SQL Server 2012 :: SELECT Multiple Criteria If Not Null
Sep 2, 2014
I have a dataset where i want to select the records that matches my input values. But i only want to try macthing a field in my dataset aginst the input value, if the dataset value is not NULL.
I always submit all 4 input values.
@Tyreid, @CarId,@RegionId,@CarAgeGroup
So for the first record in the dataset i get a succesfull output if my input values matches RegionId and CarAgeGroup.
I cant figure out how to create the SQl script for this SELECT?
My dataset
TyreIdCarIdRegionIdCarAgeGroup
NULLNULL1084 2
65351084 1
5351084 1
NULL411085 NULL
120NULLNULL NULL
NULLNULL1084 2
65NULL1084 NULL
View 9 Replies
ADVERTISEMENT
Jun 15, 2015
I need to calculate the last two columns (noofgrp and grpsize) No of Groups (count of Clientid) and Group Size (number of clients in each group) according to begtim and endtime. So I tried the following in the first Temp table
GrpSize= count(clientid) over (partition by begtime,endtime) else 0 end
and in the second Temp Table, I have
select
,GrpSize=sum(grpsize)
,NoofGrp=count(distinct grpsize)
From Temp1
The issue is for the date of 5/26, the begtime and endtime are not consistent. in Grp1 (group 1) all clients starts the session at 1030 and ends at 1200 (90 minutes session) except one who starts at 11 and end at 1200 (row 8). For this client since his/her endtime is the same as others, I want that client to be in the first group(Grp1). Reverse is true for the second group (Grp2). All clients begtime is 12:30 and endtime is 1400 but clientid=2 (row 9) who begtime =1230 but endtime = 1300. However, since this client begtime is the same as the rest, I wan that client to be in the second group (grp2) My partition over creates 4 groups rather than two.
View 9 Replies
View Related
Sep 13, 2006
Hi
I would like to get records from a table and present a result set based upon the search fields
the search fields could be any of the following: PNo, Year, JNo, C1No6, C2No3, C3No3, C4No3,
they could enter any combination of these however if they dont enter any of the above then the search should not retrieve any thing. the table colunms are listed below and asample data set is also shown below.
Currently the only way i think it can be done is by writing multiple queries with different queries to be executed based upon the search field that have been filled? can it be done in a stored prcedure? and can it be done using non-dynamic sql?
Name, PNo, Year, JNo, C1No6, C2No3, C3No3, C4No3, RefImage
adam, 01, 1999, 099, 3yh333, 888, 989, 999, ref1999099.jpg
Brian, 01, 2005, 029, 3yh323, 828, 929, 929, ref1929099.jpg
sid, 04, 1989, 039, 3yh343, 838, 939, 939, ref1993399.jpg
jack, 06, 1996, 069, 3yh633, 868, 969, 969, ref1669099.jpg
View 12 Replies
View Related
Sep 24, 2007
Let me start with saying thanks to all of you who have helped me (I'm a SQL newbee after doing OO for the past 12+ years)
I need to do several aggregates on multiple columns, with each column having different SELECT Criteria.
Sample Data:
Dept Project Cost CostFlag Schedule ScheduleFlag
D1 D1P1 495 1 135 3
D1 D1P2 960 2 70 2
D1 D1P3 1375 3 105 2
D1 D1P4 1050 2 160 3
D1 D1P5 1890 3 40 1
D2 D2P1 650 1 155 3
D2 D2P2 890 2 125 2
D2 D2P3 1235 3 85 1
D2 D2P4 430 1 140 3
D3 D3P1 1960 3 45 1
D3 D3P2 1490 3 85 1
D3 D3P3 1025 2 135 3
D3 D3P4 615 1 100 2
D3 D3P5 270 1 70 1
D3 D3P6 815 2 155 3
I need to calculate MEAN (average), Standard Deviation, Variance, Range, Span & Median for each data column (Cost, Schedule in the test data), where each data column has different selection criteria. I have the calculations working for each column individually (e.g. funcCalcCost, funcCalcSchedule), but I need to return the calculated values as a single data set:
SELECT Dept, Project, AVG(Cost) as Cost_Mean, MAX(Cost) - MIN(Cost) as Cost_Range, .......
