datetime,
@quarterStart datetime,
@monthStart datetime,
@index int
as
Once I declare the attributes I need to create a Temp table and update the data in it. Creating temp table
Once I have created the Temp table following query I need to run
SELECT date FROM #tempTable
WHERE #temp.date NOT IN (SELECT date FROM mytable WHERE mytable.date IN (list-of-input-attributes) and index = @index)
The above query might return null result or a date .
In case null return output as "DataNotMissing"
In case not null return date and string as "Datamissing"
table2 is intially populated (basically this will serve as historical table for view); temptable and table2 will are similar except that table2 has two extra columns which are insertdt and updatedt
process:
1. get data from an existing view and insert in temptable
2. truncate/delete contents of table1
3. insert data in table1 by comparing temptable vs table2 (values that exists in temptable but not in table2 will be inserted)
4. insert data in table2 which are not yet present (comparing ID in t2 and temptable)
5. UPDATE table2 whose field/column VALUE is not equal with temptable. (meaning UNMATCHED VALUE)
* for #5 if a value from table2 (historical table) has changed compared to temptable (new result of view) this must be updated as well as the updateddt field value.
I have a stored procedure and in that I will be calling a stored procedure. Now, based on the parameter value I will get stored procedure name to be executed. how to execute dynamic sp in a stored rocedure
at present it is like EXECUTE usp_print_list_full @ID, @TNumber, @ErrMsg OUTPUT
I want to do like EXECUTE @SpName @ID, @TNumber, @ErrMsg OUTPUT
Hi All,
I'm unable to run the report the report with multi-valued parameter using the below StoredProcedure as dataset:
CREATE PROCEDURE spprodsales
@productid int
AS
select SalesOrderID,OrderQty,UnitPrice,ProductID
FROM Sales.SalesOrderDetail
Where ProductID IN (@productid)
RETURN
And when I'm replacing this dataset to a query as below I'm able to run the report with multiple values selected for productid parameter :
select SalesOrderID,OrderQty,UnitPrice,ProductID
FROM Sales.SalesOrderDetail
Where ProductID IN (@productid)
So, can anyone please help me out possibly using the same stored procedure as above.
Thanks,
Kripa
Is there a way to combine 2 stored procedures with a different set off parameters.
Basically my 1st stored procedure has the following parameters:
1.@PlanID
2.@FinancialYearID
3.@RangetypeID
My second stored proc has the following:
1.@FinancialYearID
2.@IndicatorID
3.@VersionID
I have researched and so far nothing seems to be working. There is a conflict between the FinancialYearID of the 1st and 2nd stored procs.
My overall result is the combination of the 1st and 2nd storedprocs in 1.
I passed .net datatable from a .net app to a store procedure. From this store procedure, how to code to bulk insert (or another way) to SQL table?
View 7 Replies View RelatedI downloaded the sample reports for report execution from http://technet.microsoft.com/en-us/library/ms161561.aspx
to display reporting services report execution data which worked fine until I'd written a report with multi-valued parameters. As soon as this was designed and more importantly run by an user the package used to create the reports crashed.
I've found out why it's breaking mainly through digging around in the script task where the package crashes and also through surfing the net and finding this
https://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=967081&SiteID=1
thread. I've tried their fix but it still crashes unfortunately.
It seems like the issue is populating an array indexes in the script component in the update parameters data flow task. I think this was written to deal with minimal parameter requests, however I've recently written a multi-valued parameter report and it's made the string containing the parameter details has now hit the maximum length for the string. Changing the WSTR 4000 to a different size doesn't seem to have an effect, and the forum entry above doesn't hint at what the problem is apart from the script not being able to deal with the length.
The error I now get is as follows:
at MyComponent1.ScriptMain.Input0_ProcessInputRow(Input0Buffer Row) in dts://Scripts/MyComponent1/ScriptMain:line 35
at MyComponent1.UserComponent.Input0_ProcessInput(Input0Buffer Buffer) in dts://Scripts/MyComponent1/ComponentWrapper:line 68
at MyComponent1.UserComponent.ProcessInput(Int32 InputID, PipelineBuffer Buffer) in dts://Scripts/MyComponent1/ComponentWrapper:line 25
at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.ProcessInput(Int32 inputID, PipelineBuffer buffer)
Anyone have any ideas on how to fix this?
Hi,
I am having 2 tables. One is main table and another is history table. Whenever I update the main table, I need to insert the all the main table data to History table, before updating the main table.
Overall it is like storing the history of the table updation.
How do i write a stored procedure for this?
Anybody has done this before?
Pls help me.