how can i put multiple values in the variables.
for eg:
Declare @w_man as varchar
set @w_man = ('julial','BEVERLEYB', 'Lucy') and few more names.
I am getting syntax error(,)
Hello all,I'm trying to request a number of URLS (one for each user) from my database, then place each of these results into a separate string variables. I believed that SqlDataReader could do this for me, but I am unsure of how to accomplish this, or if I am walking down the wrong road. The current code is below (the section in question is in bold), please ignore the fact that I'm using MySQL as the commands work in the same way. public partial class main : System.Web.UI.Page{ String UserName; String userId; String HiveConnectionString; String Current_Location; ArrayList Location; public String Location1; public String Location2; public String Location3; //Int32 x = 0; private void Page_Load(object sender, EventArgs e) { if (User.Identity.IsAuthenticated) { UserName = Membership.GetUser().ToString(); userId = Membership.GetUser().ProviderUserKey.ToString(); HiveConnectionString = "Database=hive;Data Source=localhost;User Id=hive_admin;Password=West7647"; using (MySql.Data.MySqlClient.MySqlConnection conn = new MySql.Data.MySqlClient.MySqlConnection(HiveConnectionString)) { // Map Updates MySql.Data.MySqlClient.MySqlCommand Locationcmd = new MySql.Data.MySqlClient.MySqlCommand( "SELECT Location FROM tracker WHERE Location = IsOnline = '1'"); Locationcmd.Parameters.Add("?PKID", MySql.Data.MySqlClient.MySqlDbType.VarChar, 255).Value = userId; Locationcmd.Connection = conn; conn.Open(); MySql.Data.MySqlClient.MySqlDataReader LocationReader = Locationcmd.ExecuteReader(); while (LocationReader.Read()) { Location1 = LocationReader.GetString(0); //Location2 = LocationReader.GetString(1); // This does not work.. } LocationReader.Close(); conn.Close(); // IP Display MySql.Data.MySqlClient.MySqlCommand Checkcmd = new MySql.Data.MySqlClient.MySqlCommand( "SELECT UserName FROM tracker WHERE PKID = ?PKID"); Checkcmd.Parameters.Add("?PKID", MySql.Data.MySqlClient.MySqlDbType.VarChar, 255).Value = userId; Checkcmd.Connection = conn; conn.Open(); object UserExists = Checkcmd.ExecuteScalar(); conn.Close(); if(UserExists == null) { MySql.Data.MySqlClient.MySqlCommand Insertcmd = new MySql.Data.MySqlClient.MySqlCommand( "INSERT INTO tracker (PKID, UserName, IpAddress, IsOnline) VALUES (?PKID, ?Username, ?IpAddress, 1)"); Insertcmd.Parameters.Add("?IpAddress", MySql.Data.MySqlClient.MySqlDbType.VarChar, 15).Value = Request.UserHostAddress; Insertcmd.Parameters.Add("?Username", MySql.Data.MySqlClient.MySqlDbType.VarChar, 255).Value = UserName; Insertcmd.Parameters.Add("?PKID", MySql.Data.MySqlClient.MySqlDbType.VarChar, 255).Value = userId; Insertcmd.Connection = conn; conn.Open(); Insertcmd.ExecuteNonQuery(); conn.Close(); } else { MySql.Data.MySqlClient.MySqlCommand Updatecmd = new MySql.Data.MySqlClient.MySqlCommand( "UPDATE tracker SET IpAddress = ?IpAddress, IsOnline = '1' WHERE UserName = ?Username AND PKID = ?PKID"); Updatecmd.Parameters.Add("?IpAddress", MySql.Data.MySqlClient.MySqlDbType.VarChar, 15).Value = Request.UserHostAddress; Updatecmd.Parameters.Add("?Username", MySql.Data.MySqlClient.MySqlDbType.VarChar, 255).Value = UserName; Updatecmd.Parameters.Add("?PKID", MySql.Data.MySqlClient.MySqlDbType.VarChar, 255).Value = userId; Updatecmd.Connection = conn; conn.Open(); Updatecmd.ExecuteNonQuery(); conn.Close(); } } } } Can anyone advise me on what I should be doing (even if its just a "you should be using this command) if this is not correct? In fact any pointers would be nice !Thanks everyone!
