I have an existing function and need to alter function to give result of the values multipiled until its parent is reached.need two seperate functions for city and amt columns..need to also display the parent-description
--CREATE TABLE
CREATE TABLE [dbo].[CityData](
[Id] [int] NULL,
[ParentID] [int] NULL,
[City] [nchar](20) NULL,
[Location] [nchar](50) NULL,
[Amt] [int] NULL
) ON [PRIMARY]
[code]...
From what I've seen, the CheckSum_Agg function appears to returns 0 for even number of repeated values. If so, then what is the practical use of this function for implementing an aggregate checksum across a set of values?
For example, the following work as expected; it returns a non-zero checksum across (1) value or across (2) unequal values.
declare @t table ( ID int );
insert into @t ( ID ) values (-7077);
select checksum_agg( ID ) from @t;
-----------
-7077
declare @t table ( ID int );
insert into @t ( ID ) values (-7077), (-8112);
select checksum_agg( ID ) from @t;
-----------
1035
However, the function appears to returns 0 for an even number of repeated values.
declare @t table ( ID int );
insert into @t ( ID ) values (-7077), (-7077);
select checksum_agg( ID ) from @t;
-----------
0
It's not specific to -7077, for example:
declare @t table ( ID int );
insert into @t ( ID ) values (-997777), (-997777);
select checksum_agg( ID ) from @t;
-----------
0
What's curious is that (3) repeated equal values will return a checksum > 0.
declare @t table ( ID int );
insert into @t ( ID ) values (-997777), (-997777), (-997777);
select checksum_agg( ID ) from @t;
-----------
-997777
But a set of (4) repeated equal values will return 0 again.
declare @t table ( ID int );
insert into @t ( ID ) values (-997777), (-997777), (-997777), (-997777);
select checksum_agg( ID ) from @t;
-----------
0
Finally, a set of (2) uneuqal values repeated twice will return 0 again.
declare @t table ( ID int );
insert into @t ( ID ) values (-997777), (8112), (-997777), (8112);
select checksum_agg( ID ) from @t;
-----------
0
I have a table that lists math Calculations with "User Friendly Names" that look like the following:
([Sales Units]*[AUR])
([Comp Sales Units]*[Comp AUR])
I need to replace all the "User Friendly Names" with "System Names" in the calculations, i.e., I need "Sales Units" to be replaced with "cSalesUnits", "AUR" replaced with "cAUR", "Comp Sales Units" with "cCompSalesUnits", and "Comp AUR" with "cCompAUR". (It isn't always as easy as removing spaces and added 'c' to the beginning of the string...)
The new formulas need to look like the following:
([cSalesUnits]*[cAUR])
([cCompSalesUnits]*[cCompAUR])
I have created a CTE of all the "Look-up" values, and have tried all kinds of joins, and other functions to achieve this, but so far nothing has quite worked.
How can I accomplish this?
Here is some SQL for set up. There are over 500 formulas that need updating with over 400 different "look up" possibilities, so hard coding something isn't really an option.
DECLARE @Synonyms TABLE
(
UserFriendlyName VARCHAR(128)
, SystemNames VARCHAR(128)
)
INSERT INTO @Synonyms
( UserFriendlyName, SystemNames )
[Code] .....
Why can't I multiply a bit variable that is set to TRUE (1) with a value larger than 0 but smaller than 1 without getting an "Arithmetic overflow error"? I have solved the problem by declaring my bits as smallints when I fetch them from the database into a stored procedure and use them in calculations, but I still would like to know why it doesn't work. I'm using SQL Server 2005. DECLARE @bit AS bitSET @bit = 0SELECT 0.1 * @bit -- Gives 0 as expected
SET @bit = 1SELECT 1.1 * @bit -- Gives 1.10 as expected
SELECT 0 * @bit -- Gives 0 as expected
SELECT 0.1 * @bit -- Gives "Arithmetic overflow error converting tinyint to data type numeric."
I have created the below function and apply it on a column in a table to replace the below identified values with Blank. It works fine but i have so many different varieties of values i need to add to ths list. Is there any way i insert these values in a table and call the values from that table instead of writing separate SET Statements.
CREATE FUNCTION [dbo].[sv_ReplaceChar] (@badString varchar(8000))
RETURNS VARCHAR(8000)
AS
BEGIN
[code]...
