I have this SP
ALTER PROCEDURE GetDelayIntervalData(@start datetime, @stop datetime, @step int)
AS
DECLARE @steps bigint
SET @steps = DATEDIFF(hour, @start, @stop)/ @step
DECLARE @i bigint
SET @i=0
[Code] ....
I have Table Staffsubjects
with columns and Values
Guid AcademyId StaffId ClassId SegmentId SubjectId Status
1 500 101 007 101 555 1
2 500 101 007 101 201 0
3 500 22 008 105 555 1
I need to do 3 scenarios in this table.
1.First i need to update the row if the status column is 0 to 1
2.Need to insert the row IF SegmentId=@SegmentId and SubjectId<>@SubjectId and StaffId=@StaffId
3.Need to insert the row IF StaffId<>@StaffId And ClassId=@ClassId and SegmentId<>@SegmentId and SubjectId<>@SubjectId
I have wrote the stored procedure to do this. But the problem is If do the update. It is reflecting in the database by changing 0 to 1. But it shows error like cannot insert the duplicate
Here is the stored Procedure what i have wrote
ALTER PROCEDURE [dbo].[InsertAssignTeacherToSubjects]
@AcademyId uniqueidentifier,
@StaffId uniqueidentifier,
@ClassId uniqueidentifier,
@SegmentId uniqueidentifier,
@SubjectId uniqueidentifier
[Code] ....
I am have stored procedure that accepts one parameter and returns a single value
The sp works fine.
My question is how do I set the c# webpage to return the single value.
I need a specific example of how to code.
this is how the code should work.
A blank form is loaded, when the user clicks submit I need the code to pull the Login name from the text box and check to see if it exist. I have the sp working the way I need it to. But I can figure how to pull the single value into a variable in the code behind.
I am using dataset elsewhere on the site, so I created a ds the calls the sp. Can it work this way?
thanks,
SQL Server 2012 Standard SP 1.
Stored procedure A calls another stored procedure B. Rowcount is set properly in called procedure B, but does not seem to return it to calling procedure A. Otherwise the two stored procedures are working correctly. Here is the relevant code from the calling procedure A:
declare @NumBufferManagerRows int = 0;
exec persist.LoadBufferManager @StartTicks, @EndTicks, @TimeDiff, @NumBufferManagerRows;
print 'BufferManagerRows';
print @NumBufferManagerRows;
Print statement prints @NumBufferManagerRows as 0.
Here is the called stored procedure B:
CREATE PROCEDURE [persist].[LoadBufferManager]
-- Add the parameters for the stored procedure here
@StartTicks bigint,
@EndTicks bigint,
@TimeDiff decimal(9,2),
@NumRows int OUTPUT
[Code] ...
Any better way to query SQL 2012 to display the code of a stored proc to a single line. I'm trying to write a script to insert the contents of the procs between my devestprod environments. So people can query a single table for any proc that is different between environments. At the moment I am using the syscomments view and the text column but the problem here is if you get a lengthy proc it cuts it up into multiple rows.
I can get around it by converting the text to a varchar(max) and outer joining the query, but as you can see by my code below I have to try and guess what the maximum number of rows I'm going to get back for my largest proc. If someone adds a new one that returns 8 rows I'm going to miss it with this query.
Select col1.[type],col1.[name],convert(varchar(max),col1.text) + isnull(convert(varchar(max),col2.Text),'')
+ isnull(convert(varchar(max),col3.Text),'')
+ isnull(convert(varchar(max),col4.Text),'')
+ isnull(convert(varchar(max),col5.Text),'')
+ isnull(convert(varchar(max),col6.Text),'')
+ isnull(convert(varchar(max),col7.Text),'')
[Code] .....
Hello,
In SQL Server SELECT query Result displays tablePlease
tell how to create stored procedure for a single row at a time i.e. all only ONE row is
displayed at a time exselect name from useswhere name is display is tabular format,but i need in row with coma anc,d,f,f,e,g,h,jin this wayhow can i write a stored procedure for that
What is the purpose of creating table variable and inserting data into it and selecting from table variable inside of stored proc?
Why can't the stored proc just have select statement instead of creating table variable?
I got some xml that is essentially an html table that I need to turn into a standard table resultset from a stored proc. If you take this xml and save it as html that is the desired resultset I am looking for. I realize the <td> tags repeat so I would just prefer 'col' + positional index for the col name. Keep in mind that <td> could be is 1 to n.
