SQL Server 2012 :: Update Table Using CTE Or Using Inner Query On Same Table
Jul 29, 2015
To avoid locking/blocking, or in transaction scope, we are trying make a common practice of writing coide for update commands in our all SPs based on primary key columns in where clause. I have a following scenario...
UPDATE [dbo].[TL_CST_Locker_Issuance] SET
[isActive] = 0
WHERE
LockerIssuanceId IN (SELECT LockerIssuanceId
[Code] ...
What is the better approach and should be followed to avoid locks and gain performance or best approach.
View 7 Replies
ADVERTISEMENT
Apr 3, 2014
I want to update one table with the value from variable using a set based approach.
so the line
>> select @List = coalesce(@list + ',','') + cast(id as varchar(10)) + cast(feetype as varchar(25))
works fine but I want to take @list and use it to update my customers table. here is the full code.
create table customers
(custid int, fee_history varchar(max))
insert into customers
(custid
, fee_history
[code]....
View 5 Replies
View Related
Oct 6, 2014
I am trying to use a stored procedure to update a column in a sql table using the value from a variable table I getting errors because my syntax is not correct. I think table aliases are not allowed in UPDATE statements.
This is my statement:
UPDATE [dbo].[sessions_teams] stc
SET stc.[Talks] = fmt.found_talks_type
FROM @Find_Missing_Talks fmt
WHERE stc.sessionid IN (SELECT sessionid FROM @Find_Missing_Talks)
AND stc.coupleid IN (SELECT coupleid FROM @Find_Missing_Talks)
View 2 Replies
View Related
Oct 28, 2015
I have created a table(T1) from select query result, that Select query is parameterised. Now I need to update the select query table(T1) based on the result every time.
Below is my Query:
ALTER PROCEDURE [dbo].[RPT_Cost_copy]
SELECT MEII.*, SIMM.U_SP2DC, UPPER(SIMM.U_C3C2) AS GRP3,sb.cost, PREV.Z1, PREV.Z3, SB.Z2, SB.Z4,SIMM.U_C3DC1 AS FAM
INTO T1
FROM
(SELECT a.meu, a.mep2, SUM(a.mest) as excst
FROM mei as A WHERE a.myar=@yr and a.mprd=@mth AND LTRIM(A.MCU) <> '' AND LTRIM(A.MRP2) <> ''
[code]....
View 2 Replies
View Related
Oct 11, 2014
I wrote query to update id int(1,1) to some value but its not giving me the result. Is it not possible to update id on the table.
View 7 Replies
View Related
Jun 21, 2014
my table payment_details structure is
payment_id payment_code
1 null
2 null
3 null
4 null
here payment_id is a primary key and i need to update the whole payment_id column to payment_code column.so i just tried the below query
update payment_details
set payment_code = payment_no
where payment_code is null
but it shows subquery error?
View 3 Replies
View Related
Nov 7, 2014
To see where is the problem I am trying to count rows in the database.First I create a table A with 2 columns namely tablename, rowbefore and rowafter and I insert records in it as below.
INSERT INTO A
SELECT TableName = o.name, '', Rows = max(i.rows) FROM sysobjects o
INNER JOIN sysindexes i ON o.id = i.id
WHERE xtype = 'u' AND OBJECTPROPERTY(o.id,N'IsUserTable') = 1
GROUP BY o.name
ORDER BY o.name
Then I update rowbefore with rowafter as below.
UPDATE A SET rowbefore = rowafter
Now I launch my application with update records in the database.Then I am trying to update rowafter with new records as below.
UPDATE A
SET rowafter = (SELECT max(sysindexes.rows) FROM sysobjects
INNER JOIN sysindexes ON sysobjects.id = sysindexes.id
WHERE xtype = 'u' AND OBJECTPROPERTY(sysobjects.id,N'IsUserTable') = 1 AND A.tablename = sysobjects.name)
Does this update really update my column rowafter or not?
View 2 Replies
View Related
Sep 21, 2015
I have some stored procedures that do updates using table aliases, like this:
UPDATE TableAlias
SET ColVal = 1
FROM RealTable AS TableAlias
WHERE TableAlias.ColVal <> 1
This allows me to include joins and stuff in the update (not shown) and make it all more readable for me.
