I am having a hard time getting a variable recognized in a function. The variable is not being seen properly in the charindex function.
@ExtType contains = X
@PhoneNo contains = +1 (202) 123-9876 X012
select @intPos = charindex(@ExtType,Upper(@PhoneNo))
I am trying to pull a report with average down time and I getting the error message "Msg 195, Level 15, State 10, Line 4 'AVG' is not a recognized built-in function name." when I try to run the below query. How can I rephrase the AVG(DateDiff) line to calculate this for me?
SELECT
TT.PartNumber
,AVG (TT.TimeToRepair) as [Avg Time to Repair (Hours)]
,AVG(DateDiff (hour,TT.TimeDateReported,TT.DateClosed) as [Turnaround Time(Hours)])
FROM dbo.vt_TroubleTicket TT
WHERE TT.Closed = '-1'
and TT.DateClosed between '1/1/2013' and '1/1/2014'
and (TT.PartNumber = '12345')
GROUP BY TT.PartNumber
Can anybody know ,how can we add builtin functions(ROW_NUMBER()) of Sql Server 2005 into database library.
I get this error when i used into storeprocedure :
ROW_NUMBER() function is not recognized in store procedure.
i used MS SQL SERVER 2005 , so i think "ROW_FUNCTION()" is not in MS SQL SERVER 2005 database library.
I need to add that function into MS SQL SERVER 2005 database library.
Can anbody know how we can add that function into MS SQL SERVER 2005 database library?
Unfortunatly this appers when i am trying to execute the following Query :
SELECT CurrentDate AS EXPR2
FROM [Date]
WHERE (DAy(CurrentDate) = 2)
It seems it doesn't support the (Day) function...Is there any solution or work around for that ?
I am using MS SQL Server 2000. I am reading right off of microsofts web site under Trasact-SQL Reference, on how to use the MIN function. Yet when I try to use it, I get the error:
'min' is not a recognized function name
Here is the sql statement copied right out of Query Analyzer:
select name, count(name), min(
case when not(var6 = '') then 7 else
case when not(var5 ='') then 6 else
case when not(var4 ='') then 5 else
case when not(var3 ='') then 4 else
case when not(var2 ='') then 3 else
case when not(var1 ='') then 2 else 1 end end end end end end as cols
)
from syitabs
where dupef=0
group by name
I am trying to run the following code in SQL Server 2005:
DECLARE @cleartext NVARCHAR(100)
DECLARE @encryptedstuff NVARCHAR(100)
DECLARE @decryptedstuff NVARCHAR(100)
SET @cleartext = 'XYZ'
SET @encryptedstuff = EncryptByPassPhrase('12345', @cleartext)
SELECT @encryptedstuff
SET @decryptedstuff = DecryptByPassphrase('12345', @encryptedstuff)
SELECT @decryptedstuff
and am recieving an error:
Msg 195, Level 15, State 10, Line 5
'EncryptByPassPhrase' is not a recognized function name.
Msg 195, Level 15, State 10, Line 7
'DecryptByPassphrase' is not a recognized function name.
It appears as though this EncryptByPassPhrase and DecryptByPassphrase as supported in 2005 T-SQL commands but when I execute this code in SQL Server Studio it errors out.
Anyone know why?
declare @DatabaseName varchar(128)
set @DatabaseName = 'my new db test'
DECLARE @SQLStr varchar(500)
PRINT @DatabaseName
set @SQLStr = 'use '
+ @DatabaseName
+ ' PRINT '
+ @DatabaseName
EXEC (@SQLStr)
Error Output:
--------------------------------------------------------------------------
my new db test
Server: Msg 911, Level 16, State 1, Line 1
Could not locate entry in sysdatabases for database 'my'. No entry found with that name. Make sure that the name is entered correctly.
-----------------------------------------------------------------------
Any idea how to get the entire database name to be used with spaces in the database name. It prints the @DatabaseName just fine, but in the dynamic sql, it truncates after the first space.
I already tried N'my new db test' in the set statement. That didn't work. I tried using NVARCHAR when declaring the variable.
Let me know as soon as you can. Thanks!!
I have read all of the messages related to the above problem and none have solved the issue.
We have migrated a SQL 2000 database to SQL 2005. Detached from one and attached to the other and then based on some of the conversation I also used the SQL Server 2005's copy option and copied the database. Detached the old one and renamed the new database which was created in the copy process to the old name. Basically getting back to where I started. By the way there are no triggers generated during the process (as was mentioned), nothing to delete as some of the discussion was suggesting.
