SQL Server 2012 :: SELECT Qualified Employees Based On Program Requirements
Jul 31, 2015
Basically I'm trying to produce a report that shows qualified employees for each program. Each employee can possess many qualifications. There will be no programID parameter submitted by the user. I just want to produce the report which shows the programs and the qualified employees for each. I thought I had a query that was working but once I added a different ProgramID into the ProgramModules table things went south.
Here are my tables:
tblEmployees (table of employees)
- EmployeeID
- EmployeeName
tblQualifications (table of qualifications)
- Qualification_ID
- QualificationTitle
tblEmployeeQualification (table of all employees qualifications)
-EmpQualificationID
-EmployeeID (fk for tblEmployees)
-QualificationID (fk for tblQualifications)
tblPrograms (table of programs)
-ProgramID
-ProgramTitle
tblProgramModules (table of qualifications required by each program)
-ProgramModuleID
-ProgramID (fk for tblPrograms)
-QualificationID (fk for tblQualifications)
Here is the query I was working with that works when there are only records in the ProgramModules table that use the same ProgramID
SELECT
tblProgramModules.TrainingProgramID,
tblEmployees.EmployeeID,
tblEmployees.EmployeeName
FROM
tblEmployees
[Code] .....
View 6 Replies
ADVERTISEMENT
Mar 21, 2014
What I need to do it select the top 80 percent of records per group based on the group total. To be clear I am not trying to just grab the top x percent of rows.
Table 1:
DealerID RepairID
1 1
1 2
1 3
1 4
1 5
1 6
1 7
1 8
1 9
1 10
2 11
2 12
2 13
Table 2:
RepairID Tire
1 225/65R17 102T
2 225/65R17 102T
3 225/65R17 102T
4 235/60R18 102V
5 235/60R18 102V
6 235/60R18 102V
7 235/60R18 102V
8 205/55R16 89H
9 205/70R15 89H
13 225/65R17 102T
Table 1 has the total number of repair orders per dealer. This can be obtained by simply grouping on DealerID and counting the number of RepairIDs.
Table 2 has information on some of the repair orders and it is needed to select the top 80% of tire sizes. This table will be joined to Table 1 and grouped by DealerID and Tire.
Desired Output:
DealerIDTire RepairsOfThisTireRepairCount PercentOfTotalRepairOrders
1 235/60R18 102V4 10 40
1 225/65R17 102T3 10 30
1 205/55R16 89H1 10 10
2 225/65R17 102T1 3 33
The equation I am given to calculate the top tires per dealer is as follows: Total # of tires for the size / Total # of repair orders per dealer.
Here is what I have so far though I think I might have to rewrite all of it.
SELECT
DealerID ,
COUNT(RepairID)
INTO #TotalDealerRepairOrders
FROM
dbo.Table1
GROUP BY
DealerID
SELECT
[code].....
View 9 Replies
View Related
Aug 17, 2015
I am trying to select records based on a year.
DECLARE @Date
SET @Date = 2012
DECLARE @Year int
SET @Year = (SELECT DATEPART(yyyy,@Date))
SELECT @Year AS Year
--SELECT *
-- FROM [Orders].[dbo].[Orders] od
-- WHERE .Orderl_Date < @Date;
----WHERE DATEPART(yyyy,@Date)= @Year
----WHERE DATEPART(yyyy,od.Order_Date)= @ArchiveYear
View 5 Replies
View Related
Aug 17, 2015
DECLARE @Date
SET @Date = 2012
DECLARE @Year int
SET @Year = (SELECT DATEPART(yyyy,@Date))
SELECT @Year AS Year
--SELECT *
-- FROM [Orders].[dbo].[Orders] od
-- WHERE .Orderl_Date < @Date;
----WHERE DATEPART(yyyy,@Date)= @Year
----WHERE DATEPART(yyyy,od.Order_Date)= @ArchiveYear
View 1 Replies
View Related
May 6, 2014
I would like to generate a working schedule for employees for x-days ahead based on a starting date that the user can enter.