View 1 Replies View RelatedVery basically, I need to return a result set based on another value and only if there are multiples of that other value.
Example. select * from mytable
Returns (--column separater)
John---1---1
John---1---1
John---2---2
John---3---3
John---3---3
John---4---4
So I want a query that would return only
John---1---1
John---1---1
John---3---3
John---3---3
The query cannot be something as simple as this:
Select * from mytable where John=1 or John=3
I have to many possible results to plan like that. I am thinking some kind of aggregate with a group.
All I have a table full of invoices and in that table there is a field named HCC. An invoice can contain multiple HCC's. I also have a table named hierarchical codes (below is an example)
(COL1)HCC...........(COL2)If any of the HCCs in this column exist on an invoice along with the HCC in column 1 then use HCC listed in column one
1
2
3.......................4
4
6
8.......................9 ,10 ,11 ,12 ,13
[code]...
I want to return invoice 1 with HCC set to 34 since the hierarchy for when any of these HCCs (35 ,36 ,37 ,38) exist on an invoice along with 34 is 34.
I need one query...
create table #task(TaskId bigint unique, Name varchar(2000))
insert into #task values(1, 'Text Text Text Text Text Text Text <<Name>> Text Text Text <<Salary>>')
insert into #task values(2, 'Text Text Text <<Name>> Text Text Text Text <<Company>> Text Text Text <<Salary>> Text Text Text')
-- select * from #task
[Code] ....
Now I need to create an inline function who resolve the task name with appropriate values and return me the resolved task name
select * from fn_TaskResolver(1, 'Text Text Text Text Text Text Text <<Name>> Text Text Text <<Salary>>')
I try this function but its return multiple rows as i just want to return one row. as I have big data set so i don't want to use scaler or Multi Line function.
create function fn_TaskResolver(@TaskId bigint, @name varchar(2000)
Return table
as
return
(
with data as
[Code] ....
I know how to check for a sinle vlaue but how do I chekc to see if multiple values exist. I need to check for certain email addresses from a list that I have.
Let us say I ahve 3 email addresses, I want to check for all of them in a table and for eevery email address that is present I want to print something like "You email address is XXX" and if one of those 3 is not found my results should look like
"You email address is XXX"
YYYYY not found
"You email address is ZZZZ"
I'm attaching some TSQL that I tried on [AdventureWorks2012].[Person].[EmailAddress]
/****** Select ALL if where an email address is present in the list ******/
SELECT EmailAddressID,EmailAddress
FROM [AdventureWorks2012].[Person].[EmailAddress]
WHERE EmailAddress IN
(
'ken0@adventure-works.com', --1
'terri0@adventure-works.com', --2
[Code] ....
-- Test to see if a single email address is present
IF EXISTS
(
SELECT EmailAddress FROM [AdventureWorks2012].[Person].[EmailAddress]
WHERE EmailAddress IN ('25rob0@adventure-works.com')
)
BEGIN
SELECT 'Email address is presnt'
[Code] ....
When I check multiples using EXISTS it works as per its design and says YES even if a single item is present.
Atm this is my Test SQL String
"INSERT INTO tblPDFFiles (fileType, PDFcontent) SELECT 'Test' AS Expr1, BulkColumn FROM OPENROWSET(BULK 'F:websitesTESTarchived est.pdf', SINGLE_BLOB) AS BLOB"
When I try to put in a variable as follws
"INSERT INTO tblPDFFiles (fileType, PDFcontent) SELECT '" + @[User::MyFileValue] + "' AS Expr1, BulkColumn FROM OPENROWSET(BULK 'F:websitesTestarchived est.pdf', SINGLE_BLOB) AS BLOB"
I keep getting errors Saying it contains an illegal escape sequence of w any ideas ?
