DECLARE @Date
SET @Date = 2012
DECLARE @Year int
SET @Year = (SELECT DATEPART(yyyy,@Date))
SELECT @Year AS Year
--SELECT *
-- FROM [Orders].[dbo].[Orders] od
-- WHERE .Orderl_Date < @Date;
----WHERE DATEPART(yyyy,@Date)= @Year
----WHERE DATEPART(yyyy,od.Order_Date)= @ArchiveYear
I am trying to select records based on a year.
DECLARE @Date
SET @Date = 2012
DECLARE @Year int
SET @Year = (SELECT DATEPART(yyyy,@Date))
SELECT @Year AS Year
--SELECT *
-- FROM [Orders].[dbo].[Orders] od
-- WHERE .Orderl_Date < @Date;
----WHERE DATEPART(yyyy,@Date)= @Year
----WHERE DATEPART(yyyy,od.Order_Date)= @ArchiveYear
writing the query for the following, I need to collapse the continuity. If the termdate for an ID is one day less than the effdate of the next id (for the same ID) i need to collapse the records. See below example .....how should i write the query which will give me the desired output. i.e., get min(effdate) and max(termdate) if termdate is one day less than the effdate of next record.
ID effdate termdate
556868 1999-01-01 1999-06-30
556868 1999-07-01 1999-10-31
556869 2002-10-01 2004-01-31
556872 1999-02-01 2000-08-31
556872 2000-11-01 2004-01-31
556872 2004-02-01 2004-02-29
output should be ......
ID effdate termdate
556868 1999-01-01 1999-10-31
556869 2002-10-01 2004-01-31
556872 1999-02-01 2000-08-31
556872 2000-11-01 2004-02-29
I have a table that has multiple transactions for stock items.
This table holds all records relating to items that are inducted onto the system and there movement. For each stock item i am interested in getting the drop destination, if it has one, and only when it follows the sequential order of "Inducted>OnTransport>Dropped" (this sequence isn't always the case). Also note the CreatedDate for the Inducted and OnTransport records for the valid sequences are always the same. Below is a valid sequence for a stock item so i would want to return 'Lane01' for the Destination of this occurrence of the stock item, if this item didn't have a valid drop location then destination would be blank. Also note each stock item can be inducted more than one time per-day.
I think i have managed to build the below sql but it will only do one item at a time, so would have to wrap it in a function. Is there a way of writing a set based select statement that gets all the inducted items and for the ones that do follow the "Inducted>OnTransport>Dropped" return the destination it was dropped at? I've attached scrips below:
DECLARE @StockItemID nVarchar(128)
DECLARE @CreateDate DATETIME
Set @StockItemID='8cbe17da-6079-4170-b27a-41c0d38830f6'
Set @CreateDate = CAST('2015-08-31 13:52:39.890' AS datetime)
[Code] ....
create table #sample
(
Name varchar(100),
value int
[code]....
From that I wanted to delete some records based on following condition. randomly select any number of records but sum(value) = 125 and name = xxx
I have two queries that give me the total sales amount for the current year, and the last year.
SELECT SUM([Sales (LCY)])
FROM [$Cust_ Ledger Entry] cle
LEFT OUTER JOIN dw.dim.FiscalDate fd
ON fd.CalendarDate = cle.[Posting Date]
WHERE [Customer No_] = '10135'
AND fd.CalendarYear = '2013'
[Code] ....
I would like to learn how to be able to make this a single query and end up with two columns and their summed up totals. Like it shows on the attached image.
This is my query without the columns I need:
SELECT
c.CustomerNumber
,c.Name
,c.ChainName
,c.PaymentTermsCode
,cle.CreditLimit AS 'CreditLimit'
,SUM(cle.Amount) AS 'Amount'
[Code] ....
I have some my below requirment to loading some last year and currnet year records for some ID's in my table,
We have to load the ID's that are active at the end of the year for the prior year and ID's that are active as of today for the current year.Here is the scenario when the ID is currently terminated but active at the end of the prior year and the record is not in the table.so, we didn’t load the count for the prior year
Here prior year is 2015-2015 and Current year is 2015-2016
CREATE TABLE remp_year
(ID INT,
STATUS NVARCHAR(100) NULL,
START_DATE DATE NULL,
END_DATE DATE NULL,
date_year nvarchar(10) NULL)INSERT INTO remp_year VALUES (10,'Active','2015-05-26','2015-12-31','2015-2016');
[Code] ...
