SQL Server 2012 :: Solve Null Value Is Eliminated By Aggregate Or Other SET Operation?
Nov 26, 2013
I execute the code below
declare @LastDate datetime
SELECT @LastDate = max([LastUpdate])
FROM [exhibitor].[dbo].[blgBelongs]
WHERE (([Table1]=@module1 OR [Table2]=@module2 )or ([Table2]=@module1 OR [Table1]=@module2 )
AND Exists (SELECT [Table1],[Table1ID] FROM [exhibitor].[dbo].[blgBelongs] WHERE table2=30 and table2ID=@dmn_ID))
Before I see @LastDate , I see this warning
Warning: Null value is eliminated by an aggregate or other SET operation.
In a t-sql 2012 query that will be updated in a stored procedure I am getting the following warning message:
Warning: Null value is eliminated by an aggregate or other SET operation. I would like to get rid of this warning missing without just turning off the warning messages.
I would like to change the sql so that it does not occur. The following is my new sql that generates the warning:
case when (coalesce(a.status,ae.status) = 'A') and (IsNull(ae.excuse, 'U') = 'U') and (IsNull(ae.code, 'DRC') = 'DRC') then
sum(DATEDIFF(minute,pm.startTime,pm.endTime)-coalesce(pm.lunchTime,0)-coalesce(a.presentMinutes,0)) else 0 end as DRCMinutes,
After running a script in QA, I got several result sets and one of them is "Warning: Null value eliminated from aggregate.". How can I get rid of this output so it's not shown at all. I use the output as a recordset on the ASP page.
I am getting this warning when I execute my query:
* Warning: Null value is eliminated by an aggregate or other SET operation. *
It is still populating the results fine, but I dont know how to get rid of it. I know one of my solutions is:
SET ANSI_WARNINGS OFF
-- sql code
SET ANSI_WARNINGS ON
Apparently it has to do with the MAX function in the following line:
SELECT @BusinessDay = (SELECT MAX(PeriodDate) FROM TableName)
I checked in the table and PeriodDate column has about 4000 of 10,000 rows blank. so Im assuming that is what is causing the error. what should I do? something like:
SELECT @BusinessDay = ISNULL((SELECT MAX(PeriodDate) , @TodaysDate) From TableName
I'm using SQL Server 2012 Analysis services in Tabular mode and connected to Oracle Database and while importing, I'm getting below error after importing some rows.
OLE DB or ODBC error: Accessor is not a parameter accessor.. The current operation was cancelled because another operation in the transaction failed.
I recently upsized my acess 2000 db to SQL 2000, but I am now having errors . . .
Error Type: Microsoft OLE DB Provider for ODBC Drivers (0x80040E07) [Microsoft][ODBC SQL Server Driver][SQL Server]The sum or average aggregate operation cannot take a nvarchar data type as an argument. /data_count.asp, line 4
The code within the asp file: <% dataSQL = "SELECT SUM(filesize) FROM DL where show=1" Set datacount = my_Conn.Execute(dataSQL) anBytes = datacount(0) %>
how to solve this problem .... I want to select te sum of nvarchar column and this error always happen
what is the solution this is my query
"SELECT Datein AS Date,SUM(Durm) AS DurationMin, COUNT (*) AS 'Number of Hits' FROM Rayyan_Log WHERE (DNIS = '"+DropDownList1.SelectedItem.Text +"') AND (Datein between '"+TextBox2.Text+"' and '"+TextBox3.Text+"') GROUP BY Datein ORDER BY Datein"
I am trying to tie together tables that show quantities of a product committed to an order and quantities on hand by a location.
My end result should look like the below example.
Item Location QtyOnHandByLocation SumQtyCommitTotal Prod1 NJ 10 10 Prod1 NY 10 0 Prod1 FL 0 0 Prod1 PA 0 0
So I can see I have 10 items in NJ On Hand and Committed to an order. 10 available in NY but not on an order. Then the other two locations have no quantities.
Below is the CTE but it produces inaccurate results. I've tried running it several different ways by playing with the grouping but have no luck thus far.
--create the temp table Create table #SalesLine ( Novarchar (50) not null , LocationCodevarchar (50) not null , QtyCommitint not null ) create table #ItemLedgerEntry
[code]....
I am close to the desired results but can't find a way.