Btw the above is used as an expression
Hi, figured out where I was going wrong in my post just prior, but isthere ANY way I can assign several variables to then use them in anUpdate statement, for example (this does not work):ALTER PROCEDURE dbo.UpdateXmlWF(@varWO varchar(50))ASDECLARE @varCust VARCHAR(50)SELECT @varCust = (SELECT Customer FROM tblWorkOrdersWHERE WorkOrder=@varWO)DECLARE @varAssy VARCHAR(50)SELECT @varAssy=(SELECT Assy FROM tblWorkOrdersWHERE WorkOrder=@varWO)UPDATE statement here using declared variables...I can set one @variable but not multiple. Any clues? kinda new tothis.Thanks,Kathy
View 2 Replies View RelatedNeed getting data into XML format as shown in the last code block.The datatypes and table structures are pretty much fixed, but I can re-hash data into another Temp Table, CTE, etc..This is a server running SQL Server 2012, but I'd guess any version that understands FOR XML PATH should be fine.
Source tables and data
if object_id('Tempdb..#Element1') is not null drop table #Element1;
create table #Element1 (
[Attr1] varchar(10)
,[Attr2] varchar(4)
[code]...
How do I write a query using the split function for the following requirement.I have a table in the following way
Identity Name Col1 Col2 Col3
1 Test1 1,2,3 200,300,400 3,4,6
2 Test2 3,4,5 300,455,600 2,3,8
I want an output in the following format
Identity Name Col1 Col2 Col3
1 Test1 1 200 3
1 Test1 2 300 4
1 Test1 3 400 6
2 Test2 3 300 2
2 Test2 4 455 3
2 Test2 5 600 8
If you see the data, first element in col1 is matched to first element in col2 and 3 after splitting the string.
I am trying to create a query that outputs the following data from multiple tables. Here is an example of the raw data right now
Date | MachineNumber | TestName
---------------------------------------
1/1/2015 | 500 | Something
1/1/2015 | 500 | Something
1/1/2015 | 500 | Something
1/1/2015 | 500 | Something
1/1/2015 | 510 | NewTest
1/1/2015 | 510 | NewTest
1/1/2015 | 510 | NewTest
1/1/2015 | 620 | Test#1
Here is the desired counted output, I would like to pull distinct Date, MachineNumber, TestName and then count how many times they occur in the raw data form.I do need to perform a case on the date because right now its in a datetime format and I only need the date.
Date | MachineNumber | TestName | TestOccuranceCount
-----------------------------------------------------------------
1/1/2015 | 500 | Something | 4
1/1/2015 | 510 | NewTest | 3
1/1/2015 | 620 | Test#555 | 1
I am pulling three columns with the same names from 8 different tables. What I need to display the date, machine & test name and count how many times a test was run on a machine for that date. I have a feeling this can be handled by SSAS but haven't built an analysis cube yet because I am unfamiliar with how they work. I was wondering if this is possible in a simple query. I tried to set something up in a #Temp table. Problem is the query takes forever to run because I am dealing with 1.7 Million rows. Doing an insert into #temp select columnA, columnB, columnC from 8 different tables takes a bit.
how we can replace the multiple values in a single select statement? I have to build the output based on values stored in a table. Please see below the sample input and expected output.
DECLARE @V1 NVARCHAR(100)
SELECT @V1 = 'FirstName: @FN, LastName: @LN, Add1: @A1, Add2: @A2 '
DECLARE @T1 TABLE
(FN VARCHAR(100), LN VARCHAR(100), A1 VARCHAR(100), A2 VARCHAR(100))
[code]....
The objective is to identify orders where an order fee has been applied incorrectly. I have multiple orders per customer, my table contains an orderID and a customerID. Currently if the customer places additional orders before the previous orders have been closed/cancelled, then additional fees are being applied.
Let's say I'm comparing order #1 to order #2. I need to identify these rows where the following is true:-
The CustID is the same.
Order #2 has a more recent order date.
