SQL Server 2012 :: Warning - Null Value Is Eliminated By Aggregate Or Other SET Operation
Apr 28, 2015
In a t-sql 2012 query that will be updated in a stored procedure I am getting the following warning message:
Warning: Null value is eliminated by an aggregate or other SET operation. I would like to get rid of this warning missing without just turning off the warning messages.
I would like to change the sql so that it does not occur. The following is my new sql that generates the warning:
case when (coalesce(a.status,ae.status) = 'A') and (IsNull(ae.excuse, 'U') = 'U') and (IsNull(ae.code, 'DRC') = 'DRC') then
sum(DATEDIFF(minute,pm.startTime,pm.endTime)-coalesce(pm.lunchTime,0)-coalesce(a.presentMinutes,0)) else 0 end as DRCMinutes,
The sql is part of a select statement.
View 1 Replies
ADVERTISEMENT
Nov 26, 2013
I execute the code below
declare @LastDate datetime
SELECT @LastDate = max([LastUpdate])
FROM [exhibitor].[dbo].[blgBelongs]
WHERE (([Table1]=@module1 OR [Table2]=@module2 )or ([Table2]=@module1 OR [Table1]=@module2 )
AND Exists (SELECT [Table1],[Table1ID] FROM [exhibitor].[dbo].[blgBelongs] WHERE table2=30 and table2ID=@dmn_ID))
Before I see @LastDate , I see this warning
Warning: Null value is eliminated by an aggregate or other SET operation.
View 7 Replies
View Related
Dec 28, 2001
Hello,
After running a script in QA, I got several result sets and one of them is "Warning: Null value eliminated from aggregate.". How can I get rid of this output so it's not shown at all. I use the output as a recordset on the ASP page.
Thank you very much.
View 1 Replies
View Related
May 2, 2005
Hey all.
I am getting this warning when I execute my query:
* Warning: Null value is eliminated by an aggregate or other SET operation. *
It is still populating the results fine, but I dont know how to get rid of it. I know one of my solutions is:
SET ANSI_WARNINGS OFF
-- sql code
SET ANSI_WARNINGS ON
Apparently it has to do with the MAX function in the following line:
SELECT @BusinessDay = (SELECT MAX(PeriodDate) FROM TableName)
I checked in the table and PeriodDate column has about 4000 of 10,000 rows blank. so Im assuming that is what is causing the error. what should I do? something like:
SELECT @BusinessDay = ISNULL((SELECT MAX(PeriodDate) , @TodaysDate) From TableName
comments appreciated, thanks!
View 3 Replies
View Related
Mar 19, 2015
I'm getting this error:
Divide by zero error encountered.
Warning: Null value is eliminated by an aggregate or other SET operation.
this is where i'm getting the error:
CASE WHEN Claims.ClaimTotal > 0 then (ISNULL(Claims.ClaimTotal,0) / ISNULL(TotalPrem.TotalPrem,dbo.TrnPolicy.TotalDue)) else 0 END AS LossRatio
View 3 Replies
View Related
Nov 16, 2005
All in the subject.
View 11 Replies
View Related
Nov 20, 2013
I'm using SQL Server 2012 Analysis services in Tabular mode and connected to Oracle Database and while importing, I'm getting below error after importing some rows.
OLE DB or ODBC error: Accessor is not a parameter accessor.. The current operation was cancelled because another operation in the transaction failed.
View 1 Replies
View Related
Oct 5, 2002
I recently upsized my acess 2000 db to SQL 2000, but I am now having errors . . .
Error Type:
Microsoft OLE DB Provider for ODBC Drivers (0x80040E07)
[Microsoft][ODBC SQL Server Driver][SQL Server]The sum or average aggregate operation cannot take a nvarchar data type as an argument.
/data_count.asp, line 4
The code within the asp file:
<% dataSQL = "SELECT SUM(filesize) FROM DL where show=1"
Set datacount = my_Conn.Execute(dataSQL)
anBytes = datacount(0)
%>
Can someone point me to a solution?
Thanks!
View 3 Replies
View Related
Feb 6, 2007
how to solve this problem ....
I want to select te sum of nvarchar column and this error always happen
what is the solution this is my query
"SELECT Datein AS Date,SUM(Durm) AS DurationMin, COUNT (*) AS 'Number of Hits' FROM Rayyan_Log WHERE (DNIS = '"+DropDownList1.SelectedItem.Text +"') AND (Datein between '"+TextBox2.Text+"' and '"+TextBox3.Text+"') GROUP BY Datein ORDER BY Datein"
View 2 Replies
View Related
Jun 24, 2015
I have a data file listing open and close hours for the day of the week. I need to format it like
Mon-Thurs 7:00 AM - 5:00 PM
Fri 8:00 AM - 5:00 PM
Sat 8:00 AM - 1:00 PM
Sun Closed
Here is what the data looks like now.
Mon OpenMon ClosedTue OpenTue ClosedWed OpenWed ClosedThu OpenThu ClosedFri OpenFri ClosedSat OpenSat ClosedSun OpenSun Closed
7:30 AM5:30 PM7:30 AM5:30 PM7:30 AM5:30 PM7:30 AM5:30 PM7:30 AM5:30 PMClosed Closed
7:00 AM6:00 PM7:00 AM6:00 PM7:00 AM7:00 PM7:00 AM6:00 PM7:00 AM6:00 PM8:00 AM5:00 PMClosed
There seems like I would end up 5 lines max?
View 9 Replies
View Related
Aug 20, 2014
I am trying to tie together tables that show quantities of a product committed to an order and quantities on hand by a location.
My end result should look like the below example.
Item Location QtyOnHandByLocation SumQtyCommitTotal
Prod1 NJ 10 10
Prod1 NY 10 0
Prod1 FL 0 0
Prod1 PA 0 0
So I can see I have 10 items in NJ On Hand and Committed to an order. 10 available in NY but not on an order. Then the other two locations have no quantities.
Below is the CTE but it produces inaccurate results. I've tried running it several different ways by playing with the grouping but have no luck thus far.
--create the temp table
Create table #SalesLine
(
Novarchar (50) not null
, LocationCodevarchar (50) not null
, QtyCommitint not null
)
create table #ItemLedgerEntry
[code]....
I am close to the desired results but can't find a way.
View 9 Replies
View Related
Dec 1, 2014
I'm trying to write a query that returns last 30 days data and sums the amount by day. However I need to do it for every year not just the current one(I need to go back as far as 2000).
declare @t table (id int identity(1,1), dt datetime, amt MONEY)
insert into @t (dt, amt)
select '2014-11-30 23:39:35.717' as dt, 66 as amt UNION ALL
select '2014-11-30 23:29:16.747' as dt, 5 as amt UNION ALL
select '2014-11-22 23:25:33.780' as dt, 62 as amt UNION ALL
[Code] ....
--expected output
select '2014-11-30' AS dt, 71 AS Amt UNION ALL
select '2014-11-22' AS dt, 62 AS Amt UNION ALL
select '2014-11-20' AS dt, 66 AS Amt UNION ALL
select '2014-11-18' AS dt, 102 AS Amt UNION ALL
[Code] ....
View 8 Replies
View Related
Feb 16, 2014
i'm building a query to return metrics that will drive 3 seperate pivot tables showing
1. Total count of LineItems per D_Type each month
2. Total count of LineItems per Status each month
3. Avg count of LineItems per Invoice each month
I am able to get the first two, but having hard time with the 3rd.
Here's some representative ddl
create table Remediation
(Invoice nvarchar(10), D_Type nvarchar(20), Status nvarchar(20), RemediationDate datetime);
insert into Remediation values
--this will create data for Jan, 2014
('501', 'Recycle', 'Pass', getdate()-30),
('501', 'Reuse', 'Pass', getdate()-30),
('501', 'Remarket', 'Fail', getdate()-30),
[code]....
how to add the average metric to this query?
View 9 Replies
View Related
Apr 29, 2014
I am trying to create an aggregate table where the value is a rolling sum. Type a on date 1 is the sum of the values in the main tbl. Type a on date 2 is the sum of values for type a on date 1 and date 2. Is this possible? I have been trying update t sql with sum(case where date <= date) statements but can't get it to run.
create table main_table (type nvarchar(10), date int, datavalues int);
insert into main_table
values('a', '1',3);
insert into main_table
values('b', '1',4)
[Code] .....
View 9 Replies
View Related
Feb 19, 2014
I'm trying to write a query to select various columns from 3 tables. In the where clause I use a set of conditions, but most important condition is that I only want to see all results from the different columns where the ph.ProdHeaderDossierCode contains at least 25 lines of processed hours. I tried this with group by and having, but I constant get error messages on all other columns that I want to see: "is invalid in the select list because it is not contained in either an aggregate function or the GROUP BY clause". How can I make this so I can see all information I need?
Here is my code so far:
selectph.CalculatedTotalTime,
ph.ProdHeaderDossierCode,
ph.MachGrpCode,
ph.EmpId,
pd.PartCode
fromdbo.T_ProcessedHour ph,
[Code] ....
View 8 Replies
View Related
Apr 3, 2015
I have a specific variation on the standard 'Column Invalid' question: I have this query that works fine:
SELECT vd.Question ,
csq.Q# ,
csq.Q_Sort ,
csq.Q_SubSort ,
AVG(CAST(vd.Response AS FLOAT)) AS AvgC ,
vd.RType
[Code] ....
When I add this second average column like this:
SELECT vd.Question ,
csq.Q# ,
csq.Q_Sort ,
csq.Q_SubSort ,
AVG(CAST(vd.Response AS FLOAT)) AS AvgC ,
[Code] ....
I get the error: Column 'dbo.vwData.Response' is invalid in the select list because it is not contained in either an aggregate function or the GROUP BY clause.
Clearly things are in the right place before the change, so I can only assume that the OVER clause is my problem. Is this just not possible?
View 1 Replies
View Related
Jun 2, 2006
The following code works perfectly when run by itself:
DECLARE @DateTransaction smalldatetime
DECLARE @TradeDate smalldatetime
SET @DateTransaction = (SELECT Max(DateTransaction) FROM tblImport)
SET @TradeDate = (SELECT Max(DateTrade) FROM tblSystem)
PRINT 'The Transaction Date is ' + CAST(@DateTransaction as varchar) + '. The Trade Date is ' + CAST(@TradeDate as varchar)
However, it is part of a long stored procedure, and when it runs there, I get the following instead of the line confirming the two dates:
Warning: Null value is eliminated by an aggregate or other SET operation.
What could be interfering with this section of the stored procedure?
View 4 Replies
View Related
Jun 28, 2012
Apparently this error was fixed in CU12 for SQL 2008, but it seems to have raised it's head again in SQL 2012.[SSIS.Pipeline] Warning: Warning: Could not open global shared memory to communicate with performance DLL; data flow performance counters are not available. To resolve, run this package as an administrator, or on the system's console.
I've got a client who is seeing it. but I've not seen a fix in CU1 or CU2 for 2012.
View 4 Replies
View Related
Feb 4, 2015
is it possible that this error during backup caused Sort Warning???
I sent to support of our Storage and he make result that this caused jobs which have Sort Warning....
if I checked this error on internet, i found problem with Storage or it can be also lot of fullscan and etc.
So it can be also that Order By caused some reading directly from disk and not from memory ? maybe if there is using tempdb right ?
View 3 Replies
View Related
Mar 7, 2014
Why the Indexes on table slow down the DML operation on table, what is the exact reason?
View 5 Replies
View Related
Jan 30, 2015
which have a lot of impact to database performace since it do not fit onto memory and spill over to disks.
The question is when i ran a profiler and tried to catch a sort warning i cannot find the query which cause the alert.
View 1 Replies
View Related
Sep 17, 2015
I have three variables
DECLARE @QuantityID uniqueidentifier,
@LengthID uniqueidentifier,
@CostID uniqueidentifier
They are sent to the sproc as null. Since they could be null I need to exclude them from posting to a temp table
Example
DECLARE @QuantityID uniqueidentifier,
@LengthID uniqueidentifier,
@CostID uniqueidentifier
SET @CostID = NEWID()
SELECT @QuantityID as ID UNION ALL
SELECT @LengthID UNION ALL
SELECT @CostID
Two values are null. I want those excluded from this table
Here is the example of what I am trying to do:
DECLARE @QuantityID uniqueidentifier,
@LengthID uniqueidentifier,
@CostID uniqueidentifier
DECLARE @Temp as Table (id uniqueidentifier NOT NULL Primary key)
SET @CostID = NEWID()
INSERT INTO @Temp
SELECT @QuantityID as ID UNION ALL
SELECT @LengthID UNION ALL
SELECT @CostID
How do I insert into @Temp only non null values?
View 5 Replies
View Related
Feb 10, 2014
I have two tables, a dates table and a values table. They are joined on the date column.The date table has a range, say from today as far as 20 days from now, incrementing by 1 day each row.The values table may have a row for a day, and may not. If the day has a value I want to display that value.If the day does not have a value in the values table I want to display the last known value.
I think this can be done with windowing functions in a set based manner but have not been able to work it out. I have done it procedurally but im not happy with that at all, and really want to see if this is possible in a set based manner.Below is some simplified code to allow testing with sample data.
create table DimDate
(
DateCol date
)
create table TotalsData
(
DateCol date
[code]....
View 6 Replies
View Related
May 7, 2014
If I have a table
CREATE TABLE [dbo].[logg](
[Id] [bigint] IDENTITY(1,1) NOT NULL,
[Details] [varchar](MAX) NULL)
insert logg (Details) values('')
insert logg (Details) values(null)
Will both statements above access only a single page (as it fits into one page) or does the VARCHAR(MAX) always put its data on a separate page. If so, is the null insert treated differently from the '' insert?
View 2 Replies
View Related
Sep 20, 2014
The following t-sql 2012 works fine in sql management studio. However when I place it in a .net 2010 web form application, I am told the sql does not work when the parameter values are null. Thus can you tell me what I can change in the sql below that will accept null as 3 possible input values?
SELECT i.[lastName]
,i.[firstName]
,i.[middleName]
,i.[suffix]
,a.[userid]
[code]...
View 1 Replies
View Related
Aug 14, 2015
CREATE TABLE A (ID INT IDENTITY (1,1))
CREATE TABLE B (ID INT, EMPID VARCHAR(10))
INSERT INTO A DEFAULT VALUES
GO 5
INSERT INTO B VALUES (1,'E23')
INSERT INTO B VALUES (1,'E24')
INSERT INTO B VALUES (2,'E23')
from the above code i would like to get output like
ID EMPID
1 23
2 23
3 null
4 null
5 null
1 24
2 null
3 null
4 null
5 null
I'm trying like
select a.id, b.empid from (
select * from a cross join (
select distinct empid from b) b
) a
left outer join b on a.id = b.id but i get repetitive rows.
View 7 Replies
View Related
Sep 10, 2015
Question in review today is Creating a Report showing the FName, LName of all Employees not Specified in a region; I would assume "No Value to be Null" Correct?
Or is there another way for me to do this?
This is what I have so far...What am I missing that this is not showing me results?
Select Firstname, Lastname, Region
From Employees
WHERE Region LIKE 'null%';
View 3 Replies
View Related
Jul 13, 2015
I have 2 dbs (SQL 2012) - one contains a trigger that is enabled/disabled by a procedure in the other database. This all works fine.
If I create a Database Project solution in Visual Studio 2012 SSDT (or 2013) for both databases, the stored procedure generates a SQL71502 stating that my trigger name can't be resolved.
To recreate the issue:
CREATE DATABASE DbWithTrigger
GO
USE DbWithTrigger
GO
CREATE TABLE dbo.TblWithTrigger(
Id int NULL,
SomeValue varchar(30) NULL
[code]....
