SQL Server 2012 :: Query Result For Sequential Range
Aug 9, 2014
I wanted to know the best way to achieve the following results. I have a table that I need output sequential range of vouchers in a table. For instance I have the following data in a column called vouchers. The output will consist of a years worth of vouchers, so voucher numbers may contain gaps and so the need to have a sequential range that has a From and To output. The query needs to know the min and max within that numerical range and then output the next min and max range until it gets to the end.
The data looks like:
ABCD-001869202
ABCD-001869203
ABCD-001869204
ABCD-001869205
ABCD-001869209
ABCD-0018692010
ABCD-0018692011
ABCD-001869309
ABCD-001869310
ABCD-001869311
ABCD-001869312
ABCD-001869313
ABCD-001869314
Desired out put:
From To
ABCD-001869202 ABCD-001869205
ABCD-001869209 ABCD-0018692011
ABCD-001869309 ABCD-001869314
I have tried the following, but it does not quite do what I need it to do, so not sure if I am taking the right approach:
SELECT voucher vouchers,right(voucher, charindex('-', voucher) + 3) voucher
INTO #tempVoucher
FROM LEDGERJOURNALTRANS
where TRANSDATE between '10/1/2013' and '7/31/2014' and VOUCHER like 'APIN%'
[Code] ...
View 6 Replies
ADVERTISEMENT
Dec 12, 2014
I have a table that stores Terminal ID, Product Name, Cost and Effective Date. I need to generate query that will produce record set with start effective date and end date based on terminal and product. Table has over million records. In example below you could see table structure/data and desired outcome.
SELECT fmc_terminal, fmc_date = CAST(d. fmc_date AS DATETIME)
,d.fmc_prodlnk, d. fmc_cost
INTO #TestTable
FROM (
SELECT 1, '2014-12-03 00:04:00.000','A', 2.25 UNION ALL
[Code] ....
Expected outcome
fmc_terminalfmc_prodlnkfmc_cost StartDateEndDate
1A2.25 NULL2014-12-03 00:04:00.000
1A2.26 2014-12-03 00:04:00.0002014-12-03 11:33:00.000
And so on….
View 4 Replies
View Related
Oct 7, 2007
I have two tables
1. Po (Purchase Order)
2. PoDet (PoDetails)
Po Table is having a datatime field called "ShipDate", OrderNo and a field called PoNo (which is having number of PO).
PoDet is child table having PoNo and PoQty
Suppose following records are in both tables
Po:-
OrderNo : 1
PoNo :- Po No 1
ShipDate :- Oct 5, 2007
OrderNo : 1
PoNo :- Po No 2
ShipDate :- Dec 5, 2007
OrderNo : 1
PoNo :- Po No 3
ShipDate :- Oct 5, 2007
PoDet:
PoNo :- Po No 1
PoQty :- 2000
PoNo :- Po No 2
PoQty :- 3000
PoNo :- Po No 3
PoQty :- 4000
I want to generate a Delivery No. which will be generated in this way :-
1. Earlier Shipdates should be assigned a Lower Number
2. If Shipdates are same, like in case of PoNo 1 and PoNo3, the higher Qty will be assigned a lower number
So meeting the above two conditions, a single SQL should return
PoNo :- Po No 3
DelNo : 1 (As Dates are same for PoNo1 and PoNo3 but PoNo3 Qty is higher, so this will come first)
PoNo :- Po No 1
DelNo : 2
PoNo :- Po No 2
DelNo : 3
Can anybody help on this.
View 4 Replies
View Related
Mar 20, 2015
I have a query which provides the below result set:
1165 6
1,173.0013
9740 6
9820 13
2271 6
2287 13
10,952.006
11,029.0013
4,074.006
4,103.0013
I want to achieve something like below. It should subtract the '13' row to '6' row and provide another column with the result. the '6' and '13' category code share the same Key.
1165 6 -8.00
1,173.0013-8.00
9740 6 -80
9820 13 -80
[code]...
View 5 Replies
View Related
Jan 23, 2015
I have to write a Stired Procedure with the following functionality.
Write a simple select query say (Select * from tableA) result is
ProdName ProdID
----------------------
ProdA 1
ProdB 2
ProdC 3
ProdD 4
Now with the above result, On every record I have to fire a query Select SUM(sale), SUM(scrap), SUM(Production) from tableB where ProdID= ["ProdID from above query"].How to write this query in a Stored Procedure so that I can get the required SUM columns for all the ProdID's from first query?