I want to use max() function and I want to read the input of this function from another database(its name is exhibitor). like below :
select @LastDate=MAX([exhibitor.dbo.Maintable.LastUpdate])but I have error below
Msg 207, Level 16, State 1, Procedure Exec_List, Line 131
Invalid column name 'exhibitor.dbo.Maintable.LastUpdate'.
I have a scalar function, which calculates the similarity of two strings. I use the following query, to compare the entries of one table against the value 'Test' and return the entries, which have a value > 50:
;WITH cte1 AS (
SELECT b.FirstName,
(SELECT fn_similarity('Test', b.FirstName)) AS [Value],
b.LastName
FROM [AdventureWorks2012].[Person].[Person] b
)
SELECT *
FROM cte1
WHERE [Value] > 50.00
ORDER BY [Value] DESC
Now I want to use this query against the first 50 entries of the [Person] table, so that the resultset includes all the values of the first 50 persons and the entries, which are similar to them.
At the moment I use a WHILE-loop and write the five single resultsets in a temporary table. Is there another way / a better way, maybe via a join?
I have setup CDC on 50 tables and then in one SP I’m calling all cdc function like below issue is I'm getting error “an insufficient number of arguments were supplied for the procedure or function cdc.fn_cdc_get_all_changes ... .” as error is not mentioning for which capture instance I'm getting this error so not able to find.
select * from cdc.fn_cdc_get_all_changes_<capture_instance>(@from_lsn, @to_lsn, 'all update old') union all
select * from cdc.fn_cdc_get_all_changes_<capture_instance>(@from_lsn, @to_lsn, 'all update old') union all
select * from cdc.fn_cdc_get_all_changes_<capture_instance>(@from_lsn, @to_lsn, 'all update old') union all
select * from cdc.fn_cdc_get_all_changes_<capture_instance>(@from_lsn, @to_lsn, 'all update old') union all
select * from cdc.fn_cdc_get_all_changes_<capture_instance>(@from_lsn, @to_lsn, 'all update old') union all
select * from cdc.fn_cdc_get_all_changes_<capture_instance>(@from_lsn, @to_lsn, 'all update old') union all
select * from cdc.fn_cdc_get_all_changes_<capture_instance>(@from_lsn, @to_lsn, 'all update old')
How to find which capture instance is failing?
Is it possible to pass multiple values to a TVF, such as using an IN clause?
View 6 Replies View RelatedI need to generate a report from a table using the values from a filed to determine what to add up.
create table fun_test(
packtype nvarchar(50),
price money)
insert into fun_test
values ('Single',''),('Monthly','25.00'),('Monthly','27.00'),('Monthly','23.50'),('Single',''),('Deposit',''),('Deposit','')
[code]....
order by PackTypeWhat I need is if the PackType is Deposit and need to multiply the number of records by 35, If the PackType is Monthly I need to multiply the records by 25 and if the PackType is Single I need to sum the values in the price column.
I am having a hard time getting a variable recognized in a function. The variable is not being seen properly in the charindex function.
@ExtType contains = X
@PhoneNo contains = +1 (202) 123-9876 X012
select @intPos = charindex(@ExtType,Upper(@PhoneNo))
I have the following query that supposes to merge multiple result in a single one and put it into a temporary table:
SELECT DISTINCT [AlphaExtension],
STUFF((SELECT A.[NoteText] + '< BR />' FROM #temp A
WHERE A.[AlphaExtension]=B.[AlphaExtension]
FOR XML PATH('')),1,1,'') As [NoteText]
FROM #temp B
GROUP BY [AlphaExtension], [NoteText]
It is working fine unless by a simple detail. If you look at the second line of the query you will see that I am stuffing together a < BR /> tag (break line) because the contents of the field is going to be spitted directly to the screen and I want that the multiple results be displayed in different lines.
OK, the issue is that it is stuffing & lt ; BR / & gt ; instead < BR /> and therefore the browser is displaying the tag instead to break a line.
I am having staging table with separted by '¯'.I want to split the data with given number .i have given 31 means my main table have 31 column. it should handle the less or more column.
declare @TempTable as Table (Id int identity, sampleData nvarchar(500))
insert into @TempTable (sampleData)
select 'B¯080623719¯¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯Y¯ ¯ ¯ ¯ ¯Y¯Y¯ ¯' union all
select 'B¯106618392¯¯ ¯ ¯ ¯Y¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯'
[code]....