Here ID 20 and 50 for terminated records is the prior year records so it should count for the last year and those are active in this year those will count for this year.
I have table A (EmployeeNumber, Grouping, Stages)
and
Table B (Grouping, Stages)
Table A could look like the following where the multiple employees could have multiple types and multiple stages.
EmployeeNumber, Type, Stages
100, 1, Stage1
100, 1, Stage2
100, 2, Stage1
100, 2, Stage2
200, 1, Stage1
200, 2, Stage2
Table B is a list of requirements that each employee must have. So every employee must have a type 1 and 2 and the associated stages listed below.
Type, Stage
1, Stage1
1, Stage2
2, Stage1
2, Stage2
2, Stage3
2, Stage4
So I know that each employee should have 2 Type 1's and 4 Type 2's. I hope that makes sense, I'm trying to change my data because ours is very proprietary.
I need to identify employees who do not have all their stages and list the stages they are missing. The final report should only have employees and the associated missing types and stages.
I do a count by employee to see how many types they have to identify the ones that don't have all the types and stages.
My count would look something like this:
EmployeeNumber Type Total
100, 1, 2
100, 2, 2
200, 1, 1
200 1, 2
So I know that employee 100 should have 2 more Type 2's and employee 200 should have 1 more Type 1 and 2 more Type 2's based on the required list.
The problem I'm having is taking that required list and joining to my list of employees with missing data and pulling from it the types and stages that are missing by employee. I thought I could get a list of the employees that are missing information and right join it to the required list where the missing records would be nulls. But, that doesn't work because some employees do have the required information and so I'm not getting any nulls returned.
What I need to do it select the top 80 percent of records per group based on the group total. To be clear I am not trying to just grab the top x percent of rows.
Table 1:
DealerID RepairID
1 1
1 2
1 3
1 4
1 5
1 6
1 7
1 8
1 9
1 10
2 11
2 12
2 13
Table 2:
RepairID Tire
1 225/65R17 102T
2 225/65R17 102T
3 225/65R17 102T
4 235/60R18 102V
5 235/60R18 102V
6 235/60R18 102V
7 235/60R18 102V
8 205/55R16 89H
9 205/70R15 89H
13 225/65R17 102T
Table 1 has the total number of repair orders per dealer. This can be obtained by simply grouping on DealerID and counting the number of RepairIDs.
Table 2 has information on some of the repair orders and it is needed to select the top 80% of tire sizes. This table will be joined to Table 1 and grouped by DealerID and Tire.
Desired Output:
DealerIDTire RepairsOfThisTireRepairCount PercentOfTotalRepairOrders
1 235/60R18 102V4 10 40
1 225/65R17 102T3 10 30
1 205/55R16 89H1 10 10
2 225/65R17 102T1 3 33
The equation I am given to calculate the top tires per dealer is as follows: Total # of tires for the size / Total # of repair orders per dealer.
Here is what I have so far though I think I might have to rewrite all of it.
SELECT
DealerID ,
COUNT(RepairID)
INTO #TotalDealerRepairOrders
FROM
dbo.Table1
GROUP BY
DealerID
SELECT
[code].....
Basically I'm trying to produce a report that shows qualified employees for each program. Each employee can possess many qualifications. There will be no programID parameter submitted by the user. I just want to produce the report which shows the programs and the qualified employees for each. I thought I had a query that was working but once I added a different ProgramID into the ProgramModules table things went south.
Here are my tables:
tblEmployees (table of employees)
- EmployeeID
- EmployeeName
tblQualifications (table of qualifications)
- Qualification_ID
- QualificationTitle
tblEmployeeQualification (table of all employees qualifications)
-EmpQualificationID
-EmployeeID (fk for tblEmployees)
-QualificationID (fk for tblQualifications)
tblPrograms (table of programs)
-ProgramID
-ProgramTitle
tblProgramModules (table of qualifications required by each program)
-ProgramModuleID
-ProgramID (fk for tblPrograms)
-QualificationID (fk for tblQualifications)
Here is the query I was working with that works when there are only records in the ProgramModules table that use the same ProgramID
SELECT
tblProgramModules.TrainingProgramID,
tblEmployees.EmployeeID,
tblEmployees.EmployeeName
FROM
tblEmployees
[Code] .....
Dear All
I need to cerate a SP that SELECTS all the records from a table WHERE the first letter of each records starts with 'A' or 'B' or 'C' and so on. The letter is passed via a parameter from a aspx web page, I was wondering that someone can help me in the what TSQL to use I am not looking for a solution just a poin in the right direction. Can you help.
