I have a column that is an int field and it holds the number of seconds that corresponds to a time during the day. Example being that 24331 will be 6:45:31 AM and 67531 will be 6:45:31 PM. I'm looking for code that will show the time in AM/PM format and with the AM and PM at the end of time.
View 5 Replies
I have a Stored Procedure that has a query in it and it take 0 second and then a stored procedure that takes 16 seconds. From what I can tell they shoul be the same.
It doesn't recompile when i run the stored procedure, I checked that.
Is it possible to change the default detection interval time to reduce to less than 5 seconds.
We have latency in trouble shooting the deadlocks and causing blockings more on our critical Production server.
I am running some new queries in SQL 2012 (in SSMS) and, while slow, they do run. If I try to use the same query to create a view it persists in timing out in about 30 seconds. I see very little on this subject via google.
View 9 Replies View RelatedHi all.If I've got a query which has a field with seconds in it... how will I usethe Convert function to get my field converted to the format: HH:MM:SS ?The field with the seconds in is called: "Diff"Thanks alotRudi
View 2 Replies View RelatedI am developing a form for a mortgage company. There can be any number of borrowers on a given loan, and the business has asked that this form return only 2 borrowers at a time for a loan. For example, if there are 3 borrowers for a loan, they want the first copy of the form to print the first 2 borrowers and then another copy of the form to print the 3rd. No matter how many copies are printed, they want the borrower information to be labeled as 'Borrower1' xyz and 'Borrower2' xyz. Also, there will be a LOT more fields returned on the real form, so the sample information below is very simplified test data.
Sample Data:
CREATE TABLE #t (LoanID VARCHAR(5), BorrowerName VARCHAR(20), BorrowerOrder INT);
GO
INSERT INTO #t VALUES
('::E', 'John Smith', 0)
, ('::E', 'Jane Smith', 1)
, ('::E', 'Rob Jackson', 2)
, ('AF_CF', 'Sloan Burton', 1)
[code]...
I don't want that 2nd record to return. This result is what makes me think of gaps and islands, but I don't know if the 2nd record is really an island since it's (1) not stored this way...it's returning this way because of the query and (2) it's not sequential data..I tried restricting this by putting this into a CTE and then returning only the odd numbered records like I have below. This runs pretty quickly when dealing with one loan. But...I am concerned that the CTE will be slow when we run batches of loans.
Attempt with CTE:
--With CTE
;WITH cte AS
(SELECT
Borrower1 = BorrowerName
, Borrower2 = LEAD(BorrowerName) OVER(ORDER BY BorrowerOrder)
, RowNumber = ROW_NUMBER() OVER(ORDER BY BorrowerOrder)
[code]...
Is there a better, cleaner way to do this? Or is the CTE the best way to go?
Sample Table
USE [Testing]
GO
/****** Object: Table [dbo].[Testing] Script Date: 4/25/2014 11:08:18 AM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
[Code] ....
It seems to work fine with one million records.
Each primary key is unique, but the begindate is non-unique, and i guess even if i use datetime2 and add nanoseconds, from what i have read, there is a chance that i could have a duplicate datetime since the date is imported via XML from multiple sources.
I've got a column that holds a time value in Integer form as a number from midnight (IE military time) with no leading 0s or colons.
0 = 00:00
30 = 00:30
...
1700 = 1700 etc...
How can I convert this to a real time field?
I need my code to add the varchar CPUTM field + varchar CPUZIPTIM field which both has time values to see if greater than 2 hours. How do I do this when both fields are varchar. The value in CPUTM field is 335:55:20.97 duration time. My code is below.
CPUTM = 335:55:20.97 duration time
CPUZIPTM = 0:00:01.96 duration time
select * FROM [SMF_DATA].[dbo].[System_Management_Facility]
WHERE ((convert(varchar(13), CONVERT(time, CPUTM) + CONVERT(time, CPUZIPTM))) > '02:00:00.00')
I have a series of time from 08:10 till 00:55 and a single date in a seperate column. What I need to have is associate the date with each time from 08:10 and when it comes after 23:55 the date needs to be incremented to the next day.
something like below
29Jun2015 08:10
29Jun2015 08:15
29Jun2015 08:20
29Jun2015 08:25
29Jun2015 08:30
29Jun2015 08:35
29Jun2015 08:40
.....
