SQL Server 2012 :: Syntax Error While Creating Table Dynamically

Apr 19, 2015

I am getting error when I am trying to create table on runtime

Declare @FileName varchar(100)
Declare @File varchar(100)
set @FileName='brkrte_121227102828'
SET @File = SUBSTRING(@FileName,1,CHARINDEX('_',@FileName)-1)
--=select @File

[Code] ....

Error massage:-
Msg 203, Level 16, State 2, Line 16

The name 'CREATE TABLE DataStaging.dbo.Staging_brkrte ( [COL001] VARCHAR (4000) NOT NULL, [Id] Int Identity(1,1), [LoadDate] datetime default getdate() )' is not a valid identifier.

How to resolve above error....

View 4 Replies


ADVERTISEMENT

SQL Server 2012 :: Create Table Syntax Dynamically On Run Time

Apr 19, 2015

I am having 100 of flat files need to load in respective staging table.I want to create table on run time as per filename input.suppose if input filename is ABC then table name should be Staging_ABC if file name is XYZ then it should be Staging_XYZ.Table structure is below need to create at run time

CREATE TABLE Staging_'Filename'(
[COL001] [varchar](4000) NULL,
[Id] [int] IDENTITY(1,1) NOT NULL,
[LoadDate] [datetime] NOT NULL default getdate()
)

View 2 Replies View Related

SQL Server 2012 :: Error Creating Temp Table Based On IF Logic

Nov 13, 2014

I could deploy across my environment, which is a mix of 2008R2/2012 servers, to give some information on log files. Running into a silly issue right off the bat. The table that DBCC LogInfo() conjures out of magic is different between the two. In 2012 it gained the RecoveryUnitID column. So I'm trying to write some logic to create a temp table based on which version is running. I would like to avoid a global temp table if possible. Here's what I've tried:

sp_executesql creates a table outside of the scope of my session:
DECLARE @PrVers NVARCHAR(128)
, @PrVersNum DECIMAL(10,2)
, @StageTable NVARCHAR(1024) = N''

[code]....

View 9 Replies View Related

Error Creating Table - Incorrect Syntax

May 27, 2014

Have been given this code to create a table

CREATE TABLE 'emaillist' (
'id' INT(11) NOT NULL AUTO_INCREMENT,
'clientname' VARCHAR(200) NOT NULL DEFAULT '0',
'email' VARCHAR(200) NOT NULL DEFAULT '0',
PRIMARY KEY ('id')
);

when I execute it says

Msg 102, Level 15, State 1, Line 1
Incorrect syntax near 'emaillist'.

What the correct code should be?

View 3 Replies View Related

Creating A Table Dynamically In SQL Server Express With Asp.net And Vb

Jun 11, 2006

Hi,
Is there a way to dynamically create a new table in sql server express using the code behind with vb on a Page_Load event?
Thanks Matt

View 2 Replies View Related

Creating A Table Through Stored Procedure Shows An Syntax Error

May 26, 2000

hai guys,
i have written a stored procedure which creates a table ex:
USE PUBS
GO
IF EXISTS (SELECT * FROM SYSOBJECTS WHERE NAME = 'RC_STRPROC')
DROP PROCEDURE RC_STRPROC
GO
USE PUBS
GO
CREATE PROCEDURE RC_STRPROC
(@TBLNAME VARCHAR(35), @COLVAL1 VARCHAR(35), @COLVAL2 VARCHAR(35))
AS
IF EXISTS (SELECT * FROM SYSOBJECTS WHERE NAME = '@TBLNAME')
DROP TABLE @TBLNAME
CREATE TABLE @TBLNAME
(@COLVAL1, @COLVAL2)
GO
it gives an syntax error at '@tblname'
can u guys tell me the problem

thanks
hiss

View 2 Replies View Related

SQL Server 2012 :: Return A Table Of Table-names Dynamically?

Sep 14, 2015

I have a function that returns a table from a comma-delimited string.

I want to take this a step further and create a function that will return a set of tablenames in a table based on a 'group' parameter which is a simple integer...1->9, etc.Obviously, what I am doing is not working out.