I'm trying to write a query that returns last 30 days data and sums the amount by day. However I need to do it for every year not just the current one(I need to go back as far as 2000).
declare @t table (id int identity(1,1), dt datetime, amt MONEY) insert into @t (dt, amt) select '2014-11-30 23:39:35.717' as dt, 66 as amt UNION ALL select '2014-11-30 23:29:16.747' as dt, 5 as amt UNION ALL select '2014-11-22 23:25:33.780' as dt, 62 as amt UNION ALL
[Code] ....
--expected output select '2014-11-30' AS dt, 71 AS Amt UNION ALL select '2014-11-22' AS dt, 62 AS Amt UNION ALL select '2014-11-20' AS dt, 66 AS Amt UNION ALL select '2014-11-18' AS dt, 102 AS Amt UNION ALL
I am trying to create an aggregate table where the value is a rolling sum. Type a on date 1 is the sum of the values in the main tbl. Type a on date 2 is the sum of values for type a on date 1 and date 2. Is this possible? I have been trying update t sql with sum(case where date <= date) statements but can't get it to run.
create table main_table (type nvarchar(10), date int, datavalues int); insert into main_table values('a', '1',3); insert into main_table values('b', '1',4)
I'm trying to write a query to select various columns from 3 tables. In the where clause I use a set of conditions, but most important condition is that I only want to see all results from the different columns where the ph.ProdHeaderDossierCode contains at least 25 lines of processed hours. I tried this with group by and having, but I constant get error messages on all other columns that I want to see: "is invalid in the select list because it is not contained in either an aggregate function or the GROUP BY clause". How can I make this so I can see all information I need?
I have a specific variation on the standard 'Column Invalid' question: I have this query that works fine:
SELECT vd.Question , csq.Q# , csq.Q_Sort , csq.Q_SubSort , AVG(CAST(vd.Response AS FLOAT)) AS AvgC , vd.RType
[Code] ....
When I add this second average column like this:
SELECT vd.Question , csq.Q# , csq.Q_Sort , csq.Q_SubSort , AVG(CAST(vd.Response AS FLOAT)) AS AvgC ,
[Code] ....
I get the error: Column 'dbo.vwData.Response' is invalid in the select list because it is not contained in either an aggregate function or the GROUP BY clause.
Clearly things are in the right place before the change, so I can only assume that the OVER clause is my problem. Is this just not possible?
SET @DateTransaction = (SELECT Max(DateTransaction) FROM tblImport) SET @TradeDate = (SELECT Max(DateTrade) FROM tblSystem) PRINT 'The Transaction Date is ' + CAST(@DateTransaction as varchar) + '. The Trade Date is ' + CAST(@TradeDate as varchar)
However, it is part of a long stored procedure, and when it runs there, I get the following instead of the line confirming the two dates:
Warning: Null value is eliminated by an aggregate or other SET operation.
What could be interfering with this section of the stored procedure?
They are sent to the sproc as null. Since they could be null I need to exclude them from posting to a temp table
Example
DECLARE @QuantityID uniqueidentifier, @LengthID uniqueidentifier, @CostID uniqueidentifier SET @CostID = NEWID() SELECT @QuantityID as ID UNION ALL SELECT @LengthID UNION ALL SELECT @CostID
Two values are null. I want those excluded from this table
Here is the example of what I am trying to do:
DECLARE @QuantityID uniqueidentifier, @LengthID uniqueidentifier, @CostID uniqueidentifier DECLARE @Temp as Table (id uniqueidentifier NOT NULL Primary key) SET @CostID = NEWID() INSERT INTO @Temp SELECT @QuantityID as ID UNION ALL SELECT @LengthID UNION ALL SELECT @CostID
I have two tables, a dates table and a values table. They are joined on the date column.The date table has a range, say from today as far as 20 days from now, incrementing by 1 day each row.The values table may have a row for a day, and may not. If the day has a value I want to display that value.If the day does not have a value in the values table I want to display the last known value.
I think this can be done with windowing functions in a set based manner but have not been able to work it out. I have done it procedurally but im not happy with that at all, and really want to see if this is possible in a set based manner.Below is some simplified code to allow testing with sample data.
create table DimDate ( DateCol date ) create table TotalsData ( DateCol date
Will both statements above access only a single page (as it fits into one page) or does the VARCHAR(MAX) always put its data on a separate page. If so, is the null insert treated differently from the '' insert?
The following t-sql 2012 works fine in sql management studio. However when I place it in a .net 2010 web form application, I am told the sql does not work when the parameter values are null. Thus can you tell me what I can change in the sql below that will accept null as 3 possible input values?