-- Test to confirm
EXEC CrossDbTriggerCall
INSERT DbWithTrigger.dbo.TblWithTrigger VALUES(1, 'Blah blah')
In Visual Studio 2012:
1. Create a new solution with a project named DbWithTrigger
2. In project settings set the Target platform to SQL 2012
2. Import the DbWithTrigger db into this project
3. Create a new project named DbCallsTrigger
4. In project settings set the Target platform to SQL 2012
5. Import the DbCallsTrigger db into this project
6. Add a Database Reference in DbCallsTrigger for DbWithTrigger
When you build the solution both dbs build successfully, however there are two warnings. One is easily resolved by replacing DbWithTrigger in the body of the procedure with [$(DbWithTrigger)] (db variable name for the reference) but I can't find out how to get rid of the other. Is it a bug?
View 1 Replies
View Related
May 1, 2014
I have the following view.
The column prod_Master.M2_Pct is defined as float.Yet for some of the rows, the value in [% of Total Target] comes up as null even though there is a number in prod.Measure column. There is valid non-null data in prod_Master.M2_Pct.
I tried LTRIM(RTRIM(prod.Measure)), but no change.
Use ProdDB
SELECT TOP (100) PERCENT dbo.prod.ProdNo AS [Prod No], dbo.prod.ProdName AS [Prod Name],
CASE WHEN dbo.prod.Measure = 'P1' THEN dbo.prod_Master.P1_Pct
WHEN dbo.prod.Measure = 'P2' THEN dbo.prod_Master.P2_Pct
WHEN dbo.prod.Measure = 'P3' THEN dbo.prod_Master.P3_Pct
WHEN dbo.prod.Measure = 'P4' THEN dbo.prod_Master.P4_Pct
[code]....
View 3 Replies
View Related
Sep 2, 2014
I have a dataset where i want to select the records that matches my input values. But i only want to try macthing a field in my dataset aginst the input value, if the dataset value is not NULL.
I always submit all 4 input values.
@Tyreid, @CarId,@RegionId,@CarAgeGroup
So for the first record in the dataset i get a succesfull output if my input values matches RegionId and CarAgeGroup.
I cant figure out how to create the SQl script for this SELECT?
My dataset
TyreIdCarIdRegionIdCarAgeGroup
NULLNULL1084 2
65351084 1
5351084 1
NULL411085 NULL
120NULLNULL NULL
NULLNULL1084 2
65NULL1084 NULL
View 9 Replies
View Related
Jun 25, 2015
I am looking for the best way to check to see if any columns are still NULL in a record. I have a form that gets filled out by users and the values entered into TableA. There are 6 columns in the table, 5 are responses and column6 indicates if the record is complete. So I want a way to see if all of the first 5 columns are NOT NULL and, if so, mark column6 with a 1.
I am thinking this would be a good thing for a trigger on INSERT or UPDATE to check to see if the first 5 columns are filled in and then mark the record as complete.
View 5 Replies
View Related
Feb 4, 2014
I wrote a select statement, I only want to see orders with max lastUpdatedOn date of 14 days and older. Now my results show dates with all orders of 14 days and older (which is OK), but all others are displayed in the "Uitgifte" column as "NULL". But those orders should not be displayed at all.
selectdistinct ProductionHeader.ProdHeaderOrdNr,
ProductionHeader.PartCode,
ProductionHeader.Description,
ProductionHeader.Qty,
(select max (ProdStatusLog.ProdStatusCode)
[code]...
View 8 Replies
View Related
Mar 18, 2014
I want to create a custom bitwise OR aggregate function.
I want to use it like the built in aggregate functions (MIN, MAX etc.)
SELECT dbo.bitwise_or(bit_string) FROM table
where bit_string is a nvarchar(3)
so for example if the table contains two rows ('100', '001') the above query should return '101'
I would like to implement this as a CLR function/assembly with the aggregate below:
CREATE AGGREGATE dbo.bitwise_or (bit_string nvarchar(3))
RETURNS [nvarchar(3)]
EXTERNAL NAME [Aggregate].[bitwise_or]
I have followed this post to implement amedian aggregate function [URL] ..... but there is a lot of code (not sure what is really needed in my case).
View 9 Replies
View Related