View 2 Replies
View Related
May 25, 2015
Here the SELECT query is fetching the records corresponding to ITEM_DESCRIPTION in 5 separate transactions. How to change the cursor to display the 5 records in at a time in single transactions.
CREATE TABLE #ITEMS (ITEM_ID uniqueidentifier NOT NULL, ITEM_DESCRIPTION VARCHAR(250) NOT NULL)INSERT INTO #ITEMSVALUES(NEWID(), 'This is a wonderful car'),(NEWID(), 'This is a fast bike'),(NEWID(), 'This is a expensive aeroplane'),(NEWID(), 'This is a cheap bicycle'),(NEWID(), 'This is a dream holiday')
---
DECLARE @ITEM_ID uniqueidentifier
DECLARE ITEM_CURSOR CURSOR
[Code] ....
View 1 Replies
View Related
Jul 27, 2015
I have a table with dates and values and other columns. In a proc i need to get the result as Month and the values for all the months whether or not the data exists for the month.
The Similar table would be-
create table testing(
DepDate datetime,
val int)
insert into testing values ('2014-01-10 00:00:00.000', 1)
insert into testing values ('2014-05-19 00:00:00.000', 10)
insert into testing values ('2014-08-15 00:00:00.000', 20)
insert into testing values ('2014-11-20 00:00:00.000', 30)
But in result i want the table as -
Month Value
Jan1
Febnull
Marnull
Aprnull
May10
Junnull
Julnull
Aug20
Sepnull
Octnull
Nov30
Decnull
View 9 Replies
View Related
Jul 15, 2015
I'm struggling to modify the T-SQL query below to return the results as XML.
SELECT ProductModelID, Name
FROM Production.ProductModel
WHERE ProductModelID IN (119, 122);
The XML result document should have the following structure:
<Root>
<ProductModelData id="119">
<Name>Bike Wash</Name>
</ProductModelData>
<ProductModelData id="122">
<Name>All-Purpose Bike Stand</Name>
</ProductModelData>
</Root>
View 2 Replies
View Related
Apr 6, 2015
I have 2 tables, one is table A which stores Resources Assign to work for a certain period. The structure is as below
Name StartDate EndDate
Tan 2015-04-01 08:30:00.000 2015-04-01 16:30:00.000
Max 2015-04-01 08:30:00.000 2015-04-01 16:30:00.000
Alan 2015-04-01 16:30:00.000 2015-04-02 00:30:00.000
The table B stores the item process time. The structure is as below
Item ProcessStartDate ProcessEndDate
V 2015-04-01 09:30:10.000 2015-04-01 09:34:45.000
Q 2015-04-01 10:39:01.000 2015-04-01 10:41:11.000
W 2015-04-01 11:44:00.000 2015-04-01 11:46:25.000
A 2015-04-01 16:40:10.000 2015-04-01 16:42:45.000
B 2015-04-01 16:43:01.000 2015-04-01 16:45:11.000
C 2015-04-01 16:47:00.000 2015-04-01 16:49:25.000
I need to select the item which process in 2015-04-01 16:40:00 and 2015-04-01 17:30:00. Beside that I need to know how many resource is assigned to process the item in that period of time. I only has the start date is 2015-04-01 16:40:00 and end date is 2015-04-01 17:30:00. How I can select the data from both tables. There is no need for JOIN, just seperate selections.
Another item process time is in 2015-04-01 10:00:00 and 2015-04-04 11:50:59.
The result expected is
Table A
Name StartDate EndDate
Alan 2015-04-01 16:30:00.000 2015-04-02 00:30:00.000
Table B
Item ProcessStartDate ProcessEndDate
A 2015-04-01 16:30:10.000 2015-04-01 16:32:45.000
B 2015-04-01 16:33:01.000 2015-04-01 16:35:11.000
C 2015-04-01 16:37:00.000 2015-04-02 16:39:25.000
Scenario 2 expected result
Table A
Name StartDate EndDate
Tan 2015-04-01 08:30:00.000 2015-04-01 16:30:00.000
Max 2015-04-01 08:30:00.000 2015-04-01 16:30:00.000
Table B
Item ProcessStartDate ProcessEndDate
Q 2015-04-01 10:39:01.000 2015-04-01 10:41:11.000
W 2015-04-01 11:44:00.000 2015-04-01 11:46:25.000
View 8 Replies
View Related
Jun 27, 2014
I would like changing the date range to be -1 year from today until today
This is the current WHERE, AND
WHERE [entry].[Posting Date] >= DATEADD(YEAR, YEAR(GETDATE()) - 1900, 0)
AND [entry].[Posting Date] < DATEADD(YEAR, YEAR(GETDATE()) - 1899, 0)
View 2 Replies
View Related
Feb 3, 2015
I have some location assignment data that I need to convert. I need to know how long each account spent in a certain location for each month of it's overall startdate/enddate period.