<table>
<tr>
<td>cell1</td>
<td>cell2</td>
<td>cell3</td>
[Code] .....
This is my attempt but I can't figure out how to get separate cols
declare @GridData xml = '<table><tr><td>cell1</td><td>cell2</td><td>cell3</td></tr><tr><td>cell4</td><td>cell5</td><td>cell6</td></tr><tr><td>cell7</td><td>cell8</td><td>cell8</td></tr></table>'
select T.C.value('.', 'nvarchar(max)')
from @GridData.nodes('//tr') T(C)
I have a stored procedure that I have written that manipulates date fields in order to produce certain reports. I would like to add a column in the dataset that will be a join from another table (the table name is Periods).
The structure of the periods table is as follows:
[ID] [int] NOT NULL,
[Period] [int] NULL,
[Quarter] [int] NULL,
[Year] [int] NULL,
[PeriodStarts] [date] NULL,
[PeriodEnds] [date] NULL
The stored procedure is currently:
USE [International_Forecast_New]
GO
/****** Object: StoredProcedure [dbo].[GetOpenResult] Script Date: 01/07/2014 11:41:35 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
[Code] ....
What I need is to add the period, quarter and year to the dataset based on the "Store_Open" value.
For example Period 2 looks like this
Period Quarter Year Period Start Period End
2 1 20142014-01-27 2014-02-23
So if the store_open value is 02/05/2014, it would populate Period 2, Quarter 1, Year 2014.
I have a SP with Parameters as:
R_ID
P1
P2
P3
P4
P5
I need to insert into a table as below:
R_ID P1
R_ID P2
R_ID P3
R_ID P4
R_ID P5
How can I get this?
Hi,Am new to Stored Procedures and am lost how to achieve the following. I havethis table:-CREATE TABLE [dbo].[docs] ([ID] [int] IDENTITY (1, 1) NOT NULL ,[ParentID] [int] NULL ,[Name] [varchar] (50) COLLATE Latin1_General_CI_AS NULL ,[Link] [varchar] (100) COLLATE Latin1_General_CI_AS NULL) ON [PRIMARY]GOI want to write a stored procedure to return a single column table. Thefirst field should contain the result of:SELECT ParentID WHERE ID = @id@id being the procedure input parameter.The procedure should then iterate through the table returning subsequent(single column) rows containing the result of:SELECT ParentID WHERE ID = @PreviousRowParentIDUntil NULL is returnedCan anyone help?Thanks,Jack
View 3 Replies View RelatedI have multiple databases in the server and all my databases have tables: stdVersions, stdChangeLog. The stdVersions table have field called DatabaseVersion which stored the version of the database. The stdChangeLog table have a field called ChangedOn which stored the date of any change made in the database.
I need to write a query/stored procedure/function that will return all the database names, version and the date changed on. The results should look something like this:
DatabaseName DatabaseVersion DateChangedOn
OK5_AAGLASS 5.10.1.2 2015/01/12
OK5_SHOPRITE 5.9.1.6 2015/01/10
OK5_SALDANHA 5.10.1.2 2014/12/23
The results should be ordered by DateChangedOn.
Here is the scenario,
I have 2 stored procedures, SP1 and SP2
SP1 has the following code:
declare @tmp as varchar(300)
set @tmp = 'SELECT * FROM
OPENROWSET ( ''SQLOLEDB'', ''SERVER=.;Trusted_Connection=yes'',
''SET FMTONLY OFF EXEC ' + db_name() + '..StoredProcedure'' )'
EXEC (@tmp)
SP2 has the following code:
SELECT *
FROM SP1 (which won't work because SP1 is a stored procedure. A view, a table valued function, or a temporary table must be used for this)
Views - can't use a view because they don't allow dynamic sql and the db_name() in the OPENROWSET function must be used.
Temp Tables - can't use these because it would cause a large hit on system performance due to the frequency SP2 and others like it will be used.
Functions - My last resort is to use a table valued function as shown:
FUNCTION MyFunction
( )
RETURNS @retTable
(
@Field1 int,
@Field2 varchar(50)
)
AS
BEGIN
-- the problem here is that I need to call SP1 and assign it's resulting data into the
-- @retTable variable
-- this statement is incorrect, but it's meaning is my goal
INSERT @retTableSELECT *FROM SP1
RETURN
END
Using a string of IDs passed into a stored procedure as a VARCHAR parameter ('1,2,100,1020,') in an IN without parsing the list to a temp table or table variable. Here's the situation, I've got a stored procedure that is called all the time. It's working with some larger tables (100+ Million rows). The procedure passes in as one of the variables a list of IDs for the large table. This list can have anywhere from 1 to ~100 IDs passed to it.