.....
....
....
29Jun2015 23:55
30Jun2015 00:00
30Jun2015 00:05
30Jun2015 00:10
30Jun2015 00:15
30Jun2015 00:20
I tried to add the based on the datepart minute however its getting added only to 00:00 and not after that.
I have an asp.net 4.5 webpage that has a detailsview on it that has a bound field that points to a SQL Server 2012 datetime field (CompDate). This field is supposed to capture date AND time of completion of a record (this is a data gathering project).
<asp:BoundField DataField="CompDate" HeaderText="CompDate" SortExpression="CompDate" Visible="False" />
The code that inserts the datetime:
If e.NewValues.Item("Complete") = True Then
Dim dt As DateTime = Now
e.NewValues("CompDate") = dt
e.NewValues("UNAME") = Membership.GetUser.ToString
End If
Everything works great, except when the captured date/time is sent to sql server, the time portion is getting dropped and only zeros are getting stored in the time portion.
Results:
CompleteUNameCompDate
1 CarlR 2015-08-04 00:00:00
I've tried different formatting options and converting to string..
I have string as '1-12-2012', i wanted to convert it into date as format '2012-12-01'. I used the function as cast('1-12-2012' as Date) it's working but for a set of values where Null occurs it gives error as conversion failed when casting date and/or time from character string.
View 5 Replies View RelatedI need to take a temporary table that has various times stored in a text field (4:30 pm, 11:00 am, 5:30 pm, etc.), convert it to miltary time then cast it as an integer with an update statement kind of like:
Update myTable set MovieTime = REPLACE(CONVERT(CHAR(5),GETDATE(),108), ':', '')
how this can be done while my temp table is in session?
How to convert bigint time to datetime (CST)
Declare @MyBigIntTime BIGINT =1397750400000
I have a lot of rows of hours, set up like this: 0745, 0800, 2200, 1145 and so on (varchar(5), for some reason).
These are converted into a smalldatetime like this:
CONVERT(smalldatetime, STUFF(timestarted, 3, 0, ':')) [this would give output like this - 1900-01-01 11:45:00]
This code has been in place for years...and we stick the date on later from another column.
But recently, it's started to fail for some rows, with "The conversion of a varchar data type to a smalldatetime data type resulted in an out-of-range value".
My assumption is that new data being added in is junk. If I query for these values and just list them (rather than adding a column to convert them also) that's fine, of course. I've checked all the stuffed (but not yet converted - so 11:45 rather than 1145) output to see if it ISDATE(), and it is. There are no times with hours > 23 or minutes greater than 59 either.
If I add the CONVERT in, we see the error message. But here's the oddity, if I place all of the rows into a holding table, and retry the conversion, there is no error. It's this last bit that is puzzling me. Plus I can't see any errors in the hours data that would cause a conversion problem.
I've put the whole of this into a cursor to try to trap the error rows too, but all processes fine. Why would it fail if NOT in a cursor?
I am looking to be able to add 15 minutes to a time value that is in character format. here is sample data:
0530
0545
0600
0615
0630
0645
0700
0715
0730
0745
Whenever there is a leading zero, I need to preserve that as well. Here is an example of what I an looking for:
0545 + 15 = 0600
0600 + 15 = 0615
1345 + 15 = 1400
I have a table of People and their ID, the starting month (a fixed number of months, say 10 for this), the ending month, and the percent of work time (0-1 being 0-100%). If they have a % work of 0, I do not want to see anything. But if the % changes, from say .5 to .75, I would need the first and last month they were at .5, and the first and last month they were at .75
The Table:
/****** Object: Table [dbo].[TestProject] Script Date: 02.07.2014 10:15:08 ******/
IF OBJECT_ID('TempDB..#TestProject2','U') IS NOT NULL
DROP TABLE [dbo].[#TestProject2]
GO
CREATE TABLE [dbo].[#TestProject2](
ID INT IDENTITY(1,1) PRIMARY KEY CLUSTERED,
[Code] ....