I have a function that accepts a date parameter and uses getdate() as its default value. If a date is passed in, I'm going to have to find records using the datediff method based on input. If no date is passed, I am going to bypass the datediff logic and search for records based on a column called "is_current" which will reduce the query time.
However, I don't know how to tell if the date value in the function came from an input or was the default.
I try to do all insert-actions in one SP. But it doesn't work. I couldn't insert any values into the DB. Is this possible or the wrong way?
use env
go
create proc [SP$insert](
@p1 nvarchar(100),
@p2 nvarchar(100),
@id int output,
@debug bit = 0
[Code] ....
I have a function that accespts a string and a delimeter returns the results in a temp table. I am using the funtion for one of the columns in my view that needs be to split and display the column into different columns. The view takes for ever to run and finally it doesn't split and doesn't display in the column.
Function:
-----------------------------------
ALTER FUNCTION [dbo].[func_Split]
(
@DelimitedString varchar(8000),
[Code].....
Not sure what I am missing in the above view why it doesn't split the string.
I have a question regarding windowing functions. I have a sales order table with the columns "orderid", "customerid", "order_date" and "amount". I use the following query to get the amount of every customer as a additional column:
Select customerid,
orderid,
order_date,
amount,
SUM(amount) OVER (PARTITION BY customerid)
FROM sales_orders
My question is if there is a good way to add another column, which includes the SUM(amount) of the customerid, where the order_date > 2012-01-15 , something like this:
Select customerid,
orderid,
order_date,
amount,
SUM(amount) OVER (PARTITION BY customerid),
SUM(amount) OVER (PARTITION BY customerid WHERE order_date > 2012-01-15)
FROM sales_orders
I know, this is not a valid method, so do you know a way to achieve this? Can I maybe use CROSS APPLY or something like this? I know that I could use a subquery to get this, but is there maybe a way / a better way via window functions?
I am looking for a function or way to return only results which does not include appended characters to order numbers.
For instance, below is a list of order numbers. I only want the order number that is SO-123456
OrderNumbers
SO-123456
SO-123456-01
SO-123456-2
SO-123457
SO-123457-1
SO-123457-02
SO-123458
I would like my query to only show the below results
SO-123456
SO-123457
SO-123458
What functions or query methods could achieve this?
I was hoping for something similar to RTRIM but that is only specific to white space.
I have the following data stored in a column in a table:
£10,000.00 & ' " % < > Guðmundsdóttir Björk Lårs Marqués María-Jose Carreño Quiñones
I query this in a stored procedure using the FOR XML clause and universal table, and store the result in an XML data type variable:
DECLARE@ResultXML
EXECUTE[someStoredProcedure] @Result OUTPUT
This data (as XML) is then written to a file; in order to do this, I CONVERT the data to NVARCHAR since there are unicode characters in the source:
DECLARE@strResultNVARCHAR(MAX)
SET@strResult= CONVERT( NVARCHAR( MAX ), @Result, 1 )
Now this works fine, except on inspection, SQLServer has decided to render the data thus:
£10,000.00 & ' " % < > Guðmundsdóttir Björk Lårs Marqués María-Jose Carreño Quiñones
Why it has changed the apos and quot entities to the corresponding character but not the other entities is beyond me.
how to preserve XML entities?
In t-sql 2012, the followinng sql works fine when I declare @reportID.
IF @reportID <> 0
BEGIN
SELECT 'Students report 1' AS selectRptName, 1 AS rptNumValue
UNION
SELECT 'Students report 2', 2
UNION
[code]...
However when I use the sql above in an ssrs 2012 report, the query does not work since the @reportID parameter can have 0, 1, or up to 200 values.Thus I am thinking of calling the following following function to split out the parameter values:
FUNCTION [dbo].[fn_splitString]
(
@listString VARCHAR(MAX)
)
RETURNS TABLE WITH SCHEMABINDING
AS
RETURN
(
SELECT SUBSTRING(l.listString, sn.Num + 1, CHARINDEX(',', l.listString, sn.Num + 1) - sn.Num - 1) _id
FROM (SELECT ',' + LTRIM(RTRIM(@listString)) + ',' AS listString) l
CROSS JOIN dbo.sequenceNumbers sn
WHERE sn.Num < LEN(l.listString)
AND SUBSTRING(l.listString, sn.Num, 1) = ','
)
GO
how to remove the @reportID <> 0 t-sql above and replace by calling the fn_splitString function?