I have got 3 relevant tables:
1. Table X with (1) resourcenumber, (2) starting date working schedule and (3) the daynumber representing the starting date (this is ISO so 1 for Monday, 2 for Tuesday etc.)
2. Table Y has the schedule itself and can hold a 7-days schedule or a 14-days schedule. In case of 7 days schedule there a 14 (!) records with (1) resourcenumber, (2) daynumber, (3) starting hour a.m. (4) ending hour a.m (5) starting hour p.m and (6) ending hour p.m. In case of a 14-days schedule there are 28 records (a.m. and p.m. records)
3. Table Z with resource data.
An example to clarify (for fake employee 100):
Table X:
Resource: 100
Starting date: 2012-03-01 (from this date the schedule will be effective)
Daynumber: 4 (2012-03-01 was a Thursday)
Table Y (Resource has a 14 days schedule because per 2 weeks Monday is an off-day):
Record 1 shows: Resource: 100, Daynumber: 1 (= Monday, working day), AM-Starting hour: 09:00, AM-Ending hour: 13:00, PM-starting hour: 13:30, PM-ending hour: 17:30
Record 2: same but daynumber is 2
Record 3: same but daynumber is 3 etc.
...
Record 8 shows: Resource: 100, Daynumber: 8 (= Monday, off-day), AM-Starting hour: 00:00, AM-Ending hour: 00:00, PM-starting hour: 00:00, PM-ending hour: 00:00
Record 9: same as record 2 but daynumber is 9.
etc.
...
Record 14: same as record 7 but day is 14 (= last day)
The weekend days show as 00:00 for the hours (same as day 8 in example)
I generated the working schedule with a CROSS APPLY function based on the starting date and the x-number of days ahead.
I then evaluate the actual daynumber corresponding with that date with the daynumber in table Y. That works fine with a 7-days schedule but I can't get it fixed with a 14-days schedule. Day 8 in that schedule represents an actual day 1 but how do I know what actual date day 8 is ... I think I have to start with the starting date in table X ...
I think ideally I would like to have the generated days as follows (as an example in case of a 14-days schedule starting 2014-05-01 for 30 days ahead):
2014-05-01 = day 4 (= actual daynumber)
2014-05-02 = day 5
2014-05-03 = day 6
...
2014-05-10 = day 13
2014-05-11 = day 14
2014-05-12 = day 1
2014-05-13 = day 2
2014-05-14 = day 3
...
2014-05-24 = day 13
2014-05-25 = day 14
2014-05-26 = day 1
2014-05-27 = day 2
...
2014-05-31 = day 6
With this done I can compare the actual daynumber with the daynumber in Table Y.
The rownumber that the CROSS APPLY function generates has to be reset to 1 after day 14. I tried PARTITION BY in THE ROW_NUMBER function but to no avail ... The only field I can partition by is the maximum value of the daynumber (14 is the example) but that is not allowed in the rownumber function.
View 0 Replies
View Related
Aug 14, 2014
Let us assume that there are 100 employee in a company. And sum of salary of all employee is 10000. Find list of highest paid employees whose sum of salary is 8000. Remaining employee will fall in 20% bracket.
View 4 Replies
View Related
Oct 21, 2015
I am trying to move files to directories based on the file status. If the file contains the Flag='E' then I want to move it to an "Error" folder, otherwise it will go to a "Processed" folder.
Here is my current code:
DECLARE @cmd varchar(500)
SELECT
CASE
WHEN Processed_Flag = 'E'
THEN
SET @cmd='MOVE /Y C: empmyfiles*.dat C: empmyfilesError'
ELSE
SET @cmd='MOVE /Y C: empmyfiles*.dat C: empmyfilesProcessed'
END
FROM#TEMP
PRINT @Cmd
View 2 Replies
View Related
Jan 9, 2015
Ok I have a query "SELECT ColumnNames FROM tbl1" let's say the values returned are "age,sex,race".