It all works fine, and the SSMS parser says it's fine. But I also have another script which looks at sys.sql_expression_dependencies and sys.objects to find stored procedures with invalid object references (see below), and it's understandably saying that all of the above type stored procedures have invalid references.
SELECT
OBJECT_NAME(DEP.referencing_id) AS referencing_name,
DEP.referenced_entity_name
FROM sys.sql_expression_dependencies AS DEP
WHERE
-- Only validate local references:
(
DEP.referenced_database_name = DB_NAME()
[Code] ....
So I have a couple questions.
1. Is the UPDATE syntax I'm using kosher?
2. Can you recommend any updates to my stored procedure validation script that will better accommodate table aliases like mine?
View 5 Replies
View Related
May 29, 2014
I am writing a query to update table variable. It is throwing me some error.
I have a table variable declared and inserted the data with three columns. I want to update col1 of that table variable when the second column of that table variable= one column from a physical table
update @MYtabvar set @Mytabvar.LatestDate=B.LatestDate from TableB B where @Mytabvar.id=B.ID
View 9 Replies
View Related
Aug 5, 2015
I have a table with 8 columns, I need to update data in multiple columns on this table, this table contains 1 million records, having single update was taking time so I broke the single update into multiple update statements and running multiple update statements in parallel, Each update statement updates different column.
This approach is working fine but I am getting the deadlock error.
Transaction (Process ID 65) was deadlocked on lock | communication buffer resources with another process and has been chosen as the deadlock victim. Rerun the transaction.
I tried with various lock hints but no success.
View 4 Replies
View Related
Dec 26, 2013
In a stored procedure I dynamically create a temp table by selecting the name of Applications from a regular table. Then I add a date column and add the last 12 months. See attachment.
So far so good. Now I want to update the data in columns by querying another regular table. Normally it would be something like:
UPDATE ##TempTable
SET [columName] = (SELECT SUM(columName)
FROM RegularTable
WHERE FORMAT(RegularTable.Date,'MM/yyyy') = FORMAT(##TempMonths.x,'MM/yyyy'))
However, since I don't know what the name of the columns are at any given time, I need to do this dynamically.
how can I get the column names of a Temp table dynamically while doing an Update?
View 4 Replies
View Related
Mar 28, 2015
Our system runs a SQL Server 2012 DB, it has a table (table_a) which has over 10M records. Our system have to receive data file from previous system daily which contains approximate 3M updated or new records for table_a. My job is to update table_a with the new data.
The initial solution is:
1 Create a table (table_b) which structur is as the same as table_a
2 Use BCP to import updated records into table_b
3 Remove outdated data in table_a:
delete from table_a inner join table_b on table_a.key_fileds = table_b.key_fields
4 Append updated or new data into table_a:
insert into table_a select * from table_b
As the test result, this solution is very inefficient. Step 3 costs several hours, e.g. How can I improve it?
View 9 Replies
View Related
Oct 20, 2014
I have a stored proc that contains an update which utilizes a case statement to populate values in a particular column in a table, based on values found in other columns within the same table. The existing update looks like this (object names and values have been changed to protect the innocent):
UPDATE dbo.target_table
set target_column =
case
when source_column_1= 'ABC'then 'XYZ'
when source_column_2= '123'then 'PDQ'
[Code] ....
The powers that be would like to replace this case statement with some sort of table-driven structure, so that the mapping rules defined above can be maintained in the database by the business owner, rather than having it embedded in code and thus requiring developer intervention to perform changes/additions to the rules.
The rules defined in the case statement are in a pre-defined sequence which reflects the order of precedence in which the rules are to be applied (in other words, if a matching value in source_column_1 is found, this trumps a conflicting matching value in source_column_2, etc). A case statement handles this nicely, of course, because the case statement will stop when it finds the first "hit" amongst the WHEN clauses, testing each in the order in which they are coded in the proc logic.
