SQL Server 2012 :: Select A Part Of Text From The XML?
Feb 18, 2014
I have an xml stored in a coulum of a table and I use the following query to extract an xml element :
select CONVERT(XML,CONVERT(NVARCHAR(max),Response)).value('(/Quote/error)[1]','nvarchar(max)') as Excepiton .The result of the expression is :
TL43:The product has no marked price.;I would like to select only the code : TL43and then separately I would like to select The product has no marked price.Is there a way I can do it?
View 1 Replies
ADVERTISEMENT
Jun 3, 2015
I have an Address column that I need to Substring. I want to remove part of the string after either, or both of the following characters i.e ',' OR '*'
Example Record 1. Elland **REQUIRES BOOKING IN***
Example Record 2. Theale, Nr Reading, Berkshire
Example Record 3. Stockport
How do I achieve this in a CASE Statement?
The following two case statements return the correct results, but I some how need to combine them into a single Statement?
,LEFT(Address ,CASE WHEN CHARINDEX(',',Address) =0
THEN LEN(Address )
ELSE CHARINDEX(',' ,Address ) -1 END) AS 'Town Test'
,LEFT(Address ,CASE WHEN CHARINDEX('*',Address ) =0
THEN LEN(Address)
ELSE CHARINDEX('*' ,Address ) -1 END) AS 'Town Test2'
View 8 Replies
View Related
Jun 6, 2015
how to import a text file with a list of NI numbers into a new table with a column to list all the NI numbers? I think I use the Select INTO clause, but not sure how to do this?
View 1 Replies
View Related
Jan 28, 2015
I have made the following Scalar-valued function:
CREATE FUNCTION [dbo].[TimeCalc]
(
@OriginalTime AS INTEGER
, @TenthsOrHundredths AS INTEGER -- code 2: 1/10, code 4: 1/100
)
RETURNS NVARCHAR(8)
[Code] ....
What it does is convert numbers to times
E.g.: 81230 gets divided by 10 (times in seconds: 8123). This 1 1 full minute, and the remainder = 2123 making it 1.21.23 mins)
So far so good (function works perfectly)
My question: sometimes times are in 1/100 (like above sample), sometimes in 1/10.
This means that, e.g. with a time like 3.23.40 the last zero must be deleted.
My thoughts are to use the results from the Return Case part, and as the code = 4: leave it as it is,
is the code 2 the use LEFT(... result Return Case ..., Len(..result Return Case.. - 1))
There are 5 codes: 0 1 2 3 and 4
View 9 Replies
View Related
Jan 8, 2015
I am trying to make a query that will group my errors messages together - my problem is that each of the error messages is unique, due to them having an unique id in them.
"GROUP BY LIKE '%ThePartToGroupBy%'"
View 9 Replies
View Related
Oct 7, 2015
I'm trying to replace a particular part of a row in a table with a new value.
The row is called "DataPath" and it has a lot of values like so:
mashOperationsComponent Data FilesSantec
I want to run a query to replace the mash with our DFS namespace share name companysharesDepartments but keep everything else past the mash part of the original row.
I'm currently running this query, it says it is altering 30,000 rows, but it doesn't look like it's doing anything at all..
UPDATE dbo.Part
SET DataPath = REPLACE(DataPath,'company.localsharesDepartments','mash')
WHERE DataPath like 'mash\%'
So for example, it would change the mash above to
company.localsharesDepartmentsOperationsComponent Data FilesSantec
View 2 Replies
View Related
May 9, 2014
One purchased app stored user's multiple lines input into a varchar column in which including char(13) and char(10).
My app need to select this value and format to multiple lines text in one text box.
How to code to output it?
View 5 Replies
View Related
Feb 27, 2015
I am doing a web app on the full text search.My select statement using CONTAINS but it doesn't seem to return all the string that contains the search word I included in the query.For example:
Select CustomerID, customername,
from CustomerTable
where CONTAINS ((CustomerID), '"430*")
the query result only return all customer id which has space in front 430 or start with 430
ex: "xxx 430xxx" or "430 xxx" or "xxx 430 xxx"
but did not return customerID which doesn't has space in front of it
Ex: x430xxx
If I use LIKE '%430%', the result return are both have space in front and don't have space in front.
View 1 Replies
View Related
Aug 25, 2015
There are 3 columns in the result set - part num, Qty and MO num. Each MO num has part numbers.So there might be same part numbers in MO's. Each part num has qty. So, if I group by part num, I get Qty.