CREATE FUNCTION dbo.fnReturnTablesForGroup
(
@whichgroup int
)
RETURNS @RETTAB TABLE (
TABLENAME VARCHAR(50)

[code]....

View 9 Replies View Related

SQL Server 2012 :: Dynamically Copy The Table From One DB To Another?

Nov 27, 2014

Need to scheduled to copy table data from one database to another database daily @7:00 AM by creating the table with date and time stamp.

Example :

Test1DB ---> Table1

Test2DB -----> Table1_281120140700 in Day1 and Table2_291120140700 in Day2.....and so.

SELECT * INTO Test2db.dbo.new_table_name FROM Test1db.dbo.old_table_name in this format ??

script and scheduled to run daily @ 7:00AM?

View 1 Replies View Related

SQL Server 2012 :: Insert Into Table Statement Dynamically

Apr 20, 2015

I am having 2 tables one is staging temp and another is main import table.

In my staging table there are 3 column Col001,Id,Loaddate

in Col001 column data are present with '¯' delemeter.

I am having function which is used to load data from staging to import table using one function.

this function create a insert statement.

My Existing function

-- Description: To Split a Delimited field by a Delimiter
ALTER FUNCTION [dbo].[ufn_SplitFieldByDelimiter]
(
@fieldname varchar(max)
,@delimiter varchar(max)
,@delimiter_count int

[Code] ....

I am unable to get correct statement with above function.

View 1 Replies View Related

Creating A Table Dynamically

Jun 10, 2008

Greetings all,

I want to be able to generate a table on the fly. I know I can use dynamic sql to do this but my brains have forzen this afternoon so any help would be much appreciated.

I have the first query that returns one column with three rows. The contents of the these three rows will form the new columns in the dynamically generated table. How can I do this?

Thanks.

View 11 Replies View Related

Dynamically Creating Temp Table Names

Jul 20, 2005

Hello,I am interested in dynamically creating temp tables using avariable in MS SQL Server 2000.For example:DECLARE @l_personsUID intselect @l_personsUID = 9842create table ##Test1table /*then the @l_personsUID */(resultset1 int)The key to the problem is that I want to use the variable@l_personsUID to name then temp table. The name of the temp tableshould be ##Test1table9842 not ##Test1table.Thanks for you help.Billy

View 5 Replies View Related

Creating Table Fields Dynamically From Another Table Row

Aug 31, 2006

Hello all:

Is it possible to creates fields of the table dynamically?. I have this situation in my project. This is just a small sample. I have row of length 140. I don't wan't to declare all this fields manually using the create table command.

The description of table is as, in this table all the field are of type varchar only, there are like 140 columns.

create dummy emp (
field1 VARCHAR(100), field2 varchar(200), field3 VARCHAR(100).... )

Table: Dummy
================================================== ==
field1 field2 field3..........
Empid Empname empaage1 sam 23...........
2 rai 22............
.
.
.
n raj 45.............
================================================== ==
Now I want to create another table as "EMP" , with proper data type
fields too..

create table emp (
empid int, empname varchar(100), empage int....)

The table should look like as:

Table: EMP
================================================== ==
Empid Empname empaage............
1 sam 23...............
2 rai 22................
.
.
.
n raj 45.................
================================================== ==

I want to do this dynamically.....
Some how I need to extract those field from table[dummy]; the first row acts as a column header for the table[Emp] and the subsequent row acts as a record for the table[Emp]

A small rough snippet of the code will be appreciated....

Waiting for replies........
saby

View 1 Replies View Related

SQL Server 2012 :: How To Set Some Restriction On Table Names While Creating

Nov 26, 2013

I need to ensure some naming standards to users while creating tables.

All table name should be in same pattern

(ie., ) TeamName_EmpId_tablename

I need a way to restrict user to follow the naming standard. If any user tries to create table without the above naming standard system should not allow.