The data:
--===== All Inserts into the IDENTITY column
SET IDENTITY_INSERT #TestProject2 ON
INSERT INTO #TestProject2
("ID","PersonID", "PercentLoad","MonthID")
SELECT 1,123456,0,1 UNION ALL
[Code] ....
EXPECTED RESULT:
Person ID StartMonth EndMonth LOADPCT
123456 3 4 .5
123456 5 6 1
654321 1 2 1
654321 4 4 .5
654321 5 6 .75
654321 7 9 .5
Looking for returning multiple entries from a time span. I have a date, start-time, end-time and duration. I need the start-times separated in a list. It's fine if temp tables are needed - I have that clearance.
Entry might look like:
(datetime) date: 7/10/2014
(int) start-time 820
(int) end-time 1000
(int) duration 20
The result would needed:
(datetime) 7/10/2014 08:20:00
(datetime) 7/10/2014 08:40:00
(datetime) 7/10/2014 09:00:00
(datetime) 7/10/2014 09:20:00
(datetime) 7/10/2014 09:40:00
I am having 100 of flat files need to load in respective staging table.I want to create table on run time as per filename input.suppose if input filename is ABC then table name should be Staging_ABC if file name is XYZ then it should be Staging_XYZ.Table structure is below need to create at run time
CREATE TABLE Staging_'Filename'(
[COL001] [varchar](4000) NULL,
[Id] [int] IDENTITY(1,1) NOT NULL,
[LoadDate] [datetime] NOT NULL default getdate()
)
I need to provide a minimum value over a 12 hour time range of data. I'm struggling with performance issues due to the amount of data. Currently I log about 100 devices reporting once per minute into a table. Also about once per minute I need to pull the minimum value reported for each device in the last 12 hours. Currently I'm maintaining a separate table with entries for just the last 12 hours and just performing a Select Min(Temp) Where DeviceID=x, but it already holds about 700,000 records at any given time. The number of devices will increase substantially and this will no longer be viable.
Sample Table
ID DeviceID Temp InsertDate
1 10 55 04-28-2015 8:00 AM
2 65 74 04-28-2015 8:00 AM
3 44 23 04-28-2015 8:00 AM
4 10 87 04-28-2015 8:01 AM
5 65 65 04-28-2015 8:01 AM
I am trying to calculate the time difference between the value in the row and the min value in the table. So say the min value in the table is 2014-05-29 14:44:17.713. (This is the start time of the test.) Now say the test ends at 2014-05-29 17:10:17.010. There are many rows recorded during that start and end time, for each row created a time stamp is created. I am trying to calculate the elapsed time and have it as a row in the results.
min(timestamp) - timestamp(value in row) = elapsed time for that test
where Channel = '273'
Here is the table DDL
CREATE DATABASE SpecTest;
USE SpecTest
GO
CREATE TABLE [dbo].[Spec1](
[Spec1ID] [int] IDENTITY(1,1) NOT NULL,
[Channel] [int] NOT NULL,
[Code] ....
Here is some dummy data to use
INSERT INTO Spec1 (Channel, Timestamp, Lambda, Power)
VALUES(273, '2014-05-29 14:44:17.713', 800, '-64.91');
INSERT INTO Spec1 (Channel, Timestamp, Lambda, Power)
VALUES(273, '2014-05-29 15:05:09.507', 800, '-59.11');
INSERT INTO Spec1 (Channel, Timestamp, Lambda, Power)
[Code] ....