What I'm struggling with is how to replicate this using a lookup table of some sort and joins from the target table to the lookup to replace the above case statement. I'm thinking that I would need a lookup table that has column name/value pairings, with a sequence number on each row that designates the row's placement in the precedence hierarchy. I'd then join to the lookup table somehow based on column names and values and return the match with the lowest sequence number, or something to that effect.
View 9 Replies
View Related
Oct 1, 2015
The objective is to identify orders where an order fee has been applied incorrectly. I have multiple orders per customer, my table contains an orderID and a customerID. Currently if the customer places additional orders before the previous orders have been closed/cancelled, then additional fees are being applied.
Let's say I'm comparing order #1 to order #2. I need to identify these rows where the following is true:-
The CustID is the same.
Order #2 has a more recent order date.
Order #2 has a FeeDate Before the CancelledDate of Order #1 (or Order #1 has no cancellation date).
So in the table the orderID:2835692 of CustID: 24643 has a valid order fee. But all the subsequently placed orders have fees which were applied before the first order was cancelled and so I want to update the FeeInvalid column with a 'Y'. The first fee will always be valid.
I think I understand why the code I am trying doesn't achieve the result I want but I can't figure out how to write it correctly. Below is one example of code I've tried and also code to create the table and insert some test data.
update t1
SET FeeInvalid = 'Y'
FROM MockData t1 Join MockData t2 on t1.CustID = t2.CustID
WHERE t1.CustID = t2.CustID
AND t2.OrderDate > t1.OrderDate
AND t2.FeeDate > t1.CancelledDate
CREATE TABLE [dbo].[MockData](
[OrderID] [float] NULL,
[code]....
View 4 Replies
View Related
Jan 9, 2008
This program gets the values of A and B passed in. They are for table columns DXID and CODE. The textbox GET1 is initialized to B when the page is loaded. When I type another value in GET1 and try to save it, the original initialized value gets saved and not the new value I just typed in. A literal value, like "222" saves but the new GET1.TEXT doesn't.
View 1 Replies
View Related
Jun 26, 2015
how do I get the variables in the cursor, set statement, to NOT update the temp table with the value of the variable ? I want it to pull a date, not the column name stored in the variable...
create table #temptable (columname varchar(150), columnheader varchar(150), earliestdate varchar(120), mostrecentdate varchar(120))
insert into #temptable
SELECT ColumnName, headername, '', '' FROM eddsdbo.[ArtifactViewField] WHERE ItemListType = 'DateTime' AND ArtifactTypeID = 10
--column name
declare @cname varchar(30)
[code]...
View 4 Replies
View Related
Mar 11, 2015
I have run into a perplexing issue with how to UPDATE some rows in my table correctly.I have a Appointment table which has Appointment Times and a Appointment Names. However the Name is only showing on the Appt start Time line. I need it to show for its duration. So for example in my DDL Morning Appt only shows on at 8:00 I need it to show one each line until the next Appt Starts and so on. In this case Morning Appt should show at 8:00,8:15, 8:30.
CREATE TABLE #TEST ( ApptTime TIME, ApptName VARCHAR (20), DURATION TINYINT)
INSERT INTO #TEST VALUES ('8:00', 'Morning Appt', 45), ('8:15', NULL, NULL),('8:30', NULL,NULL),('8:45', 'Brunch Appt', 45),('9:00', NULL,NULL),('9:15', NULL,NULL),
('9:30', 'Afternoon Appt', 30),('9:45', NULL,NULL),('10:00', NULL,NULL).
View 3 Replies
View Related
Jan 21, 2015
I have a table named 'DepartmentItem' which is designed with hierarchy structure. The column 'ParentId' from table DepartmentItem indicates parent-child relationship and department root among records. I have written and run a user-defined function I use recursive approach, but the function runs slowly.
My question: is there a better way to query that hierarchy table instead of using recursive?
** The current user-defined function that is written using recursive:
CREATE FUNCTION dbo.fnGetDepartmentTree
(
@departmentItemId int
)
RETURNS TABLE
AS
RETURN
with DepartmentItemTree(DepartmentItemId , DepartmentItemTypeId , ParentId, ItemOrder, Level)
[code].....