View 5 Replies View Related

SQL Server 2012 :: Creating Dynamic Pivot Table

Jul 2, 2014

I am having trouble figuring out why the following code throws an error:

declare
@cols nvarchar(50),
@stmt nvarchar(max)
select @cols = ('[' + W.FKStoreID + ']') from (select distinct FKStoreID from VW_PC_T) as W
select @stmt = '
select *

[Code] ...

The issue that I am having is:

Msg 245, Level 16, State 1, Line 4
Conversion failed when converting the varchar value '[' to data type int.

I know that I have to use the [ ] in order to run the dynamic sql. I am not sure what is failing and why as the syntax seems to be clean to me (obviously it is not).

View 6 Replies View Related

SQL Server 2012 :: Creating A Pivot Like Table Result?

May 20, 2015

I have 2 tables (#raw1 & #raw2). Each has a year (yr) and month (mnth) and a count (cnt1 / cnt2) field. I need a table created as follows:

2013 2014 2015
cnt1 cnt2 cnt1 cnt2 cnt1 cnt2
jan 5 77 77 8 88
etc....

Normally, I would ask about a pivot but since it is months down one side and year and columns on the top, I don't know if a pivot will work.

create table #raw1 ([yr] int, [mnth] int, [cnt1] int)
insert into #raw1 values
(2013, 1, 5)
, (2013, 2, 5)
, (2013, 3, 5)
, (2013, 4, 5)
, (2013, 5, 5)
, (2013, 6, 5)

[code]....

View 1 Replies View Related

SQL Server 2012 :: Creating Pivot Table For SSRS Report

Dec 2, 2014

I have the following query that will serve as a basis for SSRS report

SELECT TOP (1000) d.Project_Name, d.Status, d.Country, d.Region, p.Period, p.Quarter, p.Year, d.Brand, d.Store_Opens_Actual, d.DA, d.DPN, d.StoreNumber,
CONVERT(VARCHAR(10), CASE WHEN ISDATE(d .Store_Opens_Actual) = 1 THEN d .Store_Opens_Actual WHEN ISDATE(d .Store_Opens_Forecast) = 1 AND
ISDATE(d .Store_Opens_Actual) = 0 THEN d .Store_Opens_Forecast WHEN ISDATE(d

[Code] ....

This returns a dataset, that I need to convert into a PIVOT table that should look like the attached spreadsheet.

Having trouble writing the PIVOT table query. I feel like I am missing something conceptually as I am not doing any summing or aggregation. I don't know if dynamics SQL is the solution here or which route to take. I don't know if there is such things as PIVOTING without aggregation. CROSS TAB came to my mind as well.

View 1 Replies View Related

SQL Server 2012 :: Creating And Dropping Global Temporary Table?

Apr 3, 2015

I want to create and drop the global temporary table in same statement.

I am using below command but I am getting below error

Msg 2714, Level 16, State 6, Line 11

There is already an object named '##Staging_Temp' in the database.

if object_id('Datastaging..##Staging_Temp') is not null
begin
drop table ##Staging_Temp
end
CREATE TABLE ##Staging_Temp(
[COL001] [varchar](4000) NULL,

[Code] ....

View 1 Replies View Related

Syntax For Creating Duplicate Table

Nov 29, 2000

Hi
Is there a syntax similar to the oracle in SQL Server?
Oracle statement: create table table2 as select * from table1

which will create table2 with exactly the same structure
and records as table 1

thanks
Liju

View 2 Replies View Related

SQL Server 2012 :: Creating A View Or Procedure From Dynamic Pivot Table

May 29, 2015

I have written a script to pivot a table into multiple columns.

The script works when run on its own but gives an error when i try to create a view or aprocedure from the same script. The temporary table #.... does not work so i have converted it to a cte.

Here is a copy of the script below

-- Dynamic PIVOT
IF OBJECT_ID('#External_Referrals') IS NULL
DROP TABLE #External_Referrals;
GO
DECLARE @T AS TABLE(y INT NOT NULL PRIMARY KEY);

[Code] ....