1.There are duplicates of part.num and I want to remove duplicates and add quantities of those duplicates into one single quantity. For example, xxxx is a part num, then xxxx=1,xxxx=3,xxxx=5. I want xxxx=9. I want to sum those. Another question is, each MO has a user. I want to join user and MO num in MO.
Heres the code,
part.num , (woitem.qtytarget/wo.qtytarget) AS woitemqty,
(SELECT LIST(wo.num, ',') FROM wo INNER JOIN moitem ON wo.moitemid = moitem.id WHERE moitem.moid = mo.id) AS wonums FROM mo INNER JOIN moitem ON mo.id = moitem.moid
LEFT JOIN wo ON moitem.id = wo.moitemid
LEFT JOIN woitem ON wo.id = woitem.woid AND woitem.typeid = 10 LEFT JOIN (Select sum(woitem.qtytarget) as labor, woitem.woid, uom.code as uom from woitem JOIN part on woitem.partid = part.id and part.typeid = 21 JOIN uom on woitem.uomid = uom.id group by 2,3) as labor on wo.id = labor.woid LEFT JOIN part ON woitem.partid = part.id
View 1 Replies
View Related
Nov 6, 2006
Hello,
i am facing a bizarre problem, accessing data from a remote server which has been linked to my sql.
My SQL server is 2005 and the remote server is SQL 2000.
i have linked the remote server (called LinkedServer) so that when i run this query:
SELECT * FROM LinkedServer.SomeDB.dbo.SomeTable
executes successfully! However, when i run a similar query like this:
SELECT Column1 AS Col1,
LinkedServer.SomeDB.dbo.SomeTable.Column2 as Col2,
Alias.Column3 as Col3
FROM LinkedServer.SomeDB.dbo.SomeTable
INNER JOIN LinkedServer.SomeDB.dbo.SomeOtherTable1 ON LinkedServer.SomeDB.dbo.SomeTable.Column3 = LinkedServer.SomeDB.dbo.SomeOtherTable1.Column3
INNER JOIN LinkedServer.SomeDB.dbo.SomeOtherTable2 AS Alias
ON LinkedServer.SomeDB.dbo.SomeTable.Column3 = Alias.Column3
It gives me this error:
The multi-part identifier "LinkedServer.SomeDB.dbo.SomeTable.Column2" could not be bound.
The multi-part identifier "LinkedServer.SomeDB.dbo.SomeTable.Column3" could not be bound.
I have noticed that this error is generated only for the selected columns whose path has either been repeated (e.g. "LinkedServer.SomeDB.dbo.SomeTable.Column2" as opposed to "Column2") or for columns which are from aliased tables.
What is going on?!?!?!??!?!?!
Any Help would be tremendously appreciated!!!! 8..)
View 8 Replies
View Related
Dec 7, 2007
The value expression for one of the column in my report is
="Notes: " + Fields!Notes.Value. I want to make this Notes caption to bold. I can't move "Notes: ", Fields!Notes.Value to the 2 different columns. So I want to know, Is there a way to do it?
View 4 Replies
View Related
Mar 10, 2006
hey all,
does anyone know of a way to format part of a text box in sql reporting services 2005? i am creating a form letter and need to concatenate static text with a column and need just the column value to be bold. like this:
"This letter is confirmation that Acme Agency has been chosen..."
my expression to build this is:
="This letter is confirmation that " + Fields!agency_name.Value + " has been chosen..."
Is there a way to apply formatting just to Fields!agency_name.Value ?
thanks!
jen
View 5 Replies
View Related
Aug 17, 2006
Hello all,
I have a table that holds a large amount of text in a field that is the body of the email. For example, it might say something like:
Quote: Email tech support at thisemail@email.com if you have any questions about the results of this test.
I need to change the email address in this field. Using this example I need to change thisemail@email.com to thatemail@email.com; however I do not want to change the other text in that field.
It is also important to note that the rest of the body of the emails stored here is different depending on the email.
So basically what I need is a statement that would look at a particular field, search for an email address, and replace that email address with another one without disturbing the rest of the text in that field. I already checked the w3 update tutorial and the update there is for the entire field.
Thanks for the help in advance!
View 7 Replies
View Related
Apr 20, 2015
I have a string column in a DB where it's values contain the following midway through the string ([DOCUMENTGUID] is a uniqueidentifier that is different for each row):
<a href="../downloadDoc.aspx?dg=[DOCUMENTGUID]" target="_blank">
I would like to replace this part of the string with a different piece of text.
