I am trying to insert values in a single table with four columns from 4 different sources. is it possible to run these 4 insertions in parallel. all these insertion are independent of each other
View 3 RepliesHi:
I have a data flow task in which there is a OLEDB source, derived column item, and a oledb destination. My source is a SQL command, that returns some values. I have some values, that I define in the derived columns, and set default values under the expression column. My question is, I also have some destination columns which in my OLEDB destination need another SQL command. How would I do that? Can I attach two or more OLEDB sources to one destination? How would I accomplish that? Thanks
MA2005
I am have a situation to insert data from multiple sources to a single table.
i.e., multiple and concurrent insert on same table
Will it lead to dead lock at any point? is there any possibility?
How insert will work ? What is the architecture ? Any references to read?
I have created a trigger that is set off every time a new item has been added to TableA.The trigger then inserts 4 rows into TableB that contains two columns (item, task type).
Each row will have the same item, but with a different task type.ie.
TableA.item, 'Planning'
TableA.item, 'Design'
TableA.item, 'Program'
TableA.item, 'Production'
How can I do this with tSQL using a single select statement?
I just created a new table with over 100 Columns and I need to populated just the first 2 columns.
The first columns to populate is an identify column that is the primary key. The second column is a foreign_key to an other column and I am trying to populate this columns with all the values from the foreign_key value. This is what I am trying to do.
column1 = ID
column2= P_CLIENT_D
SET IDENTITY_INSERT PIM1 ON
INSERT INTO PIM1 (P_CLIENT_ID)
SELECT
Client.ID
FROMP_Client
So I am trying to insert both an identity values and a value from an other table while leaving the other columns blank. How do I go about doing this.
I have a table with PO#,Days_to_travel, and Days_warehouse fields. I take the distinct Days_in_warehouse values in the table and insert them into a temp table. I want a script that will insert all of the values in the Days_in_warehouse field from the temp table into the Days_in_warehouse_batch row in table 1 by PO# duplicating the PO records until all of the POs have a record per distinct value.
Example:
Temp table: (Contains only one field with all distinct values in table 1)
Days_in_warehouse
20
30
40
Table 1 :
PO# Days_to_travel Days_in_warehouse Days_in_warehouse_batch
1 10 20
2 5 30
3 7 40
Updated Table 1:
PO# Days_to_travel Days_in_warehouse Days_in_warehouse_batch
1 10 20 20
1 10 20 30
1 10 20 40
2 5 30 20
2 5 30 30
2 5 30 40
3 7 40 20
3 7 40 30
3 7 40 40
How can I update Table 1 to see desired results?
Hi,I have a button that that executes insertion of data into a database. For the data it inserts into one column, the data is located in another database table.As well as this being inserted, I would like more data to be inserted in the same column, which comes from textboxes which are located on the same page as the button that executes the insertion..For example: someone types in information into textboxes, then presses the button. The code behind then inserts the data from the textboxes plus the data from the other table (for which the coding is already done).Here is my current code: public bool [snip](int ProductId) {[snip] command.CommandText = "INSERT INTO Messages (sendername,recievername,message,senddate,subject) VALUES (@sendername,@recievername,@message,@date,@subject)"; command.Parameters.AddWithValue("@sendername", System.Web.HttpContext.Current.User.Identity.Name); DataView dv = SqlDataSource2.Select(DataSourceSelectArguments.Empty) as DataView; string receivername = " " + dv[0]["Usersname"].ToString() + " "; command.Parameters.AddWithValue("@recievername", receivername); DataView dv2 = SqlDataSource3.Select(DataSourceSelectArguments.Empty) as DataView; string message = dv2[0]["paymentinstructions"].ToString(); command.Parameters.AddWithValue("@message", message); command.Parameters.AddWithValue("@subject", TextBox1.Text); command.Parameters.AddWithValue("@date", DateTime.Now); command.ExecuteNonQuery(); con.Close(); command.Dispose(); return true; } So along with "paymentinstructions" being inserted into 'message', I would also like the values from TextBox4, TextBox5 and TextBox6 to be inserted... It would also be good if text could be inserted infront of the values of these textboxes - e.g. Price: "TextBox4's value"Does anyone have any ideas? Reply if it needs further explanation.Thanks,Jon
View 14 Replies View RelatedI would like to compare values in the same table and get the single record with different values in the multiple columns.For table tab1, ID is my key column. If type1 is active (A) then i need to update X else blank on Code1 column and if type2 is active (A) then i need to update X else blank on code2 column. Both type1 and type2 comes from same table for same ID..Below is the example to understand my scenario clearly....
declare @tab1 table (ID varchar(20), dt date, status varchar(1), type varchar(10))
insert into @tab1 values ('55A', '2015-07-30', 'A', 'type1')
insert into @tab1 values ('55A', '2015-07-30', 'C', 'type2')
insert into @tab1 values ('55B', '2015-07-30', 'C', 'type1')
insert into @tab1 values ('55B', '2015-07-30', 'A', 'type2')
[code]....