Order #2 has a FeeDate Before the CancelledDate of Order #1 (or Order #1 has no cancellation date).
So in the table the orderID:2835692 of CustID: 24643 has a valid order fee. But all the subsequently placed orders have fees which were applied before the first order was cancelled and so I want to update the FeeInvalid column with a 'Y'. The first fee will always be valid.
I think I understand why the code I am trying doesn't achieve the result I want but I can't figure out how to write it correctly. Below is one example of code I've tried and also code to create the table and insert some test data.
update t1
SET FeeInvalid = 'Y'
FROM MockData t1 Join MockData t2 on t1.CustID = t2.CustID
WHERE t1.CustID = t2.CustID
AND t2.OrderDate > t1.OrderDate
AND t2.FeeDate > t1.CancelledDate
CREATE TABLE [dbo].[MockData](
[OrderID] [float] NULL,
[code]....
KB Article 906547 suggest that it's possible to have system variables in the Subject & Body of a Send Email Task. Such as this:
"Package>>> " + @[System::PackageName] +" was executed at>>> " + (DT_WSTR, 40) @[System::StartTime] + " by user>>> " + @[System::UserName] + " on Machine>>> " + @[System::MachineName]
Or this in an OnError event handler:
"Error in the task: " + @[System::SourceName] + "with the ID: " + @[System::SourceID] + " has failed at: " + (DT_WSTR, 20) @[System::ContainerStartTime] + "."
But when I do this I just get this exact text, no variables.
I'm obviously missing something basic but I can't find it. Can anyone offer a suggestion please?
Can I assign values to variables in 2012 using below command? I have used the same command in 2008 and it works fine.
DTEXEC
/SERVER"XXXXXXXXSQLSERVER2012"/SQL"Mypackage.dtsx"/SETPackage.Variables[FilePath].Value;"C:Test estvariable.csv"
Wondering is there a different way in 2012 to pass values to variables dynamically.
I need to list customers in a table that represents sales over the years.
I have tables:
Customers -> id | name |...
Orders -> id | idCustomer | date | ...
Products -> id | idOrder | unitprice | quantity | ...
I am using this SQL but it only gets one year:
SELECT customers.name , SUM(unitprice*qt) AS total
FROM Products
INNER JOIN Orders ON Orders.id = Products.idOrder
INNER JOIN Customers ON Customers.id = Orders.idCustomer
WHERE year(date)=2014
GROUP BY customers.name
ORDER BY 2 DESC
I need something like this:
customer | total sales 204 | total sales | 2015 | total sales (2014 + 2015)
--------
customer A | 1000$ | 2000$ | 3000$
customer B | 100$ | 100$ | 200$
Is it possible to retrieve these values in a single SQL query for multiple years and grand total?
hi guys,
Could any one tell me whats the best way to put encypted data into a table.i have a textfield that a single integer is entered into it. It is then encrypted using DES encrption algorithim.It converts the value to byte(Convert2ByteArray method) I pass the data to a stored procedure which converts it to char before inserting it into the table. when i checked the database all it entered was System.Byte[]. Does anyone know where im goin wrong?
Mairtin
I have a pivot transform that it believe is configured correctly but is not distributing the values accross the columns on the same row. for example.
input:
id seqno codevalue
1 A red
1 B red
2 C blue
2 A green
2 B violet
3 A green
desired output:
id Seq_A Seq_B Seq_C
1 red red null
2 green violet blue
3 green null null
what I am getting:
id Seq_A Seq_B Seq_C
1 red null null
1 null red null
2 green null null
2 null violet null
2 null null blue
3 green null null
I do have the pivot usage for the id column set to 1. I have the pivot usage for seqno column set to 2 and codevalue column set to 3. I have the source column for each of the output columns set to the lineageID of the apprpriate input columns. I have the pivotKey values set for each of the destination columns. A for column Seq_A, B for column Seq_B, C for column Seq_C. All four columns have sortkey positions set; 1 for id, 2 for Seq_A, 3 for Seq_B and 4 for column SEQ_C.
