I am having one store procedure which use to load data from flat file to staging table dynamically. everything is working fine.Staging_temp table have single column.All the data stored in that single column below is the sample Data.
AB¯ALBERTA ¯93¯AI
AI¯ALBERTA INDIRECT ¯94¯AI
AL¯ALABAMA ¯30¯
[Code]....
where including/excluding a single column in an empty staging table would influence a resultset returning from distributed query? Both servers are SQL Server 2012. Nothing special about the staging table. It contains 12 columns with a mixture of INT and NVARCHAR(256) columns. In one case I exclude the column and the query returns in 17 seconds. When I include it the query does not return. Excluding the INSERT INTO the staging table and query returns in 17 secs with and without the column.
View 3 Replies View RelatedI am having one store procedure which use to load data from flat file to staging table dynamically.
Everything is working fine.staging_temp table have single column. All the data stored in that single column. below is the sample row.
AB¯ALBERTA ¯93¯AI
AI¯ALBERTA INDIRECT ¯94¯AI
AL¯ALABAMA ¯30¯
After the staging_temp data gets inserted into main table.my probelm is to handle such a file where number of columns are more than the actual table.
If you see the sample rows there are 4 column separated by "¯".but actual I am having only 3 columns in my main table.so how can I get only first 3 column from the satging_temp table.
Output should be like below.
AB¯ALBERTA ¯93
AI¯ALBERTA INDIRECT ¯94
AL¯ALABAMA ¯30
How to achieve above scenario...
What is the best way to transfer data from the staging table into the main table.
Example:
Staging Table Name: TableA_satge (# of rows - millions)
Main Table Name: TableA_main (# of rows - billions)
Note: Staging table may have some data same as the main table.
Currently I am doing:
- Load data into staging table (TableA_stage)
- Remove any duplication of rows from the staging table (TableA_stage)
- Disable all indexes on main table (TableA_main)
- Insert into main table (TableA_main) from staging table (TableA_stage)
- Remove any duplication of rows from the main table using CTE (TableA_main)
- Rebuild indexes on main_table (TableA_main)
The problem with the above method is that, it takes a lot of time and log file size grows very big.
We are designing a Staging layer to handle incremental load. I want to start with a simple scenario to design the staging.
In the source database There are two tables ex, tbl_Department, tbl_Employee. Both this table is loading a single table at destination database ex, tbl_EmployeRecord.
The query which is loading tbl_EmployeRecord is, SELECT EMPID,EMPNAME,DEPTNAME FROM tbl_Department D INNER JOIN tbl_Employee E ON D.DEPARTMENTID=E.DEPARTMENTID.
Now, we need to identify incremental load in tbl_Department, tbl_Employee and store it in staging and load only the incremental load to the destination.
The columns of the tables are,
tbl_Department : DEPARTMENTID,DEPTNAME
tbl_Employee : EMPID,EMPNAME,DEPARTMENTID
tbl_EmployeRecord : EMPID,EMPNAME,DEPTNAME
How to design the staging for this to handle Insert, Update and Delete.
How can i get the total number of each distinct value in the column and write it to another table e.g.
MyTable
Id Fruit
1 Apple
2 Banana
3 Apple
4 Watermelon
5 Banana
6 Watermelon
7 Apple
Result
Fruit Count
Apple 3
Banana 2
Watermelon 2
I'm attempting to load some data into an explicit hierarchy in MDS 2012 via the staging table and struggling with the HierarchyName field. Specifically I'm loading data into stg.[Entity Name]_Consolidated and using the exact name of the explicit hierarchy I've set up in the front end web application.
Originally my hierarchy was labelled "Reporting Hierarchy" and when loading the data into staging using this name then running the batch from the Import Data screen I can see the error message "Error - The HierarchyName is missing or is not valid.". I've checked the table mdm.tblHierarchy and can see that the name there is exactly as it was in the staging table and have since renamed the hierarchy as "Reporting_Hierarchy" with the same results.
In my ETL job I would like to truncate stg table but before truncating stging table, I want to make sure that all the records are inserted in the data model. The sample is as below
create table #stg (
CreateID int,
Name nvarchar(10)
)
insert into #stg
select 1, 'a' union all
select 2, 'b' union all
[Code] ....
How can I check among these tables and make sure that all values are loaded into the data model and the staging table can be truncated.
I'm trying to use Excel in SSIS to import the data from spreadsheet to a staging table. The package runs well from the web server using SSMS. But when I deploy and try to execute the package, I'm getting the below error. I've a question, whether I've to install the AccessDatabaseEngine driver in SQL database server or the web server where I'm executing the SSIS?