I have a description field in a table which also stores unit of measure in the same column but with some space between them, I need to split these into two different columns.
For Eg:
Description
APPEARANCE UNIT
BDV KV
DENSITY KG/L
I have the following results:
CustomerProductName ValueChargesNewCharges
13AZ 40005056
13BY 30023
13BX 50003536
13BW 16001312
13BV 107009392
13BU 7000109110
And would like to get my results in 1 row with the Customer then 2 columns for Products, 6 columns for Name/Value/Charges/NewCharges.
how we can replace the multiple values in a single select statement? I have to build the output based on values stored in a table. Please see below the sample input and expected output.
DECLARE @V1 NVARCHAR(100)
SELECT @V1 = 'FirstName: @FN, LastName: @LN, Add1: @A1, Add2: @A2 '
DECLARE @T1 TABLE
(FN VARCHAR(100), LN VARCHAR(100), A1 VARCHAR(100), A2 VARCHAR(100))
[code]....
I have Table Staffsubjects
with columns and Values
Guid AcademyId StaffId ClassId SegmentId SubjectId Status
1 500 101 007 101 555 1
2 500 101 007 101 201 0
3 500 22 008 105 555 1
I need to do 3 scenarios in this table.
1.First i need to update the row if the status column is 0 to 1
2.Need to insert the row IF SegmentId=@SegmentId and SubjectId<>@SubjectId and StaffId=@StaffId
3.Need to insert the row IF StaffId<>@StaffId And ClassId=@ClassId and SegmentId<>@SegmentId and SubjectId<>@SubjectId
I have wrote the stored procedure to do this. But the problem is If do the update. It is reflecting in the database by changing 0 to 1. But it shows error like cannot insert the duplicate
Here is the stored Procedure what i have wrote
ALTER PROCEDURE [dbo].[InsertAssignTeacherToSubjects]
@AcademyId uniqueidentifier,
@StaffId uniqueidentifier,
@ClassId uniqueidentifier,
@SegmentId uniqueidentifier,
@SubjectId uniqueidentifier
[Code] ....
I got 1 xml source and 1 sql DB table..
Eg: Contact table in xml contains
Email
--------
bbb@yaho.com
aaa@yahoo.com
ccc@yahoo.com
then COntact table in SQL server contains
aaa@yahoo.com
ccc@yahoo.com
zzz@yahoo.com
i want to compare the two table if got same value update the row..
how to compare it in SSIS
thx
table2 is intially populated (basically this will serve as historical table for view); temptable and table2 will are similar except that table2 has two extra columns which are insertdt and updatedt
process:
1. get data from an existing view and insert in temptable
2. truncate/delete contents of table1
3. insert data in table1 by comparing temptable vs table2 (values that exists in temptable but not in table2 will be inserted)
4. insert data in table2 which are not yet present (comparing ID in t2 and temptable)
5. UPDATE table2 whose field/column VALUE is not equal with temptable. (meaning UNMATCHED VALUE)
* for #5 if a value from table2 (historical table) has changed compared to temptable (new result of view) this must be updated as well as the updateddt field value.
I am working on a sql data that has a list of product names, shipment type and the count of shipments. The values are listed as rows in the database. it will be in the below format.I want to transpose only the shipment type and the corresponding count of each product name in the below format.I tried to do this but i am not able to achieve in the correct format.
View 6 Replies View RelatedI have multiple databases in the server and all my databases have tables: stdVersions, stdChangeLog. The stdVersions table have field called DatabaseVersion which stored the version of the database. The stdChangeLog table have a field called ChangedOn which stored the date of any change made in the database.
I need to write a query/stored procedure/function that will return all the database names, version and the date changed on. The results should look something like this:
DatabaseName DatabaseVersion DateChangedOn
OK5_AAGLASS 5.10.1.2 2015/01/12
OK5_SHOPRITE 5.9.1.6 2015/01/10
OK5_SALDANHA 5.10.1.2 2014/12/23
The results should be ordered by DateChangedOn.
I have a table that lists math Calculations with "User Friendly Names" that look like the following:
([Sales Units]*[AUR])
([Comp Sales Units]*[Comp AUR])
I need to replace all the "User Friendly Names" with "System Names" in the calculations, i.e., I need "Sales Units" to be replaced with "cSalesUnits", "AUR" replaced with "cAUR", "Comp Sales Units" with "cCompSalesUnits", and "Comp AUR" with "cCompAUR". (It isn't always as easy as removing spaces and added 'c' to the beginning of the string...)