E.g.
Account 1 stayed in USA for 31 days in January, and 15 days in February.
Account 1 stayed in UK for 13 days in February and 26 days in March.
Etc.
create table #temp(account int, loc varchar(10), startdate datetime, enddate datetime)
insert into #temp select 1,'USA','2014-01-01','2014-02-15'
insert into #temp select 1,'UK','2014-02-16','2014-03-26'
insert into #temp select 1,'AU','2014-03-27','2014-06-07'
insert into #temp select 2,'UK','2014-08-15','2014-09-01'
insert into #temp select 2,'AU','2014-09-02','2014-10-17'
select * from #temp
drop table #temp
View 6 Replies
View Related
Feb 25, 2015
I am having some difficulty getting a query to output an alpha numeric range grouping.
I have this data set:
Despatch_id Sample_ID
MIR00831 MCR0005752
MIR00831 MCR0005753
MIR00831 MCR0005754
MIR00831 MCR0005755
MIR00831 MCR0005756
MIR00831 MCR0005757
[code]....
Output:
DESPATCH_ID SAMPLE_ID_FROM SAMPLE_ID_TO
MIR00831 MCR0005752 MCR0005762
MIR00831 MCR0005803 MCR0005806
MIR00831 MCR0005808 MCR0005813
They need to be grouped by range specific to the alpha numeric part, which can vary within the same despatch. I was thinking of using a row over partition after splitting the numeric and alpha part and to check if they are consecutive and build the range. But I am thinking that this approach is an overkill and there may be a better way to achieve this in SQL 2012.
I have included the create table scripts and example data below:
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[SAMPLE_TABLE](
[DESPATCH_ID] [nvarchar](30) NOT NULL,
[SAMPLE_ID] [nvarchar](30) NOT NULL
[code]....
View 7 Replies
View Related
Jun 3, 2014
I have column which stores People count based on department, Now I want to keep them in the batch of 1000, If the running summary of (No of people) from departments reached 1000 then it should start sum(no of people) from 0 to 1000
Is there any running summary kind of function which can start sum record with in range of 0-1000
For Ex. My Data stored like this
Dept People Count
CSE 200
IT 250
EEE 312
ECE 214
MEC 337
Batch Grouping
Dept People Count BatchSum
CSE 200 200
IT 250 450
EEE 312 762
ECE 214 976
MEC 337 337 (Note here since its crossing 1000, its resetting and starting summary)
I implemented this with While Loop & if condition, But its very slow, is there any other way to achieve it in better way.
View 8 Replies
View Related
Jun 25, 2014
Given a Table1 with two columns 'Name' with some N rows of data and another Table2 with one column 'SeqNo' with N rows, each of which contains a unique integer which can be ordered monotonically, I want to do an INSERT into some Table3 with two columns 'Name' and 'SeqNo' such that each INSERT'd row gets one of the unique integers.
E.g. -
Table1 contains 'Fred','Tom','Mary','Larry'
Table2 contains 6000978,6000979,6000980,6000981
INSERT INTO Table3
SELECT Table1.Name
Table2.SeqNo
FROM Table1
And I want to get Table3
'Fred',6000978
'Tom'.6000979
'Mary',6000980
'Larry',6000981
How can I reference Table2 so that Table2.SeqNo will 'line up' properly? Note that the ordering of the SeqNo values isn't mandatory as long as each SeqNo is assigned to one and only one row.
On edit: Table2 isn't required, it's just the way I started thinking about it. It would be nicer to just have two integer vars, @StartSeqNo = 6000978 and @EndSeqNo = 6000981 for he example above. Either way is fine.
View 3 Replies
View Related
Mar 16, 2015
I have a table with EmployeeID, StartDate, and EndDate with a PK of EmployeeID, StartDate. How can I check to see that there's no overlap for StartDate and EndDate for a given employee? That is, on any given day there must only be 1 row for an employee where Getdate() is Between StartDate and EndDate. For an active employee their EndDate is set to 06/06/2079.