Currently, we are using a function to parse the list of IDs into a temp table then joining the temp table to get the query:
CREATE PROCEDURE [dbo].[GetStuff] (
@IdList varchar(max)
)
AS
SET NOCOUNT ON
SET TRANSACTION ISOLATION LEVEL READ UNCOMMITTED
[Code] .....
The problem we're running into is that since this proc gets called so often, we sometimes run into tempDB contention that slows this down. In my testing (unfortunately I don't have a good way of generating a production load) swapping the #table for an @table didn't make any difference which makes sense to me given that they are both allocated in the tempDB. One approach that I tried was that since the SELECT query is pretty simple, I moved it to dynamic SQL:
CREATE PROCEDURE [dbo].[GetStuff] (
@IdList varchar(max)
)
AS
SET NOCOUNT ON
SET TRANSACTION ISOLATION LEVEL READ UNCOMMITTED
[Code] ....
The problem I had there, is that it creates an Ad Hoc plan for the query and only reuses it if the same list of parameters are passed in, so I get a higher CPU cost because it compiles a plan and it also causes the plan cache to bloat since the parameter list is almost always different. Is there an approach that I haven't considered that may get the best of both worlds, avoiding or minimizing tempDB contention but also not having to compile a new plan every time the proc is run?
Can We return Table Varibles
Using OUTPUT VARIABLES OR ANY OTHER SOLUTION's.
Pls Sir Help Me
Yaman
Hi there,I need to create a stored procedure almost like "Current_user()" to returnto me the total rows in a table.. Is this possible? plz helpRudi
View 1 Replies View RelatedHi,
I was trying to create a simple SP that return a single value as follows:CREATE PROCEDURE IsListingSaved@MemberID INT,@ListingID INTASIF EXISTS (SELECT [Member_ID] FROM [Member_Listing_Link] WHERE [Member_ID] = @MemberID AND [Listing_ID] = @ListingID) Return 1ELSE Return 0GOWhen I try it out in the Tableadapter's preview table, I get the correct result (1, where the entries exist). However, in the BLL, I tried to get the value as:Dim intResult as IntegerintResult = CType(Adapter.IsListingSaved(intMemberID, intListingID), Integer). However, this always returns 0 (when it should be returning 1). P.S. Curiously, breakpoints skipped the VS generated code for the adapter. What could be the problem? Thanks,Wild Thing
I admit I am a novice to queries and stored procedures but understand stored procedures are more secure, so I am choosing to challenge myself with a stored procedure and have not been successful at all.
What I am looking for is a stored procedure which would query the single table named Hospital, which would search from a single textbox the end user would enter the text they are searching for on a Windows VB application but is dependant on a few end user selected items.
1. The end user can select a radio button either "Starts with" or "Contains"
2. The end user can select from 6 checkboxes (Hospitals, Address, City, State, Zip, Type) to limit or expand their search from the columns in the table.
The table has 17columns (CO, PARENTCO, ADDR, POBox, CITY, State, ZIP, TEL, FAX, WEBSITE, HOSP_TYPE, OWNERSHIP, BEDS, CONTACT, TITLE, Email) but I am only allowing the end user to search by the above 6 columns and need to display the above 6 columns plus the phone, fax and website columns.
After the user clicks the search button it displays the results in a listbox and the user will then select the one they want and it displays the information in another set of textboxes.
Hopefully someone can get me pointed in the right direction! Thanks for your help!
I have a function that returns a table from a comma-delimited string.
I want to take this a step further and create a function that will return a set of tablenames in a table based on a 'group' parameter which is a simple integer...1->9, etc.Obviously, what I am doing is not working out.
CREATE FUNCTION dbo.fnReturnTablesForGroup
(
@whichgroup int
)
RETURNS @RETTAB TABLE (
TABLENAME VARCHAR(50)
[code]....