Error: The requested OLE DB provider Microsoft.Jet.OLEDB.4.0 is not registered. If the 64-bit driver is not installed, run the package in 32-bit mode.
I have been working on this without any success. Anybody out there to help?
1. There are new files uploaded in the FTP site everyday by other regions. 3 regions and 1 file each. That means 3 files at 3 different times. The file name will be that same day's date.csv. Example; today's file will be A_20071106.csv , B_20071106.csv and C_20071106.csv. Tomorrow's will be A_20071107.csv,B_20071107.csv and C_20071107.csv. How do I do this to run everyday and take the file only for that day from FTP straight into SQL Staging table?
2. Everyday, immediately after each file is uploaded, to indicate the FTP file is loaded successfully, there will be a 20071106.dummy and so on for all three files will show up on the same folder in FTP. I must make this package runable only if the .done file arrives for that days date and then execute the .csv file. Otherwise check after 30 minutes if the .dummy is there yet or not. Do this until the .dummy file comes. Then execute the package that is on that time. Then do the same for the other two for that particular day. The times are 4pm for A, 6pm for B and 8.30pm for C
3. Then, if there is a new row, it should INSERT, any changes (based on 5 columns), it should update and if there was a row yesterday and it is not there today, DELETE.
4. All this must be automated.
Hi all,
I am passing flat file source as a variable to Dtexec Utility. (like package.variables[User::varFileName].Value;"D:sourcedata.txt).
Destination table is having one more column.
I want to add custom value in that column at run time by parameter to Dtexec(User::varDate)
I dont know how to do it, please help me.
Madhukar
I am working on an HR project and I have one final component that I am stuck on.
I have an Excel File that is loaded into a folder every month.
I have built a package that captures the data from the excel file and loads it into a staging table (transforming a few bits of data).
I then combine it with another table in a view.
I have another package that loads that view into a Master table and I have added a Slowly Changing Dimension so that it only updates what has been changed. (it’s a table of all employees, positions, hire dates, term dates etc).
Our HR wants to have this data in a report (with charts and tables) and they wanted it to be in a familiar format. So I made a data connection with Excel loading the data into a series of pivot tables.
I have one final component that i cant seem to figure out. At the end of every year I need to capture a count of all Active Employees and all Termed employees for that year. Just a count.
So the data will look like this.
|Year|HistoricalHC|NumbTermedEmp|
|2010|447 |57 |
|2011|419 |67 |
|2012|420 |51 |
The data is in one table labeled [EEMaster]. To test the count I have the following.
SELECT COUNT([PersNo]) AS HistoricalHC
FROM [dbo].[EEMaster]
WHERE [ChangeStatus] = 'Current' AND [EmpStatusName] = 'Active'
this returns the HistoricalHC for 2013 as 418.
SELECT COUNT([PersNo]) AS NumbOfTermEE
FROM [dbo].[EEMaster]
WHERE [ChangeStatus] = 'Current' AND [EmpStatusName] = 'Withdrawn' AND [TermYear] = '2013'
This returns the Number of Termed employees for 2013 as 42.
I have created a table to report from called [dbo.TORateFY] that I have manually entered previous years data into.
|Year|HistoricalHC|NumbTermedEmp|
|2010|447 |57 |
|2011|419 |67 |
|2012|420 |51 |
I need a script (or possibly a couple of scripts) that will add the numbers every year with the year that the data came from.
(so on Dec 31st this package will run and add |2013|418|42| to the next row, and so on.
I'm using SQL Server 2012 and I need to run a query against my database that will output the difference between 2 dates (namely, DateOfArrival and DateOfDeparture) into the correct month column in the output.
Both DateOfArrival and DateOfDeparture are in the same table (let's say GuestStay). I will also need some other fields from this table and do some joins on some other tables but I will simplify things so as to solve my main problem here. Let's say the fields needed from the GuestStay table looks like below:
I need my query to output in the following format:
How to write this query?
I am trying to insert bulk data into main table from staging table in sql server 2012. If any error comes, this total activity is rollbacked. I don't want that to happen. I want to know the records where ever the problem persists, and the rest has to be inserted.
View 2 Replies View RelatedI got a sales cost and cost amount table for my budget. the sales cost table is getting updated with FOBB items which makes the total incorrect . the FOBB values needs to be moved from the sales cost column to the cost amount column. how can i do it with an SQL script.