Big databse, lots of tables and stored procedures. All screens seem to work except when we try to update some data using a stored procedure which takes the data and updates the table. End up getting the above error during the execution. All used to work fine with SQL Server 2000. I have taken the SQL out of the stored procedure and executed manually and it worked but leaving the stored procedure alone and calling it with the updated data we get the INITCOLVS problem. The database is also set to be compatible to 90 so that suggestion also has not fixed the problem. Looking for additional suggestions and solutions. Some one was talking about making a dummy INITCOLVS function, have not done this yet but don't particularly like this suggestion, like to know the cause and the proper solution to the problem.
Again in summary:
Migrated SQL 2000 database to 2005
Have done the copy and attach process to make sure the whole conversion to SQL Server 2005 has taken place.
Have set the compatibility of the database to 90
Updates cause the above error.
Thanks in advance.
Don
how to format the last part of this query which comes from Access.:
SELECT Max(TITLOC.TitleLocID) AS MaxOfTitleLocID, TITLES.TitleID, TITLES.CustLName, TITLES.CustFName, TITLES.RecDT, TITLES.TitleID
FROM (TITLES_WARNING_SENT_qry RIGHT JOIN TITLES ON TITLES_WARNING_SENT_qry.TitleID = TITLES.TitleID) INNER JOIN TITLOC ON TITLES.TitleID = TITLOC.TitleID
WHERE TITLES_WARNING_SENT_qry.TitleID Is Null
GROUP BY TITLES.CustLName, TITLES.CustFName, TITLES.RecDT, TITLES.TitleID, TITLES.TitleID
HAVING (TITLES.RecDT<Date()-31)
I am getting:
'Date' is not a recognized built-in function name.
It is probably something simple but how would I go about converting this part "HAVING (TITLES.RecDT<Date()-31)" to something SQL Server is happy with?
why I am getting this error on the SQl Server 2005 but not getting it on the SQL Server Express? and how to ifx?
Code Snippet
Msg 195, Level 15, State 10, Procedure sp_check_sp, Line 14
'OBJECT_SCHEMA_NAME' is not a recognized built-in function name.
this is my code:
Code Snippet
USE shefa
SET ANSI_NULLS ON
SET QUOTED_IDENTIFIER ON
GO
-- =============================================
-- Author: <Author,,Name>
-- Create date: <Create Date,,>
-- Description: <Description,,>
-- =============================================
ALTER PROCEDURE [dbo].[sp_check_sp]
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
SELECT DB_NAME(st.dbid) DBName
, OBJECT_SCHEMA_NAME(st.objectid, dbid) SchemaName
, OBJECT_NAME(st.objectid, dbid) StoredProcedure
, MAX(cp.usecounts) Execution_count
FROM sys.dm_exec_cached_plans cp
CROSS APPLY sys.dm_exec_sql_text(cp.plan_handle) st
WHERE DB_NAME(st.dbid) IS NOT NULL AND cp.objtype = 'proc'
GROUP BY cp.plan_handle, DB_NAME(st.dbid),
OBJECT_SCHEMA_NAME(objectid, st.dbid),
OBJECT_NAME(objectid, st.dbid)
ORDER BY MAX(cp.usecounts)
END
The row_number functions doesn't seem to be operable in our version of SQL Server 2005 SP2.
We have completely tried everything, including using the sample database, and Query posted in the 2005 SQL Server 2005 Book, which is as follows:
SELECT empid, qty,
ROW_NUMBER() OVER(ORDER BY qty) AS rownum
FROM dbo.Sales
ORDER BY qty;
I get the following error:
Msg 195, Level 15, State 10, Line 2
'ROW_NUMBER' is not a recognized function name.
Below you will find the versions of SQL we are using of 2005.
Microsoft SQL Server Management Studio 9.00.3042.00
Microsoft Analysis Services Client Tools 2005.090.3042.00
Microsoft Data Access Components (MDAC) 2000.085.1117.00 (xpsp_sp2_rtm.040803-2158)
Microsoft MSXML 2.6 3.0 4.0 5.0 6.0
Microsoft Internet Explorer 7.0.5730.11
Microsoft .NET Framework 2.0.50727.42
Operating System 5.1.2600
Please help!! Thanks in Advance,
Jason
Hello All,
Can anyone tell me what is error is and how to resolve it?
Thanks.
Hello I am Prasad , I have written one store procedure as below. But It gives error message ROW_NUMBER() function is not recognized. what's the fault or what should i change.