I have a stored procedure and in that I will be calling a stored procedure. Now, based on the parameter value I will get stored procedure name to be executed. how to execute dynamic sp in a stored rocedure
at present it is like EXECUTE usp_print_list_full @ID, @TNumber, @ErrMsg OUTPUT
I want to do like EXECUTE @SpName @ID, @TNumber, @ErrMsg OUTPUT
How do I return a value in a stored procedure? I want to return a value for TheQuarterId below but under all test conditions am only getting back a negative one. Please help! create PROCEDURE [dbo].[GetQuarterIdBasedOnDescription]
(
@QuarterString nvarchar(10),
@TheQuarterId int output
)
AS
BEGIN
SELECT @TheQuarterId = QuarterId from Quarter WHERE Description=@QuarterString
END
I have a package that I have been attempting to return a error code after the stored procedure executes, otherwise the package works great.
I call the stored procedure from a Execute SQL Task (execute Marketing_extract_history_load_test ?, ? OUTPUT)
The sql task rowset is set to NONE. It is a OLEB connection.
I have two parameters mapped:
tablename input varchar 0 (this variable is set earlier in a foreach loop) ADO.
returnvalue output long 1
I set the breakpoint and see the values change, but I have a OnFailure conditon set if it returns a failure. The failure is ignored and the package completes. No quite what I wanted.
The first part of the sp is below and I set the value @i and return.
CREATE procedure [dbo].[Marketing_extract_history_load_TEST]
@table_name varchar(200),
@i int output
as
Why is it not capturing and setting the error and execute my OnFailure code? I have tried setting one of my parameter mappings to returnvalue with no success.
I have resulting rows from a query similar to the following:
The data is coming from a single table that contains only one coverage code column and one coverage code date, but the end user wants the two coverage code types and dates combined into a single row. So the SELECT looks something like this:
SELECT
[Employee ID] = emp.employee_id,
[Coverage Code 1] = enr.coverage_code,
[Coverage Date 1] = enr.coverage_date,
[Coverage Code 2] = case when enr.product_type = 'Accident.Accident'
then enr.coverage_code else NULL end,
[Code] ....
I basically want to merge the like Employee ID's together into a single row like the following:
I know I have done this before and it is probably pretty simple.
I am looking a script which allow me add single coilumn to multiple table of my database.
For Example :-
I am having 4 table
1-Emp , 2-Dept , 3-Location , 4-Salary like this I have around 100 of table
Now I want to run below command to add column Rowchecksum in all table where table name start with Archivebbx keywords.
Alter table EMP
Add Rowchecksum varbinary(8000)
I am new to work on Sql server,
I have One Stored procedure Sp_Process1, it's returns no of columns dynamically.
Now the Question is i wanted to get the "Sp_Process1" procedure return data into Temporary table in another procedure or some thing.
I am trying to insert values in a single table with four columns from 4 different sources. is it possible to run these 4 insertions in parallel. all these insertion are independent of each other
View 3 Replies View RelatedTo get the results of a stored proc into a table you always had to know the structure of the output and create the table upfront.
CREATE TABLE #Tmp (
Key INT NOT NULL,
Data Varchar );
INSERT INTO #Tmp
EXEC dbo.MyProc
Has SQL 2012 (or SQL 2014) got any features / new tricks to let me discover the table structure of a stored procedure output, - i.e treat it as a table
EXEC dbo.MyProc
INTO #NewTmp
or
SELECT *
INTO #NewTmp
FROM ( EXEC dbo.MyProc )
Hello,
I am trying to access the Return Value provided by a stored procedure executed on SQL Server 2005. The stored procedure has already been tested and it returns the required value. However, I do not know how to access this value. I have tried appending a parameter to the command object using "adParamReturnValue" but that only returns an error. The code works fine without appending this parameter. I have tested it by grabbing the recordset and returning the first field.
To avoid any confusion, I'm not talking about adding an "output" parameter to the stored procedure. I just want to be able to access the return value provided when the procedure is executed. Below is some of the code I am using.
try{
pCmd.CreateInstance((__uuidof(Command)));
pCmd->ActiveConnection = m_pConnection;
pCmd->CommandType = adCmdStoredProc;
pCmd->CommandText = _bstr_t("dbo.GetFlightPlan");
............................ code here ........................................