WHERE CostFlag = @InputParameter
GROUP BY Dept, Project
The code above works great - but only for a single column. I need to return a dataset like this:
Dept Project Cost_Mean Cost_Range
D1 D1P1 495 135
D1 D1P2 960 70
D1 D1P3 1375 105
I need to return a dataset like this:
Dept Project Cost_Mean Cost_Range Schedule_Mean Schedule_Range
D1 D1P1 495 135 100 28
D1 D1P2 960 70 42 12
D1 D1P3 1375 105 91 38
I also have working code calculate the MEDIAN (what a pain that was, thank god I found a code example to get me going on the MEDIAN)
Thanks!
View 7 Replies
View Related
Jun 2, 2015
I am working on a project that was assigned to me that has to do with data in one of our SQL databases. I have the following query that takes information from a single table and averages test scores for each student.
--Group all scores from same student and average them together
with cte_names as
(
SELECT StudentID, MAX(StudentName) AS StudentName
FROM LDCScores
WHERE schoolYear='2014-2015' AND term = 3
GROUP BY StudentID
[code].....
I now need to take the results from the above query and determine the percentage of students, per school that scored a 2 or greater in grade 7 for each test. For grade 8 scored a 2.5 or greater, grade 9 scored a 3 or greater, grade 10 scored a 3 or greater, grade 11 scored a 3.5 or greater, and grade 12 scored a 3.5 or greater.
View 7 Replies
View Related
Apr 17, 2008
Hi! I'm new to SQL and have a question...
I'm writing a script that gathers a few variables from an outside source, then queries a table and looks for a record that has the exact values of those variables. If the record is not found, a new record is added. If the record is found, nothing happens.
Basically my SELECT statement looks something like this, then is followed by an If... Else statement
SELECT * FROM TableName
WHERE LastName = varLastName
AND FirstName = varFirstName
AND Address = varAddress
If RecordSet.EOF = True Then
'Item Not Found, add new record
'code to add new record......
Else
'Item Found, do nothing
End If
RecordSet.Update
RecordSet.Close
Even when I try to delete the If.. statement and simply display the records, it comes up as blank. Is the syntax correct for my SELECT statement??
View 5 Replies
View Related
May 18, 2006
Hello:
I need assistance writing a SELECT statement. I need data from a table that matches one (or more) of multiple criteria, and I need to know which of those criteria it matched. For instance, looking at the Orders table in the Northwind database, I might want all the rows with an OrderDate after Jan 1, 1997 and all the rows with a ShippedDate after June 1, 1997. Depending on which of those criteria the row matches, it should include a field stating whether it is in the result set because of its OrderDate, or its ShippedDate. One way of doing this that I've already tried is:
SELECT 'OrderDate' AS [ChosenReason], Orders.*FROM OrdersWHERE OrderDate > '1-1-1997'UNIONSELECT 'ShippedDate' AS [ChosenReason], Orders.*FROM OrdersWHERE ShippedDate > '6-1-1997'
In my application, scanning a table with thousands of records for five sets of criteria takes a few seconds to run, which is not acceptable to my boss. Is there a better way of doing this than with the UNION operator?
Thank you
View 2 Replies
View Related
Feb 4, 2014
I wrote a select statement, I only want to see orders with max lastUpdatedOn date of 14 days and older. Now my results show dates with all orders of 14 days and older (which is OK), but all others are displayed in the "Uitgifte" column as "NULL". But those orders should not be displayed at all.
selectdistinct ProductionHeader.ProdHeaderOrdNr,
ProductionHeader.PartCode,
ProductionHeader.Description,
ProductionHeader.Qty,
(select max (ProdStatusLog.ProdStatusCode)
[code]...