View 1 Replies View RelatedA column of a table has values in the format - 35106;#Grandbouche-Cropp, Amy.
I need to format the column data in such a way that only the text after # (Grandbouche-Cropp, Amy) remain in the column.
The text before ;# (35106) should be inserted in to another column of the same table.
Below is the table structure:
create table [HR_DEV_DM].[CFQ_TEST].sp_CFQ_Commercial_Referrals
(
ID int identity,
PromotionalCode nvarchar(4000),
QuoteNumber nvarchar(100),
CreatedBy nvarchar(100),
Created datetime,
ModifiedBy nvarchar(100),
Modified datetime,
CreatedBy_SalesRepSharePointID int,
ModifiedBy_ModBySharePointID int
)
I have to create a table like this across a bunch of servers. I'm thinking that I'm overlooking something with needing two additional CTEs, but maybe not. I have it at 17 seconds, which isn't much faster than a while loop solution that's currently in place.
DECLARE @START DATETIME,
@msg NVARCHAR(MAX) = N''
USE tempdb
SELECT @START = GETDATE()
CREATE TABLE dbo.EulerSource ( [SID] INT, Euler BIGINT )
[Code] ....
I need find out the number of columns in flat file before i process that particular file.I have file name in @filename variable and file path is @filepath variable.But do not not that how i will check the column name in before i will process that file.
@filePath = C:DatabaseSourceFilesCAHCVSSourceFiles
And i am using for each loop container to read the file one by one and put the file name in @filename variable.and my file name like
Product_20120607060930.txt
Product_20130708060930.txt
[code]....
Now what i have to do is i need to make sure that ID,Name,City,County,Phone is there in flat file.if it is not there then i have to send mail to client saying that file is not valid.I need to also calculate the size of flat file.
I have a table with PO#,Days_to_travel, and Days_warehouse fields. I take the distinct Days_in_warehouse values in the table and insert them into a temp table. I want a script that will insert all of the values in the Days_in_warehouse field from the temp table into the Days_in_warehouse_batch row in table 1 by PO# duplicating the PO records until all of the POs have a record per distinct value.
Example:
Temp table: (Contains only one field with all distinct values in table 1)
Days_in_warehouse
20
30
40
Table 1 :
PO# Days_to_travel Days_in_warehouse Days_in_warehouse_batch
1 10 20
2 5 30
3 7 40
Updated Table 1:
PO# Days_to_travel Days_in_warehouse Days_in_warehouse_batch
1 10 20 20
1 10 20 30
1 10 20 40
2 5 30 20
2 5 30 30
2 5 30 40
3 7 40 20
3 7 40 30
3 7 40 40
How can I update Table 1 to see desired results?
I have four columns in my table, the first one is the identity column
col1 Col1 col2 col3
1 12 1 This is Test1
2 12 2 This is Test1
3 12 3 This is Test3
4 12 4 This is Test4
5 12 5 @@@@@
When, I see, @@@ sign in my col4, I need to restart the col3 from 1 again so it will look like this
col1 Col2 col3 col4
1 12 1 This is Test1
2 12 2 This is Test1
3 12 3 This is Test3
4 12 4 This is Test4
5 12 5 @@@@@
6 12 1 This is another test1
7 12 2 This is another Test2
Is it possible to do that?
Hi,
I am trying to create a program that transfers tables to flat files.
At this point in time, I have suceeded in created one that creates delimited files.
However, I am now trying to create fixed-width files as you can do with the SSIS designer, but programatically.
Is there a way to programatically determine the width of a column from the source table? I can not seem to find any kind of function or member that stores this information or allows me to retrieve it.
I know what I need to change in order to set a width for a column, but I just don't know how to find the width without just asking the user to provide one.
I am writing a package that will process delimited flat files that will come in one of a few different versions. Within each flat file, the number of delimited columns will be the same, but each version of the file has a different number of columns. I have tried configuring the flat file data source to expect the version with the largest number of columns, but it will then throw away rows that have less than this number of columns (warning: There is a partial row at the end of the file).
Is it possible to use a single flat file data source that will work with all of the different width files?
Hi everyone,
I am using SSIS, and I got the folowing error, I am loading several CSV files in a OLE DB, Becasuse the file is finishing and the tak dont realize of the anormal termination, making an overflow.
So basically what i want is to control the anormal ending of the csv file.
please can anyone help me ???
I am getting the following error after replacing the '""' with '|'.
The replacng is done becasue some text sting contains "" wherein the DFT was throwing an error as " The column delimiter could not foun".