pCmd->Parameters->Append(pCmd->CreateParameter(_bstr_t("AircraftID"),adChar,adParamInput,7,vAcId));
pCmd->Parameters->Append(pCmd->CreateParameter(_bstr_t("DepartureAerodome"),adChar,adParamInput,4,vDepAero));
pCmd->Parameters->Append(pCmd->CreateParameter(_bstr_t("DestinationAerodome"),adChar,adParamInput,4,vDestAero));
pCmd->Parameters->Append(pCmd->CreateParameter(_bstr_t("DepartureHour"),adInteger,adParamInput,2,vDepHour));
pCmd->Parameters->Append(pCmd->CreateParameter(_bstr_t("DepartureMin"),adInteger,adParamInput,2,vDepMin));
VARIANT returnVal;
returnVal.vt = VT_I2;
returnVal.intVal = NULL;
pCmd->Parameters->Append(pCmd->CreateParameter(_bstr_t("RETURNVALUE"),adInteger,adParamReturnValue,sizeof(_variant_t),returnVal));
//Get Return value by executing the command
//The return value should be the DB unique ID.
pCmd->Execute(NULL, NULL, adCmdStoredProc);
int uniqueId = returnVal.intVal;
//pRst = pCmd->Execute(NULL, NULL, adCmdStoredProc);
//GetFieldValue(0,pRst,uniqueId);
printf("The DB unique ID is: %i",uniqueId);
return uniqueId;
}
Cheers,
Seth
On SQL 2012 (64bit) I have a CLR stored procedure that calls another, T-SQL stored procedure.
The CLR procedure passes a sizeable amount of data via a user defined table type resp.table values parameter. It passes about 12,000 rows with 3 columns each.
For some reason the call of the procedure is verz very slow. I mean just the call, not the procedure.
I changed the procdure to do nothing (return 1 in first line).
So with all parameters set from
command.ExecuteNonQuery()to
create proc usp_Proc1
@myTable myTable read only
begin
return 1
end
it takes 8 seconds.I measured all other steps (creating the data table in CLR, creating the SQL Param, adding it to the command, executing the stored procedure) and all of them work fine and very fast.
When I trace the procedure call in SQL Profiler I get a line like this for each line of the data table (12,000)
SP:StmtCompleted -- Encrypted Text.
As I said, not the procedure or the creation of the data table takes so long, really only the passing of the data table to the procedure.
I have created a trigger that is set off every time a new item has been added to TableA.The trigger then inserts 4 rows into TableB that contains two columns (item, task type).
Each row will have the same item, but with a different task type.ie.
TableA.item, 'Planning'
TableA.item, 'Design'
TableA.item, 'Program'
TableA.item, 'Production'
How can I do this with tSQL using a single select statement?
Is there anyway to clear the procedure cache of a single procedure?
View 9 Replies View RelatedMy overarching goal is to generate sets of random Symptom records for each Enrollee in a drug study, so that for each cycle (period of time), the code will insert a random number of random records for each enrollee.
I'm trying to return a number of random records from a table, but inside a table-valued function... (which could be my problem).
CREATE FUNCTION dbo.ufn_GetTopSymptoms (
@enrollID INT
, @CTCVersion VARCHAR(20)
, @NumRecords INT
)
RETURNS TABLE
[Code] ....
But that ORDER BY NEWID() clause is illegal apparently, because here's the error it throws:
Msg 443, Level 16, State 1, Procedure ufn_GetTopSymptoms, Line 13
Invalid use of a side-effecting operator 'newid' within a function.
I was hoping I could return a set of enrollmentIDs and then use CROSS APPLY to generate a random set of records for each enrollmentID... is this not possible with APPLY? I was trying to avoid using a cursor...
The idea is basically to create all the Symptom records for all the patients in treatment cycle at once by using Enrollee OUTER APPLY dbo.ufn_GetTopSymtoms(dbo.Enrollment.EnrolleeID)
but that's clearly not working. Is there a way to do this without resorting to a cursor?
I need to set a variable to datetime and time to exact milliseconds in SQL server in stored procedure.
Example:
set MyUniqueNumber = 20071101190708733
ie. MyUniqueNumber contains yyyymmddhhminsecms
Please help, i tried the following:
1. SELECT CURRENT_TIMESTAMP; ////// shows up with - & : , I want single string as in above example.2.
select cast(datepart(YYYY,getdate()) as varchar(4))+cast(datepart(mm,getdate()) as char(2))+convert(varchar(2),datepart(dd,getdate()),101 )+cast(datepart(hh,getdate()) as char(2))+cast(datepart(mi,getdate()) as char(2))+cast(datepart(ss,getdate()) as char(2))+cast(datepart(ms,getdate()) as char(4))
This one doesnot display day correctly, it should show 01 but shows 1