Thanks Ross
I am trying to build a select statement that will
1). find records where a duplicate field exists.
2.) show the ItemNo of records where the Historical data is ' '.
I have the query which shows me the duplicates but I'm stuck when trying to only show records where the Historical field = ' '.
Originally I thought I could accomplish this goal with a sub query based off of the original duplicate result set but SQL server returns an error.
Below you will find a temp table to create and try in your environment.
create table #Items
(
ItemNovarchar (50),
SearchNo varchar (50),
Historical int
[Code] ....
Ultimately I need a result set that returns 'ATMR10 MFZ N', and 'QBGFEP2050 CH DIS'.
I have date field in table and data contain 2014-08-09 11:13:03.340
when I use smalldatefield I am getting 2014-08-09 11:13:00 I should have got 2014-08-09 11:13:03
Why the 03 is trimming in smalldatefield.
how do I use select query to get 2014-08-09 11:13:03 from original Date records
I have some data in the following format;
MYTABLE
DOC_NO // REV_NO // FILE_NAME
ABC123 // A // abc123.pdf
ABC123 // B // abc123_2.docx
ABC124 // A // abc124.xlsx
ABC124 // A // -
ABC125 // A // abc125.docx
ABC125 // C // abc125.jpg
ABC125 // C // abc125.docx
ABC125 // C // -
ABC126 // 0 // -
ABC127 // A1 // abc127.xlsx
ABC127 // A1 // abc127.pdf
I'm looking to select all rows where the DOC_NO and REV_NO appear only once.(i.e. the combination of the two values together, not any distinct value in a column)
I have written the sub query to filter the correct results;
SELECT DOC_NO, REV_NO FROM [MYTABLE]
GROUP BY DOC_NO, REV_NO
HAVING COUNT(*) =1
I now need to strip out the records which have no file (represented as "-" in the FILE_NAME field) and select the other fields (same table - for example, lets just say "ADD1", "ADD2" and "ADD3")
I was looking to put together a query like;
SELECT DOC_NO, REV_NO, FILE_NAME, ADD1, ADD2, ADD3 FROM [MYTABLE]
WHERE FILE_NAME NOT LIKE '-' AND DOC_NO IN
(SELECT DOC_NO, REV_NO FROM [MYTABLE]
GROUP BY DOC_NO, REV_NO
HAVING COUNT(*) =1)
But of course, DOC_NO alone being in the subquery select is not sufficient, as (ABC125 /A) is a unique combination, but (ABC125 /C) is not, but these results would be pulled in.
I also cannot simply add an additional "AND" clause on its own to make sure the REV_NO value appears in the subquery, because it is highly repetitive and would have to specifically match the DOC_NO)
What is the easiest way of ensuring that I only pull in the records where both the DOC_NO and REV_NO (combination) are unique, or is there a better way of putting this select together altogether?
Our business get orders through the week with the weekends (Fri & Sat) orders being higher than weekdays. Im wanting to graph this years data with last years and possible the years before but to compare days in such a way that the all the weekdays line up. so comparing 2015 week 1 with 2014 week 1 but with 03/01/2015 (Sat) lining up with 04/01/2014 (Sat) etc.
I'm looking for alternatives to adding or removing days from the dates to solve this issue, i have a date dimension table for the past 5 years that i can use to compare calendar week 201401 with calendar week 201501 but I am finding it a bit inflexable.
I have a set of records that will always be the same. A template if you wanna call it that.
"SELECT ID, Field1, Field2, Field3, Field4, Field5, Field6, Field7 FROM TABLE WHERE Field2 = 000"
This returns a 20 record set. The user will click a button and create another set of 20 records, where they can make changes accordingly.
I'm trying to select records that occur more than once. I'm trying to base this on the email column. So basically I want the query to look something like this:
select * from table where emailaddress count > 1
Can someone provide me with the correct syntax? :)
I am trying to move files to directories based on the file status. If the file contains the Flag='E' then I want to move it to an "Error" folder, otherwise it will go to a "Processed" folder.
Here is my current code:
DECLARE @cmd varchar(500)
SELECT
CASE
WHEN Processed_Flag = 'E'
THEN
SET @cmd='MOVE /Y C: empmyfiles*.dat C: empmyfilesError'
ELSE
SET @cmd='MOVE /Y C: empmyfiles*.dat C: empmyfilesProcessed'
END
FROM#TEMP
PRINT @Cmd
Ok I have a query "SELECT ColumnNames FROM tbl1" let's say the values returned are "age,sex,race".