[Flat File Source [8885]] Error: The column data for column "CountryId" overflowed the disk I/O buffer.
[Flat File Source [8885]] Error: An error occurred while skipping data rows.
[DTS.Pipeline] Error: The PrimeOutput method on component "Flat File Source" (8885) returned error code 0xC0202091. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
[DTS.Pipeline] Error: Thread "SourceThread0" has exited with error code 0xC0047038.
[DTS.Pipeline] Error: Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
[DTS.Pipeline] Error: Thread "WorkThread0" has exited with error code 0xC0047039.
[DTS.Pipeline] Information: Post Execute phase is beginning.
apprecite for immediate response.
Thanks in advance,
Anand
Warning: 0x80019002 at STAGING: The Execution method succeeded, but the number of errors raised (14) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
i got this error in my ssis package, where i'm trying to export flat file data into oledb destination,
can anyone help me to fix this issue!!!
What i've done?
1. Data Flow Task
a. po.txt flat file Source
b. Derived column
c. Oledb destination
a. pend.txt Flat file Source
b. Derived column
c. Oledb destination
a. invoice.txt Flat file Source
b. Derived column
c. Oledb destination
i did three flows in a single data flow task; among that one flow is running (po.txt flow) the rest are returned with Red Box filled error, and i capture the error and pasted there!!
the full error message is...... what i got in my output window is follows
i need some guidence to solve this issue, please let me know if you know about this stuff.
Information: 0x40016041 at STAGING: The package is attempting to configure from the XML file "staging.dtsConfig".
Warning: 0x80012014 at STAGING: The configuration file "staging.dtsConfig" cannot be found. Check the directory and file name.
Warning: 0x80012059 at STAGING: Failed to load at least one of the configuration entries for the package. Check configurations entries and previous warnings to see descriptions of which configuration failed.
SSIS package "STAGING.dtsx" starting.
Information: 0x4004300A at Staging Table Loading Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Warning: 0x80047076 at Staging Table Loading Data Flow Task, DTS.Pipeline: The output column "Description" (3223) on output "Flat File Source Output" (3161) and component "Invoice Raised Flat File Source" (3160) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at Staging Table Loading Data Flow Task, DTS.Pipeline: The output column "Project Number" (3080) on output "Flat File Source Output" (3063) and component "Pending Files Flat File Source" (3062) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Information: 0x4004300A at Staging Table Loading Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Warning: 0x80047076 at Staging Table Loading Data Flow Task, DTS.Pipeline: The output column "Description" (3223) on output "Flat File Source Output" (3161) and component "Invoice Raised Flat File Source" (3160) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at Staging Table Loading Data Flow Task, DTS.Pipeline: The output column "Project Number" (3080) on output "Flat File Source Output" (3063) and component "Pending Files Flat File Source" (3062) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Information: 0x40043006 at Staging Table Loading Data Flow Task, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at Staging Table Loading Data Flow Task, DTS.Pipeline: Pre-Execute phase is beginning.
Information: 0x402090DC at Staging Table Loading Data Flow Task, PO Pending Flat File Source [2344]: The processing of file "C:Documents and Settingse402076Desktopitss flat filespo_pending.txt" has started.
Information: 0x402090DC at Staging Table Loading Data Flow Task, Pending Files Flat File Source [3062]: The processing of file "C:Documents and Settingse402076Desktopitss flat filespending bills.txt" has started.
Information: 0x402090DC at Staging Table Loading Data Flow Task, Invoice Raised Flat File Source [3160]: The processing of file "C:Documents and Settingse402076Desktopitss flat filesinvoices_raised.txt" has started.
Information: 0x4004300C at Staging Table Loading Data Flow Task, DTS.Pipeline: Execute phase is beginning.
Error: 0xC02020A1 at Staging Table Loading Data Flow Task, Invoice Raised Flat File Source [3160]: Data conversion failed. The data conversion for column "Description" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.".
Error: 0xC02020A1 at Staging Table Loading Data Flow Task, Pending Files Flat File Source [3062]: Data conversion failed. The data conversion for column "Event Description" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.".
Information: 0x402090DE at Staging Table Loading Data Flow Task, PO Pending Flat File Source [2344]: The total number of data rows processed for file "C:Documents and Settingse402076Desktopitss flat filespo_pending.txt" is 76.
Error: 0xC020902A at Staging Table Loading Data Flow Task, Pending Files Flat File Source [3062]: The "output column "Event Description" (3095)" failed because truncation occurred, and the truncation row disposition on "output column "Event Description" (3095)" specifies failure on truncation. A truncation error occurred on the specified object of the specified component.