I know that I should be using PATINDEX and REPLACE functions but I don't know how to utilise.
View 4 Replies
View Related
Apr 18, 2014
I The requirement is to unload all columns data into csv file using bcp with pipe delimiter, but the condition is to remove milliseconds part of a datetime column.
Ex:
2014-02-19 17:12:14.967 remove .967 from data while unloading into csv.
View 1 Replies
View Related
Apr 11, 2008
Ok I have the following SQL, I have a subquery in the SELECT part but also the same subquery in the WHERE part as well.What I'm trying to do is get all parents that have children OR get all parents with no children OR just get all parents regardless (@HasResponses is a BIT that can be 1, 0 or null). At the same time I want to count the total number of children in the select list, but I'm having to copy the same subquery in the SELECT and WHERE parts which doesn't seem terribly optimal to me (maybe it is, that's why I'm asking). I've tried referencing the column alias in the select list (AS [Responses]) for the where part (@HasResponses = 0 AND [Responses] = 0), but it doesn't seem to work.Is this the most optimal way to do it? Is there a better way? I'm working with SQL Server 2005.SELECTf.FeedbackText AS [Feedback Comment],u.Name AS [Feedback Author],f.CreatedDate AS [Created On],(SELECT COUNT(*)FROM FeedbackResponse frWHERE fr.FeedbackID = f.ID) AS [Responses]FROM Feedback fINNER JOIN [User] u ON f.StaffID = u.StaffIDWHERE f.CreatedDate >= @DateFromAND f.CreatedDate <= @DateToAND(@HasResponses IS NULLOR(@HasResponses = 1 AND(SELECT COUNT(*)FROM FeedbackResponse frWHERE fr.FeedbackID = f.ID) > 0)OR(@HasResponses = 0 AND(SELECT COUNT(*)FROM FeedbackResponse frWHERE fr.FeedbackID = f.ID) = 0))
View 2 Replies
View Related
Dec 5, 2013
How do I only display a part of data from the column ?
Lets say emp_id is E3456 and all i want to display is 3456 without that E?
View 2 Replies
View Related
Dec 23, 2013
I'm trying to form a query that will select part of a result.I'm trying to take out the ending of results that end in '-PR'.
Example: The original result is 'Jbbx32-PR'. I want to select it as 'Jbbx32'.
View 5 Replies
View Related
Feb 20, 2014
I have a PURCHASE ORDER NUMBER which is character 24 pos. and I only want to select in the query those which start with
'101' from 1 to 3 = '101'
How to do this in the query?
View 5 Replies
View Related
Feb 9, 2015
SQL 2012 Ent SP2
Database is in simple recovery mode, and published with transaction replication push subscription, just one subscriber but the database is huge. I don't want to overwrite the schema at the subscriber either.
I had to run an alter database command on a published database, it created so many logs that an extra drive had to be added along with an extra log file to accommodate all the logs.
The problem I have is I'd like to know clear the file of logs so I can drop the temporary log file, and give the drive back, but I cannot.
I have tried dbcc shrinkfile with the emptyfile option but it never clears, I have also tried it with notruncate and truncateonly options (mainly out of desperation).
I do not need to worry about point in time restore as a full backup is taken before and after the operation. After which the database will be put back into Full recovery mode.
I have looked at log_reuse_wait_desc and the file says 'Replication', so I am now thinking the file cannot empty because replication is keeping one of the VLFs active. I tried dropping and recreating the subscription hoping it might free something up and I could get somewhere, but it made no difference.
Do I have to remove replication completely to get round this? Surely not.
I have also tried putting the database back into full recovery mode, doing a full DB backup, and a transaction log backup, but its made no difference, which is also what makes me think a portion of the log is still active because of replication, and perhaps the transactions have not gone through to the subscriber, which raises another question, why not?
I have not tried restarting SQL server, as I'd like to know a way out of this without having to do that, plus I do not think it would make any difference anyway.
View 1 Replies
View Related
Jul 15, 2014
Today I have a very similar situation, only today I am dealing with missing text data, not numeric data.
DECLARE @MissingTextData TABLE
(
RowID int
,UserID int
, EmailAddress varchar(20)
,StreetAddress varchar(20)
[code]...