** And definition of table 'DepartmentItem' :
DepartmentItemId int IDENTITY(1,1) NOT NULL,
ParentId int NULL, -- Each department root starts when this column is NULL or the current row is department root. If it is not NULL then the current row has ParentId whose record has DepartmentItemId = ParentId of the current row (see more below)
IsActive bit NOT NULL DEFAULT ((1)),
[Code] .....
View 2 Replies
View Related
Mar 9, 2015
I have query which is used to dynamically insert value but not working. We are trying to get all table names and insert dynamically to all tables by looping through table names.
declare @a varchar(max),@i int;
declare @table table(rno int, name varchar(max))
declare @b varchar(max)
insert into @table
select row_number() over( order by table_name) rno, table_name from INFORMATION_SCHEMA.tables
declare @tblname varchar(max)
[Code] .....
View 1 Replies
View Related
Jul 2, 2015
I have started working with dynamic queries recently. I am using a table variable and need to add a join in query dynamically.
For Eg- @TableVariable
SET @query_from = @query_from + CHAR(10) + ' JOIN @TableVariable on ABC.ID = @TableVariable.ID '
BUt it gives an error that @TableVariable must be declared
View 8 Replies
View Related
Aug 27, 2015
I have a table (ScriptTable) which holds a groupID Nvarchar(10) ,SQLStatement Nvarchar (150)
Table Fields =
GroupID SQLStatement
1234 Select CUSTNO, CUSTNAME,CUSTADDRESS from custtable where customerNo = 'AB123'
9876 Select CUSTNO, CUSTNAME,CUSTADDRESS from custtable where customerNo = 'XY*'
What I need is to take each select statement in turn and add the data into a temp table. I can use any method but it needs to be the most efficient. There can also be a varying number of select statements to run through each time my job is run.
View 6 Replies
View Related
Nov 7, 2014
I have the following Games table:
CREATE TABLE [dbo].[Games](
[ID] [int] IDENTITY(1,1) NOT NULL,
[Lge] [nvarchar](255) NULL,
[GameDate] [date] NULL,
[HomeTeam] [nvarchar](255) NULL,
[Home_Score] [float] NULL,
[AwayTeam] [nvarchar](255) NULL,
[Away_Score] [float] NULL)
with the following data:
INSERT INTO [dbo].[Games2]
([Lge]
,[GameDate]
,[HomeTeam]
,[Home_Score]
,[AwayTeam]
[Code] ....
This gives the standings as:
Team B4 - 1 -
Team C1 - 1 1.5
Team A2 - 5 3
How can I query the data to find the "games behind" at any date?
View 9 Replies
View Related
Dec 9, 2014
My xml is in below format:
DECLARE @MyXML XML
SET @MyXML = '<RS>
<R id="6330">
<WF id="71445">
<WFS id="12790"> <fname>John12790</fname> </WFS>
[Code] ....
I need to insert into table with TSQL query:
My output should be similar below:
John12790 12790 71445 6330
Eric 12791 12790 71445 6330
John12793 12793 71446 6331
Eric12794 12794 71446 6331
otherwise i need to write huge c# code to execute such thing..
View 2 Replies
View Related
Sep 9, 2015
I wan to print out the dynamic query result so that i can use as a script for some tasks.This is the scenario wher i got stuck, i am not able to print out the result as it return only the last value because of OUTPUT param limitation
Is there any way to print all the 3 INSERT stmt.
IF OBJECT_ID ('tempdb.dbo.#temp') IS NOT NULL
DROP TABLE #temp
CREATE TABLE #temp (Command varchar(8000))
INSERT INTO #temp
SELECT 'INSERT INTO Test1(column1,column2)values(1,2)'
UNION ALL
SELECT 'INSERT INTO Test2(column1,column2)values(1,2)'
[code]....
View 4 Replies
View Related
Aug 29, 2014
Let's say I have a table of data as per the below..
I'm trying to extract only the green highlighted items..
The rules applied are: Only the latest data concerning all cases, and only 1 line (the latest) per case.
As you can see in the image, I don't want the 2nd,3rd, and 4th record extracted cause they are all superseded by more recent records (identified as they are further in the table).
I've considered using either Distinct or Having? but can't get that to work.. If I could use Distinct but then ensure it's the latest record in the table that would be perfect.