Error: 0xC020902A at Staging Table Loading Data Flow Task, Invoice Raised Flat File Source [3160]: The "output column "Description" (3223)" failed because truncation occurred, and the truncation row disposition on "output column "Description" (3223)" specifies failure on truncation. A truncation error occurred on the specified object of the specified component.
Error: 0xC0202092 at Staging Table Loading Data Flow Task, Pending Files Flat File Source [3062]: An error occurred while processing file "C:Documents and Settingse402076Desktopitss flat filespending bills.txt" on data row 10.
Error: 0xC0202092 at Staging Table Loading Data Flow Task, Invoice Raised Flat File Source [3160]: An error occurred while processing file "C:Documents and Settingse402076Desktopitss flat filesinvoices_raised.txt" on data row 5.
Error: 0xC0047038 at Staging Table Loading Data Flow Task, DTS.Pipeline: The PrimeOutput method on component "Pending Files Flat File Source" (3062) returned error code 0xC0202092. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
Error: 0xC0047038 at Staging Table Loading Data Flow Task, DTS.Pipeline: The PrimeOutput method on component "Invoice Raised Flat File Source" (3160) returned error code 0xC0202092. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
Error: 0xC0047021 at Staging Table Loading Data Flow Task, DTS.Pipeline: Thread "SourceThread2" has exited with error code 0xC0047038.
Error: 0xC0047039 at Staging Table Loading Data Flow Task, DTS.Pipeline: Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047021 at Staging Table Loading Data Flow Task, DTS.Pipeline: Thread "WorkThread0" has exited with error code 0xC0047039.
Error: 0xC0047021 at Staging Table Loading Data Flow Task, DTS.Pipeline: Thread "SourceThread0" has exited with error code 0xC0047038.
Error: 0xC0047039 at Staging Table Loading Data Flow Task, DTS.Pipeline: Thread "WorkThread2" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047021 at Staging Table Loading Data Flow Task, DTS.Pipeline: Thread "WorkThread2" has exited with error code 0xC0047039.
Information: 0x402090DF at Staging Table Loading Data Flow Task, PO_PENDING_STG OLE DB Destination [587]: The final commit for the data insertion has started.
Information: 0x402090E0 at Staging Table Loading Data Flow Task, PO_PENDING_STG OLE DB Destination [587]: The final commit for the data insertion has ended.
Information: 0x40043008 at Staging Table Loading Data Flow Task, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x402090DF at Staging Table Loading Data Flow Task, INVOICE_STG OLE DB Destination [247]: The final commit for the data insertion has started.
Information: 0x402090E0 at Staging Table Loading Data Flow Task, INVOICE_STG OLE DB Destination [247]: The final commit for the data insertion has ended.
Information: 0x402090DF at Staging Table Loading Data Flow Task, OLE DB Destination [933]: The final commit for the data insertion has started.
Information: 0x402090E0 at Staging Table Loading Data Flow Task, OLE DB Destination [933]: The final commit for the data insertion has ended.
Information: 0x402090DD at Staging Table Loading Data Flow Task, PO Pending Flat File Source [2344]: The processing of file "C:Documents and Settingse402076Desktopitss flat filespo_pending.txt" has ended.
Information: 0x402090DD at Staging Table Loading Data Flow Task, Pending Files Flat File Source [3062]: The processing of file "C:Documents and Settingse402076Desktopitss flat filespending bills.txt" has ended.
Information: 0x402090DD at Staging Table Loading Data Flow Task, Invoice Raised Flat File Source [3160]: The processing of file "C:Documents and Settingse402076Desktopitss flat filesinvoices_raised.txt" has ended.
Information: 0x40043009 at Staging Table Loading Data Flow Task, DTS.Pipeline: Cleanup phase is beginning.
Information: 0x4004300B at Staging Table Loading Data Flow Task, DTS.Pipeline: "component "PO_PENDING_STG OLE DB Destination" (587)" wrote 75 rows.
Information: 0x4004300B at Staging Table Loading Data Flow Task, DTS.Pipeline: "component "OLE DB Destination" (933)" wrote 0 rows.
Information: 0x4004300B at Staging Table Loading Data Flow Task, DTS.Pipeline: "component "INVOICE_STG OLE DB Destination" (247)" wrote 0 rows.
Task failed: Staging Table Loading Data Flow Task
Warning: 0x80019002 at STAGING: The Execution method succeeded, but the number of errors raised (14) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "STAGING.dtsx" finished: Failure.