Now I want to be able to create an "update" statement like "UPATE tbl2 SET Col2 = age + sex + race" dynamically and execute this UPDATE statement. So, if the next select statement returns "age, sex, race, gender" then the script should create "UPDATE tbl2 SET Col2 = age + sex + race + gender" and execute it.
View 4 Replies
View Related
Sep 12, 2005
Posted - 09/12/2005 : 15:16:05
--------------------------------------------------------------------------------
Hi
I have a schema XXX. This schema owns a set of tables say XXX.A, XXX.B and XXX.C.
I have a login XXX mapped to the user XXX.
When I connect to the SQL Server using login XXX and execute the query.
Select * from A, it throws be an error saying that"Invalid Object Name A".
Now when I modify the select statement specifying the schema it works. i.e. Select * from XXX.A
In the former case, is it not that SQL Server tries to search for the table in the current user's account and then if it not available it look's in the dbo's account.
HOw can I make a select without specifying the schema ?
I am using SQL Server 2005.
Thanks & Regards
Imtiaz
View 4 Replies
View Related
Jul 15, 2013
I have this column Sdate in my Employees table. This value represent the start date working.
I need to get all of the employees that between 8 and 10 month of work from today. How can I do it?
View 3 Replies
View Related
Mar 25, 2014
Am customizing SQL server MGMT tools 2012 for Mass deployment.Client had asked to remove Customer Feedback option from help menu.how to disable that.
View 6 Replies
View Related
Mar 12, 2015
In SQL 2005 if i was trying to insert some data with a text qualifier inside a text qualified field, it would work, for example:
"Name","ID ","Location","","Comany",""House Name" Road",
In SQL 2012, this fails with the error message, cannot find the text qualifer for field.
To get around this, we are having to import the data into a Dirty Data column of aTEMP table, ID, Dirty Data, Clean data - perform multiple updates and change the text qualifier and ensure they are only changed in the right places so we can keep the ". In this example, we changed the text qualifier to PIPES.
After these updates, we then export the data from CLEAN data back out to CSV, then reimport it into the origional destination table with a new text qualifer.
View 5 Replies
View Related
Aug 18, 2014
trying to create indexes on two tables:
SF_Affiliate_Customer
SF_Affiliate_Customer_Account
on which the following query is based. I need to build indexes so that the query will perform better. Now its very slow..
SELECT DISTINCT C.[afflt_cust_natl_key],[as_of_dt]
FROM [dbo].[SF_Affiliate_Customer] C
WHERE
( [afflt_intrnl_cust_ind] = 'N'
AND [afflt_empl_ind] = 'N'
AND (ISNULL([phys_addr_st_rgn_cd],'')<>'CA' AND ISNULL([mlng_addr_st_rgn_cd],'')<>'CA')
)AND
[code].....
View 3 Replies
View Related
Jan 13, 2015
We have customer accounts that we measure usage. We want to run a report for all customers whose current usage is 0 and a count of how many months it has been zero consecutively. Here is an example.
declare @YourTable table (
CustomerID int,
ReadDate datetime,
usage int
)
insert into @YourTable select 1,' 1 mar 2014',0
insert into @YourTable select 1,' 1 feb 2014',0
[Code] ....
This should return
1,3
2,1
This is what I am currently using but it isn't working right
WITH cte
AS
(
SELECT *,COUNT(1) OVER(PARTITION BY cnt,CustomerID) pt FROM
(
SELECT tt.*
[Code] .....
View 9 Replies
View Related
Mar 10, 2015
I have the table below and want to show the prop_code if the rent_review_date count is less than 1 in 12 months. This means to show only propcode if there has not been any rent update since the first rent_review_date
DECLARE @table TABLE
( Prop_Code INT
,Current_Rent INT
,Revised_Rent INT
,Rent_Review_Date varchar(10)
,Rent_Review_Time DATEtime)
[Code] .....