CREATE PROCEDURE GetProductsOnCatalogPromotion(@DescriptionLength INT,@PageNumber INT,@ProductsPerPage INT,@HowManyProducts INT OUTPUT)AS-- declare a new TABLE variableDECLARE @Products TABLE(RowNumber INT,ProductID INT,Name VARCHAR(50),Description VARCHAR(5000),Price MONEY,Image1FileName VARCHAR(50),Image2FileName VARCHAR(50),OnDepartmentPromotion bit,OnCatalogPromotion bit)-- populate the table variable with the complete list of productsINSERT INTO @ProductsSELECT ROW_NUMBER() OVER (ORDER BY Product.ProductID),ProductID, Name,SUBSTRING(Description, 1, @DescriptionLength) + '...' AS Description, Price,Image1FileName, Image2FileName, OnDepartmentPromotion, OnCatalogPromotionFROM ProductWHERE OnCatalogPromotion = 1-- return the total number of products using an OUTPUT variableSELECT @HowManyProducts = COUNT(ProductID) FROM @Products-- extract the requested page of productsSELECT ProductID, Name, Description, Price, Image1FileName,Image2FileName, OnDepartmentPromotion, OnCatalogPromotionFROM @ProductsWHERE RowNumber > (@PageNumber - 1) * @ProductsPerPageAND RowNumber <= @PageNumber * @ProductsPerPage
I installed SQL server 7.0 beta 3 and I have been experimenting with the full text search capabilities. The catalogs appear to build correctly, but when I issue a query against the full text database, isql/w always returns with `contains` is not a recognized function name. I am confident of my query syntax, since I can execute an identical query against a database without full text search enabled and I get an error stating that the target database does not have full text searching enabled. Has anybody else encountered this? I am hoping that I am missing something obvious/simple.
View 2 Replies View RelatedI've created a SSIS Package and it's connection is based on Environment Variable(please seeprocedure).
Now, I'm trying to create a job that calls this package and it seems that when you view Data Sources, it still pointing to the old server.
But when you open-up the package through BIDS in the same server, it's using the new reference that I have specified in the environment variable (please refer to the first image).
I came across this blog with the same issues as mine. He suggested to re-start the SSIS Service which I already did but nothing happens. I even re-started the SQL Agent but still no luck.
I'm not sure what else is missing except for re-starting the machine which is the last thing I want to do as this is PRODUCTION server.
I am in the middle of taking course 2073B Programming a Microsoft SQL Server 2000 Database. I noticed that in Module9: Implementing User-Defined Functions exercise 2, page 25; step 2 is not returning the correct answer.
Select employeeid,name,title,mgremployeeid from dbo.fn_findreports(2)
It returns manager id for both 2 and 5 and I think it should just return the results only for manager id 2. The query results for step 1 is correct but not for step 2.
Somewhere in the code I think it should compare the inemployeeid with the previous inemployeeid, and then add a counter. If the two inemployeeid are not the same then reset the counter. Then maybe add an if statement or a case statement. Can you help with the logic? Thanks!
Here is the code of the function in the book:
/*
** fn_FindReports.sql
**
** This multi-statement table-valued user-defined
** function takes an EmplyeeID number as its parameter
** and provides information about all employees who
** report to that person.
*/
USE ClassNorthwind
GO
/*
** As a multi-statement table-valued user-defined
** function it starts with the function name,
** input parameter definition and defines the output
** table.
*/
CREATE FUNCTION fn_FindReports (@InEmployeeID char(5))
RETURNS @reports TABLE
(EmployeeID char(5) PRIMARY KEY,
Name nvarchar(40) NOT NULL,
Title nvarchar(30),
MgrEmployeeID int,
processed tinyint default 0)
-- Returns a result set that lists all the employees who
-- report to a given employee directly or indirectly
AS
BEGIN
DECLARE @RowsAdded int
-- Initialize @reports with direct reports of the given employee
INSERT @reports
SELECT EmployeeID, Name = FirstName + ' ' + LastName, Title, ReportsTo, 0
FROM EMPLOYEES
WHERE ReportsTo = @InEmployeeID
SET @RowsAdded = @@rowcount
-- While new employees were added in the previous iteration
WHILE @RowsAdded > 0
BEGIN
-- Mark all employee records whose direct reports are going to be
-- found in this iteration
UPDATE @reports
SET processed = 1
WHERE processed = 0
-- Insert employees who report to employees marked 1
INSERT @reports
SELECT e.EmployeeID, Name = FirstName + ' ' + LastName , e.Title, e.ReportsTo, 0
FROM employees e, @reports r
WHERE e.ReportsTo = r.EmployeeID
AND r.processed = 1
SET @RowsAdded = @@rowcount
-- Mark all employee records whose direct reports have been
-- found in this iteration
UPDATE @reports
SET processed = 2
WHERE processed = 1
END
RETURN -- Provides the value of @reports as the result
END
GO
Koroner writes "Hi all. I'm very new to SQL programming so when I started coding I already expected some problem like the one I now describe to present itself soon.