Example desired results (I hope the formatting works)
Channel | Timestamp | Lambda | Power | Elapsed_Time
______________________________________________________________
273 | '2014-05-29 14:44:17.713', | 800, | '-64.91' | 0
273 | '2014-05-29 15:05:09.507', | 800, | '-64.91' | 00:20:51
273 | '2014-05-29 15:26:00.520', | 800, | '-64.91' | 00:41:42
273 | '2014-05-29 16:28:34.213', | 800, | '-64.91' | 01:44:16
273 | '2014-05-29 16:49:25.853', | 800, | '-64.91' | 02:05:08
273 | '2014-05-29 17:10:17.010', | 800, | '-64.91' | 02:25:59
I have a client data which has the candidate id, a start date which will have only the date in varchar format and a time value associated to that date in varchar format in a seperate column.
To give a brief explanation about the data a candidate will come to study center at any time point in a day for example 10:00 AM on 20-10-2014. The start date will be 20-10-2014 and from 10:00 AM he will have test based on the time point. So if the time point is 2 HR, then at 12:00 PM he will have a test. If the time point is 8 HR, it will get added with 10:00 AM and based on this he will have the test at 06:00 PM. When the timepoint reaches 00:00 the start date needs to be the next date instead of 20-10-2014.
The start date needs to be appended with the time value such that when it crosses over the time 00:00, the start date needs to get increased by 1 ie the next day. I have added the start date to the time by using the code below
CAST(STARTDATE as datetime) + CAST(CAST(STUFF([TIME],3,0,':') as time(0)) as datetime) as [EXPECTEDDATETIME]
By this above code i have created the expected datetime however
I will not be able to hardcode the value due to dynamic data. I tried to apply >= and < to the time value something like
case when MyTime >= '00:00' and MyTime < '08:10' the Dateadd(day, 1, date)
This works perfect but my concern is that I cannot put the value 08:10 because it will not a constant value for all rows.
I have provided a screenshot of my data and a expected date column for reference.
Candidate StartDateStartTimeExpected DateTime Timepoint
1 20141020 1000 2014-10-20 10:00:00 0 HR
1 201410201200 2014-10-20 12:00:00 02 HR
1 201410201400 2014-10-20 14:00:00 04 HR
1 201410201800 2014-10-20 18:00:00 08 HR
1 201410200000 2014-10-21 00:00:00 12 HR
1 201410201200 2014-10-21 12:00:00 24 HR
2 20141020 1100 2014-10-20 11:00:00 0 HR
[Code] ....
I have also attached the data for reference.
This store procedure will get some executable queries from the select statement, the cursor will fetch each rows to execute the query and insert the queries into table_3 to mark as 'E'. Until 17:00, this store procedure will stop execute the queries and just get the queries from select statement insert into table_3 to mark as 'C'.
I don't know why the outputs in table_3 are quiet different than I think. This store procedure comes out with two exactly same queries and one marked as C and another marked as E.
CREATE PROCEDURE procedure1
AS
DECLARE cursor_1 CURSOR FOR
SELECT
'This is a executable query'
FROM table_1
DECLARE @table_2
[code]....
I have a table that stores working hrs, such as
RecID,StaffID,StartDate,EndDate
17,969,2015-05-18 00:00:00.000,2015-05-18 06:00:00.000
18,969,2015-05-18 18:00:00.000,2015-05-19 06:00:00.000
19,969,2015-05-19 18:00:00.000,2015-05-20 06:00:00.000
20,969,2015-05-20 18:00:00.000,2015-05-21 06:00:00.000
21,969,2015-05-21 18:00:00.000,2015-05-22 06:00:00.000
22,969,2015-05-22 18:00:00.000,2015-05-23 06:00:00.000
23,969,2015-05-23 14:00:00.000,2015-05-24 08:00:00.000
24,969,2015-05-24 22:00:00.000,2015-05-25 00:00:00.000
So working times can go over midnight, there can be more than one working period in a day etc.