View 6 Replies
View Related
Sep 20, 2015
There is a STIG Check that does not allow grant "Connect SQL" directly to any logins except SQL System and the SA account. My way of resolving this is to do the following:
Step One:
We create a Server Role called SQL_APPLICATIONS – for the application accounts
We create a Server Role called SQL_DBA – for the DBA accounts
and give them direct “Connect SQL’ server permissions. MAKE THE ROLE OWNER = sysadmin (group)
Note: I think that creating a Server Role is only available starting with SQL Server 2012, but not sure. I am using SQL 2012
Step two:
I add the members (Logins - SQL & Windows) – in this case any application accounts and DBA accounts to the new roles respectively
Step three:
I remove the “Connect SQL” Permission from each Login
The first problem i noticed is that the maintenance plans failed with "The owner domainusername of job db_backup does not have server access.I am currently using a test system and wondered If you think I will have trouble with the application connecting when I try and implement on the production systems.
View 3 Replies
View Related
Feb 17, 2014
I have two tables with this info:
TABLE 1
COL1 COL2 COL3
AAA BBB CCC
QQQ WWW EEE
AAA SSS DDD
WWW EEE RRR
BBB BBB BBB
TABLE 2
COL1 COL2 COL3 COL4
b b b 343
a a a 344
c c c 345
d d d 346
e e e 347
I want to insert TABLE 1 into TABLE 2 with a query that will auto increment to COL4 looking like this:
COL1 COL2 COL3 COL4
b b b 343
a a a 344
c c c 345
d d d 346
e e e 347
AAA BBB CCC 348
QQQ WWW EEE 349
AAA SSS DDD 350
WWW EEE RRR 351
BBB BBB BBB 352
I know this can be done easily by just altering the column to have an auto-increment datatype, but I currently cannot do that at this moment.
View 5 Replies
View Related
Feb 19, 2014
CREATE TABLE #Names
( ID INT IDENTITY(1,1),
NAME VARCHAR(100)
)
INSERT INTO #Names VALUES ('S-SQLXX')
INSERT INTO #Names VALUES ('S-SQLXX.NA.SN.ORG')
INSERT INTO #Names VALUES ('S-SQLYY')
INSERT INTO #Names VALUES ('S-SQLYY.NA.SN.ORG')
INSERT INTO #Names VALUES ('S-SQLCL-HR')
INSERT INTO #Names VALUES ('S-SQLCL-MIS')
SELECT * FROM #Names
--I want to filter out S-SQLXX.NA.SN.ORG because S-SQLXX.NA.SN.ORG is a duplicate of S-SQLXX eliminating .NA.SN.ORG from it.
--I want to filter out S-SQLYY.NA.SN.ORG because S-SQLYY.NA.SN.ORG is a duplicate of S-SQLYY eliminating .NA.SN.ORG from it.
--However I want to keep S-SQLCL-HR and S-SQLCL-MIS in my list of names as they do not have .NA.SN.ORG as a part of their name
--I want ONLY these returned IN the SELECT
SELECT * FROM #Names WHERE ID IN (1,3,5,6)
DROP TABLE #Names
View 1 Replies
View Related
Feb 21, 2014
I am trying to update records based on the results of a query with a subquery.
The result set being produced shows the record of an item number. This result produces the correct ItemNo which I need to update. The field I am looking to update is an integer named Block.
When I run the update statement all records are updated and not the result set when I run the query by itself.
Below you will find the code I am running:
create table #Items
(
ItemNovarchar (50),
SearchNo varchar (50),
Historical int,
Blocked int
[Code] ....
Below is the code I am using in an attempt to update the block column but it updates all records and not the ones which I need to have the Blocked field set to 1.