I would like to fill in the NULL columns with data from the other row, and then select the one row that is filled with all data. I was able to use MAX() for a numeric value, but I am really stumped on the text data. Everything that I have tried is not working.
View 1 Replies
View Related
Oct 20, 2014
I have a field which contains something like prj(5616) .
I have been assigned to display the actual name and not the text with the number.
Example: if prj(8616) is called Soccer , then I want display Soccer instead of prj(8616).
View 9 Replies
View Related
Sep 3, 2015
I am using FOR XML to generate the HTML and following is my query. I am using td { white-space:nowrap;} for the columns to used no wrap. But i want two columns which need to be wrapped. i have tried lots of options.
SET @tableHTML =
N'<H3><font size="4"> Board - Items </font></H3>' +
N'<table border="1" ><font size="1"> <head><style TYPE="text/css"> td { white-space:nowrap;} </style> ' +
N'<tr bgcolor=#4b6c9e><font size="2" color=white><th> ID</th>
<th> A</th>
<th> B </th>
[Code] ...
From the above code i want G and H columns to be wrapped.
View 3 Replies
View Related
Jun 16, 2004
I know this is an easy one and I know I've read it somewhere, but I can't seem to write the correct format to run correctly. I am trying to build a SELECT statement base on the selected values of a dropdown list on a webform. The selected values will be part of the Table name.. ("client_info" & location_option.selecteditem.value) Can someone show me the correct syntax for adding a form variable into a SELECT statement? Thanks
View 1 Replies
View Related
Mar 9, 2008
hey all,
I have the following query:
ALTER PROCEDURE [dbo].[sp_SelectMostRecentArticle]
AS
BEGIN
DECLARE @article_id INT
SELECT @article_id = (
SELECT TOP 1 article_id
FROM article
ORDER BY article_id DESC
)
DECLARE @comment_count INT
SELECT @comment_count = (
SELECT COUNT(comment_id)
FROM comment
JOIN article ON article_id = comment_article_id
GROUP BY article_id
HAVING article_id = @article_id
)
SELECT TOP 1 article_id, article_author_id,
article_title, article_body, article_post_date,
article_edit_date, article_status, article_author_id
article_author_ip, author_display_name,
category_id, category_name--, comment_count AS @comment_count
FROM article
JOIN author ON author_id = article_author_id
JOIN category ON category_id = article_category_id
GROUP BY article_id, article_title, article_body, article_post_date,
article_edit_date, article_status, article_author_ip,article_author_id,
author_display_name, category_id, category_name
HAVING article_id = @article_id
END
GO
as you can see, im trying to return a comment_count value, but the only way I can do this is by defining the variable.
I have had to do it this way, because I cannot say COUNT(comment.comment_id) AS comment_count or it returns an error that it cant reference the comment.comment_id.
But when change it to FROM article, comment; I get errors about the article_author_id and article_comment_id.
And i cant add a join, because it would return the amount of rows of the comment...
unless someone could help with what i Just decribed (as i would prefer to do it this way), how would i return the variable value as part of the select statement?
Cheers
View 6 Replies
View Related
Sep 12, 2014
There is column mobile_number in my table
I have to replace with star(*) to the middle six character from contact number of 10 digit.
For example
The Contact number is 9334459875
I have to display it as follows
93******75 first two digit and last two only.
View 1 Replies
View Related
Mar 12, 2015
In SQL 2005 if i was trying to insert some data with a text qualifier inside a text qualified field, it would work, for example:
"Name","ID ","Location","","Comany",""House Name" Road",
In SQL 2012, this fails with the error message, cannot find the text qualifer for field.
To get around this, we are having to import the data into a Dirty Data column of aTEMP table, ID, Dirty Data, Clean data - perform multiple updates and change the text qualifier and ensure they are only changed in the right places so we can keep the ". In this example, we changed the text qualifier to PIPES.
After these updates, we then export the data from CLEAN data back out to CSV, then reimport it into the origional destination table with a new text qualifer.
View 5 Replies
View Related
Jan 29, 2014
Full Text Searches are working on my test server, but not on my production server. My test scenario is as follows:
CREATE FULLTEXT CATALOG FTC_Test
AS DEFAULT
AUTHORIZATION dbo
CREATE FULLTEXT INDEX ON guest.FtsTest(FullName)
KEY INDEX PK_FtsTest ON FTC_TestI wait briefly and then check to see if the index has been populated:
SELECT * FROM sys.fulltext_indexescrawl_end_date is not null,
So I'm assuming I don't have to wait anymore before I try some FTS searches. Right? I can't get any queries to return anything, though.