I'm not an English native speaker, pardon me for making any mistake.
I'm currently programming in ASP.NET using Visual Studio.
I've defined a function which consists of one quite simple query calling itself in a recursive way. The problem occurrs when running a view to check whether the function works prorperly, since the "nesting limit exceeded" error (not exact words) pops up.
I didn't know there was such a limit.
Searching the Web I've learnt there is a way to modify this limit, that is using the OPTION clause and the MAXRECURSION hint.
But the fact is whenever I add the OPTION clause to the SELECT of my function Visual Studio tells me that there is a syntax error near "OPTION" keyword. I'm sure VS is not recognizing the "MAXRECURSION" keyword, because there are no syntax errors and the word is not colored in blue (unlike other keywords).
What puzzles me most is that I tried to define a recursive SELECT provided with OPTION clause within a view or an on-the-fly query and all works fine there.
Thanks for any reply."
i have a column with mulitple ids stored with commas . i want to pass ids and get data along with name from the table..how to get multiselect value in a variable in sql server function
View 4 Replies View RelatedI'm trying to create a simple function that will do a count on a table. I want to pass the table name in form of a parameter to the variable and this function will return the count as an int. See my function below...
CREATE FUNCTION count_rows (@tablename varchar(100)
RETURNS int AS
BEGIN
DECLARE @emp_count AS int
declare @declaration varchar(100)
[Code] ....
The errors I am getting are as follows:
Msg 102, Level 15, State 1, Procedure count_rows, Line 3
Incorrect syntax near 'RETURNS'.
Msg 102, Level 15, State 1, Procedure count_rows, Line 10
Incorrect syntax near '@declaration'.
Msg 178, Level 15, State 1, Procedure count_rows, Line 14
A RETURN statement with a return value cannot be used in this context.
I have created a variable in a SQL Task and assigned it to a string variable. When I debug the container with a breakpoint, I can see the correct date value being assigned to the variable.
I have an ADO Net source setup to an Oracle connection. I need to pull the Oracle data down that has an updated date greater than the updated date in my ODS.
My issue is that the variable is not being passed through to my expression that I use for an ADO Net source.
"SELECT * FROM BI_EDW.GL_JE_HEADERS WHERE LAST_UPDATE_DATE > To_Date('" + (DT_WSTR, 19) @[User::varLastUpdateDate] + "','yyyy-mm-dd hh24:mi:ss')"
I wish my transform variable, so that adding the OR operator, and the words within the quotes are not to put the OR.
ALTER PROCEDURE
@Product = ' 'ORANGE LEMON' BANANA APPLE 'PEACH PEAR' '
AS
-- I WANT TRANSFORM THE WORDS
@PRODUCT = 'ORANGE LEMON' OR BANANA OR APPLE 'PEACH PEAR'
SELECT Description
FROM Production.ProductDescription
WHERE CONTAINS(Description, @PRODUCT)
GO
How to use table variable in SSIS 2012, is it possible to use table variable in SSIS.
I want to insert some results from EXECUTE SQL TASK to this table variable and use this variable in OLEDB SOURCE task in data flow where it is used in SQL query with IN Operation.
The table variable contain multiple values like '100','234','XYZ' Is it possible to do or is there any other solution to achieve this?
I want to use max() function and I want to read the input of this function from another database(its name is exhibitor). like below :
select @LastDate=MAX([exhibitor.dbo.Maintable.LastUpdate])but I have error below
Msg 207, Level 16, State 1, Procedure Exec_List, Line 131
Invalid column name 'exhibitor.dbo.Maintable.LastUpdate'.
I have a scalar function, which calculates the similarity of two strings. I use the following query, to compare the entries of one table against the value 'Test' and return the entries, which have a value > 50:
;WITH cte1 AS (
SELECT b.FirstName,
(SELECT fn_similarity('Test', b.FirstName)) AS [Value],
b.LastName
FROM [AdventureWorks2012].[Person].[Person] b
)
SELECT *
FROM cte1
WHERE [Value] > 50.00
ORDER BY [Value] DESC
Now I want to use this query against the first 50 entries of the [Person] table, so that the resultset includes all the values of the first 50 persons and the entries, which are similar to them.