Update #items set Blocked = 1
Where Exists
(
SELECT ItemNo=MAX(CASE rn WHEN 1 THEN ItemNo END)
--,SearchNo
--,COUNT(*)
[Code] ...
Why is the update changing each record? How can I change the update to choose the correct records?
View 6 Replies
View Related
Feb 25, 2014
I have a very simple query like the following…
SELECT table2.column_code2,
table2.column_description2,
table2.column_code1,
table1.column_description1
FROM database_001.table2 table1 LFET OUTER JOIN database_001.table2 table1 on (table2.column_code1 = table1.column_code1)
From this query, its returning me a result set of something like below:
--------------------------------------------------------------------------------------------------
column_code1 column_description1 column_code2 column_description2
--------------------------------------------------------------------------------------------------
RO1 BOOK RL1 PDF/ECOPY
RO2 PAPER RL2 CONFERENCE
RO5 JOURNAL RL11 OTHER
Now, on the above query I want to insert three extra columns with the name (status, location and contact) where the results in the extra three columns would be based on the conditions I want to define in the query based on the above results…
Something for example (I am not trying to write a condition: my question is how to write it),
if column_code1 = RO1 and column_description2 = PDF/ECOPY on status column it should return a value ‘ONLINE’ & on location column it should return ‘WEB’ and on contact column it should write ‘BOB’.
Also, if column_code1 = RO5 and column_description1 = JOURNAL on status column it should return a value ‘ON PRESS FOR PRINT’ & on location column it should return ‘S.R STREET, LONDON’ and on contact column it should write ‘SMITH’ like below result…so the final output should be the top four columns and the extra three columns…
See the attachment for better formatting...
---------------------------------------------------------------------------------------------
status location contact
---------------------------------------------------------------------------------------------
ONLINE WEB BOB
ON PRESS FOR PRINT S.R STREET, LONDON SMITH
View 7 Replies
View Related
Sep 24, 2014
I've two tables A, B. In A table, I need to define the primary key with combination of 2 columns and this Primary Key will be a foreign key in table B. Based on these PK and FK I'll be writing a join to get the second column in table B.
View 0 Replies
View Related
Oct 8, 2014
I have a table that looks like below.
DECLARE @Tree TABLE
(
NAME VARCHAR(100),
[LEVEL] INT
)
INSERT INTO @Tree
SELECT 'ABCD', 1
UNION
SELECT 'ABBBCDD', 2
UNION
SELECT 'AABBCCDD', 2
UNION
SELECT 'AAAABBBBCCCCDDDD', 3
My question is based on the Level, I want to append that many _(underscores) before the name.
Eg : for level 3 I want the name as ___AAAABBBBCCCCDDDD.
I was thinking to insert this into a temp table and call a while statement based on the number.
View 2 Replies
View Related
Nov 10, 2014
I am wanting to creating a column based on a value in a flatfile, and insert that value into the destination table...
I have a flatfile and a oledb destination, I dropped a script component on the dataflow tab, and I am wanting to take an existing field and create a for lack of a better word, "CODE" field based on that value. How would I accomplish this?
Example--- where description = Test1 code = 1, Test2 code = 2, and same thing for Test3
Description code
Test1 1
Test2 2
Test3 3
View 6 Replies
View Related
May 7, 2015
I would like to replace the value in the Select query of CO OWNER with a space ' ' or NULL if the ORDINAL value = 0.
The CO OWNER name is stored in the CARDNAME table, and the OWNER name is stored in the NAME table. I can not change the db structure.
JEAN is the ACCOUNT owner and BILL is CO OWNER of two cards.