Now I want to be able to create an "update" statement like "UPATE tbl2 SET Col2 = age + sex + race" dynamically and execute this UPDATE statement. So, if the next select statement returns "age, sex, race, gender" then the script should create "UPDATE tbl2 SET Col2 = age + sex + race + gender" and execute it.
Does there a way or script to find the rows, space used by the specific tables based on every year.
View 9 Replies View RelatedI'm using PHP with SQLServer2k to create a page containing monthly counts of episodes at a facility occurring between two user selected month/year combinations. For instance, the user could select 10/2003 and 2/2004 and facility X and get a line for each month showing the count of episodes occuring in that month.
The problem is that the episode date is stored in three integer fields (epiday, epimonth, epiyear) and I'm having a terrible time getting them into a format where I can use them in a between statement.
I've tried evaluating the parts of the episode date seperately like:
where
(epimonth>=10 and epiyear=2003)
or
(epimonth<=2 and epiyear=2004)
and that works, but what happens when someone wants to see from 10/2002 to 2/2004?
Any suggestions on the best way to do this?
I have a table where hours are being loaded in a weekly basis. The YearWeek is populated when the data is loaded. The value format of the Year Week is 2015-39, 2015-41, etc. I need to calculate the total hours per Fiscal Year.For example, week '2015-39' will be return FY15 and week '2015-41' will return FY16, and so on. By extracting the year, I can do a group by and have total hours for each year.
Currently, I have it working by splitting the value into year and week and then looping through each year and week, so I can assign the totals to the corresponding FY.select sum(hours) as total, yearweek from tablename group by yearweek...Then I loop through using C#.I can return the FY using an actual date,how to do it for year-week format for any given year.
select CASE
WHEN CAST(GETDATE() AS DATE) >
SMALLDATETIMEFROMPARTS(DATEPART(YEAR,GETDATE()),09,30,00,000)
THEN
DATEPART(YEAR,GETDATE()) + 1 ELSE DATEPART(YEAR,GETDATE())
END AS FY
Attached is a file that generates a sample dataset from which I want to forecast a value for column 'Parcel Count 2014' from tomorrow (30/10/2014) till the end of December (31/12/2014). The forecast should be based on values from column 'Parcel Count 2013' for the same Month.
View 9 Replies View RelatedI have a table which can be downloaded from the link below. The table contains property Market Rent and period the new rent is applicable. I need to generate a report with parameter ( year and month) so when the user inputs year and month the associated market rent amount for that month is listed.
For example if the 1st market rent update was done in June 2014 ( $300) and the 2nd in Dec 2014 $(350), the property market rent from June to Nov should be $300 and from Dec 2014 till the next rent update $350. So if user inputs year 2014 and month August, the amount is $300 and if the user enters the year 2015 and month March amount is $350
[URL] ....
Below is the table with sample data
DECLARE @table TABLE ( PropCode INT ,PropStartDate DATE ,PropEndDate char(10) ,PropRentStartDate DATE ,PropRentEndDate DATE ,MarketRent INT)
INSERT INTO @table (PropCode,PropStartDate, PropEndDate,PropRentStartDate,PropRentEndDate, MarketRent) VALUES
(2718, '2013-01-30', 'NULL', '2012-11-29', '2013-07-21', 289.20) ,(2718, '2013-01-30', 'NULL', '2013-07-22', '2013-11-24', 289.20) ,(2718, '2013-01-30', 'NULL', '2013-11-25', '2014-06-14', 289.20) ,(2718, '2013-01-30', 'NULL', '2014-06-15', '2014-11-30', 299.18) ,(2718, '2013-01-30', 'NULL', '2014-12-01', '2015-01-02', 299.18) ,(2718, '2013-01-30', 'NULL', '2015-01-03', '2050-01-01', 310.00) ,(3901, '2014-05-27', 'NULL', '2014-06-09', '2014-11-30', 400.00) ,(3901, '2014-05-27', 'NULL', '2014-12-01', '2050-01-01', 400.00) ,(3960, '2014-10-31', 'NULL', '2014-11-05', '2016-11-05', 470.00)
Select * from @table
I have three tables: EMP (ID, NAME), EMPDATE (ID, STARTDATE, ENDDATE), YEAR(YEAR)
I would like to get the most recent date within a given year per each EMP? For example, EMPID 1 can be enrolled in many programs, each program has start end dates. I need to list the most recent date an employee was enrolled (max date between START AND END DATE which ever is most recent enrollment) for a given year. For example, for 2014 his/her most recent enrollment should be 10/23/2014 for year 2014 and 2013-10-24 for year 2013.