View 7 Replies
View Related
Mar 3, 2015
I have a scenario,
We have equipment table which stores Equipment_ID,Code,Parent_Id etc..for each Equipment_ID there is a Parent_Id. The PK is Equipment_ID Now i want to select the Code for the Parent_Id which also sits in the same table. All the Parent_Id's also are Equipment_ID's.
Equipment table looks like :
Equipment_ID Code DescriptionTreeLevelParent_Id
6132 S2611aaa 4 6130
11165 V2546bbb 3 1022
15211 PF_EUccc 5 15192
39539 VP266ddd 4 35200
5696 KA273eee 3 3215
39307 VM2611fff 4 35163
39398 IK264ggg 4 35177
There is another table for Equipment_Tree which has got Equipment_Tree_ID,Parent_Id and Equipment_ID does not has the Code here.
Select query where i need to select the Code for all Parent_Id's.
View 8 Replies
View Related
Jul 18, 2015
I am working on a query to generate parent child hierarchy from a table.
Table has below records.
--===== If the test table already exists, drop it
IF OBJECT_ID('TempDB..#mytable','U') IS NOT NULL
DROP TABLE #mytable
--===== Create the test table with
CREATE TABLE #mytable
[Code] ...
how to achieve this.l tried with temp tables it doesn't work.
View 5 Replies
View Related
Feb 13, 2006
We have the following two tables :
Link ( GroupID int , MemberID int )
Member ( MemberID int , MemberName varchar(50), GroupID varchar(255) )
The Link table contains the records showing which Member is in which Group. One particular Member can be in
multiple Groups and also a particular Group may have multiple Members.
The Member table contains the Member's ID, Member's Name, and a Group ID field (that will contains comma-separated
Groups ID, showing in which Groups the particular Member is in).
We have the Link table ready, and the Member table' with first two fields is also ready. What we have to do now is to
fill the GroupID field of the Member table, from the Link Table.
For instance,
Read all the GroupID field from the Link table against a MemberID, make a comma-separated string of the GroupID,
then update the GroupID field of the corresponding Member in the Member table.
Please help me with a sql query or procedures that will do this job. I am using SQL SERVER 2000.
View 1 Replies
View Related
Dec 20, 2013
this is my first table
CID-----BID---EID-----Ename-------------Phone---------CELL NO
1--------1----7--------A---------------5047183-----03138236415
1--------1----15-------B---------------5045107-----03212634704
this is my second table
CID-----BID---EID-----Ename-------------Phone---------CELL NO
1--------1----7---------A------------------------------------
1--------1----15--------B------------------------------------
i want a query to update my second table from first table. like this after execute query my second table look like this
CID-----BID---EID-----Ename-------------Phone---------CELL NO
1--------1----7--------A---------------5047183-----03138236415
1--------1----15-------B---------------5045107-----03212634704
View 1 Replies
View Related
May 30, 2015
I want to compare two columns in the same table called start date and end date for one clientId.if clientId is having continuous refenceid and sartdate and enddate of reference that I don't need any caseopendate but if clientID has new reference id and it's start date is not continuous to its previous reference id then I need to set that start date as caseopendate.
I have table containing 5 columns.
caseid
referenceid
startdate
enddate
caseopendate
[code]...
View 4 Replies
View Related
Oct 29, 2015
I have a temporary table #Temp with, among others, a column CountryCode and a column Lastname.I would like to change the ü that appears in some names to u (u umlaut to a plain u), but only for those that have the nationality 'Ned'
My code so far:
Update #Temp
set LastName = replace(Lastname, 'ü', 'ue') WHERE CountryCode = 'Ned'
This code deletes all entries in the column Lastname
I think it must be easy, but I keep staring at the code.
What to do?
View 5 Replies
View Related
Jan 8, 2008
I imported a SQL Table into SQL DataBase, But I can not update this table even with SQL Server management Studio
When I change any data on mentioned table above, Red exclamation sign appears left of the record .
How can I correct this problem?
Thanks.
View 1 Replies
View Related
Aug 12, 2014
I want Compare two Table data and insert changed field to the third table ...
View 9 Replies
View Related