View 8 Replies
View Related
May 10, 2014
In a Library Management database we have these tables
1) Document ( DocNo , Doc_type , permalink,inDate)
2)Title(id, DocNo,Main_Title, Other_Title)
3)Author(id , Author_Name , Author_Family,Type--Like:main author , translator ,....)
4)Publisher(id,DocNo , Name,Publisedate,address)
5)Subject(id,DocNo,Subject)
6)Description(id,DocNo,ISBN,description)--one document may have some ISBN,etc
In document table I have 500,000 records.
I want to search a word in these tables ,for example i want to search 'Computer' ,this word may be in subject or title or description and etc. How can I do this with best performance?
View 3 Replies
View Related
Aug 18, 2015
how we can replace the multiple values in a single select statement? I have to build the output based on values stored in a table. Please see below the sample input and expected output.
DECLARE @V1 NVARCHAR(100)
SELECT @V1 = 'FirstName: @FN, LastName: @LN, Add1: @A1, Add2: @A2 '
DECLARE @T1 TABLE
(FN VARCHAR(100), LN VARCHAR(100), A1 VARCHAR(100), A2 VARCHAR(100))
[code]....
View 7 Replies
View Related
Feb 12, 2014
I have created a trigger that is set off every time a new item has been added to TableA.The trigger then inserts 4 rows into TableB that contains two columns (item, task type).
Each row will have the same item, but with a different task type.ie.
TableA.item, 'Planning'
TableA.item, 'Design'
TableA.item, 'Program'
TableA.item, 'Production'
How can I do this with tSQL using a single select statement?
View 6 Replies
View Related
Aug 8, 2015
I am stuck with a query that I am working on. I have data like below.
DECLARE @Input TABLE
(
OrderID INT,
AccountID INT,
StatusID INT,
Value INT
)
INSERT INTO @Input VALUES (1,1,1,15), (2,1,1,20), (3,2,1,5), (4,2,2,40), (5,3,1,20), (6,1,2,40), (7,1,2,40)
If an Account's value reaches 20 for StatusID = 1 and 40 for StatusID = 2, that is a called "Good". I want to find out which order made the Account become "Good".
By looking at the data, it is understandble that AccountID 1 crossed Status ID 1's limit of 20 with order 2, but the status ID 2's limit was only crossed after the 6th order was placed. So my output should show 6 for AccountID 1.
For AccountID 2, value of statusID 1 was 5 with orderid 3, but it reached the limit for status id 2 of 40 with order 4. But the first condition was not met. so it shouldn't be seen in the output.
Same with AccountID 3 as well, It reached the limit of status id 1 with order 5 but the limit for order 2 wasn't reached so it should be ignored as well.
I wrote the code as below, its working fine but I still know there are better ways to write since I will be working with atleast a million records.
;WITH CTE AS
(
SELECT OrderID,AccountID, StatusID, SUM(Value) OVER(Partition By AccountID, StatusID ORDER BY OrderID) AS RunningTotal
FROM @Input
[Code] ....
View 2 Replies
View Related
Feb 12, 2014
I have a data output with many rows. In order to group things with flags, I do this in excel using 2 formulas which *** a flag of 0 or 1 in 2 new columns.
This takes a long long time as I have hundreds of thousands of rows and wondered of I could do it in sql?
Its transact SQL and the formulas I use in excel are:
=IF(SUMPRODUCT(($A$2:$A2=A2)*($B$2:$B2=B2)*($C$2:$C2>=C2-1/24)*($C$2:$C2< C2+1/24))> 1,0,1)
=IF(SUMPRODUCT(($A$2:$A2=A2)*($B$2:$B2=B2))>1,0,1)
How I can do this in sql??
The columns above do not relate to the actual columns I use, just an example.
View 9 Replies
View Related
Sep 18, 2015
I am trying to import data from 4 columns in a spreadsheet, the Columns are (Last Name - First Name - ID - Code) and this spreadsheet has around 10k records. I want to add what is in this spreadsheet to the query I have below that uses the EXCEPT operator but I am not sure the best way to go about it.