At the moment I use a WHILE-loop and write the five single resultsets in a temporary table. Is there another way / a better way, maybe via a join?
I have setup CDC on 50 tables and then in one SP I’m calling all cdc function like below issue is I'm getting error “an insufficient number of arguments were supplied for the procedure or function cdc.fn_cdc_get_all_changes ... .” as error is not mentioning for which capture instance I'm getting this error so not able to find.
select * from cdc.fn_cdc_get_all_changes_<capture_instance>(@from_lsn, @to_lsn, 'all update old') union all
select * from cdc.fn_cdc_get_all_changes_<capture_instance>(@from_lsn, @to_lsn, 'all update old') union all
select * from cdc.fn_cdc_get_all_changes_<capture_instance>(@from_lsn, @to_lsn, 'all update old') union all
select * from cdc.fn_cdc_get_all_changes_<capture_instance>(@from_lsn, @to_lsn, 'all update old') union all
select * from cdc.fn_cdc_get_all_changes_<capture_instance>(@from_lsn, @to_lsn, 'all update old') union all
select * from cdc.fn_cdc_get_all_changes_<capture_instance>(@from_lsn, @to_lsn, 'all update old') union all
select * from cdc.fn_cdc_get_all_changes_<capture_instance>(@from_lsn, @to_lsn, 'all update old')
How to find which capture instance is failing?
I want to update one table with the value from variable using a set based approach.
so the line
>> select @List = coalesce(@list + ',','') + cast(id as varchar(10)) + cast(feetype as varchar(25))
works fine but I want to take @list and use it to update my customers table. here is the full code.
create table customers
(custid int, fee_history varchar(max))
insert into customers
(custid
, fee_history
[code]....
I am writing a query to update table variable. It is throwing me some error.
I have a table variable declared and inserted the data with three columns. I want to update col1 of that table variable when the second column of that table variable= one column from a physical table
update @MYtabvar set @Mytabvar.LatestDate=B.LatestDate from TableB B where @Mytabvar.id=B.ID
I have started working with dynamic queries recently. I am using a table variable and need to add a join in query dynamically.
For Eg- @TableVariable
SET @query_from = @query_from + CHAR(10) + ' JOIN @TableVariable on ABC.ID = @TableVariable.ID '
BUt it gives an error that @TableVariable must be declared
What is the purpose of creating table variable and inserting data into it and selecting from table variable inside of stored proc?
Why can't the stored proc just have select statement instead of creating table variable?
I have an existing function and need to alter function to give result of the values multipiled until its parent is reached.need two seperate functions for city and amt columns..need to also display the parent-description
--CREATE TABLE
CREATE TABLE [dbo].[CityData](
[Id] [int] NULL,
[ParentID] [int] NULL,
[City] [nchar](20) NULL,
[Location] [nchar](50) NULL,
[Amt] [int] NULL
) ON [PRIMARY]
[code]...
I have the following query that supposes to merge multiple result in a single one and put it into a temporary table:
SELECT DISTINCT [AlphaExtension],
STUFF((SELECT A.[NoteText] + '< BR />' FROM #temp A
WHERE A.[AlphaExtension]=B.[AlphaExtension]
FOR XML PATH('')),1,1,'') As [NoteText]
FROM #temp B
GROUP BY [AlphaExtension], [NoteText]
It is working fine unless by a simple detail. If you look at the second line of the query you will see that I am stuffing together a < BR /> tag (break line) because the contents of the field is going to be spitted directly to the screen and I want that the multiple results be displayed in different lines.
OK, the issue is that it is stuffing & lt ; BR / & gt ; instead < BR /> and therefore the browser is displaying the tag instead to break a line.
I am having staging table with separted by '¯'.I want to split the data with given number .i have given 31 means my main table have 31 column. it should handle the less or more column.
declare @TempTable as Table (Id int identity, sampleData nvarchar(500))
insert into @TempTable (sampleData)
select 'B¯080623719¯¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯Y¯ ¯ ¯ ¯ ¯Y¯Y¯ ¯' union all
select 'B¯106618392¯¯ ¯ ¯ ¯Y¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯'
[code]....
I have a function that accepts a date parameter and uses getdate() as its default value. If a date is passed in, I'm going to have to find records using the datediff method based on input. If no date is passed, I am going to bypass the datediff logic and search for records based on a column called "is_current" which will reduce the query time.
However, I don't know how to tell if the date value in the function came from an input or was the default.