I've tried it using Row_Number() with Over() but am returning too many rows indicating overlap when none exists.
View 7 Replies
View Related
Aug 16, 2006
I am attempting to write a SQL query that retrieves info processed between two times (ie. 2:00 pm to 6:00 pm) during a date range (ie. 8/1/06 to 8/14/06)... I am new to SQL and am perplexed... I have referenced several texts, but have not found a solution. Even being pointed in the right direction would be greatly appreciated!!
View 6 Replies
View Related
Apr 28, 2015
I need to provide a minimum value over a 12 hour time range of data. I'm struggling with performance issues due to the amount of data. Currently I log about 100 devices reporting once per minute into a table. Also about once per minute I need to pull the minimum value reported for each device in the last 12 hours. Currently I'm maintaining a separate table with entries for just the last 12 hours and just performing a Select Min(Temp) Where DeviceID=x, but it already holds about 700,000 records at any given time. The number of devices will increase substantially and this will no longer be viable.
Sample Table
ID DeviceID Temp InsertDate
1 10 55 04-28-2015 8:00 AM
2 65 74 04-28-2015 8:00 AM
3 44 23 04-28-2015 8:00 AM
4 10 87 04-28-2015 8:01 AM
5 65 65 04-28-2015 8:01 AM
View 3 Replies
View Related
May 14, 2015
I am using Sql Server 2012.
This is how I calculate the ratio of failures in an order:
31 Days Table 1 query
sum(CASE
WHEN (datediff(dd,serDATE,'2015-01-21')) >= 31 THEN 31
WHEN (datediff(dd,serDATE,'2015-01-21')) < 0 THEN 0
ELSE (datediff(dd,serDATE,'2015-01-21'))END) as 31days1 .
How do i loop and pass dates dynamically in the Datediff?
31 Failures Table 2 query
SUM(Case when sometable.FAILUREDATE BETWEEN dateadd(DAY,-31,CONVERT(DATETIME, '2015-01-21 23:59:00.0', 102))
AND CONVERT(DATETIME, '2015-01-21 23:59:00.0', 102)Then 1 Else 0 END) As Failures31,31 Day Cal(Formula) combining both Table 1 and Table 2
((365*(Convert(decimal (8,1),T2.Failures31)/T1.31day))) [31dayCal]This works fine when done for a specific order.
I want a similar kind of calculation done for day wise and month wise.
2. what approach should I be using to achieve day wise and month wise calculation?
I do also have a table called Calender with the list of dates that i can use.
View 3 Replies
View Related
Aug 5, 2014
I am doing search through Date Range but didn't get correct result.
For Example if i created a Task on 5/8/2014 and when i have take Date Range from 1/8/2014 to 6/8/2014 then didn't get 5/8/2014 data in result but when i taken range from 1/8/2014 to 5/8/2014 then got the 5th Date data.
I am taking Range Inclusive Operator(:).
SELECT ( STRTOMEMBER(@FromDate) : STRTOMEMBER(@ToDate) )
View 1 Replies
View Related
Apr 27, 1999
I have a query which returns information about transactions similar to this:
Select account, trans_code, quantity
from ledger_table
This returns something like:
acct trans_code quantity
----- ---------- ------------
2 2 1000
2 3 500
2 3 300
3 2 100
3 2 500
etc.
What I need to do is add a lot number for each acct/trans code type. This is merely a sequential number for the transaction. This changes the output as follows:
acct trans_code quantity lot
----- ---------- ------------ ---
2 2 1000 1
2 3 500 1
2 3 300 2
3 2 100 1
3 2 500 2
3 3 1000 3
3 5 200 1
etc.
The lot number is reset for each grouping.
Does anyone have a way to do this outside of a cursor or temp table?
TIA, any help greatly appreciated.
View 1 Replies
View Related
Jul 23, 2005
Let's say I have the following table:entry product quality1 A 802 A 703 A 804 B 605 B 906 C 807 D 808 A 509 C 70I'm looking for a way to find the average "quality" value for aSEQUENTIAL GROUPING of the same Product. For exmple, I need anaverage of Entry 1+2+3 (because this is the first grouping of the sameproduct type), but NOT want that average to include row 8 (which isalso Product A, but in a different "group".)I'm sure it can be done (because I can describe it!), but I'll be amonkey's uncle if I can figure out how. I would imagine it wouldinvolve some sort of running tally that references the next record asit goes... to see if the product type has changed. Perhaps use of atemporary table?Muchas gracias!!Cy.