For this staff member the summary of the weeks work will be
18/05/2015 - 12 hrs
19/05/2015 - 12 hrs
20/05/2015 - 12 hrs
21/05/2015 - 12 hrs
22/05/2015 - 12 hrs
23/05/2015 - 16 hrs
24/05/2015 - 10 hrs
Now for the complicated part, a person can take absence(sick,holiday,other) for any part of a day or whole day(s). For these absence periods only the worked time on that day needs to be negated off, not the whole period of time.
So for example
If this person
had a days holiday on the 22nd, shown in the HOLIDAY table as
StaffID,DateFrom, DateTo
969, 22/05/2015 00:00:00.000,22/05/2015 23:59:59.000
A Leave of Absence on the 20th, shown in the LEAVE table as
StaffID,DateFrom, DateTo
969,20/05/2015 12:00:00.000,20/05/2015 16:00:00.000
And was off sick on the morning of the 19th, shown in the SICKNESS Table as
StaffID,DateFrom, DateTo
969, 19/05/2015 00:00:00.000,19/05/2015 11:59:59.000
Now the Summary table should now show
18/05/2015 - 12 hrs
19/05/2015 - 6 hrs
20/05/2015 - 12 hrs
21/05/2015 - 12 hrs
22/05/2015 - 0 hrs
23/05/2015 - 16 hrs
24/05/2015 - 10 hrs
The 'Leave of Absence' on the 20th had no effect on the total for the day as it was between planned work times. how to do this within T-SQL, as simple as possible as I've got to had this code over to other staff members to maintain, who have not had much SQL experience yet?
I've tried doing it as a temp table, with dual insert/select commands, splitting the times over midnight, which partially worked but missed some of the combinations.
I have a stored proc that is executing in 2 sec on production and test database. It is taking more than a min on dev environment.
I have verified sqlserver version is same on both of the server.Prod is running on 2012Sp1 however dev don't have sp1. I am downloading it.
Both are 64bit, has same collation and compatibility level.I have confirmed that sp on both servers has same execution plan. I have reset and import stats from prod too.
I want to save every query executed from a given software, let's say Multi Script for example, and save in a table query text, execution time and rows count among other possible useful information. Right now I've created a sp and a job that runs every 1 milliseconds but I can't figure out how to get execution time and rows count. Another problem with this is that if the query takes too long I end up with several rows in my table.
View 5 Replies View RelatedI am having problems displaying time values in my SSRS report. below is info. Tried expressions still does not work. I want the values to show what in the SQL Server table 00:00:00.82. I tried stored proc still does not work.
SQL Server table time value shown in milliseconds:
00:00:00.82
Reporting Services report value shown:
00:00:00
I need to do some operations on a table when any user dont work with it.How do i do it?
Do i lock the table? and is it possible?(I dont want to deny permission from a user because cause error)
Can i do it with a open transaction ?
I need to do some operations on a table when any user dont work with it.How do i do it?Do i lock the table? and is it possible?
View 8 Replies View RelatedI have a sql snippet from a 3rd party application that will not complete its transaction. The SELECT statement executes but does not finish. Instead the statement just sits in AWAITING COMMAND for 1000 seconds then dies, thus killing the UPDATE statement that is supposed to follow.
The CROSS JOIN and CROSS APPLY seem suspect.
(
@p0 DATETIME,
@p1 INT,
@p2 INT,
@p3 NVARCHAR(4000),
@p4 INT,
[code]....
Hello,
I see the following error on the sql server log of one of our sql servers running sql 2000 with sp4.
SQL Server has encountered 1964 occurrence(s) of IO requests taking longer than 15 seconds to complete on file [h: empdb.mdf] in database [tempdb] (2). The OS file handle is 0x00000534. The offset of the latest long IO is: 0x0000002b09e000
Any idea as to what might be causing this error. Appreciate any comments.
Thanks!
We have an SSAS instance where when we run the query "select * from $system.discover_traces" the creation time in the resultset shows a different time from when we actually started the trace.
for example if we have create the trace at 3.30pm it shows 7.35 pm in the Sql server management studio resultset when we run the query "select * from $system.discover_traces".
I want to find out the time out errors for a particular SP. How to check that?
View 2 Replies View Related