View 7 Replies View Related

T-SQL Error In Creating A Stored Procedure That Has Three Parameters: Incorrect Syntax Near 'WHERE'

Feb 17, 2008

Hi all,

I copied the the following code from a book to the query editor of my SQL Server Management Studio Express (SSMSE):
///--MuCh14spInvTotal3.sql--///
USE AP --AP Database is installed in the SSMSE--
GO
CREATE PROC spInvTotal3
@InvTotal money OUTPUT,
@DateVar smalldatetime = NULL,
@VendorVar varchar(40) = '%'
AS

IF @DateVar IS NULL
SELECT @DateVar = MIN(InvoiceDate)

SELECT @InvTotal = SUM(InvoiceTotal)
FROM Invoices JOIN Vendors
WHERE (InvoiceDate >= @DateVar) AND
(VendorName LIKE @VendorVar)
GO
///////////////////////////////////////////////////////////////
Then I executed it and I got the following error:
Msg 156, Level 15, State 1, Procedure spInvTotal3, Line 12
Incorrect syntax near the keyword 'WHERE'.
I do not know what wrong with it and how to correct this problem.

Please help and advise.

Thanks,
Scott Chang

View 18 Replies View Related

Error In Creating Table In Sql Server 2000

Aug 10, 2006

AA!I am having problems on creating table through Enterprise Manager. Itgives me Error 1038 i.e. is as followsUnexpected ErrorODBC error: [Microsoft][ODBC SQL Server Driver][SQL Server]Cannot useempty objector column names. Use a single space if necessary.

View 3 Replies View Related

SQL 2012 :: Error While Creating Login?

Jul 22, 2015

SQL Server 2012 Ent. Two node cluster with SP2.

Getting the attached error while creating login.

Login gets created even though the error pops up.

View 4 Replies View Related

SQL 2012 :: Way Of Creating Temp Table

May 22, 2014

I am working with the SP tuning. I want to know clearly about the temp tables.Instead of Select * into #table, it is always better to create temp table structure and insert the data later.Is it true in the case, if the data is small? insert into #table (select colmn1, column 2 from TableA join Table B on JoinC on joinD on..If they use several joins, in that situation, which way of creating temp table would be better?

View 9 Replies View Related

SQL Server 2012 :: Dynamically Hourly Data Extraction?

Dec 1, 2014

I am using SSIS package for pulling the data(last 2 months data).

Since the data size is huge, i have to split the data into hourly basis and pull the data.

how i can make this dynamic? Right now i am changing the hours manually after package execution.

View 9 Replies View Related

SQL Server 2012 :: Dynamically Grow A Data File?

Dec 5, 2014

Is it possible to dynamically grow a data file for TempDB?

I have some TSQL that I want to execute (this is raw tsql, not something I'd typically share) when I get an alert that TempDB is growing.

SET NOCOUNT ON;
DECLARE @TempDB TABLE (FileID tinyint, name varchar(50), size bigint)
DECLARE @TotalSize decimal(19,4), @TotalFiles int, @CurrentTempDBSize bigint, @SQL varchar(1000), @DBName varchar(50)
SET @SQL = ''
INSERT INTO @TempDB

[code]....

ENDThe code runs fine, but doesn't actually increase the size of the file.

View 7 Replies View Related

SQL 2012 :: Creating A Table Based On Non-Join

Oct 21, 2014

I have 2 tables that I need to merge let me explain. I have a range of product ID's that have a product grouping of * meaning all product groups. So I have a table with products and one with around 100 groups

ProdID ProdGrp
-------- ---------
11 *
12 *

ProdGrp ProdGrpDesc
--------- ---------------
A Prod Group A
B Prod Group B
C Prod Group C

I need a table which looks like the below but I have no joining mechanism

ProdID ProdGrp
-------- ---------
11 A
11 B
11 C
12 A
12 B
12 C

View 3 Replies View Related

SQL 2012 :: Creating Dimension From Fact Table?

Dec 19, 2014

I have a fact table with few flag columns.

What is the best way to bring them to dimension?

Do I need to create dimension(dummy) from fact table for each flag or all flags in single dimension?