View 9 Replies
View Related
Apr 27, 2015
using below query to compare columns in two tables.
SELECT
Col1 = ISNULL(a.name,b.name),
Col2 =
CASE
WHEN ISNULL(a.name,'') = '' THEN 'Table B'
WHEN ISNULL(b.name,'') = '' THEN 'Table A'
[code]...
How to export the result to EXCEL from SQL Server 2008 R2.
View 7 Replies
View Related
Feb 17, 2005
Hello everyone,
I have a stored procedure that supplies rows for a front-end DataGrid that allows custom paging. The stored procedure must return the requested "page" of rows as identified by a sproc argument. Currently, I'm loading the the query's result set into a temporary table that has an identity column as primary key. I then run a second query against the temp table that uses the identity column value to strip out the requested "page" of rows and return them to the front-end DataGrid.
I'd like to eliminate the temporary table. To do so I would need to create the equivalent of an identity column in the query's sorted results and reference this value in the WHERE clause in order to return only the requested rows.
Does anyone know of a way to generate a sequential number (starting at 1) within a query (and after the rows have been sorted by the ORDER BY)? I don't think this can be done but I put it out for those who may know better.
Thanks for your help. If you know this is impossible, that would be helpful feedback as well.
BlackCatBone
View 3 Replies
View Related
Jul 20, 2005
I have a database that is pre-populated with sequential part numbers.As people reserve the parts I update a flag to show the # is no longeravailable. Now they want the ability to take out a block of "x"number of sequential part numbers - say for example 5.If my database had the following numbers available:101104105110111112113114It should return 110 thru 114 and then I would write an update queryto change the flags to 1 (checked out).I have only been able to return the first "x" number of records - havenot been able to make sure they are stepped sequentially - with thefollowing:SELECT ID_ITEM From PARTNO_CHKOUT_SPECIAL M Where (Select Count(*)FROM PARTNO_CHKOUT_SPECIAL NWHERE N.ID_ITEM <= M.ID_ITEM) >= 0 AND TYPE_REC=1 ANDFLAG_CHECKED_OUT=0 {maxrows 5}The above would return 101, 104, 105, 110, 111I tried using an (N.ID_ITEM+1)-M.ID_ITEM=0 to try stepping and geterrors, probably incorrect syntax. Can I do this in an SQL statement?
View 6 Replies
View Related
Feb 21, 2014
I am trying to update records based on the results of a query with a subquery.
The result set being produced shows the record of an item number. This result produces the correct ItemNo which I need to update. The field I am looking to update is an integer named Block.
When I run the update statement all records are updated and not the result set when I run the query by itself.
Below you will find the code I am running:
create table #Items
(
ItemNovarchar (50),
SearchNo varchar (50),
Historical int,
Blocked int
[Code] ....
Below is the code I am using in an attempt to update the block column but it updates all records and not the ones which I need to have the Blocked field set to 1.
Update #items set Blocked = 1
Where Exists
(
SELECT ItemNo=MAX(CASE rn WHEN 1 THEN ItemNo END)
--,SearchNo
--,COUNT(*)
[Code] ...
Why is the update changing each record? How can I change the update to choose the correct records?
View 6 Replies
View Related
May 30, 2014
I have the following table
CREATE Table #Table1
(
ID INT, Name VARCHAR(50), Class VARCHAR(10)
)
INSERT INTO #Table1
Select 1, 'name1', 'a' UNION ALL
Select 2, 'name1', 'a' UNION ALL
[Code] ....
Is it possible to have each name and its corresponding class in a single line separated by commas to give a result like the one below in #table2 ?
CREATE Table #Table2
(
ID INT, CommaSeparated VARCHAR(100)
)
INSERT INTO #Table2
Select 1, 'name1, a' UNION ALL
[Code] ...
What I have
Select * FROM #Table1
Final Result
Select * FROM #Table2
Note that I still want to see all the IDs regardless.
If that is not possible to see all the IDs, I think the results below in #Table3 should suffice.