Using the example I have filtered below for the name "Denise Test", at the end of the day I want everything that is in the spreadsheet to also be excluded from the results.
So before the spreadsheet lets say the 2nd query referencing table C has the following results for Denise Test
Last_Name First_Name ID Code
Test Denise 1 5
Test Denise 2 4
After adding the spreadsheet I want it to show this:
Last_Name First_Name ID Code
Test Denise 1 5
Test Denise 2 4
Test Denise 3 3
Here is the query as it stands now without the inclusion of the spreadsheet:
SELECT
ta.last_name,
ta.first_name,
tb.ID,
tb.code
FROM
TableA ta
INNER JOIN TableB tb
[code]....
View 0 Replies
View Related
Jul 28, 2015
So I have a problem with combining cells: some of the cells are blank and some of the cells have NULL value.
The combined blank cells return perfect.
But the combined cells in which 1 or more contains NULL will return as NULL
0-4139-00-01OPTIONAL EQUIPMENT 139 - A -
0-4139-00-02NVG EQUIPMENT 139 - A -
0-4139-00-03NVG EQUIPMENT 139 - A -
0139-01-01BRAKE RESERVOIR NULL
A part of the script which i use is:
STUFF((SELECT ', ' + i.ac_type + ' - '
+ i.range_or_single+ ' ' + ' - ' + i.serialno_to
FROM msc_item_effectivity i
inner JOINmsc_item h
ONb.taskcard_verno_i = h.taskcard_verno_i
WHERE h.itemno_i = i.itemno_i
FOR XML PATH('')), 1, 1, '')
i.ac_type = 139
i.range_or_single = A
i.serialno_to = blank or NULL
I want the result of the blank value to be the same as the NULL value.
0139-01-01BRAKE RESERVOIR 139 - A -
View 2 Replies
View Related
Aug 22, 2007
Hi,
I have multiple columns in a Single Table and i want to search values in different columns. My table structure is
col1 (identity PK)
col2 (varchar(max))
col3 (varchar(max))
I have created a single FULLTEXT on col2 & col3.
suppose i want to search col2='engine' and col3='toyota' i write query as
SELECT
TBL.col2,TBL.col3
FROM
TBL
INNER JOIN
CONTAINSTABLE(TBL,col2,'engine') TBL1
ON
TBL.col1=TBL1.[key]
INNER JOIN
CONTAINSTABLE(TBL,col3,'toyota') TBL2
ON
TBL.col1=TBL2.[key]
Every thing works well if database is small. But now i have 20 million records in my database. Taking an exmaple there are 5million record with col2='engine' and only 1 record with col3='toyota', it take substantial time to find 1 record.
I was thinking this i can address this issue if i merge both columns in a Single column, but i cannot figure out what format i save it in single column that i can use query to extract correct information.
for e.g.;
i was thinking to concatinate both fields like
col4= ABengineBA + ABBToyotaBBA
and in search i use
SELECT
TBL.col4
FROM
TBL
INNER JOIN
CONTAINSTABLE(TBL,col4,' "ABengineBA" AND "ABBToyotaBBA"') TBL1
ON
TBL.col1=TBL1.[key]
Result = 1 row
But it don't work in following scenario
col4= ABengineBA + ABBCorola ToyotaBBA
SELECT
TBL.col4
FROM
TBL
INNER JOIN
CONTAINSTABLE(TBL,col4,' "ABengineBA" AND "ABB*ToyotaBBA"') TBL1
ON
TBL.col1=TBL1.[key]
Result=0 Row
Any idea how i can write second query to get result?
View 1 Replies
View Related
Oct 15, 2009
is there a way to update multiple rows in one update query in tsql? what I wanted to do is for example I got a table containing
code : desc
1 : a
2 : b
3 : c
4 : d
1 : e
3 : f
I wanted to update it to
code : desc
1 : x
2 : b
3 : y
4 : d
1 : x
3 : y
how to do it?