Current Select Results:
ACCOUNT CARD ORDINAL CO OWNER OWNER
200500 9999999999999100 2 BILL JEAN
200500 9999999999999101 1 BILL JEAN
200500 9999999999999102 0 BILL JEAN
Desired Select Results:
ACCOUNT CARD ORDINAL CO OWNER OWNER
200500 9999999999999100 2 BILL JEAN
200500 9999999999999101 1 BILL JEAN
200500 9999999999999102 0 NULL JEAN
Current SQL Select statement:
SELECT DISTINCT
CARD.PARENTACCOUNT AS ACCOUNT,
CARD.NUMBER AS CARD,
CARD.ORDINAL,
CARD.STATUS,
CARDNAME.FIRST AS CO_OWNER,
[code]....
View 9 Replies
View Related
Sep 15, 2015
Lets say I have a set of columns as follows:
Table.Name - Table.ID - Table.Code
I want to write a query that will cycle through the results and if it comes across another record that has a matching Table.ID I want to exclude that row from the result set.
I am not all too familiar with how to use either a Case or If..Else Statement within a Sql statement that would accomplish this.
View 7 Replies
View Related
Sep 29, 2015
I have a table that has multiple transactions for stock items.
This table holds all records relating to items that are inducted onto the system and there movement. For each stock item i am interested in getting the drop destination, if it has one, and only when it follows the sequential order of "Inducted>OnTransport>Dropped" (this sequence isn't always the case). Also note the CreatedDate for the Inducted and OnTransport records for the valid sequences are always the same. Below is a valid sequence for a stock item so i would want to return 'Lane01' for the Destination of this occurrence of the stock item, if this item didn't have a valid drop location then destination would be blank. Also note each stock item can be inducted more than one time per-day.
I think i have managed to build the below sql but it will only do one item at a time, so would have to wrap it in a function. Is there a way of writing a set based select statement that gets all the inducted items and for the ones that do follow the "Inducted>OnTransport>Dropped" return the destination it was dropped at? I've attached scrips below:
DECLARE @StockItemID nVarchar(128)
DECLARE @CreateDate DATETIME
Set @StockItemID='8cbe17da-6079-4170-b27a-41c0d38830f6'
Set @CreateDate = CAST('2015-08-31 13:52:39.890' AS datetime)
[Code] ....
View 9 Replies
View Related
Mar 19, 2014
create table #sample
(
Name varchar(100),
value int
[code]....
From that I wanted to delete some records based on following condition. randomly select any number of records but sum(value) = 125 and name = xxx
View 2 Replies
View Related
Jul 31, 2014
I have a data set that looks something like like this:
Row# Data
1 A
2 B
3 B
4 A
5 B
6 B
7 A
8 A
9 A
I need wanting to assign a group ID to the data based on consecutive values. Here's what I need my data to look like:
Row# Data GroupID
1 A 1
2 B 2
3 B 2
4 A 3
5 B 4
6 B 4
7 A 5
8 A 5
9 A 5
You'll notice that there are only two values in DATA but whenever there is a flip between them, the GroupID increments.
View 2 Replies
View Related
Aug 15, 2014
New column calculation
CREATE TABLE MAIN
(
ORDERNO VARCHAR(20),
LASTUPDATEDDATE DATE,
ORDERCLIENTINITIALFEE NUMERIC ,
[Code] .....
---OUTPUT
--=======
INSERT INTO MAIN VALUES ('1000', '1/1/2014',3000,1000,700,1500)
INSERT INTO MAIN VALUES ('1000', '3/5/2014',1000,2000,650,200)
INSERT INTO MAIN VALUES ('1000', '5/10/2014',500,5000,375,125)
INSERT INTO MAIN VALUES ('1000', '11/20/2014',100,2000,400,300)
INSERT INTO MAIN VALUES ('1000', '8/20/2014',100,3500,675,1300)
[Code] ....
View 2 Replies
View Related
Aug 25, 2014
We have a database and have 6-7 growing tables. All the tables have Primary and foreign key relation. I want to do partition based on the date column.