SELECT ID, EMP.NAME, DTE.StartDate, DTE.ENDDATE, year
FROM
EMP_DATE DTE join
EMP_INFO EMP on EMP.ID = DTE.ID join
YEAR YR on YR.YEAR = YEAR(DTE.STARTDATE)
DATA SAMPLE:
EMP
ID NAME
1 JOHN
EMP_INFO
ID STARTDATE ENDDATE
12013-10-24 2014-03-11
12014-06-13 2014-03-11
12014-06-15 2014-03-11
12014-09-08 2014-03-11
12014-09-12 2014-03-11
12014-09-14 2014-03-11
12014-01-13 2014-05-17
12014-05-14 2014-06-09
12014-06-10 2014-06-16
12014-08-31 2014-09-04
12014-09-05 2014-09-06
12014-09-07 2014-10-23
YEAR
Year
2012
2013
2014
2015
My example data as this:
ID code1 code2
1 a m
1 b n
1 c T
2 d m
2 e n
2 f n
3 g m
3 h n
3 i T
I would like to have a select stmt that check for all same ID and code2 does not contain T, then return the records
For example data: the query should return
2 d m
2 e n
2 f n
Is it possible to do this?
Hi every one,
I have a database table and currently users may retrieve records for a specified date range by providing the start and end dates and then records between those dates provided are retrieved. For example if users wanted to view all records entered in april, they would have to select 04/01/2007 as the start date and then 04/30/2007 as the end date. The records for april would then be displayed in a gridview.
How can configure my sql query such that instead the user selectes a month from a dropdownlist of 12 months. I would love a user to just select the desired month from a list instead of selecting start and end dates. Eg if they are intrested in a report for june, then they should just select june from the list instead of specifying the start and stop dates. HOW can i achieve this.
What's the best way to calculate a customers age and value by month and year?
I need to be able to calculate customer value by month and year, and then to calculate their age at each month in time. I've found a way of grouping sales by month and year that includes age for a particular contact like this:
select fh.contact_number
, concat(year(fh.transaction_date), '-', month(fh.transaction_date)) as transaction_month_year
, cast(fh.transaction_date as date) as transaction_date
, sum(fh.amount) as ttl_amount_in_month
[Code] .....
It seems to work, but any better way to achieve this?
I need to create a table which holds date information for our financial year.
I have all the dates between now and 2045 and the start of the week and the end of the week. What I also have is the first sunday of the previous week in the spreadsheet too.
Please see below attachment
What I need to autofill once I import these three dates into a database is the week and the month.
The difficulty surrounding the month is that, we start a new month on the FIRST Sunday of the month.
So dates 07/04/14 to 04/05/2014 would be month 1.
Month 2 would begin on 05/05/2014 as it is the day after the first Sunday of the month, and so on....Month 5 would start on the 04/08/14.
Need to script something that would automatically calculate the week and month for me on the basis on above, if I have the start date, end date and 1st sunday already in a table?
This is what I have for a query but i would like to take the year off. is there a way i can just have the month and day without the year attached?
View 3 Replies View RelatedIs there a way to show multiple metrics in 1 SQL pivot operator. Basically, I have the Table1 and want the desired results is the Table2 format.
Table1
ACCOUNTS YEARREVENUEMARGIN
ACCOUNT1 2012100 50
ACCOUNT1 2013104 52
ACCOUNT1 2014108 54
[code]....
I have a table with Month , Year as varchar. I realized it was a big mistake. Since its getting too complicated to query this way.
Year Month Productname
2013 11 ACB
2013 11 CDE
I would now like to add another column called date and store these Year Month as a date to my existing table
Year Month ProductName Date
2013 11 ACB 2013-11-01
2013 11 CDE 2013-11-01
Is there a way I can do it for all the columns of the existing table ??
I need to build a report that compares a count on a certain day of the week by month by year by stacks. That is,for first Monday in October 2012 against first Monday in October 2013 for stack DM1 against first Monday in October 2014 stack DM1, same for second Monday, first Tuesday, second Tuesday, ect. Attached is a sample dataset and what I want to achieve.
View 9 Replies View Related