View 5 Replies
View Related
May 15, 2008
I have gridview and i want to ignor that filtering if that parameter is empty how do i write that query.
my query is
select * from UserMAster where UserId=@USerID and RoleId=@RoleId
if @UserId is blank then i want to select all records without filtering with user Id a
nd if i have passed null or anything as parameter in roleId then alsoi want all the records if it contain value then i want to do filetring is it possible to with query. or else send me some alternative so that i don't need to execute more query.
View 7 Replies
View Related
Jun 10, 2015
I created a query that got the following result. But I expect to get the structure like, care_nbr, cust_nbr,legal_name, address_type=physical address, addr_line_1, addr_line_2, address_type-primary address, ddr_line_1, addr_line_2. That means I only need primary and physical address, and expect them to show in a row to each care_nbr. How to perform that?
CARE_Nbr||Cust_Nbr||Legal_Name||||||| Address_Tpye |||Addr_Line_1 ||||||||||||||||Addr_Line_2
99000001||004554||Mac Marketing, LLC||Billing Address||210 Parktowne Blvd Ste. 1||NULL
99000001||004554||Mac Marketing, LLC||Mailing Address||210 Parktowne Blvd Ste. 1||NULL
99000001||004554||Mac Marketing, LLC||Primary Address||210 Parktowne Blvd Ste. 1||NULL
99000001||004554||Mac Marketing, LLC||Physical Address||210 Parktowne Blvd Suite 1||NULL
My script is here, and the sample result is attached. How should I modify this query to get my expected result?
select a.CARE_Number,
a.Customer_Nbr_Txt,
a.Customer_Type_Txt,
a.Legal_Name_Txt,
c.Address_Type_Txt,c.Address_Line_1_Txt,c.Address_Line_2_Txt,
a.Customer_Status_Txt,
a.Legal_Entity_Type_Txt,
a.Business_Unit_Txt
FROM dw_mart.dbo.DimCustomer a
[code]....
View 1 Replies
View Related
Mar 17, 2015
use of Row_Number() over ( partition... but I dont understand how.
Imagine I have a table like
CustomerID, PartNum, QtyinOrder, shipped
1 6 3 0
1 6 2 0
2 6 1 0
2 5 1 0
2 5 2 0
2 5 3 0
2 5 4 1
1 6 4 1
2 6 2 1
But I wanted to return
CustomerID, PartNum, MaxQtyOrderedNotShipped
That would be just the rows
1 6 3 0
2 6 1 0
2 5 3 0
If I use this:
Select CustomerId,PartNum, shipped, QtyInOrder AS MaxOrderedNotShipped
from
(SELECT [CustomerID]
,[PartNum]
,[QtyInOrder]
,shipped
, row_number() over (partition by [CustomerID], PartNum order by QtyInOrder desc) as recid from [SILK].[dbo].[MaxofGroup]) as f where recid =1
there is no restriction, so I get the shipped...If I alter the where clause to work only on not shipped, I get no records...as below
Select CustomerId,PartNum, shipped, QtyInOrder AS MaxOrderedNotShipped
from
(SELECT [CustomerID]
,[PartNum]
,[QtyInOrder]
,shipped
, row_number() over (partition by [CustomerID], PartNum order by QtyInOrder desc) as recid from [SILK].[dbo].[MaxofGroup]) as f where recid =1 and shipped=0
View 2 Replies
View Related
Nov 24, 2014
I ran the below 2 select statements and ended up seeing multiple cached instances of the same stored procedure. The majority have only one cached instance but more than a handful have multiple cached instances. When there are multiple cached instances of the same sproc, which one will sql server reuse when the sproc is called?
SELECT o.name, o.object_id,
ps.last_execution_time ,
ps.last_elapsed_time * 0.000001 as last_elapsed_timeINSeconds,
ps.min_elapsed_time * 0.000001 as min_elapsed_timeINSeconds,
ps.max_elapsed_time * 0.000001 as max_elapsed_timeINSeconds
[code]...
View 4 Replies
View Related
Sep 10, 2007
I am creating a .aspx page that links with Miscrosoft SQL Server 2005 Express. It includes a GridView control that displays all the table data on the page. You can then select a record from the control (currently by clicking an image button to the left of each record- is there any way of selecting the record by clicking anywhere on the row? How would that be done?) and it displays the data in a detailsview control below where the data can be changed etc.
The data is like a phonebook (Name, Telephone number, and some other misc fields) and the user should be able to search by either name or number to filter out the records shown in the gridview control. I have two textboxes for this, and I started with the name text box and it works fine. i.e. with one filterparameter and one filterexpression. So that if you just enter 'Da' it filters out the records displaying only those whose name starts with 'Da'.
I have experimented but have found no way of including filter expressions to use the number as a search. I added the second filter parameter (under sqldatasource control so that:
<FilterParameters>
<asp:ControlParameter Name="DestinationName" ControlID="txtName" /><asp:ControlParameter Name="DestinationNumber" ControlID="txtNumber" />
</FilterParameters>
But I don't know what to do for the FilterExpressions. currently I just have:
FilterExpression="DestinationName LIKE '{0}%'"
i have tried using "DestinationName LIKE '{0}%' OR DestinationNumber LIKE '{0}%'" but it requires that both text boxes have data entered.
What I want is something that allows the user to enter either a name or number or both (all or part of so don't need to enter in full name/number) and it filters out the records accordingly. I.e. if you enterd 'Dav' and '079' it would bring back all the records who had a name starting with Dav and a number starting with 079. However if you enterd just 079 then it should just bring back all records with numbers starting 079 whatever their associated name.
Thanks
View 9 Replies
View Related
Aug 27, 2004
I have a table with a record that looks like the attached TXT.
I need to keep the most recently entered value where flag_out = 1 and delete those duplicate
records, and this should only apply to records where there's also an flag_in value of 1.
I've tried a bunch of delete statements without avail....
TIA
View 3 Replies
View Related
Oct 5, 2005
How can you handle multiple criteria query in T-SQL ? i wrote selection query and in my where clause i have about 7 different criteria and for some reason when i run the query i do not get any error but i do not get any data return.
So is there any other way to handle multiple criteria in T-SQL ?
View 12 Replies
View Related
Nov 2, 2007
Im sorry if this has been covered, I tried a search but I couldnt seem to find what I was after.
Anyway, I need an Update procedure which is actually several bunched into one. Ive had a stab at it myself, and perhaps my pseudo SQL might explain what I need..
Code Block
UPDATE [TW].[dbo].[TBLSalesPart]
SET
CASE WHEN [Part] = 'MONTV-' AND [YN] = 'False' THEN [SubCategory] = 20440 END
CASE WHEN [Part] = 'TC-' AND [YN] = 'False' THEN [SubCategory] = 20444 END
Hopefully this makes sense, cheers..
View 5 Replies
View Related
Aug 5, 2014
I concatenate multiple rows from one table in multiple columns like this:
--Create Table
CREATE TABLE [Person].[Person_1](
[BusinessEntityID] [int] NOT NULL,
[PersonType] [nchar](2) NOT NULL,
[FirstName] [varchar](100) NOT NULL,
CONSTRAINT [PK_Person_BusinessEntityID_1] PRIMARY KEY CLUSTERED
[Code] ....
This works very well, but I want to concatenate more rows with different [PersonType]-Values in different columns and I don't like the overhead, of using the same table in every subquery ([Person_1]). Is there a more elegant way to do this, without using a temp table or something else?
View 1 Replies
View Related
Jan 30, 2008
Hi.
I have this method in a class, it produces a string value based on the value of another property in the object (which represents a field in the database). I would like to turn this into a computed column in SQL server... but need help converting the formula if this is even possible. Thanks in advance.public string GetVendorEvalRating(int vendorevaltotal)
{
string vendorevalrating = "";if (vendorevaltotal >= 26)
{vendorevalrating = "Critical";
}else if ((vendorevaltotal >= 10) && (vendorevaltotal <= 25))
{vendorevalrating = "Material";
}else if ((vendorevaltotal >= 0) && (vendorevaltotal <= 9))
{vendorevalrating = "Minor";
}return vendorevalrating;
}
View 16 Replies
View Related
Mar 20, 2012
I am working on SQL Server in VB 2008. I have a table 'Records' having 8 columns. I have a search page where I can choose 5 different parameters to search as 'Category' , 'Name' , 'Date' etc.
I can successfully search with a single criteria selected either Category Name Or Date. But I want to create a single SQL command that can search my 'Records' table for either two or all the parameters depending on the selections made by the user.
View 5 Replies
View Related
Oct 14, 2013
I have two tables a and b, where I want to add columns from b to a with a criteria. The columns will be added by month criteria. There is a column in b table called stat_month which ranges from 1 (Jan) to 12 (Dec). I want to keep all the records in a, and join columns from b for each month. I do not want to loose any row from a if there is no data for that row in b.
Here is table a:
naics ust_code port all_qty_1_yr all_qty_2_yr all_val_yr all_air_val_yr all_air_wgt_yr all_ves_val_yr all_ves_wgt_yr all_cnt_val_yr all_cnt_wgt_yr all_border_val_yr
11111000 2010 2002 8070569.14298579 0 2335641254.30021 0 0 2335641254.30021 8156408492.66667 0 0 0
11111000 2230 2010 280841.478063446 0 84622385.9133129 0 0 84622385.9133129 299600780.773355 0 0 0
11111000 2410 1401 25735 0 12305667 0 0 12305667 25719794 0 0 0
[Code] ....
and here is table b:
naics ust_code port stat_month Cum_qty_1_mo Cum_qty_2_mo Cum_all_val_mo Cum_air_val_mo Cum_air_wgt_mo Cum_ves_val_mo
11111000 1220 0106 01 2 0 3440 0 0 0
11111000 1220 0107 03 14 0 3442 0 0 0
11111000 1220 0108 09 0 0 0 0 0 0
[Code] ....
I do not know how to have the multiple joins for 12 different months and what join I have to use. I used left join but still I am loosing not all but few rows in a, I would also like to know how in one script I can columns separately from stat_mont =’01’ to stat_month =’12’
/****** Script for SelectTopNRows command from SSMS ******/
SELECT a.[naics]
,a.[ust_code]
,a.[port]
,a.[all_qty_1_yr]
,a.[all_qty_2_yr]
[Code] ....
Output should have all columns from a and join columns from b when the months = '01' (for Jan) , '02' (for FEB), ...'12' (for Dec): Output table should be something like
* columns from a AND JAN_Cum_qty_1_mo JAN_Cum_qty_2_mo JAN_Cum_all_val_mo JAN_Cum_air_val_mo JAN_Cum_air_wgt_mo JAN_Cum_ves_val_mo FEB_Cum_qty_1_mo FEB_Cum_qty_2_mo FEB_Cum_all_val_mo FEB_Cum_air_val_mo FEB_Cum_air_wgt_mo FEB_Cum_ves_val_mo .....DEC_Cum_qty_1_mo DEC_Cum_qty_2_mo DEC_Cum_all_val_mo DEC_Cum_air_val_mo DEC_Cum_air_wgt_mo DEC_Cum_ves_val_mo (FROM TABLE b)
View 1 Replies
View Related
Oct 14, 2013
I have two tables a and b, where I want to add columns from b to a with a criteria. The columns will be added by month criteria. There is a column in b table called stat_month which ranges from 1 (Jan) to 12 (Dec). I want to keep all the records in a, and join columns from b for each month. I do not want to loose any row from a if there is no data for that row in b.