CREATE Table #Table3
(
CommaSeparated VARCHAR(100)
)
INSERT INTO #Table3
Select 'name1, a' UNION ALL
Select 'name2, b, c, d' UNION ALL
Select 'name3, e, f'
Select * FROM #Table3
View 3 Replies
View Related
Aug 7, 2014
I am having problems building a CTE. I have a table:
declare @tbl table ( ID int, S time(0), E time(0) )
with the following data:
insert@tbl ( ID, S, E )
values ( 1, '03:00', '05:00' ),
( 1, '04:00', '06:30' ),
( 1, '22:00', '23:00' ),
( 1, '23:00', '23:40' ),
( 1, '23:30', '23:45' )
I need to build a CTE that will eliminate overlaps and produce the following result:
ID S E
-- --------- ---------
1 03:00:00 06:30:00
1 22:00:00 23:45:00
View 1 Replies
View Related
May 7, 2015
I would like to replace the value in the Select query of CO OWNER with a space ' ' or NULL if the ORDINAL value = 0.
The CO OWNER name is stored in the CARDNAME table, and the OWNER name is stored in the NAME table. I can not change the db structure.
JEAN is the ACCOUNT owner and BILL is CO OWNER of two cards.
Current Select Results:
ACCOUNT CARD ORDINAL CO OWNER OWNER
200500 9999999999999100 2 BILL JEAN
200500 9999999999999101 1 BILL JEAN
200500 9999999999999102 0 BILL JEAN
Desired Select Results:
ACCOUNT CARD ORDINAL CO OWNER OWNER
200500 9999999999999100 2 BILL JEAN
200500 9999999999999101 1 BILL JEAN
200500 9999999999999102 0 NULL JEAN
Current SQL Select statement:
SELECT DISTINCT
CARD.PARENTACCOUNT AS ACCOUNT,
CARD.NUMBER AS CARD,
CARD.ORDINAL,
CARD.STATUS,
CARDNAME.FIRST AS CO_OWNER,
[code]....
View 9 Replies
View Related
May 20, 2015
I have 2 tables (#raw1 & #raw2). Each has a year (yr) and month (mnth) and a count (cnt1 / cnt2) field. I need a table created as follows:
2013 2014 2015
cnt1 cnt2 cnt1 cnt2 cnt1 cnt2
jan 5 77 77 8 88
etc....
Normally, I would ask about a pivot but since it is months down one side and year and columns on the top, I don't know if a pivot will work.
create table #raw1 ([yr] int, [mnth] int, [cnt1] int)
insert into #raw1 values
(2013, 1, 5)
, (2013, 2, 5)
, (2013, 3, 5)
, (2013, 4, 5)
, (2013, 5, 5)
, (2013, 6, 5)
[code]....
View 1 Replies
View Related
Sep 15, 2015
Lets say I have a set of columns as follows:
Table.Name - Table.ID - Table.Code
I want to write a query that will cycle through the results and if it comes across another record that has a matching Table.ID I want to exclude that row from the result set.
I am not all too familiar with how to use either a Case or If..Else Statement within a Sql statement that would accomplish this.
View 7 Replies
View Related
Oct 7, 2015
I am trying to produce a query result that will be using a Case statement to determine values based on scores in a table for each row. The result needs to be exported to be used to upload to a state reporting website. My problem is that the state requires in the CSV file that is uploaded a lot of fields that we do not actually have in the database table we are creating the result set from. After I receive my result set using the Case statement, is there a way to add additional columns that don't actually exist in a table so I can export directly from SQL?
View 6 Replies
View Related
May 2, 2006
Hi,
Can anyone tell me offhand the simplest/most elegant way of updating an integer column to a sequential column of numbers with a query?
e.g given
intval | Description| Cost
0 | Descvalue0| 4.32
2 | Descvalue2| 4.33
3 | Descvalue3| 4.34
8 | Descvalue8| 4.35
change it to:
intval | Description| Cost
0 | Descvalue0| 4.32
1 | Descvalue2| 4.33
2 | Descvalue3| 4.34
3 | Descvalue8| 4.35
I think it might need a stored proc..
Many Thanks
greg
View 2 Replies
View Related
Apr 5, 2014
I have a problem. In my database I have the following numbers available:
101
104
105
110
111
112
113
114
What I need is to get a select query with records and sequentials numbers after it like:
101 0
104 1 (the number 105)
105 0
110 4 (the numbers 111,112,113,114)
111 3 (the numbers 112,113,114)
112 2 (the numbers 113,114)
113 1 (the numbers 114)
114 0
How can I do It?
View 2 Replies
View Related