It seems like the id column's pivot usage is not set to 1 like it should but when I check it is 1.
I also have several other pivot transforms in the same data flow and they are working as expected.
I have a suspicion that there is some hidden meta data that is messed up that is over-ridding my settings (just my guess) I have deleted this transform and re-done it several times, checking each configuration value, but still getting the same result.
Need some help or thoughts on making this work.
Thanks
Hello,
This may be a strange request, but I am going to ask about it anyways.
Say for example if I have a table named TEST and in the table there is a column named NUMBERS, such that it is like this:
NUMBERS
1
2
3
4
How could I use a select statement in a way that a comma would seperate every return value, such that if I go 'Select NUMBERS from TEST' I would get:
1,2,3,4
Instead of:
1
2
3
4
Any ideas?
Thanks
In a t-sql 2012, I want to declare variables with multiple values and I am having problems since sql server thinks I am working with numbers when I am really working with character and bit values. Here is a copy of the sql that I am trying to use:
DECLARE @Account varchar(100)
DECLARE @Processed bit
set @Account = '58100,98326,09897'
set @Processed ='0,1'
Thus would you show me what I can do so that the sql server knows that I want the values in the set states above to be varchar or character value for @Account and bit value for @Processed?
Hi,
I would like to design a SSIS package, which have couple of variables. It loads a xls file specified in a variable [varExcelFileFullPath] .
I will run it by commands: exec xp_cmdshell 'dtexec /SQL ....' (pls see an example below).
It seems it does not get the values passed in for those variables. I deployed the package to a sql server.
are there any grammar errors here? I copied it from dtexecui. It worked inside Dtexecui not in dos command.
exec xp_cmdshell 'dtexec /SQL "LoadExcelDB" /SERVER test /USER *** /PASSWORD ****
/MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING EW
/LOGGER "{6AA833A1-E4B2-4431-831B-DE695049DC61}";"Test.SuperBowl"
/Set Package.Variables[User::varExcelFileName].Properties[Value];"TestAdHocLayer"
/Set Package.Variables[User::varExcelWorkbookName].Value;"Sheet1$"
/Set Package.Variables[User::varExcelFileFullPath].Value;"D: estshareTestAdHocLayer.xls"
/Set Package.Variables[User::varDestinationTableName].Value;"FeaturesTmp"
/Set Package.Variables[User::varPreSQLAction].Value;"delete from FeaturesTmp"
'
thanks,
Guangming
I created a query that got the following result. But I expect to get the structure like, care_nbr, cust_nbr,legal_name, address_type=physical address, addr_line_1, addr_line_2, address_type-primary address, ddr_line_1, addr_line_2. That means I only need primary and physical address, and expect them to show in a row to each care_nbr. How to perform that?
CARE_Nbr||Cust_Nbr||Legal_Name||||||| Address_Tpye |||Addr_Line_1 ||||||||||||||||Addr_Line_2
99000001||004554||Mac Marketing, LLC||Billing Address||210 Parktowne Blvd Ste. 1||NULL
99000001||004554||Mac Marketing, LLC||Mailing Address||210 Parktowne Blvd Ste. 1||NULL
99000001||004554||Mac Marketing, LLC||Primary Address||210 Parktowne Blvd Ste. 1||NULL
99000001||004554||Mac Marketing, LLC||Physical Address||210 Parktowne Blvd Suite 1||NULL
My script is here, and the sample result is attached. How should I modify this query to get my expected result?
select a.CARE_Number,
a.Customer_Nbr_Txt,
a.Customer_Type_Txt,
a.Legal_Name_Txt,
c.Address_Type_Txt,c.Address_Line_1_Txt,c.Address_Line_2_Txt,
a.Customer_Status_Txt,
a.Legal_Entity_Type_Txt,
a.Business_Unit_Txt
FROM dw_mart.dbo.DimCustomer a
[code]....