View 0 Replies View Related

SQL Server 2012 :: Dynamically Map Metadata In A Data Flow Task

Oct 1, 2014

I am tasked with truncating and reloading tables from one server to another. Company policy prevents cross-server queries, but allows SSIS packages with cross-server connections. I am doing this for about 25 tables. I have the table names in a single table & I have created an FEL to execute tasks against each table one-by-one. It works fine to truncate all the tables. I run into issues, though, with the DataFlowTask. I'm able to tell it which server & table to dynamically connect from and to, but it doesn't know how to map the metadata. They're the exact same columns and field names in both source & destination.

View 9 Replies View Related

SQL Server 2012 :: Handling Flat File Destinations Dynamically?

Feb 5, 2015

After performing a join operation on two tables i get the below resultset

pid, fname, typename, pname, pcost

1, cad, bars, product-1, 100

2, har, witte, product-2, 120

3, nes, bars, product-3, 119

Now i need to create files with the obtained resultset like

Column 'fname' is the folder name and 'typename' should be the file in the particular folder.

For example the first record should be inserted into file name 'bars.txt' in the folder 'cad' and third record should be created in file name 'bars.txt' in the folder 'nes'.

View 2 Replies View Related

SQL Server 2012 :: Removal Of Records Dynamically Using Information Schema

Aug 14, 2015

I'm looking to dynamically remove records from tables dynamically using the information schema within SQL Server. Looking to remove records from all the tables within a schema. I have gotten as far as generating the script dynamically then using a while exist clause to execute the delete statements.

DECLARE@TargetSchema varchar(100),
--@LibNameData varchar(100),
@fnameIndex varchar(100),
--@startOFR_SCR_FILENAME_DATE varchar(25),

[code]...

Would like to execute the statements generated by the results from the information schema.

View 6 Replies View Related

How To Dynamically Enter Error Code And Description In A Pre-define Table?

Aug 4, 2006

Hi,

I want to implement error handling my SSIS package. for this I am putting an execute SQL task for a container(which contains different interlinked tasks) in event handler.

Say my first task fails in this container.Immedaitely my sql task which inserts the error code and description should exceute in the event handler and populate my error table in OLAP database.

Any help will be great SSIS gurus.

Thanks in advance.

Regards,

Aman

View 4 Replies View Related

SQL Server 2012 :: Dynamically Create A Script Only Selecting Columns Where There Is Data?

Dec 2, 2013

I have created some dynamic sql to check a temporary table that is created on the fly for any columns that do contain data. If they do the column name is added to a dynamic sql, if not they are excluded. This looks like:

If (select sum(Case when [Sat] is null then 0 else 1 end) from #TABLE) >= 1 begin set @OIL_BULK = @OIL_BULK + '[Sat]' +',' END However, I am currently running this on over 230 columns and large tables 1.3 mil rows and it is quite slow. How I can dynamically create a sql script that only selects the columns in the table where there is data in a speedier manner. Unfortunately it has to be on the fly because the temporary table is created on the fly.

View 1 Replies View Related

Alter Table Syntax Error - Anyone Sees The Error?

Nov 24, 2004

Hello,

the following alter table statement:

ALTER TABLE [dbo].[CalCalendar]
ALTER COLUMN [OID] uniqueidentifier NOT NULL PRIMARY KEY NONCLUSTERED

is answered with:

Server: Msg 156, Level 15, State 1, Line 2
Incorrect syntax near the keyword 'PRIMARY'.

which I consider to be interesting. Anyone has an idea why? I checked documentation but I do not see an error.

Note that:

ALTER TABLE [dbo].[CalCalendar]
ALTER COLUMN [OID] uniqueidentifier NOT NULL

DOES get executed, and

ALTER TABLE [dbo].[CalCalendar]
ALTER COLUMN [OID] uniqueidentifier NOT NULL PRIMARY KEY

produces the same error.

Now, in my understanding this has nothing to do with an index may already exist etc. - the eror indicates a SYNTAX error, before any checking. Makes no sense to me, though, reading the documentation.

So - anyone an idea?

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved