SQL Server 2012 :: Condition To Identify Values That Are +/- Than 2 Cents?
Jul 23, 2014
I want to identify rows that go negative but only for 2 cents or more as well as identify rows that 2 or more.
I have this expression that does not work how I want it to work:
CASE
WHEN (SUM(FavUnfavCostChange) < (2/100) THEN 'Less'
WHEN SUM(FavUnfavCostChange) > (2/100) THEN 'More'
ELSE NULL
END AS 'Flag'
But I get:
0.00000815000000000000More -- this is not more than 2 cents, is just a positive number
-0.00094700000000000000Less -- this is not less than 2 cents, is just negative number
-0.00222000000000000000Less -- this is not less than 2 cents, is just negative number
-0.00012250000000000000Less -- this is not less than 2 cents, is just negative number
0.00000000000000000000NULL -- this is zero so null is fine
0.01188576000000000000More -- this is not more than 2 cents, is just a positive number
View 3 Replies
ADVERTISEMENT
Jun 26, 2015
I am trying to add a where condition on an ID column(type - INT) with values coming from a variable (type - STRING). i am using cast to cast the ID as Varchar and then apply the condition, but i am not getting any results back. following is an example of what i am trying to do.using temp table in the example , so you can copy the t-sql and run as is.
CREATE TABLE #TABLE1(ID INT)
INSERT INTO #TABLE1 VALUES (1), (2) , (3) , (4)
DECLARE @ID varchar(8000) = '2,4'
[code]....
View 4 Replies
View Related
Jul 15, 2015
I have the following sets of records:
ColA ColB
----- -----
21 A
22 A
23 A
24 B
25 B
26 D
What I want is to be able to identify a set sequence (1,2,3) based upon ColB such that I'd get the following result:
ColA ColB ColC
----- ----- -----
21 A 1
22 A 1
23 A 1
24 B 2
25 B 2
26 D 3
I know that I should be able to get it using ROW_NUMBER() OVER (PARTITION BY ColB ORDER BY ColA), but instead of getting the sequence (1,1,1,2,2,3) I get (1,2,3,1,2,1). Using DENSE_RANK gave me the same results.
View 4 Replies
View Related
Mar 3, 2015
I am in process to develop TSql code to identify change in data.
I read about Binary_checksum and hashbyte. Some people say hashbyte is better than binay_checksum as chances of collision are less.
But if we may consider following, chances exist in hashbyte too. My question is what is the best way to compare data to identify change (I can't configure CDC) ?
select HASHBYTES('SHA','121'+'34'), HASHBYTES('SHA','12'+'134'),BINARY_CHECKSUM('121','34'),BINARY_CHECKSUM('12','134');
View 2 Replies
View Related
Apr 16, 2014
Is there any way to get the Columns Used in where condition in a procedure using SQL?
View 1 Replies
View Related
Apr 23, 2015
Is it possible to stop a query from running if a condition is not met?
I have a stored procedure that returns some email addresses. A condition is that a load of new data should have happened in the current month.
If a load of new data hasn't happened I want the stored procedure to stop and return an error message instead of returning the email addresses.
I have a variable that finds the maximum data load date and I thought I could use an IF... ELSE... to check if new data had been loaded. Like this:
DECLARE @MaxLoadDate as date = (select max(load_date)
from #table)
IF @MaxLoadDate<Dateadd(month, Datediff(month, 0, Getdate()), 0) --First Day of Current Month
<Something here to kill the query>
ELSE
SELECT email_address
FROM... etc
I've tried a couple of things like PRINT 'Error', and SET NO EXEC ON, but the query seems to happily carry on past the IF condition and return the email addresses. I know that data hasn't been loaded this month, so it should fail.
View 2 Replies
View Related
May 7, 2003
How do l select a negative value from a column and set it to 'C' and if its a positive value set it to 'D' for debit
l've written it in layman's terms .Is it wise to use substring or they is a better method......
select
case
when amount is (negative) then 'C'
when amount is (positive) then 'D'
else
end
from table_Tran
View 2 Replies
View Related
Feb 25, 2014
I have a very simple query like the following…
SELECT table2.column_code2,
table2.column_description2,
table2.column_code1,
table1.column_description1
FROM database_001.table2 table1 LFET OUTER JOIN database_001.table2 table1 on (table2.column_code1 = table1.column_code1)
From this query, its returning me a result set of something like below:
--------------------------------------------------------------------------------------------------
column_code1 column_description1 column_code2 column_description2
--------------------------------------------------------------------------------------------------
RO1 BOOK RL1 PDF/ECOPY
RO2 PAPER RL2 CONFERENCE
RO5 JOURNAL RL11 OTHER
Now, on the above query I want to insert three extra columns with the name (status, location and contact) where the results in the extra three columns would be based on the conditions I want to define in the query based on the above results…
Something for example (I am not trying to write a condition: my question is how to write it),
if column_code1 = RO1 and column_description2 = PDF/ECOPY on status column it should return a value ‘ONLINE’ & on location column it should return ‘WEB’ and on contact column it should write ‘BOB’.
Also, if column_code1 = RO5 and column_description1 = JOURNAL on status column it should return a value ‘ON PRESS FOR PRINT’ & on location column it should return ‘S.R STREET, LONDON’ and on contact column it should write ‘SMITH’ like below result…so the final output should be the top four columns and the extra three columns…
See the attachment for better formatting...
---------------------------------------------------------------------------------------------
status location contact
---------------------------------------------------------------------------------------------
ONLINE WEB BOB
ON PRESS FOR PRINT S.R STREET, LONDON SMITH
View 7 Replies
View Related
Sep 15, 2015
Lets say I have a set of columns as follows:
Table.Name - Table.ID - Table.Code
I want to write a query that will cycle through the results and if it comes across another record that has a matching Table.ID I want to exclude that row from the result set.
I am not all too familiar with how to use either a Case or If..Else Statement within a Sql statement that would accomplish this.
View 7 Replies
View Related
Oct 6, 2015
IF OBJECT_ID('tempdb..#test') IS NOT NULL
DROP TABLE #test
CREATE TABLE #test (TestID CHAR(5) NOT NULL PRIMARY KEY)
INSERT INTO #test
SELECT '1'
[code]....
i am trying to build a dynamic where "or" clause finding difficulties.
View 7 Replies
View Related
Mar 19, 2014
create table #sample
(
Name varchar(100),
value int
[code]....
From that I wanted to delete some records based on following condition. randomly select any number of records but sum(value) = 125 and name = xxx
View 2 Replies
View Related
May 11, 2015
Trying to use LIKE / NOT LIKE to identify values that contain any alphanumeric characters outside of A-Z e.g £%$^&*_-{[@ etc etc
The field should contain only values between A-G with a numberic e.g ABCD1234567... but some rows have characters such as above, some have spaces (weeps) , and some have letters outside the A-G range ....
View 7 Replies
View Related
Nov 30, 2007
I have the SQL query. If the user is selecting all the vendor Numbers available in the vendor number parameter drop down then, I will not include the vendor Number condition in the where portion of the sql query. For that I want to know whether the user has selected all the values available in the drop down. How to identify this?
View 3 Replies
View Related
Oct 12, 2015
I want to join 2 tables, table a and table b where b is a lookup table by left outer join. my question is how can i generate a flag that show whether match or not match the join condition ?
**The lookup table b for column id and country are always not null values, and both of them are the keys to join table a. This is because same id and country can have multiples rows in table a due to update date and posting date fields.
example table a
id country area
1 China Asia
2 Thailand Asia
3 Jamaica SouthAmerica
4 Japan Asia
example table b
id country area
1 China Asia
2 Thailand SouthEastAsia
3 Jamaica SouthAmerica
5 USA America
Expected output
id country area Match
1 China Asia Y
2 Thailand SouthEastAsia Y
3 Jamaica SouthAmerica Y
4 Japan Asia N
View 3 Replies
View Related
Mar 19, 2014
I have a table that lists math Calculations with "User Friendly Names" that look like the following:
([Sales Units]*[AUR])
([Comp Sales Units]*[Comp AUR])
I need to replace all the "User Friendly Names" with "System Names" in the calculations, i.e., I need "Sales Units" to be replaced with "cSalesUnits", "AUR" replaced with "cAUR", "Comp Sales Units" with "cCompSalesUnits", and "Comp AUR" with "cCompAUR". (It isn't always as easy as removing spaces and added 'c' to the beginning of the string...)
The new formulas need to look like the following:
([cSalesUnits]*[cAUR])
([cCompSalesUnits]*[cCompAUR])
I have created a CTE of all the "Look-up" values, and have tried all kinds of joins, and other functions to achieve this, but so far nothing has quite worked.
How can I accomplish this?
Here is some SQL for set up. There are over 500 formulas that need updating with over 400 different "look up" possibilities, so hard coding something isn't really an option.
DECLARE @Synonyms TABLE
(
UserFriendlyName VARCHAR(128)
, SystemNames VARCHAR(128)
)
INSERT INTO @Synonyms
( UserFriendlyName, SystemNames )
[Code] .....
View 3 Replies
View Related
Feb 25, 2015
I am struggling to come up with a set-based solution for this problem (i.e. that doesn't involve loops/cursors) ..A table contains items (identified by an ItemCode) and the set they belong to (identified by a SetId). Here is some sample data:
SetIdItemCode
1A
1B
24
28
26
310
312
410
[code]....
You can see that there are some sets that have the same members:
- 1 and 10
- 2 and 11
- 7, 8 & 9
What I want to do is identify the sets that have the same members, by giving them the same ID in another column called UniqueSetId.
View 8 Replies
View Related
Jul 18, 2014
I have an odd one. I have a SQL job that doesn't have a schedule and is being run each morning. It is a legacy system and I am trying to document the data flow process and I am having a hard time tracking down where/what is starting the job. I see which user executed the job:
SELECT message FROM sysjobhistory WHERE job_id = 'jobid' AND run_date > 'yesterday'
Which is useful, but I want to know what is starting the job.
View 2 Replies
View Related
Jan 15, 2015
How to find if there is a query that can be written on DMV's which will be able to retrieve the indexes that are not being used in a table.
View 2 Replies
View Related
Jun 30, 2015
Is there a way to identify who have changed the SQL port number other than the DBA's?
For example through c2 audit or any other triggers?
View 3 Replies
View Related
Mar 24, 2015
SELECT
c.CustomerId,
c.CustomerName,
co.OrderKey,
co.OrderNumber,
co.CustomerPO,
co.DueDate,
[code]....
sb.CarrierId data is Sec.
Carriers.ExcludeCarriers I have value as 'Sec,QB' list of values.
I am trying to display sb.Carrierid that is not equal to Carriers.excludeCarriers list of values. It fails now and displays sec values in resultset.
View 1 Replies
View Related
Mar 28, 2014
select '$ '+ CONVERT(varchar,CONVERT(decimal(10,0),CONVERT(money, Amt_Value)),1) as [Amount]
from Products
How can I sum this column values and need to set a validation like the column has null values it has to return zero.
View 2 Replies
View Related
Oct 9, 2015
I am using SQL server 2012 and Report builder 3.0 to build my report. I have build a report which product the following table
What I try to achieve is to add 2 calculated field at the bottom of the table which will represent 2 Total value based on a condition
OutTotal field should show the SUM of the Quantity only for ItemStatus=0
InTotal field should show the SUM of the Quantity only for ItemStatus=1
IMPORTANT : I cannot group my data because I need to shown them in a time Wise flow
I have try to insert the first field and define an expression but it gives an #Error. The expression I used is as below
=SUM(IIF(Fields!ItemStatus.Value = 0, Fields!ItemQuantity.Value*Fields!ItemUnitWeight.Value,0))
The Quantity filed in my table is calculated from expression Fields!ItemQuantity.Value*Fields!ItemUnitWeight.Value
View 2 Replies
View Related
Sep 26, 2007
Hi,
I have a table as follows
Table Master
{
Id varchar(20),
Cat1 datetime,
Cat2 datetime,
Cat3 datetime,
Cat4 datetime
}
and the data in the table is as follows
Table Master
{
Id cat1 cat2 cat3 cat4
-----------------------------------------------
1 d11 null d13 d14
2 d21 d22 d23 d24
3 NULL d32 d33 d34
4 d41 d42 NULL NULL
}
I want to retrive column names and its values wheb the ID matches to some value.
Can any one please let me know how to do this?
Thanks alot
~Mohan
View 3 Replies
View Related
Jun 17, 2015
I have a query where i would calculate the counts of three Servers
declare @Managed float
declare @Active float
DECLARE @Values varchar(1000)
SET @Values = 'WE,EE,CO'
select @Managed = count(Name0) from v_R_System where Operating_System_Name_and0 like '%Workstation%'
[Code] ...
Here i need output like below
Workgroup Managed Active
'WE' 255 ,400
'EE' 300 ,450
'CO' 155, 600
So how to use these three values in the where condition when i use the where clause i have put in condition it will give me the subquery returns more than one value,so how should i use this scenario to accomplish this output?
View 3 Replies
View Related
Sep 21, 2007
Hi,
I have at table as foolows
Table Cat3
{
ID,
Update datetime
}
and also have a master table as follows
Table Master
{
ID,
Cat1 Datetime,
Cat2 datettime
}
My requirement is to alter themaster table schema i.e to add a column with the name as of the table name i.e Cat3 and will lok lie as foolows
Table Master
{
ID,
Cat1 Datetime,
Cat2 datettime,
Cat3 Datetime
}
I would like to insert the data to this column. The sample output is as follows
Before insertng the data of table ;Cat3' into the Master table
Table Master
{
Id Cat1 Cat2
---------------------------------
1 D1 D2
2 D2 NULL
3 D3 D4
}
And The Cat3 table data is as follows
Table Cat3
{
ID Update
--------------------------
1 D5
3 D6
4 D7
}
The final putput of the master table should be as follows
Table Master
{
Id Cat1 Cat2 Cat3
------------------------------------------------------
1 D1 D2 D5
2 D2 NULL NULL
3 D3 D4 D6
4 NULL NULL D7
}
Can any one please let me know the query to achieve this
Thank you very much for your time and support
~Moahn
View 10 Replies
View Related
Feb 16, 2005
Can someone give me a clue on this. I'm trying to insert values based off of values in another table.
I'm comparing wether two id's (non keys in the db) are the same in two fields (that is the where statement. Based on that I'm inserting into the Results table in the PledgeLastYr collumn a 'Y' (thats what I want to do -- to indicate that they have pledged over the last year).
Two questions
1. As this is set up right now I'm getting NULL values inserted into the PledgeLastYr collumn. I'm sure this is a stupid syntax problem that i'm overlooking but if someone can give me a hint that would be great.
2. How would I go about writing an If / Else statement in T-SQL so that I can have the Insert statement for both the Yes they have pledged and No they have not pledged all in one stored proc. I'm not to familar with the syntax of writing conditional statements within T-SQL as of yet, and if someone can give me some hints on how to do that it would be greatly appriciated.
Thanks in advance, bellow is the code that I have so far:
RB
Select Results.custID, Results.PledgeLastYr
From Results, PledgeInLastYear
Where Results.custID = PledgeInLastYear.constIDPledgeInLastYear
Insert Into Results(PledgeLastYr)
Values ('Y')
View 1 Replies
View Related
Aug 7, 2007
Hello all. I hope someone can offer me some help. I'm trying to construct a SQL statement that will be run on a Dataset that I have. The trick is that there are many conditions that can apply. I'll describe my situation:
I have about 1700 records in a datatable titled "AISC_Shapes_Table" with 49 columns. What I would like to do is allow the user of my VB application to 'create' a custom query (i.e. advanced search). For now, I'll just discuss two columns; The Section Label titled "AISC_MANUAL_LABEL" and the Weight column "W". The data appears in the following manner:
(AISC_Shapes_Table)
AISC_MANUAL_LABEL W
W44x300 300
W42x200 200
(and so on)
WT22x150 150
WT21x100 100
(and so on)
MT12.5x12.4 12.4
MT12x10 10
(etc.)
I have a listbox which users can select MULTIPLE "Manual Labels" or shapes. They then select a property (W for weight, in this case) and a limitation (greater than a value, less than a value, or between two values). From all this, I create a custom Query string or filter to apply to my BindingSource.Filter method. However I have to use the % wildcard to deal with exceptions. If the user only wants W shapes, I use "...LIKE 'W%'" and "...NOT LIKE 'WT%" to be sure to select ONLY W shapes and no WT's. The problems arises, however, when the user wants multiple shapes in general. If I want to select all the "AISC_MANUAL_LABEL" values with W <= 40, I can't do it. An example of a statement I tried to use to select WT% Labels and MT% labels with weight (W)<=100 is:
Code SnippetSELECT AISC_MANUAL_LABEL, W
FROM AISC_Shape_Table
WHERE (W <= 100) AND ((AISC_MANUAL_LABEL LIKE 'MT%') AND (AISC_MANUAL_LABEL LIKE 'WT%'))
It returns a NULL value to me, which i know is NOT because no such values exist. So, I further investigated and tried to use a subquery seeing if IN, ANY, or ALL would work, but to no avail. Can anyone offer up any suggestions? I know that if I can get an example of ONE of them to work, then I'll easily be able to apply it to all of my cases. Otherwise, am I just going about this the hard way or is it even possible? Please, ANY suggestions will help. Thank you in advance.
Regards,
Steve G.
View 4 Replies
View Related
Jan 28, 2015
I have a table where I need to concatenate and sum based on conditions given below .
CREATE TABLE #DimOrder
(
[ID] [INT] IDENTITY(1,1) NOT NULL,
[OrderID] [INT] NOT NULL,
[SalesRegion] [VARCHAR](5) NULL,
[OrderType] [INT] NOT NULL,
[Code] ....
Example
SELECT 1296 AS OrderID, 2547 AS ProjectID,364 AS ProductID,6 AS FormatID,66 AS MEdiaTypeID,'Fast Track,Fast Track' AS ProductComment,'sq mi' AS UOM,'Y' AS FormatName,'LTO4_800' AS MEdia ,41.67000 AS aPPLIEDRATE
IF OrderID,PrjectID,ProductID,FormatID,MediaTypeID AND AppliedRate AND ProductComment IS different , THEN I want TO concetenate ProductComment AND sum AppliedRate
Example
SELECT 1207 AS OrderID, 2351 AS ProjectID,364 AS ProductID,6 AS FormatID,32 AS MEdiaTypeID,'no charge,final volume' AS ProductComment,'sq mi' AS UOM,'Y' AS FormatName,'3590E' AS MEdia ,55.56000 AS AppliedRate
View 2 Replies
View Related
Apr 29, 2015
I am using below condition for sending mail, but i want add the condition for not to send mail "IF (@mSql2 IS NULL )
-- Condition for Send Mail
SET @mSql2 = N'select * from Tablename';
IF (@mSql2 IS NOT NULL )
BEGIN
SET @tableHTML =
[Code] ....
View 5 Replies
View Related
Oct 28, 2014
I need to generate a report from a table using the values from a filed to determine what to add up.
create table fun_test(
packtype nvarchar(50),
price money)
insert into fun_test
values ('Single',''),('Monthly','25.00'),('Monthly','27.00'),('Monthly','23.50'),('Single',''),('Deposit',''),('Deposit','')
[code]....
order by PackTypeWhat I need is if the PackType is Deposit and need to multiply the number of records by 35, If the PackType is Monthly I need to multiply the records by 25 and if the PackType is Single I need to sum the values in the price column.
View 4 Replies
View Related
May 19, 2015
Create table #table (id int identity , from_country varchar(20) ,
to_country varchar(20),noofdays int, datetravel datetime )
insert into #table(from_country,to_country,noofdays,datetravel)
values
('Malaysia','India',2,getdate()-99),
('India','Singapore',4,getdate()-88),
('Singapore','China',5,getdate()-77),
('China','Japan',6,getdate()-66),
('Japan','USA',7,getdate()-55)
select * from #table
I want to insert data to another table based on "noofdays" columns. If "noofdays" is 4 then 4 rows should inserted to new table with 1 day increment in "datetravel" column.
Ex :
#table
1MalaysiaIndia22015-02-09 02:04:09.247
2IndiaSingapore42015-02-20 02:04:09.247
[code]...
In #table , 1st row noofdays is 2 , so in new table #table_new first 2 rows should inserted with 1 day increment in "datetravel" column.
View 2 Replies
View Related
Mar 17, 2014
I try to do all insert-actions in one SP. But it doesn't work. I couldn't insert any values into the DB. Is this possible or the wrong way?
use env
go
create proc [SP$insert](
@p1 nvarchar(100),
@p2 nvarchar(100),
@id int output,
@debug bit = 0
[Code] ....
View 9 Replies
View Related
Sep 10, 2015
Table : incident
----------------
incident_id usr_id item_id Inc_Date
10059926 191 61006 8-22-2015
10054444 222 3232 6-7-2015
Table: act_reg
--------------
act_reg_id act_type_id incident_id usr_id act_type_sc
454244 1 10059926 191 ASSIGN
471938 115 10059926 191 TRAVEL TIME
473379 40 10059926 191 FOLLOW UP
477652 115 10059926 191 TRAVEL TIME
489091 504 10059926 191 ADD_ATTCHMNTS
477653 504 10054444 222 ADD_ATTCHMNTSParameter: @attach (value=1, Label=Yes & Value=0, Label=No)
Result (While I am selecting 'Yes' in dropdown)
----------------------------------------------
incident_id usr_id item_id
10059926 191 61006
10054444 222 3232
SELECT incident.incident_id,incident.usr_id,incident.item_id
FROM incident
where exists (How i can write query here to check the act_type_sc=ADD_ATTCHMNTS is exists)
View 7 Replies
View Related