First of all i do not know whether this is the right form to ask the question Let me describe the scenario iam using Iam generating xml files at a particular place and sending them to a server xml1|--------------------->dataset1------------------------------>adapter1.update(dataset1)xml2|----------------------->dataset2----------------------------->adapter2.update(dataset2)xml3|----------------------->dataset3------------------------------>adapter3.update(dataset3) all the three updates should happen in only one transaction if any one of the update fails then the transaction should rollbackcan anyone tell me a way to do iti am desperately in search of any ways to do it can anybody help please
View 2 Replies View RelatedI have a table that lists math Calculations with "User Friendly Names" that look like the following:
([Sales Units]*[AUR])
([Comp Sales Units]*[Comp AUR])
I need to replace all the "User Friendly Names" with "System Names" in the calculations, i.e., I need "Sales Units" to be replaced with "cSalesUnits", "AUR" replaced with "cAUR", "Comp Sales Units" with "cCompSalesUnits", and "Comp AUR" with "cCompAUR". (It isn't always as easy as removing spaces and added 'c' to the beginning of the string...)
The new formulas need to look like the following:
([cSalesUnits]*[cAUR])
([cCompSalesUnits]*[cCompAUR])
I have created a CTE of all the "Look-up" values, and have tried all kinds of joins, and other functions to achieve this, but so far nothing has quite worked.
How can I accomplish this?
Here is some SQL for set up. There are over 500 formulas that need updating with over 400 different "look up" possibilities, so hard coding something isn't really an option.
DECLARE @Synonyms TABLE
(
UserFriendlyName VARCHAR(128)
, SystemNames VARCHAR(128)
)
INSERT INTO @Synonyms
( UserFriendlyName, SystemNames )
[Code] .....
I am trying to create a report using Reporting Services.
My problem right now is that the way the table is constructed, I am trying to pull 3 seperate values i.e. One is the number of Hours, One is the type of work, and the 3rd is the Grade, out of one column and place them in 3 seperate columns in the report.
I can currently get one value but how to get the information I need to be able to use in my reports.
So far what I've been working with SQL Reporting Services 2005 I love it and have made several reports, but this one has got me stumped.
Any help would be appreciated.
Thanks.
I might not have made my problem quite clear enough. My table has one column labeled value. The value in that table is linked through an ID field to another table where the ID's are broken down to one ID =Number of Hours, One ID = Grade and One ID= type of work.
What I'm trying to do is when using these ID's and seperate the value related to those ID's into 3 seperate columns in a query for using in Reporting Services to create the report
As you can see, I'm attempting to change the name of the same column 3 times to reflect the correct information and then link them all to the person, where one person might have several entries in the other fields.
As you can see I can change the names individually in queries and pull the information seperately, it's when roll them altogether is where I'm running into my problem
Thanks for the suggestions that were made, I apoligize for not making the problem clearer.
Here is a copy of what I'm attempting to accomplish. I didn't have it with me last night when posting.
--Pulls the Service Opportunity
SELECT cs.value AS "Service Opportunity"
FROM Cstudent cs
INNER JOIN cattribute ca ON ca.attributeid = cs.attributeid
WHERE ca.name = 'Service Opportunity'
--Pulls the Number of Hours
SELECT cs.value AS 'Number of Hours'
FROM Cstudent cs
INNER JOIN cattribute ca ON ca.attributeid =cs.attributeid
WHERE ca.name ='Num of Hours'
--Pulls the Person Grade Level
SELECT cs.value AS 'Grade'
FROM Cstudent cs
INNER JOIN cattribute ca ON ca.attributeid =cs.attributeid
WHERE ca.name ='Grade'
--Pulls the Person Number, First and Last Name and Grade Level
SELECT s.personnumber, s.lastname, s.firstname, cs.value as "Grade"
FROM student s
INNER JOIN cperson cs ON cs.personid = s.personid
INNER JOIN cattribute ca ON ca.attributeid = cs.attributeid
WHERE cs.value =(SELECT cs.value AS 'Grade'
WHERE ca.attributeid = cs.attributeid AND ca.name='Grade')
we can assign one parameter value for each excecution of [SSISDB].[catalog].[set_object_parameter_value] by calling this catalog procedure..