I would like to create a function that take a value and run some logic and output the value
I have a table like this
Table A
value
*
001
004.00
3.0
1.22
Logic I want to run is
The value that you are passing is numeric and numeric with only decimal 0 value, and then convert it to integer otherwise leave as it is
So if I run a query something like this
Select value, fn_convertointerger(value) as converted_value from TableA
I will get
Value converted_value
* *
001 1
004.00 4
3.0 3
1.22 1.22
2.02 2.02
4.000 4
Jkil& Jkil&
How can I create a function like this to convert specific numeric value?
I have created a function that will check whether the data is null or not. If its null then it will display that as No data else it will display the original value. Below is the function
GO
Object: UserDefinedFunction [dbo].[fnchkNull] Script Date: 3/4/2015 12:01:58 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
[code]...
The code is working good. However i want the return type to be dynamic. If the data type supplied is integer then i want to return a integer value like 0 if its null. if the data value is varchar then i want to return 'No Data'.
using below code to replace the city names, how to avoid hard coding of city names in below query and get from a table.
select id, city,
LTRIM(RTRIM(REPLACE(REPLACE(REPLACE(REPLACE(REPLACE(city,
'JRK_Ikosium', 'Icosium'), 'JRK_Géryville', 'El_Bayadh'),'JRK_Cirta', 'Constantine'),'JRK_Rusicade', 'Philippeville'),
'JRK_Saldae', 'Bougie')))
New_city_name
from towns
Can we use a sql function() in create index as below is giving error , what would be work around if cannt use the function in below scenario
CREATE NONCLUSTERED INDEX [X_ADDRESS_ADDR1_UPPER] ON [dbo].[ADDRESS]
(
UPPER([ADDR_LINE_1]) ASC
)
WITH (SORT_IN_TEMPDB = OFF, DROP_EXISTING = OFF, IGNORE_DUP_KEY = OFF, ONLINE = OFF) ON [PRIMARY]
GO
I have this code:
Declare @sql as varchar(4000)
declare @tbl as varchar(100)
declare @exists as bit
select @tbl = 'ACA_RSF'
select @sql = 'select count(*) from [member_score] where source_tbl = ''' + @tbl + ''''
print @sql
exec (@sql)
and it returns 18 million for a record count.I have this scalar returning function, which models the above, and it returns zero:
select dbo.fnGet_Rec_Count('ACA_RSF') as cnt
here is the code:
alter FUNCTION spGet_Rec_Count
(
@source_tbl varchar(100)
)
RETURNS bigint
AS
BEGIN
-- Declare the return variable here
DECLARE @count bigint
-- Add the T-SQL statements to compute the return value here
select @count = (select count(*) from [member_score] where source_tbl = ''' + @tbl + ''')
-- Return the result of the function
RETURN @count
END
GO
I get zero regardless of where @count is declared as in or bigint.
What i need is to create a function that compares 2 strings variables and if those 2 variables doesn't have at least 3 different characters then return failure , else return success.
View 9 Replies View RelatedI have the following code and trouble reading values of Bank Accounts. If i remove the line it says "xmlns="http://applications.apch1.com/webservice/schema/" then i my query is working. But i cant remove this becasue that is what i will get response from a web service. All the records are stored in the database with this line included.
DECLARE @MyXML XML
SET @MyXML = '<GetEmployeeDetails xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<return xmlns="http://applications.apch1.com/webservice/schema/">
<CustomerID> A8339 </CustomerID>
<BankAccounts>
[Code] .....
I'd like to get a extract table result, with a reference id primary key, showing the maximum dates for events and who was responsible for them. I can get the max(date) field in columns using PIVOT, but can't see a way to get the 'who' field without lots of LEFT JOINs.
Here's some test data and code which shows the principle:
CREATE TABLE #t
(
ref INT ,
id INT ,
who VARCHAR(10) ,
checkin DATE
[Code] ....