Here is table a:
CREATE TABLE #A(
naics INT,
ust_code INT,
port INT,
all_qty_1_yr FLOAT,
[Code] ....
And here is table b:
CREATE TABLE #B(
naics INT,
ust_code INT,
port INT,
stat_month INT,
Cum_qty_1_mo FLOAT,
[Code] ....
I do not know how to have the multiple joins for 12 different months and what join I have to use. I used left join but still I am loosing not all but few rows in a, I would also like to know how in one script I can columns separately from stat_mont =’01’ to stat_month =’12’
/****** Script for SelectTopNRows command from SSMS ******/
SELECT a.[naics]
,a.[ust_code]
,a.[port]
,a.[all_qty_1_yr]
,a.[all_qty_2_yr]
[Code] ....
output should have all columns from a and join columns from b when the months = '01' (for Jan) , '02' (for FEB), ...'12' (for Dec): Output table should be something like
* columns from a AND JAN_Cum_qty_1_mo JAN_Cum_qty_2_mo JAN_Cum_all_val_mo JAN_Cum_air_val_mo JAN_Cum_air_wgt_mo JAN_Cum_ves_val_mo FEB_Cum_qty_1_mo FEB_Cum_qty_2_mo FEB_Cum_all_val_mo FEB_Cum_air_val_mo FEB_Cum_air_wgt_mo FEB_Cum_ves_val_mo .....DEC_Cum_qty_1_mo DEC_Cum_qty_2_mo DEC_Cum_all_val_mo DEC_Cum_air_val_mo DEC_Cum_air_wgt_mo DEC_Cum_ves_val_mo (FROM TABLE b)
View 1 Replies
View Related
Jun 9, 2014
I have a straight-forward select query to show work orders for a particular customer as below. I want to add a field value from another table, deltickitem diwhich contains contract records. I need to include the field di.weekchg to show the weekly hire rate, but the joined query must ensure that the both the contract number matches that in the original select and that the item number matches that in the actual select. Additionally, there is the problem that the item can appear more than once in the deltickitem table against a particular contract (if item has been off-hired and then re-hired on the same contract number) - in this case the query must select the record with the highest di.counter number, which I haven't worked out how to put in my query.
This is my basic code, but I keep ending up with duplicate work order lines in my result set.
Select wh.worknumber, wh.custnum, wh.contract, wh.sitename, wh.itemcode, wh.regnum, m.name, di.weekchg,
wh.date_created, wh.task_descr, wh.actual_labour_sale+wh.actual_parts_sale as [Repair Cost]
From worksorderhdr wh Left Join
inventory iv On iv.item = wh.itemcode inner Join
models m On m.id = iv.model_id left join deltickitem di on di.dticket = wh.contract
where wh.custnum = 'BARRATNE' and wh.rejected <> 1 and wh.charge_to_cust = 1
order by wh.date_created
View 9 Replies
View Related
Jul 14, 2014
Consider the following dataset:
ID|MD|TYPE
1|JOHN|A
2|JOHN|B
3|JOHN|B
4|BOB|A
5|BOB|A
6|BOB|B
7|BOB|B
8|BOB|B
I need to count the number of IDs for each MD and each TYPE like this:
MD|A|B
JOHN|1|2
BOB|2|3
I only know how to count everything by MD like this:
SELECT MD, COUNT(ID) AS TOTAL
FROM MY_TABLE
GROUP BY MD
ORDER BY MD
The query above results in:
MD|TOTAL
JOHN|3
BOB|5
View 5 Replies
View Related
Oct 21, 2014
My selection criteria is as follows:
where content like '%EditLiveJava%'
or content like '% Sys__%' ESCAPE '_'
or content like '%<div class="row"/>%'
or content like '%<a href="" title=""%'
or content like '%cmsprod%'
or content like '%Error processing inline link%'
or content like '%see log for stack trace%'
I output the content field if the search is true but would like to also output which specific 'like' has been found.
Can I do this in the one pass or do I have to read the database separately for each condition?
View 3 Replies
View Related