Example: If I have 5 parameters in SSIS package ,to assign a value to those 5 parameters at run time should I call this [SSISDB].[catalog].[set_object_parameter_value] procedure 5 times ? or is there a way we can pass all the 5 parameters at 1 time .
1. Wondering if there is a way to pass multiple parameters in a single execution (for instance to pass XML string values ??)
2.What are the options to pass multiple parameter values to ssis package through stored procedure.?
I'm rewriting a huge FOR XML EXPLICIT procedure to use FOR XML PATH, and need to compare previous output to the refactored one, so i didn't mess up XML structure.
The thing is, i'm not sure that SQL Server will always generate exactly same xml **string**, so i'd rather not compare by:
WHERE CAST(@xml_old AS NVARCHAR(MAX)) = CAST(@xml_new AS NVARCHAR(MAX))
nor do i want to manually validate every node, since the generated xml-structure is quite complex.
compare xmls by their "semantic value" ?
I have three variables
DECLARE @QuantityID uniqueidentifier,
@LengthID uniqueidentifier,
@CostID uniqueidentifier
They are sent to the sproc as null. Since they could be null I need to exclude them from posting to a temp table
Example
DECLARE @QuantityID uniqueidentifier,
@LengthID uniqueidentifier,
@CostID uniqueidentifier
SET @CostID = NEWID()
SELECT @QuantityID as ID UNION ALL
SELECT @LengthID UNION ALL
SELECT @CostID
Two values are null. I want those excluded from this table
Here is the example of what I am trying to do:
DECLARE @QuantityID uniqueidentifier,
@LengthID uniqueidentifier,
@CostID uniqueidentifier
DECLARE @Temp as Table (id uniqueidentifier NOT NULL Primary key)
SET @CostID = NEWID()
INSERT INTO @Temp
SELECT @QuantityID as ID UNION ALL
SELECT @LengthID UNION ALL
SELECT @CostID
How do I insert into @Temp only non null values?
I am trying to use variables to generate the command:
USE DATABASE
GO
Code below:
DECLARE @DBName_Schema varchar(500)
SET @DBName = 'Test'
EXEC ('USE ' + @DBName )
GO
It does not seem to be working.
What i need is to create a function that compares 2 strings variables and if those 2 variables doesn't have at least 3 different characters then return failure , else return success.
View 9 Replies View RelatedI am writing a custom query to determine if a legacy table exists or not. From My CMS Server I already have all the instances I have to query and I store the name of the instance in the @Instance variable. I cannot get those stubborn ticks to work right in my query. Below I am using the IF EXISTS statement to search the metadata for the legacy table.
DECLARE @Found tinyint
DECLARE @Instance varchar(100)
set @Instance = 'The Instance'
IF (EXISTS (SELECT a.*
FROM OPENROWSET('SQLNCLI', 'Server=' + @Instance + ';UID=DBAReader;PWD=DBAReader;','SELECT * FROM [DBA].INFORMATION_SCHEMA.TABLES WHERE TABLE_NAME = ''TheTable''') AS a))
SET @Found = 1
ELSE
SET @Found = 0
PRINT @Found
I concatenate multiple rows from one table in multiple columns like this:
--Create Table
CREATE TABLE [Person].[Person_1](
[BusinessEntityID] [int] NOT NULL,
[PersonType] [nchar](2) NOT NULL,
[FirstName] [varchar](100) NOT NULL,
CONSTRAINT [PK_Person_BusinessEntityID_1] PRIMARY KEY CLUSTERED
[Code] ....
This works very well, but I want to concatenate more rows with different [PersonType]-Values in different columns and I don't like the overhead, of using the same table in every subquery ([Person_1]). Is there a more elegant way to do this, without using a temp table or something else?
know a way to find all stored procedures that use declared or temp tables, i.e
Declare @temptable TABLE as....
Create table #temptable