The new formulas need to look like the following:
([cSalesUnits]*[cAUR])
([cCompSalesUnits]*[cCompAUR])
I have created a CTE of all the "Look-up" values, and have tried all kinds of joins, and other functions to achieve this, but so far nothing has quite worked.
How can I accomplish this?
Here is some SQL for set up. There are over 500 formulas that need updating with over 400 different "look up" possibilities, so hard coding something isn't really an option.
DECLARE @Synonyms TABLE
(
UserFriendlyName VARCHAR(128)
, SystemNames VARCHAR(128)
)
INSERT INTO @Synonyms
( UserFriendlyName, SystemNames )
[Code] .....
How do I write a query using the split function for the following requirement.I have a table in the following way
Identity Name Col1 Col2 Col3
1 Test1 1,2,3 200,300,400 3,4,6
2 Test2 3,4,5 300,455,600 2,3,8
I want an output in the following format
Identity Name Col1 Col2 Col3
1 Test1 1 200 3
1 Test1 2 300 4
1 Test1 3 400 6
2 Test2 3 300 2
2 Test2 4 455 3
2 Test2 5 600 8
If you see the data, first element in col1 is matched to first element in col2 and 3 after splitting the string.
I've got some records like this:
ID_________Jan Feb...........................Dec
0000030257 0 0 0 0 0 0 1 1 1 1 1 0
where each month field has a 0 or 1, depending on if the person was enrolled that month.
I'm being asked to generate a table like this:
ID_________ Start_Date End_Date
0000030257 July 1, 2014 Nov 30, 2014
Is there some slam dunk way to do this without a bunch of If/Then statements?
The editor compressed all my space fields, so the column headers are off in some places.
CREATE TABLE #MyTable
(
Teams VARCHAR(10),
StartDate DATETIME,
Count INT
)
INSERT INTO #MyTable (Teams,StartDate,Count)
SELECT 'Team A', '01/01/2014',10
[Code] ....
'Team A' Has No records for '01/02/2014' and '01/03/2014' so I need to insert values of '01/01/2014' StartDate for Team A for the missing dates
So 'Team A' will now have 3 records
Team A2014-01-01 00:00:00.00010
Team A2014-01-02 00:00:00.00010
Team A2014-01-03 00:00:00.00010
'Team B' Has No records for '01/03/2014' so I need to insert values of '01/02/2014' StartDate for Team B for the missing date
So 'Team B' will now have 3 records
Team B2014-01-01 00:00:00.00030
Team B2014-01-02 00:00:00.00040
Team B2014-01-03 00:00:00.00040
As for 'Team C' we have values for all 3 dates, no inserts needed.
Suppose that I have a table with following values
Table1
Col1 Col2 Col3
-----------------------------------------------------------
P3456 C935876 T675
P5555 C678909 T8888
And the outcome that I want is:
CombinedValues(ColumnName)
----------------------------------------------
P3456 - C935876 - T675
P5555 - C678909 - T8888
where CombinedValues column contains values of coulmn 1,2 & 3 seperated by '-'
So is there any way to achieve this?
I need to list customers in a table that represents sales over the years.
I have tables:
Customers -> id | name |...
Orders -> id | idCustomer | date | ...
Products -> id | idOrder | unitprice | quantity | ...
I am using this SQL but it only gets one year:
SELECT customers.name , SUM(unitprice*qt) AS total
FROM Products
INNER JOIN Orders ON Orders.id = Products.idOrder
INNER JOIN Customers ON Customers.id = Orders.idCustomer
WHERE year(date)=2014
GROUP BY customers.name
ORDER BY 2 DESC
I need something like this:
customer | total sales 204 | total sales | 2015 | total sales (2014 + 2015)
--------
customer A | 1000$ | 2000$ | 3000$
customer B | 100$ | 100$ | 200$
Is it possible to retrieve these values in a single SQL query for multiple years and grand total?
I have this SP
ALTER PROCEDURE GetDelayIntervalData(@start datetime, @stop datetime, @step int)
AS
DECLARE @steps bigint
SET @steps = DATEDIFF(hour, @start, @stop)/ @step
DECLARE @i bigint
SET @i=0
[Code] ....
I have resulting rows from a query similar to the following:
The data is coming from a single table that contains only one coverage code column and one coverage code date, but the end user wants the two coverage code types and dates combined into a single row. So the SELECT looks something like this:
SELECT
[Employee ID] = emp.employee_id,
[Coverage Code 1] = enr.coverage_code,
[Coverage Date 1] = enr.coverage_date,
[Coverage Code 2] = case when enr.product_type = 'Accident.Accident'
then enr.coverage_code else NULL end,
[Code] ....
I basically want to merge the like Employee ID's together into a single row like the following:
I know I have done this before and it is probably pretty simple.