The result set is:
ref 1 who1 2 who2 3 who3 4 who4
123 2014-01-18 carol 2014-01-18 andy 2014-01-16 bill 2014-01-17 carol
456 NULL NULL 2014-01-17 NULL NULL NULL NULL NULL
Is there some way to avoid all the LEFT JOINs, maybe by using another PIVOT, to produce the same result?
I have two tables, a dates table and a values table. They are joined on the date column.The date table has a range, say from today as far as 20 days from now, incrementing by 1 day each row.The values table may have a row for a day, and may not. If the day has a value I want to display that value.If the day does not have a value in the values table I want to display the last known value.
I think this can be done with windowing functions in a set based manner but have not been able to work it out. I have done it procedurally but im not happy with that at all, and really want to see if this is possible in a set based manner.Below is some simplified code to allow testing with sample data.
create table DimDate
(
DateCol date
)
create table TotalsData
(
DateCol date
[code]....
The following is sample data I am dealing with.
SELECT * INTO TEMP
FROM
(SELECT 'AAAAA' AS CATEGORY, 'A1000' AS CODE, '01-01-2014' AS STARTDATE, '01-31-2014' AS ENDDATE
UNION
SELECT 'AAAAA' AS CATEGORY, 'A1000' AS CODE, '02-01-2014' AS STARTDATE, '02-28-2014' AS ENDDATE
UNION
SELECT 'AAAAA' AS CATEGORY, 'A1000' AS CODE, '03-01-2014' AS STARTDATE, '03-31-2014' AS ENDDATE
UNION
SELECT 'AAAAA' AS CATEGORY, 'A2000' AS CODE, '04-01-2014' AS STARTDATE, '04-30-2014' AS ENDDATE
UNION
SELECT 'AAAAA' AS CATEGORY, 'A1000' AS CODE, '05-01-2014' AS STARTDATE, '05-31-2014' AS ENDDATE) X
I need to extract the date that the value in CODE column changes to another code for each value of CATEGORY and if there is no change, to record the original CODE value and its startdate for each CATEGORY.
I have 2 queries where I select all accounts with bill code in 'bmonit' example ('12','39','124','1FA') then I also have a Select where the same account might have additional services, that are not in example ('12','39','124','1FA') and for these accounts I need to just put a 'Y' if stop_date is null.
View 4 Replies View RelatedI'm trying to come up with a query for this data:
CREATE TABLE #Visits (OpportunityID int, ActivityID int, FirstVisit date, ScheduledEnd datetime, isFirstVisit bit, isRepeatVisit bit)
INSERT #Visits (OpportunityID, ActivityID, FirstVisit, ScheduledEnd)
SELECT 1, 1001, '2014-08-17', '2014-08-17 12:00:00.000' UNION ALL
SELECT 1, 1002, '2014-08-17', '2014-08-17 17:04:13.000' UNION ALL
SELECT 2, 1003, '2014-08-18', '2014-08-18 20:39:56.000' UNION ALL
[Code] ....
Here are the expected results:
OpportunityIDActivityIDFirstVisitScheduledEndisFirstVisitisRepeatVisit
110012014-08-172014-08-17 12:00:00.00010
110022014-08-172014-08-17 17:04:13.00001
210032014-08-182014-08-18 20:39:56.00001
210042014-08-182014-08-18 18:00:00.00010
[Code] ....
Basically I'd like to mark the first Activity for each OpportunityID as a First Visit if its ScheduledEnd falls on the same day as the FirstVisit, and otherwise mark it as a Repeat Visit.
I have this so far, but it doesn't pick up on that the ScheduledEnd needs to be on the same day as the FirstVisit date to count as a first visit:
SELECT*,
CASE MIN(ScheduledEnd) OVER (PARTITION BY FirstVisit)
WHEN ScheduledEnd THEN 1
ELSE 0
END AS isFirstVisit,
CASE MIN(ScheduledEnd) OVER (PARTITION BY FirstVisit)
WHEN ScheduledEnd THEN 0
ELSE 1
END AS isRepeatVisit
FROM#Visits
The following t-sql 2012 works fine in sql management studio. However when I place it in a .net 2010 web form application, I am told the sql does not work when the parameter values are null. Thus can you tell me what I can change in the sql below that will accept null as 3 possible input values?
SELECT i.[lastName]
,i.[firstName]
,i.[middleName]
,i.[suffix]
,a.[userid]
[code]...