The following tells me the full text item count for the table is zero:
DECLARE @TableId INT
SELECT @TableId = id FROM sys.sysobjects WHERE [Name] = 'FtsTest'
SELECT OBJECTPROPERTYEX(@TableId, 'TableFulltextItemCount') AS TableFulltextItemCount
As mentioned, the full text search works on my test server. Both of them are SQL 20012 SP1 (11.0.3000) x64 running on WinServer 2008 R2 SP1.
View 3 Replies
View Related
Apr 11, 2014
I am new to Full-Text Searches and FileTables. I am working on a resume search system. I created a FileTable and the Share which contains about 51,000 resumes in Word (DOC/DOCX), PDF and TXT formats that were copied over from our main file server. I followed the instructions on adding the Microsoft Filter Pack 2.0, and all searchable file types are listed in sys.fulltext.document_types.
I have a program that searches resumes by First and Last Name and/or E-mail Address. For a while, we thought it was working fine because we were getting hits, but then we noticed some Names and E-mail Addresses we new existed were not showing up in my CONTAINS queries -- but we verified the documents do exist and the Names exist in the File Name and inside the document along with the E-Mail address.
One example I'm working on now cannot find the First/Last Name with CONTAINS(name,"lastname") in a Word DOC file, but I can find the document using LEFT(name,5) = 'Smith'. It's a Word DOC file. For testing purposes, I opened the DOC file in Word, then used Save As to create a TXT and DOCX file within the same folder. Now, both of those are showing up in the CONTAINS but not the original DOC file.
View 0 Replies
View Related
Aug 11, 2014
I'm standardizing street addresses and i think full text search, maybe, work fine with my problem. My problem is that I have 2 millon of errors and using "LIKE" dont work correctly. This is what i have now:
UPDATE addresses
SET standarAddress = REPLACE (addresses.streetAddress, errors.streetAddress, corrects.streetAddress)
FROM corrects
INNER JOIN errors
ON corrects.id = errors.idCorrects
[Code] ....
View 0 Replies
View Related
May 1, 2015
I have a column A as 'text' datatype. This has CR-LF in between data.How to remove it.
I am trying to copy result from SQL to Excel
Eg:
A CR LF
ABC CR LF
DVB CR LF
The output should be:
A
ABC DVB
View 2 Replies
View Related
Jul 21, 2015
I have made this defination for a stored procedure:
PROCEDURE EP_Conterbalances
@Start_Date_For_Totals_Date DATETIME,
@EmpFilterAddDuty VARCHAR(500),
@CounterBalanceType_id INT,
@dateFrom DATETIME,
[Code] .....
The value of @EmpFilterAddDuty could be:
'SELECT E.EmployeeID FROM dbo.EmployeeGroupMapToEmployee E, dbo.Per_Budget B WHERE E.EmployeeID = B.PER_PERSONAL_ID AND B.PEB_Budget_id = 243 AND E.EmployeeGroupID IN (SELECT H.Id FROM dbo.EmployeeGroup H WHERE H.InstitutionsId = 22) GROUP BY E.EmployeeID '
If i Replace @EmpFilterAddDuty with this in a QUERY, it gives me the expected result, but if i try to execute the stored procedure.:
DECLARE@return_value int
EXEC@return_value = [dbo].[EP_Conterbalances]
@Start_Date_For_Totals_Date = N'20120831',
@EmpFilterAddDuty = 'SELECT E.EmployeeID FROM dbo.EmployeeGroupMapToEmployee E, dbo.Per_Budget B
[Code] .....
I get this error code:
Conversion failed when converting the varchar value 'SELECT E.EmployeeID FROM dbo.EmployeeGroupMapToEmployee E, dbo.Per_Budget B WHERE E.EmployeeID = B.PER_PERSONAL_ID AND B.PEB_Budget_id = 243 AND E.EmployeeGroupID IN (SELECT H.Id FROM dbo.EmployeeGroup H WHERE H.InstitutionsId = 22) GROUP BY E.EmployeeID ' to data type int.
I really do not understand why SQL 2012 tries to convert the value to an int, and I want to know how to pass the text string.
View 4 Replies
View Related
Jul 31, 2014
I need to write a select statement that take the upper table and select the lower table.
View 3 Replies
View Related