I am looking a script which allow me add single coilumn to multiple table of my database.
For Example :-
I am having 4 table
1-Emp , 2-Dept , 3-Location , 4-Salary like this I have around 100 of table
Now I want to run below command to add column Rowchecksum in all table where table name start with Archivebbx keywords.
Alter table EMP
Add Rowchecksum varbinary(8000)
So I have been trying to get mySQL query to work for a large database that I have. I have (lets say) two tables Table_One and Table_Two. Table_One has three columns: Type, Animal and TestID and Table_Two has 2 columns Test_Name and Test_ID. Example with values is below:
**TABLE_ONE**
Type Animal TestID
-----------------------------------------
Mammal Goat 1
Fish Cod 1
Bird Chicken 1
Reptile Snake 1
Bird Crow 2
Mammal Cow 2
Bird Ostrich 3
**Table_Two**
Test_name TestID
-------------------------
Test_1 1
Test_1 1
Test_1 1
Test_1 1
Test_2 2
Test_2 2
Test_3 3
In Table_One all types come under one column and the values of all Types (Mammal, Fish, Bird, Reptile) come under another column (Animals). Table_One and Two can be linked by Test_ID
I am trying to create a table such as shown below:
Test_Name Bird Reptile Mammal Fish
-----------------------------------------------------------------
Test_1 Chicken Snake Goat Cod
Test_2 Crow Cow
Test_3 Ostrich
This should be my final table. The approach I am currently using is to make multiple instances of Table_One and using joins to form this final table. So the column Bird, Reptile, Mammal and Fish all come from a different copy of Table_one.
For e.g
Select
Test_Name AS 'Test_Name',
Table_Bird.Animal AS 'Birds',
Table_Mammal.Animal AS 'Mammal',
Table_Reptile.Animal AS 'Reptile,
Table_Fish.Animal AS 'Fish'
From Table_One
[Code] .....
The problem with this query is it only works when all entries for Birds, Mammals, Reptiles and Fish have some value. If one field is empty as for Test_Two or Test_Three, it doesn't return that record. I used Or instead of And in the WHERE clause but that didn't work as well.
Here is my table:
My question is: How can I insert a row for each unique TemplateId. So let's say I have templateIds like, 2,5,6,7... For each unique templateId, how can I insert one more row?
So I have a problem with combining cells: some of the cells are blank and some of the cells have NULL value.
The combined blank cells return perfect.
But the combined cells in which 1 or more contains NULL will return as NULL
0-4139-00-01OPTIONAL EQUIPMENT 139 - A -
0-4139-00-02NVG EQUIPMENT 139 - A -
0-4139-00-03NVG EQUIPMENT 139 - A -
0139-01-01BRAKE RESERVOIR NULL
A part of the script which i use is:
STUFF((SELECT ', ' + i.ac_type + ' - '
+ i.range_or_single+ ' ' + ' - ' + i.serialno_to
FROM msc_item_effectivity i
inner JOINmsc_item h
ONb.taskcard_verno_i = h.taskcard_verno_i
WHERE h.itemno_i = i.itemno_i
FOR XML PATH('')), 1, 1, '')
i.ac_type = 139
i.range_or_single = A
i.serialno_to = blank or NULL
I want the result of the blank value to be the same as the NULL value.
0139-01-01BRAKE RESERVOIR 139 - A -
I am planning to add some new columns to an existing sql server 2012 table. I know that I need to use the alter statement to accomplish this goal. However my questions is the location of where I want to add the new columns to the table. It would make more sense to add the new columns to the middle of the table since these columns have a similar meaning as other columns in the middle of the table.
However is it better to add these new columns at the end of the table? I am asking this question since I am thinking I might need some sql to move the values of existing columns and values around?
Thus is it better to add new columns to a table in the middle of the table, at the end of the table, or at the end of the table? If so, why one location is better than another location?
I have table like below.
filename col1 col2 col3
ABD Y NULL Y
XYZ Y Y Y
CDZ Y Y Y
I Need a output like this
filename col1 col2 col3 Group
ABD Y NULL Y Group1
XYZ Y Y Y Group2
CDZ Y Y Y Group2
I wanted to group the col1 , col2, col3 and group it as same group.
I want Compare two Table data and insert changed field to the third table ...
View 9 Replies View RelatedHi,ALL
I wants to insert data into multiple table within a single insert query
Thanks
I have a table with 8 columns, I need to update data in multiple columns on this table, this table contains 1 million records, having single update was taking time so I broke the single update into multiple update statements and running multiple update statements in parallel, Each update statement updates different column.
This approach is working fine but I am getting the deadlock error.
Transaction (Process ID 65) was deadlocked on lock | communication buffer resources with another process and has been chosen as the deadlock victim. Rerun the transaction.
I tried with various lock hints but no success.