CREATE TABLE A (ID INT IDENTITY (1,1)) CREATE TABLE B (ID INT, EMPID VARCHAR(10)) INSERT INTO A DEFAULT VALUES GO 5 INSERT INTO B VALUES (1,'E23') INSERT INTO B VALUES (1,'E24') INSERT INTO B VALUES (2,'E23')
from the above code i would like to get output like
Question in review today is Creating a Report showing the FName, LName of all Employees not Specified in a region; I would assume "No Value to be Null" Correct?
Or is there another way for me to do this?
This is what I have so far...What am I missing that this is not showing me results?
Select Firstname, Lastname, Region From Employees WHERE Region LIKE 'null%';
The column prod_Master.M2_Pct is defined as float.Yet for some of the rows, the value in [% of Total Target] comes up as null even though there is a number in prod.Measure column. There is valid non-null data in prod_Master.M2_Pct.
I tried LTRIM(RTRIM(prod.Measure)), but no change.
Use ProdDB SELECT TOP (100) PERCENT dbo.prod.ProdNo AS [Prod No], dbo.prod.ProdName AS [Prod Name], CASE WHEN dbo.prod.Measure = 'P1' THEN dbo.prod_Master.P1_Pct WHEN dbo.prod.Measure = 'P2' THEN dbo.prod_Master.P2_Pct WHEN dbo.prod.Measure = 'P3' THEN dbo.prod_Master.P3_Pct WHEN dbo.prod.Measure = 'P4' THEN dbo.prod_Master.P4_Pct
I have a dataset where i want to select the records that matches my input values. But i only want to try macthing a field in my dataset aginst the input value, if the dataset value is not NULL.
I always submit all 4 input values.
@Tyreid, @CarId,@RegionId,@CarAgeGroup
So for the first record in the dataset i get a succesfull output if my input values matches RegionId and CarAgeGroup.
I cant figure out how to create the SQl script for this SELECT?
I am looking for the best way to check to see if any columns are still NULL in a record. I have a form that gets filled out by users and the values entered into TableA. There are 6 columns in the table, 5 are responses and column6 indicates if the record is complete. So I want a way to see if all of the first 5 columns are NOT NULL and, if so, mark column6 with a 1.
I am thinking this would be a good thing for a trigger on INSERT or UPDATE to check to see if the first 5 columns are filled in and then mark the record as complete.
I wrote a select statement, I only want to see orders with max lastUpdatedOn date of 14 days and older. Now my results show dates with all orders of 14 days and older (which is OK), but all others are displayed in the "Uitgifte" column as "NULL". But those orders should not be displayed at all.
selectdistinct ProductionHeader.ProdHeaderOrdNr, ProductionHeader.PartCode, ProductionHeader.Description, ProductionHeader.Qty, (select max (ProdStatusLog.ProdStatusCode)
I am trying to exclude records that have an assessed value that has been waived in an aggregation. For Example:
Here is my table:
CREATE TABLE #temptable (ReportingMonth Varchar(6), Fee_Code Varchar(20), Fee_Transaction_Amount Decimal(12,2), Fee_Transaction_Date Datetime, Fee_Transaction_Type Char) INSERT INTO #temptable (ReportingMonth, Fee_Code, Fee_Transaction_Amount, Fee_Transaction_Date, Fee_Transaction_Type) SELECT 'Jan-13', 'ONE TIME DRAFT FEE', '20', '01/24/2013', 'A' UNION ALL SELECT 'Feb-13', 'LATE CHARGE', '33.6', '02/19/2013', 'A' UNION ALL SELECT 'Mar-13', 'LATE CHARGE', '37.01', '03/18/2013', 'A'
[code]....
Here are Data Mapping Description
Reporting Month = Month - Year Fee Code = Fee Description Name Fee Transaction Amount = Fee Amount Fee Transaction Date = When Fee Amount was Applied Fee Transaction Type = "A" = Assessed Fee; "W" = Waived Fee; "P" = Paid Fee
I've also included an image with beginning data set and what I want to identify in red and what my final data set should look like after the exclusion of those 4 records are removed.
Here are the logic requirements:In the attachment what I need the logic to do is essentially identify the $20 One Time Draft Fee from the first instance using the MIN Transaction date. Since there were $80 waived for this fee code (One Time Draft Fee), I would expect to see the first 4 (highlighted in red) to be identified as the target and as you can see in the attachment the second data set had the 4 highlighted items removed. That should be my final output.
trying to loop and remove the waive amounts from the assess amounts and tied it back to remove from my base data.