I need 3 partitions
First partition has to hold present data
second partition need to hold the previous year data (SAS storage)
Third partition need to hold all the old data and need to be in the archive database
I understand that first we need to disable the constraints (Indexes PK & FK)
Then create partition function and partition schema
Then Create the Constraints again
View 9 Replies
View Related
Nov 12, 2014
I am working on a sql data that has a list of product names, shipment type and the count of shipments. The values are listed as rows in the database. it will be in the below format.I want to transpose only the shipment type and the corresponding count of each product name in the below format.I tried to do this but i am not able to achieve in the correct format.
View 6 Replies
View Related
Dec 19, 2014
I have a requirement regarding a color combination data. I have a lookup table that holds a colorid, p1, p2, p3, p4 to p8 which will be having colors Red, Green and Amber. P1 to P8 columns holds these three colors based on their combinations.
I have attached the look up table data for reference.I need to pass the color values to p1 to p8 and need to retrieve the color id based on the passed color. If we pass values for all p1 to p8 then it is easy to get the color code, however it will not happen. The passed values may be dynamic. ie we will not have all 8 values all the times. sometimes we will have 2 colors passed, sometimes 5 colors will be passed.
If i pass only two colors say red and red, i need the color id of only the row that has red and red for p1 and p2 alone. i dont want want all the colorid's that has red and red in p1 and p2 and some other colors in p3 to p4.
The exact colorid of the combination must be returned on passing the values to p1 and p2.I am passing Red and Red as values to P1 and P2. In the look up table we can have 10 rows that has red and red i p1 and p2 like
colorid p1p2p3p4p5p6p7p8
1 redred
10 redredred
20 redredred
30 redredredred
40 redredredredred
50 redredredredredred
60 redredredredredredred
70 redredredredredredredred
So the result must have only the colorid 1 and not all the colorid's listed above. when I pass 3 red as values for p1, p2, p3 then the result must be 10. Colorid 1, 20, 30, 40, 50, 60 and 70 must not come in the result.I need a function or procedure that will accept the arguments and provide me the result based on the values.
View 2 Replies
View Related
Jul 1, 2015
I have a client data which has the candidate id, a start date which will have only the date in varchar format and a time value associated to that date in varchar format in a seperate column.
To give a brief explanation about the data a candidate will come to study center at any time point in a day for example 10:00 AM on 20-10-2014. The start date will be 20-10-2014 and from 10:00 AM he will have test based on the time point. So if the time point is 2 HR, then at 12:00 PM he will have a test. If the time point is 8 HR, it will get added with 10:00 AM and based on this he will have the test at 06:00 PM. When the timepoint reaches 00:00 the start date needs to be the next date instead of 20-10-2014.
The start date needs to be appended with the time value such that when it crosses over the time 00:00, the start date needs to get increased by 1 ie the next day. I have added the start date to the time by using the code below
CAST(STARTDATE as datetime) + CAST(CAST(STUFF([TIME],3,0,':') as time(0)) as datetime) as [EXPECTEDDATETIME]
By this above code i have created the expected datetime however
I will not be able to hardcode the value due to dynamic data. I tried to apply >= and < to the time value something like
case when MyTime >= '00:00' and MyTime < '08:10' the Dateadd(day, 1, date)
This works perfect but my concern is that I cannot put the value 08:10 because it will not a constant value for all rows.
I have provided a screenshot of my data and a expected date column for reference.
Candidate StartDateStartTimeExpected DateTime Timepoint
1 20141020 1000 2014-10-20 10:00:00 0 HR
1 201410201200 2014-10-20 12:00:00 02 HR
1 201410201400 2014-10-20 14:00:00 04 HR
1 201410201800 2014-10-20 18:00:00 08 HR
1 201410200000 2014-10-21 00:00:00 12 HR
1 201410201200 2014-10-21 12:00:00 24 HR
2 20141020 1100 2014-10-20 11:00:00 0 HR
[Code] ....
I have also attached the data for reference.
View 9 Replies
View Related