The program '[2532] STAGING.dtsx: DTS' has exited with code 0 (0x0).
I am trying to use a stored procedure to update a column in a sql table using the value from a variable table I getting errors because my syntax is not correct. I think table aliases are not allowed in UPDATE statements.
This is my statement:
UPDATE [dbo].[sessions_teams] stc
SET stc.[Talks] = fmt.found_talks_type
FROM @Find_Missing_Talks fmt
WHERE stc.sessionid IN (SELECT sessionid FROM @Find_Missing_Talks)
AND stc.coupleid IN (SELECT coupleid FROM @Find_Missing_Talks)
Add sno 1 to end of the coloum
I have table like ...
400000 laks rows in my table
name address id location
raju hyd 6789 hyd
vamshi vizag 9876 hashinapur
o/p like
I want insert sno coloum and sno 1 to 400000
sno name address id location
1 raju hyd 6789 hyd
2 vamshi vizag 9876 hasthinapur
3
4
5
6
..
.
.
.
.
40000
my table payment_details structure is
payment_id payment_code
1 null
2 null
3 null
4 null
here payment_id is a primary key and i need to update the whole payment_id column to payment_code column.so i just tried the below query
update payment_details
set payment_code = payment_no
where payment_code is null
but it shows subquery error?
I am writing a query to update table variable. It is throwing me some error.
I have a table variable declared and inserted the data with three columns. I want to update col1 of that table variable when the second column of that table variable= one column from a physical table
update @MYtabvar set @Mytabvar.LatestDate=B.LatestDate from TableB B where @Mytabvar.id=B.ID
I want to convert all the column of table to ToBase64String.
Public Class ScriptMain
Inherits UserComponent
Dim md5 As MD5CryptoServiceProvider = New MD5CryptoServiceProvider()
Public Overrides Sub Input0_ProcessInputRow(ByVal Row As Input0Buffer)
Dim columnContents As Byte() = UnicodeEncoding.Unicode.GetBytes(Row.Col001 + Row.Col002 + Row.Col003 + Row.Col004 + Row.Col005 + Row.Col006 + Row.Col007 + Row.Col008 + Row.Col009 + Row.Col010 + Row.Col011 + Row.Col012 + Row.Col013 + Row.Col014)
Dim hash As Byte() = md5.ComputeHash(columnContents)
Dim hashString As String = Convert.ToBase64String(hash, Base64FormattingOptions.None)
Row.RowChecksum = hashString
End Sub
End Class
I have a situation that I need to add a field to a table over linked server. The specifications of this is dynamic and it is being done in TQL / Stored procedures and this can not change. My code is generating the statement just fine and if I copy paste it to a new SSMS window and execute it WORKS.. The problem is I need to dynamically generate the statement (I am doing that just fine, I THINK). THEN I need to execute the statement IN THE SPROC, this part is not working.
Here is the code:
SET @AlterSQL = @DestinationServerName + '.[' + @DestinationDBName +'].' + @DestinationSchemaName + '.sp_executesql N'' ALTER TABLE '
+ @DestinationTableName + ' ADD ' + @TempColumn + ' int' + CHAR(39)
The above Creates this when I expose it via a PRINT statement:
addb15.[FSParallel].dbo.sp_executesql N' ALTER TABLE Node ADD ImportIdentity int'
After I create the statement I use:
EXEC @AlterSQL
And this returns the following error:
Msg 2812, Level 16, State 62, Procedure ETLDynamicImport, Line 244
Could not find stored procedure 'FSParallel.dbo.sp_executesql N' ALTER TABLE Node ADD ImportIdentity int''.
<hr noshade size='1' width='250' color='#BBC8E5'>
How to add a primary key for existing column in the table
View 8 Replies View RelatedI have a FileTable as part of an application that a client uses. In general the response of the SQL Server has been great. However, they have started to make use of a part of the application that handles images. The application has a FileTable set up. However, there is a Stored Procedure that retrieves the path of the requested file. It is taking the Server over two seconds to return a single file path.
USE [BMIPictureDB]
GO
/****** Object: StoredProcedure [dbo].[GetFileTablePath] Script Date: 8/31/2015 6:07:37 AM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[GetFileTablePath]
[Code] ....
I've changed the width of a column from 128 to 64. How to EM shows 64, while sysobjects and sp_help show 128 ?? Even after disconnecting and re-connecting (just to be extra sure).
View 2 Replies View Related